Chemistry Commons^™

Improving Chromatographic Analysis Of Phenolic Compounds, Tarika Lomcharoenwong

Chulalongkorn University Theses and Dissertations (Chula ETD)

Phenolic compounds are important chemicals and are applied in many fields. Moreover, they are found as contaminants in the environment. This research aimed to improve the chromatographic analysis of phenolic compounds and was divided into two parts. The first part focused on improving the separation of a mixture containing eighteen phenols using gas chromatography with derivatized cyclodextrin stationary phases. Results showed that all three cyclodextrin-based stationary phases, with different ring sizes, improved the separation of the mixture in comparison to polysiloxane OV-1701 stationary phase. The best separation was obtained from the small-size alpha-cyclodextrin with a capillary column of 15-meter long …

Preparation Of Cellulose Micro- And Nano Fibers From Bagasse Through Deep Eutectic Solvent System, Worapoj Phuckpetch

Chulalongkorn University Theses and Dissertations (Chula ETD)

This study aimed to prepare the cellulose micro- and nanofibers (CMNFs) using green chemistry viewpoint. The CMNFs were fabricated from sugarcane bagasse (SCB) pulp through treatment with zinc chloride (ZnCl2) - lactic acid (LA) in deep eutectic solvent (ZnCl2-LA DES) followed by short time ultrasonication of the DES-treated fibers in water. Under the optimum condition, the SCB pulp at high solid loading of 6.25% was treated with ZnCl2-LA DES. Lactate functionalized CMNFs with 230-270 nm length and 15-16 nm width were resulted in more than 90% yield and up to 62.2% crystallinity. The results showed that ZnCl2-LA DES was a …

Deuteration Of Organic Compounds By Hydrothermal Process, Nattasiri Phaisarn

Chulalongkorn University Theses and Dissertations (Chula ETD)

Deuterium-labeled compounds are in great demand in many applications, especially as reference standards for various analytical techniques. The objective of this study is to develop two complementary methods for deuterium labeling of organic compounds including the hydrogen-deuterium exchange (HDx) and halogen-deuterium exchange (XDx) reactions under hydrothermal conditions. For HDx, several aliphatic, alicyclic, aromatic, heterocyclic, and amino acid compounds were used as model substrates to determine the reactivity pattern and scope of the reaction. It was found that the HDx at the ortho- and para-Hs of phenolic compounds and a-position of amino acids as well as certain heteroaromatic compounds occurred efficiently …

การสังเคราะห์มอนอเมอร์ชนิดเอสเทอร์ฐานชีวภาพจากน้ำตาลแอลกอฮอล์และกรดไขมัน, มฆวัน ศรเกษตริน

Chulalongkorn University Theses and Dissertations (Chula ETD)

ในปัจจุบัน พอลิเมอร์ชนิดเอสเทอร์ฐานชีวภาพเช่นพอลิแลคติกแอซิด และพอลิบิวทิลีนซัคซิเนตได้รับความสนใจอย่างแพร่หลายเนื่องจากความสามารถในการย่อยสลายได้เองตามธรรมชาติ โดยทั่วไปมอนอเมอร์ของพอลิเอสเทอร์ที่สามารถย่อยสลายได้เองตามธรรมชาติจะถูกสังเคราะห์จากกระบวนการหมักวัตถุดิบจำพวกคาร์โบไฮเดรตเช่น น้ำตาล และแป้ง อย่างไรก็ตาม ยังมีวัตถุดิบจากธรรมชาติที่สามารถนำมาใช้ในการสังเคราะห์พอลิเอสเทอร์ได้ เช่น กรดไขมันจากน้ำมันพืช ในงานวิจัยนี้ ผู้วิจัยวางแผนสังเคราะห์มอนอเมอร์ชนิดเอสเทอร์ฐานชีวภาพจากน้ำตาลแอลกอฮอล์ 5 ชนิด ประกอบไปด้วย ดี-แมนนิทอล (D-mannitol), ดี-กาแลคติทอล (D-galactitol), ดี-กลูซิทอล (D-glucitol), ดี-ไซลิทอล (D-xylitol) และดี-แอโดนิทอล (D-adonitol) กับกรดไขมัน 2 ชนิด ประกอบไปด้วยกรดโอเลอิก (oleic acid) และ กรด 10-อันเดคซิโนอิก (10-undecenoic acid) ผ่านปฏิกิริยาเอสเทอริฟิเคชันด้วยตัวเร่งปฏิกิริยาเอกพันธุ์ชนิด camphorsulfonic acid (CSA) และตัวเร่งปฏิกิริยาวิวิธพันธุ์ชนิด phenolsulfonic acid-formaldehyde resin (PAFR) จากผลการศึกษาพบว่า สามารถสังเคราะห์มอนอเมอร์เอสเทอร์ฐานชีวภาพที่ต้องการ ผ่านการใช้ตัวเร่งทั้งสองชนิดได้ พบว่าการใช้ CSA เป็นตัวเร่งในปฏิกิริยาจะให้ประสิทธิภาพสูงกว่าการใช้ PAFR เล็กน้อย ได้ผลิตภัณฑ์ ดี-แมนนิทอล ไดเอสเทอร์ 69%, ดี-กาแลคติทอล ไดเอสเทอร์ 70%, ดี-กลูซิทอล ไดเอสเทอร์ 68%, ดี-ไซลิทอล ไดเอสเทอร์ 67% และ ดี-แอโดนิทอล ไดเอสเทอร์ 70% เทียบกับเมื่อใช้ PAFR เป็นตัวเร่งปฏิกิริยา ได้ผลิตภัณฑ์ ดี-แมนนิทอล ไดเอสเทอร์ 59%, ดี-กาแลคติทอล ไดเอสเทอร์ 55%, ดี-กลูซิทอล ไดเอสเทอร์ 56%, ดี-ไซลิทอล ไดเอสเทอร์ 53% และ ดี-แอโดนิทอล ไดเอสเทอร์ 57% มอนอเมอร์ที่สังเคราะห์จากการศึกษานี้จะนำไปสังเคราะห์พอลิเอสเทอร์ฐานชีวภาพชนิดใหม่ผ่านปฏิกิริยาอะไซคลิก ไดอีน เมตาทีซีสพอลิเมอร์ไรเซชันในอนาคต

Corn Oil-Based Highly Flame Retardant Rigid Polyurethane Foams For Industrial Application, Muhammad Rizwan Sulaiman

Electronic Theses & Dissertations

The synthesis of flame retardant polyurethane (PU) foam was carried out using two different flame retardants, such as triethyl phosphate (TEP) and triphenyl phosphate (TPP). The thermal and mechanical characteristics of the foam were analyzed. The obtained TGA results confirmed that the flame retardant acts in the gaseous form to stop the fire. All the prepared samples displayed excellent closed cell content, which was above 90 %. The burning time were reduced from 80 s to 7.5 s with the weight loss 3.2% of for sample E-12 (19.29 % TEP) and from 80 s to 11 s with the weight …

Fast & Efficient Simulation For Long Polymeric Chains, Naeyma N. Islam

LSU New Orleans Theses and Dissertations

No abstract provided.

Synthesis, Characterization, And Direct-Ink-Writing Of Syntactic Foams, Andrea Irigoyen

Open Access Theses & Dissertations

This project encompasses three different methods to fabricate syntactic foams using a PDMS matrix i.e., hollow spheres inclusion, pore generator leaching by solvent, and emulsion. The foam formation by using polysiloxane hollow spheres is done in a 3-step process. The first step is to create a core of polystyrene following a dispersion polymerization process. The goal for the size of the pore is to monodisperse and have an average diameter of 5-10 μm, so the polystyrene core must be as well within that range. After that, the cores are coated with a polysiloxane shell by following a polymerization by condensation …

Synthesis Of Polyethylene Glycol-Based Hydrogels And Silver/Gold Nanostructures For Biomedical Applications, Isabelle Ishimwe Niyonshuti

Graduate Theses and Dissertations

This work focuses on the synthesis of biocompatible polyethylene glycol (PEG)-based hydrogels, silver nanoparticles (AgNPs), and silver-gold nanocages (Ag-AuNCs) for biomedical applications. The dissertation includes two parts with Part I on the work of PEG-based hydrogel for wound healing applications and Part II on the work of Ag/Au nanostructures for antimicrobial applications. Part I studies PEG-based hydrogel for the delivery of fibroblast growth factors (FGFs) for wound healing applications, aiming to overcome the challenge of designing hydrogels capable of the sustained release of bioactive FGFs. This research develops new biocompatible anionic injectable hydrogel formulations based on Poly (Oligo Ethylene Glycol …

Synthesis And Characterization Of Pyridine-Based Diimide Ligands And Metal Phosphonate Coordination Polymers, Juan L. Pinedo

Honors Program Theses and Research Projects

Coordination polymers have been a topic of interest because of the large variety of applications these materials have. in particular Metal-Organic Frameworks (MOFs) have been researched due to their porosity and simple synthetic pathways. Structurally a MOF is composed of one or more organic ligands serving as the backbone of the structure. These ligands are complexed with metal ions coordinating into the desired structure. It is this structure that gives way to a variable porosity useful for proton conductivity and material transport. By varying backbone size a framework can be customized for use in specific conditions. This is due not …

Evaluating Halogen-Bond Strength As A Function Of Molecular Structure Using Nuclear Magnetic Resonance Spectroscopy And Computational Analysis, Quang Minh Dang, Jeffrey H. Simpson, Carol A. Parish, Michael C. Leopold

Chemistry Faculty Publications

Halogen bonding (XB) is a highly directional, non-covalent intermolecular interaction between a molecule (XB donor) presenting a halogen with an electron-deficient region or sigma hole (σ-hole) and an electron-rich or Lewis-base molecule (XB acceptor). A systematic, experimental, and theoretical study of solution-phase XB strength as a function of the molecular structure for both XB donor and acceptor molecules is presented. The impact of specific structural features is assessed using ¹⁹F and ¹H nuclear magnetic resonance (NMR) titrations to determine association constants, density functional theory calculations for interaction energies and bond lengths, as well as ¹⁹F–¹H …

Chitosan Graphene Composite Fabrication And Characterization For Treatment Of Harmful Algal Blooms And Toxins, Sarah Zetterholm

Master's Theses

Chitosan graphene composites were fabricated and characterized as a management strategy for harmful algal blooms (HABs) caused by various species of cyanobacteria. These chitosan graphene materials were compared to previously studied chitosan graphene-oxide composites in both material properties and HAB treatment. In previous studies, adsorption of the cyanobacteria onto the surface of the composite materials has been observed. Investigations of the pure materials for these composites are also included in this study to determine whether removal is a result of charge interactions with the composite, or as an inherent property of the graphene or graphene oxide. Initial results suggest that …

Controlling Degradation With Force And Light, Brad Davis

Dissertations

Stimuli-responsive polymers respond to changes in their environment by altering their physical and chemical properties. Their responsiveness allows them to be used as sensors, mechanical actuators, delivery systems, and can yield either elongated lifetimes through healing mechanisms or shortened lifetimes through triggered degradation. Still a growing field in polymer science, researchers seek to expand the capabilities of these materials by improving their specificity, range, and mechanisms of both the stimuli and the response. The work presented explores stimuli-responsive materials, focusing on mechanical and light stimuli, and how to gain control of the response by specific changes in the polymeric material. …

Emergence Of Non-Hexagonal Crystal Packing Of Deswollen And Deformed Ultra-Soft Microgels Under Osmotic Pressure Control, Molla R. Islam, Rachel Nguyen, L. Andrew Lyon

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

Highly solvent swollen poly(N-isopropylacrylamide-co-acrylic acid) microgels are synthesized without exogenous crosslinker, making them extremely soft and deformable. These ultralow crosslinked microgels (ULC) are incubated under controlled osmotic pressure to provide a slow (and presumably thermodynamically controlled) approach to higher packing densities. It is found that ULC microgels show stable colloidal packing over a very wide range of osmotic pressures and thus packing densities. Surprising observation of co-existence between hexagonal and square lattices is also made over the lower range of studied osmotic pressures, with microgels apparently changing shape from spheres to cubes in defects or grain boundaries. It is proposed …

Enhanced Platinum (Ii) Drug Delivery For Anti-Cancer Therapy, Marek T. Wlodarczyk

Dissertations, Theses, and Capstone Projects

Over the years, anti-cancer therapies have improved the overall survival rate of patients. Nevertheless, the traditional free drug therapies still suffer from side effects and systemic toxicity, resulting in low drug dosages in the clinic. This often leads to suboptimal drug concentrations reaching cancer cells, contributing to treatment failure and drug resistance. Among available anti-cancer therapies, metallodrugs are of great interest. Platinum (II)-based agents are highly potent and are used to treat many cancers, including ovarian cancer (OC). Cisplatin (cis-diaminedichloroplatinum (II)) is the first Food and Drug Administration (FDA)-approved metallodrug for treatment of solid tumors, and its mechanism …

Tools And Strategies For The Patterning Of Bioactive Molecules And Macromolecules, Daniel J. Valles

Dissertations, Theses, and Capstone Projects

Hypersurface Photolithography (HP) is a printing method for fabricating structures and patterns composed of soft materials bound to solid surfaces and with ~1 micrometer resolution in the x, y, and z dimensions. This platform leverages benign, low intensity light to perform photochemical surface reactions with spatial and temporal control of irradiation, and, as a result, is particularly useful for patterning delicate organic and biological material. In particular, surface- initiated controlled radical polymerizations can be leveraged to create arbitrary polymer and block- copolymer brush patterns. Chapter 1 will review the advances in instrumentation architectures from our group that have made these …

Immobilized-Enzyme Reactors Integrated Into Analytical Platforms: Recent Advances And Challenges, Bert Wouters Dr, Sinead Currivan, Noor Abdulhussain, T. Hankemeier, Peter J. Schoenmakers

Articles

Immobilized-enzyme reactors (IMERs) are flow-through devices containing enzymes that are physically confined or localized with retention of their catalytic activities. IMERs can be used repeatedly and continuously and have been applied for (bio)polymer degradation, proteomics, biomarker discovery, inhibitor screening, and detection. Online integration of IMERs with analytical instrumentation, such as high-performance liquid chromatography (HPLC) systems, reduces the time needed for multi-step workflows, reduces the need for sample handling, and enables automation. However, online integration can also be challenging, as reaching its full potential requires complex instrumental setups and experienced users. This review aims to provide an assessment of recent advances …

Doping Of Conjugated Polymers: Preparation, Characterization And Device Fabrication, Kan Tang

Dissertations

Semiconducting conjugated polymers (CPs) as emerging materials for advanced electronic applications such as sensors, OPVs, and OEFTs has become an intriguing research topic in the past decades. It opens a new avenue of “flexible” electronics, which has shown great potential in next-generation electronic devices.

However, due to the nature of CP materials and related solution processing techniques, unlike almost perfectly crystalline silicon materials, CPs in the solid-state often exhibit much lower crystallinity if it is not complete amorphous, which severely hinder the electronic property and optical property of the materials. The crystallinity of CPs in a film is often uniquely …

Photopolymer Networks With Tunable Command Destruct Properties, William Walker

Dissertations

Photoinduced thiol-catalyzed hydrogen abstraction and beta-scission of acyclic benzylidene acetals is demonstrated as a new route to “command-destruct” polymer thermosets. Using this approach, we show that poly(thioether acetal) networks synthesized via thiol-ene photopolymerization rapidly degrade to alkyl benzoate byproducts when triggered with light, transitioning from solid to liquid within seconds. The light-driven construction and destruction processes, accessible via distinct differences in kinetics, are readily amendable for photopatterning, additive/subtractive manufacturing, and wavelength-selective applications.

The first chapter of this dissertation details the development of command-destruct poly(thioether acetal) networks via a previously unexplored mechanism for polymer degradation. The degradation mechanism is confirmed via …

Stimuli Responsive Dye-Containing Peg-Pla Block Copolymer Micelles And Computationally Assisted Design Of A Stapled Peptide Bundle, Tyler L. Odom

Graduate Theses/Dissertations

In this thesis, I report the preparation and characterization of dye-containing PEG-b-PLA block copolymer micelles and the computational design of a novel coiled-coil peptide bundle. The PEG-b-PLA micelles encapsulate hydrophobic molecules into their core and have strong potential as nanocontainers or delivery vesicles. In theory, these internalized molecules can be released upon exposure to mechanical forces that disrupt the micellar structures. This force-responsive nature is one of the inherent properties of micellar systems. However, there is a stark lack of research that utilize this property in applications. Along those lines, I have studied the behavior of …

Synthesis Of The Diazonium Zwitterionic Polymer/Monomer For Use As The Electrolyte In Polymer Electrolyte Membrane (Pem) Fuel Cells, Josiah Marshall

Electronic Theses and Dissertations

My research goals are to synthesize new zwitterionic perfluorosulfonimide (PFSI) monomer/polymers. They are expected to replace traditionally used perfluorosulfonic acid (PFSA) polymers as the electrolyte in PEM fuel cells. For the PFSI monomer preparation, we designed a nine-step synthesis route. Thus far, I have successfully completed the synthesis of 4- (2-bromotetrafluoroethoxy)-benzenesulfonyl amide, 4-acetoxybenzenesulfonic acid sodium salt, and 4-chlorosulfonyl phenyl acetate. The coupling reaction of 4-(2-bromotetrafluoroethoxy)- benzenesulfonyl amide with 4-chlorosulfonyl phenyl acetate, was troublesome due to slow reaction kinetics and byproducts. Additionally, I did a methodology study for the homopolymerziation of the perfluoro 3(oxapent-4-ene) sulfonyl fluoride monomer. We compared the weight …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Preparation And Characterization Of Single Layer Conducting Polymer Electrochromic And Touchchromic Devices, Sharan Kumar Indrakar

USF Tampa Graduate Theses and Dissertations

Electrochromic devices (ECDs) have triggered great interest because of their potential applicability in energy-efficient buildings and low power display systems, including reflective type smart windows/mirrors and wearable-flexible devices. In the past decades, electrochromic technologies with different device structures and materials have been proposed. The idea of employing a simple device structure with a durable, cost effective electrolyte is crucial to designing and manufacturing high-performance ECDs. With this idea in mind, this thesis describes the various efforts to develop a simple ECD comprising of a composite single active layer gel electrolyte, sandwiched between two transparent conducting electrodes, lasting over 10,000 cycles …

Design Of Antioxidant Monomer, Augustine Osilamah Yusuf

Masters Theses & Specialist Projects

Reactive oxygen species such as hydrogen peroxide are present at the sites of inflammation in the body. Degradable polymeric nanoparticles have shown great promise in a range of biomedical applications which include preferential delivery of therapeutics to such inflamed sites. We are working towards a new class of materials expected to have tunable degradation rates in the presence of hydrogen peroxide. These new materials consist of three parts: degradable linkages, antioxidant groups, and unreactive filler monomers such as methylmethacrylate. We have synthesized a polymerization initiator with a degradable linkage, and we have shown that using this initiator to synthesize another …

Harnessing Surface Chemistry And Instabilities In Silicone Elastomers To Synthesize Adaptive Systems With Mechanically Tunable Surface Properties And Functionality, Ali Jamal Mazaltarim

Department of Chemistry: Dissertations, Theses, and Student Research

Material interfaces are of critical importance to numerous fields, including nanomaterials, electronics, microfluidics, synthesis, bioanalysis, pharmaceuticals, and catalysis, and they have been extensively researched. The materials used in these fields are often rigid/hard (such as silicon wafers) resulting in static surface properties. Consequently, the chemical/morphological properties of a surface may be modified using synthetic or mechanical means to tailor the interfacial properties of a material (i.e., surface energy, adhesion, topography, and reactivity). Recently, emphasis has been placed on designing dynamic materials with adaptive interfacial properties that respond to a variety of environmental stimuli. To this end, the surface chemistry and …

The Effect Of Reaction Conditions On The Nucleation And Particle Growth Of A Colloidal Covalent Organic Framework, Brendan Posson

Master's Theses

Covalent organic frameworks (COFs) are a novel class of crystalline materials with regular porosity, high specific surface area, and various linkage chemistries. Conventional chemical syntheses of these materials lead to the formation of bulk powders characterized as polycrystalline aggregates. Synthesizing these materials as colloidal systems is an effective means to prevent aggregation and achieve larger single-crystalline domain sizes. In this thesis, I describe the effect of temperature and transimination catalyst strength on COF particle nucleation and particle growth. Morphology and crystallinity of the COF-300 particles were confirmed using X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The onset of colloidal …

Pressure Driven Desalination Membranes: Lyotropic Liquid Crystals Containing Single Walled Carbon, Matteo A. Del Giudice, Samantha Castillo Merigold

Materials Engineering

This project presents a potential alternative desalination technique that utilizes the ion rejection properties of single walled carbon nanotubes dispersed in a lyotropic liquid crystal (LLC) matrix. Previous research has pointed to the polymerizable surfactant methacryloxy ethyl hexadecyl dimethyl ammonium bromide (C16MA) having capabilities of filtering molecular components smaller than a nanometer, when oriented in cylindrical micelles. SWCNTs were dispersed in deionized water by probe sonication and addition of surfactant cetyltrimethylammonium bromide (CTAB) due to SWCNTs’ hydrophobic properties. Membranes were produced containing 55wt% C16MA, 37wt% DI water, 0.1wt% with respect to the monomer (WRM) SWCNTs, 1.9 wt% WRM 2,2-dimethoxy-2-phenylacetophenone (photointiator), …

The Emerging Applications Of Sulfur (Vi) Fluorides In Catalysis, Nicholas Ball, Cayo Lee, Jonathan E. Elisabeth, Nathan C. Friede, Glenn M. Sammis

Pomona Faculty Publications and Research

The past decade has witnessed remarkable growth of catalytic transformations in organic sulfur(VI) fluoride chemistry. This Perspective concentrates exclusively on foundational examples that utilize catalytic strategies to synthesize and react S(VI) fluorides. Key mechanistic studies that aim to provide insight toward future catalytic systems are emphasized.

Elucidation Of Optoelectronic Properties Of Pyrrolo[3,2-B]Pyrrole Chromophores, Ryan Faddis

Symposium of Student Scholars

Ryan Faddis Abstract

Elucidation of Optoelectric Properties of Pyrrolo[3,2-b]pyrrole Chromophores

Ryan Faddis and Graham S. Collier

Department of Chemistry and Biochemistry

Kennesaw State University

Derivatives of phenyl substituted pyrrolo[3,2-b]pyrroles have shown promise of being useful organic opto-electric compounds due to their advantageous tunability through careful synthetic design. Furthermore, one pot synthesis and readily accessible commercial reactants such as, aromatic amines and aldehydes, makes these molecules more favorable than other, more complex syntheses traditionally required for optically active organic molecules. Although relatively simple synthesize, more information from experimentation is needed to understand the optical properties of these species, and thus, a …

Lipoates As Building Blocks Of Macromolecules, Mojdeh Raeisi

Chemistry Theses and Dissertations

Since the discovery of Lipoic acid in the early 1950s, there have been several studies to further investigate properties and applications of this interesting, naturally occurring compound. In 1956, the dynamic nature of disulfide bonds in Lipoic acid was reported, which can exist through conversions of monomeric disulfide, polymeric disulfide, and reduced form (dithiol) from one to another under proper conditions. This dynamic nature and reducibility of disulfide bonds via thiol-disulfide exchange, opened doors to the use of Lipoic acid in drug delivery systems, especially for delivery to cancer cells that suffer from overexpression of glutathione – a thiol-bearing tripeptide …

Aerosol Vapor Synthesis Of Organic Processable Pedot Particles And Measuring Electric Conductivity Using A 3d Printed Probe Station, Yang Lu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Conducting polymers are organic semiconductors characterized by conjugated backbones (alternating single-double bonds) that enable mixed ionic-electronic conductivity. Their polymeric nature, tunable band structure and reversible redox capability have demonstrated fundamental advances in the fields ranging from electrochemical energy storage, sensing, to electro/photo catalysis and neuromorphic engineering. Conjugated backbones, the origin of all the unique physical and chemical properties associated with conducting polymers, prevent their solubility due to high lattice energy which hinders processing. Current solution utilizes a long-chain polymer (PSS) as dopants to render conducting polymer water dispersible (PEDOT:PSS). Nonetheless, PSS is highly acidic and hydrophilic limiting applicability with acid-incompatible …