Chemistry Commons^™

Studying The Stability Of Collagen/Heparin Coatings To Be Used In Cell Therapy Applications, Gavin Mussino

Biological Sciences Undergraduate Honors Theses

This honors thesis aims to investigate the reusability and performance of cell coatings for cell therapy applications. Cell therapy, which involves the use of human cells to repair or replace damaged tissues, holds immense potential for medical advancements. However, ensuring the survival and functionality of transplanted cells remains a significant challenge. We focused on studying the effectiveness of coatings applied to cells for improved cell growth and viability. The research project involved the preparation of the coatings using a layer-by-layer method and the subsequent seeding of cells. The coated cells were then subjected to a series of experiments to assess …

Poly(Ionic Liquid)S For Magnetic, Ionic, And Electrical Stimuli-Responsive Applications, Kayla Ann Foley

Graduate Theses and Dissertations

Poly(ionic liquid)s (PILs) are a fascinating subclass of strong polyelectrolytes formed from polymerizable ionic liquids. As a result of their unique properties and counterion exchangeability, PILs can exhibit conformation structure or material property changes in response to external stimuli such as changes in pH/ionic environment, magnetic fields, and electric potentials. In Chapter 1, a comprehensive review of PILs design as well as their stimuli-responsive behavior is provided. Additional motivation for each dissertation chapter is also discussed. In Chapter 2, magnetically responsive PILs (MPILs) are developed from complexing paramagnetic salts with a random PIL copolymer containing a metal-coordinating co-monomer, acrylamide. A …

Dpd Guided Insight On The Formation Process Of Polyethersulfone Membranes By Nonsolvent Induced Phase Separation And The Effects Of Additives, Eric Ledieu

Graduate Theses and Dissertations

Dissipative particle dynamics (DPD), a coarse grain simulation method, was applied to the membrane formation process of non-solvent induced phase separation (NIPS) to gain further insight on the mechanism of certain variables and how they affect the final morphology. NIPS involves two solutions, an organic polymer dissolved in an organic solvent colloquially called the dope and an aqueous coagulation bath, brought into contact with one another. The solvents then mix, causing the polymer to fall out of solution as an asymmetric membrane with a dense surface layer and a more open subsurface layer in response to the decreasing solubility. Polyethersulfone …

Separation Of Organic Acids Through Direct Catalysis From Sugars, Katelyn Robinson

Chemical Engineering Undergraduate Honors Theses

Society relies on plastic products, whether they are single use or durable. A downside of plastic is that the most common type is a product of oil and oil is not only a limited resource but also a climate-damaging resource. Polylactic acid (PLA) is a bio-based, biodegradable plastic. However, the process of converting biomass to polylactic acid polymer has the largest environmental impact of the PLA production process, so alternative methods of conversion are needed (Moretti et al., 2021). The polylactic acid polymer can be made with lactic acid, which can be converted from glucose.

Synthesis Of Polyethylene Glycol-Based Hydrogels And Silver/Gold Nanostructures For Biomedical Applications, Isabelle Ishimwe Niyonshuti

Graduate Theses and Dissertations

This work focuses on the synthesis of biocompatible polyethylene glycol (PEG)-based hydrogels, silver nanoparticles (AgNPs), and silver-gold nanocages (Ag-AuNCs) for biomedical applications. The dissertation includes two parts with Part I on the work of PEG-based hydrogel for wound healing applications and Part II on the work of Ag/Au nanostructures for antimicrobial applications. Part I studies PEG-based hydrogel for the delivery of fibroblast growth factors (FGFs) for wound healing applications, aiming to overcome the challenge of designing hydrogels capable of the sustained release of bioactive FGFs. This research develops new biocompatible anionic injectable hydrogel formulations based on Poly (Oligo Ethylene Glycol …

Development Of Biomaterials For Drug Delivery, Raquel De Castro

Graduate Theses and Dissertations

Drug delivery systems (DDS) have highly evolved in the last decades with the development of hydrogels and nanoparticles. However, high systemic uptake, side effects, low bioavailability, and encapsulation efficiency continue to be a major hurdle faced by such DDSs.

Nanoparticles and hydrogels can be specifically designed for targeted DDSs to mitigate some of the problems. This dissertation aimed to design two DDSs for ocular drug delivery and one for cancer treatment. The first project sought to develop chitosan nanoparticles (Cs-NP) using PEGDA as a copolymer to encapsulate gentamicin (GtS) for ocular drug delivery. Cs-NPs contain positive charges that can interact …

Thiophene Derivative Monomers Co-Electropolymerized On Microelectrodes Within Arrays For Tailored Surface Chemistry And Electrochemical Properties, Benjamin J. Jones

Graduate Theses and Dissertations

Potentiodynamic co-electropolymerization of two thiophene derivatives, (2,3-dihydrothieno[3,4-b]dioxin-2-yl)methanol (1) and 4-((2,3-dihydrothieno[3,4-b][1,4]dioxin-2-yl)-methoxy)-4-oxobutanoic acid (2), in aqueous solutions (0.02 M total monomer, 0.05 M sodium dodecyl sulfate (SDS) and 0.1 M LiClO4) on gold microband electrodes in an array was investigated. A modified Steglich esterification reaction between monomer 1 and succinic anhydride produced monomer 2 at 93.6% yield. Seven deposition solutions of the two monomers, defined by mol% of monomer 2 (0, 25, 34, 50, 66, 75, 100) generated seven sets of polymer films by cyclic voltammetry in a specially designed cell to conserve monomer. The onset potential for monomer oxidation and total …

Modification And Optimization Of Conducting Polymer-Modified, Redox-Magnetohydrodynamics (R-Mhd) Pumping For Enhanced And Sustained Microfluidics Applications, Md Foysal Zahid Khan

Graduate Theses and Dissertations

In this work, a novel microfluidic pumping approach, redox-magnetohydrodynamics (R-MHD) has improved by materials and device optimization to use in lab-on-a-chip applications. In R-MHD, magnetic flux (B) and ionic current density (j) interacts to generate body force (FB) in between active electrodes, according to the equation FB = j×B. This unique fluid pumping approach is scalable, tunable, generates flat flow profile, and does not require any channels or valves. Pumping performance, such as speed scales with the ionic current density (j) and duration depends on the total charge (Q). The ionic current density (j) results from the conversion of electronic …

Exploring Thermoresponsive Affinity Agents To Enhance Microdialysis Sampling Efficiency Of Proteins, Thaddeus Vasicek

Graduate Theses and Dissertations

Affinity agents increase microdialysis protein relative recovery, yet they have not seen widespread use within the microdialysis community due to their additional instrumentation requirements and prohibitive cost. This dissertation describes new affinity agents for microdialysis that require no additional instrumentation to use, have nearly 100% particle recovery, are 7 times more cost efficient than alternatives, and have low specificity enabling their use for a wide variety of proteins. Initially gold nanoparticles were chosen as an affinity ligand support due to their high surface area/volume ratio and colloidal stability. Poly (N-isopropylacrylamide) was immobilized to the gold nanoparticles, which served to sterically …

Direct Attachment Of 4-Hydroxybenzoic Acid Polymers And Capture Agents To Flat Sheet And Microdialysis Membranes For Improved Mass Transport, Sarah Jane Phillips

Graduate Theses and Dissertations

Microdialysis (MD) sampling is a diffusion-based separation method which has the ability to sample any analyte that can diffuse across the semi-permeable membrane. However one challenge for MD is that for soluble proteins greater than 10 kDa, the relative recovery (RR) using a 100 kDa MD probe is between 1-5%.1 There are two major barriers that lead to these low recovery values - nonspecific adsorption (NSA) and poor solute mass transport. To overcome these two barriers, the modification of PES-based MD membranes has been initiated by laccase. Previous researchers have used laccase to modify PES flat sheet and hollow fiber …

Synthesis Of Microgel Polymers As Catalysts, Hannah N. Miller

Chemistry & Biochemistry Undergraduate Honors Theses

New developments in organic synthesis show promise in achieving the best catalytic properties for the hydrolysis of glycosidic bonds through microgel polymers and transition metal complexes. A monomer mix of ethylene glycol dimethacrylate, butyl acrylate, and styrene form miniemulsion polymers after sonication and exposure to UV light. Gravimetrical analysis is used to determine the most suitable polymerization conditions by performing experiments at varying pH values, temperatures, monomer amounts, initiator amounts, and lamp heights. The final data show that the best polymerization conditions are a pH of 10.50 at 0°C with a high monomer ratio, 20% initiator amount, and a lamp …

Designing Magnetically Responsive Ultrafiltration Membranes, Robert William Dong

Graduate Theses and Dissertations

Ultrafiltration (UF) membranes developed out of a need for protein separation processes. Currently, they are used in a variety of industries ranging from food manufacturing to pharmaceuticals for two main purposes: concentration, separation, and buffer exchange. UF membrane processes in product streams undergo frequent use and like all membrane processes experience a gradual decline in performance due to fouling phenomena both irreversible and reversible. Ultimately, performance declines to a point where the UF membrane needs to be replaced. Frequent replacement of UF membranes is detrimental to major industries that require high product throughput using UF processes. Thus, it is important …

Modified-Electrodes For Redox-Magnetohydrodynamic (Mhd) Pumping For Microfluidic Applications, Christena Kayl Nash

Graduate Theses and Dissertations

A new microfluidic pumping and stirring technique was demonstrated for lab-on-a-chip applications. Microfluidics was accomplished via redox-MHD, which takes advantage of a body force (F_B) that is generated when there is a net movement of ions in solution (j) in the presence of a perpendicular magnetic field (B), according to the equation F_B = j×B. In this work the movement of ions in solution was generated using electrodes modified with the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) rather than a redox species in solution, which can interfere with analyte detection and with biological species. …

Cross-Linked Pdms Expansion Due To Submersion In Liquid And Supercritical Co2, Teng Yang

Graduate Theses and Dissertations

Characterization of micro/nano-copper particles impregnated Polydimethylsiloxane (PDMS) submersed in supercritical carbon dioxide (scCO2) was studied. The purpose of this investigation was to advance micro-corrosion sensor technology utilizing PDMS and micro-metal particle composite as the sensing element currently under-development. One of the key challenges encountered was the removal of the native oxides inherently existing on the metal particles. Numerous techniques were experimented with to counter this problem at the UA Engineered Micro/Nano Systems Laboratory (EMNSL), with swell-based protocols being identified as the most promising solution. In terms of compatibility to Micro-electro-mechanical Systems (MEMS) fabrication, CO2 is often used in the release …

Modification Of Surface Properties Of Polymeric Materials, Rajesh Sharma, Robert A. Sims, Malay K. Mazumder

Journal of the Arkansas Academy of Science

Polymeric materials are successfully used in virtually all industries ranging from semiconductors, and coatings, to household appliances, automotive, and biomedical implants. Polymers generally have excellent bulk physical and chemical properties. However, certain properties of polymers such as low surface energy, low wettability, and high electrical resistivity sometimes limit their applications. Changing the bulk formulation of the polymers can alter some of these properties, but in general this is not acceptable as it can affect "desirable" bulk properties. Surface modification techniques have been used to alter polymer surfaces without affecting the bulk properties of the material. Most polymers have very high …

Alumina And Synthesis Intermediates Derived From Diethylkaluminum Amide, Benzaldehyde And Water, Stephen E. Hall, Lize Wilcox, William S. Tyree, David A. Lindquist, Malay K. Mazumder

Journal of the Arkansas Academy of Science

The reaction of diethylaluminum amide [Et2AINH2] with benzaldehyde in toluene produces a solution of ethylaluminoxane polymer [EtAlO] and hydrobenzamide [PhCH=NCH(Ph)N=CHPh]. Alumina then is precipitated by the addition of water. Transition aluminas that may be useful in heterogeneous catalyst applications are obtained after calcining. Details of the chemistry of solution intermediates according to 1H NMR and the properties of the alumina product according to surface area analyses and powder x-ray diffraction are described.

New Studies Of Polyfuran And Polymers Of 3-Substituted Furan Rings, Rose M. Mcconnell, Walter E. Godwin, Bradley Phillips

Journal of the Arkansas Academy of Science

No abstract provided.

Artificial Neural Networks Used To Predict Electrical Properties Of Polymers, Sanjay K. Mitra, Qing Luo, Jerry A. Darsey

Journal of the Arkansas Academy of Science

The ability to predict properties of molecules prior to their synthesis can be of great importance in optimizing their design. Substantial savings in time as well as cost can be achieved if some desired properties can be predicted prior to the synthesis of the molecule. The outer orbitals of a molecule are primarily responsible for many different properties of the molecules. These outer orbital parameters can be utilized by an intelligent computing system like an Artificial Neural Network to extract necessary knowledge about the properties of the molecule. An Artificial Neural Network was trained to extract electrical parameters of several …

Study Of Deposition Methods For Silicon Powder, Kamesh V. Gadepally, Kevin B. Tennal, Roger M. Hawk, Al Robles, James A. Gribel

Journal of the Arkansas Academy of Science

Silicon powder tends to agglomerate at normal atmospheric conditions and is, hence, difficult to aerosolize. Several methods of aerosolizing silicon powder and finally depositing it on various substrates were investigated. This paper presents the investigated methods of aerosolization. The electrostatic spray coating used in dry paint application was found to be the most suitable. The general merits of this method and its use for silicon powder deposition to form films are discussed.