Wood Science and Pulp, Paper Technology Commons^™

A Comparison Of Presettlement Vegetation And Fire Regimes With Current Patterns In Oak Woodlands And Shrublands Of Sw Oregon, Patricia S. Muir Dr., Paul Hosten Dr.

Joint Fire Science Program Research Project Reports

Fuel reduction efforts on BLM lands in southwestern Oregon are motivated by the need to reduce fire hazard and restore and rehabilitate ecosystems. Successful ecosystem restoration depends, in part, on understanding the target: what ecosystem model is considered natural and healthy for a given area? Oak (Quercus garryana) woodlands and shrublands are two of the most characteristic ecosystems in interior valleys of southwest Oregon, and extensive acreages within these systems are treated annually for fuel reduction. However, these are also two of the least understood ecosystems in the region. We know little about their presettlement attributes, responses to disturbance, or …

An Internet Based Portal For Fire Science And Management In The Southern Region

Joint Fire Science Program Research Project Reports

Task 1 – Organize a technical advisory team and host an initial workshop to explore methods for integrating FRAMES, TTRS, and ESFS websites.

Task 2 – Identify and acquire data, tools, and publications from funded JFSP and NFP projects working with the JFSP and NFP project databases and principal investigators. Also, when possible identify and acquire data and tools used and created by others in the wildland fire community including state agencies, educational institutions, and non-governmental organizations.

Task 3 – Develop and post online FGDC metadata records for all datasets from funded JFSP and NFP projects as well as key …

Wood Measurement Rules, Maine Department Of Agriculture, Food & Rural Resources

Maine Collection

Wood Measurement Rules

Maine Department of Agriculture, Food & Rural Resources, Division of Quality Assurance & Regulations, Augusta, Maine, 2006.

Contents: Chapter 380: General Provisions / Chapter 381: General Requirements for Wood Transactions / Chapter 382: Measurement of Wood and Declaration of Quantity / Chapter 383: Measurement and Prompt Furnishing of Measurement Tally Sheets / Chapter 384: Complaints and Investigations / Chapter 385: Licensing of Wood Scalers / Appendix

Paper Substrates For Electronic Printing, Laura K. Wood

Masters Theses

Printed Radio Frequency Identification (RFID) labels utilize conductive inks to provide the means for wireless flow of electronic signals. An RFID label is an identification label with an integrated circuit and antenna that transmits data via radio waves to a reader, which sends the data to a computer for processing. RFID labels allow manufacturers and retailers to accurately track their inventory more efficiently than previously possible with bar codes. However, etched metal RFID labels are too expensive for widespread implementation. The key to reducing the cost of RFID technology is replacing etched metal tags with tags printed with conducting ink. …

Significant Accomplishments And Milestones: 2002-2005, Arthur Temple College Of Forestry And Agriculture

eBooks

No abstract provided.

Use Of Borate In Semi-Chemical Pulping, Promodh K. Veguru

Masters Theses

The original Neutral Sulfite Semi-Chemical (NSSC) pulping process used sodium sulfite as the principle cooking chemical and had the disadvantage of sulfur emission problems. Considerable research was conducted to investigate the use of other chemicals including sodium hydroxide, but was not completely satisfactory. Several mills adapted a sodium carbonate based process but experienced slower pulping and reduced physical properties. The objective of this research is to study the use of borate as a pulping chemical in sodium carbonate semi-chemical pulping. The experimental plan included digester cooks; controls with pure sodium carbonate, and the other with partially borate autocausticized sodium carbonate. …

Computer Integrated Print Production And Jdf, Deepak-Kumar Mohan-Kumar

Masters Theses

In the graphic arts industry, the need for the unification of mechanized and automated systems has seen a great increase in the last few years. This very need has led to various specification formats like, Adobe's PJTF and CIP3's PPF and the latest one of them all, CIP4's JDF. Earlier specification formats that had inherent limitations with proprietary architecture have paved the way to JDF. JDF is an open, extensible, XML based job ticket format that has been a proposed standard to achieve end-to-end job ticket specifications along with message interchange protocol and message description standard.

This thesis research has …

3d Simulation Of Layer Mixing In A Three-Layer Stratified Headbox, Jatetana Kunsriluksakul

Masters Theses

In this research, the commercially available software called FLUENT is used to simulate and visualize behaviors of flow in a three-layer stratified headbox of a paper machine. A two-phase model, "volume of fluid", is employed to simulate turbulences in a free jet. The information obtained from the simulations, in terms of velocity profiles, Reynolds stress, turbulent kinetic energy, and macro scale of turbulence, are used to assess and characterize the effect of free jet length, vane length, vane thickness, nozzle angle, and slice opening on fiber layer mixing. Importantly, the simulation results demonstrated that the macro scale of turbulence in …

The Effects Of Various Types And Percentages Of Fillers With The Mechanical Properties Of Latex Saturated Paper, Jeffrey Alan Kuehn

Masters Theses

This study examined how the percentage of mineral fillers and their various types, when added to the base paper, affects the mechanical characteristics of latex impregnated paper.

A series of model handsheets were produced and subjected to physical property tests. The basis weight of these handsheets was held constant, as various types and percentages of filler were added. This base paper was then impregnated with a known acrylic emulsion. All variables with the impregnation process were held constant during the impregnation process. Physical properties were tested on the handsheets before and after impregnation. All physical tests on the handsheet samples …

Wildland Fire In Ecosystems Effects Of Fire On Soil And Water, Jan L. Beyers, James K. Brown, Matt D. Busse, Leonard F. Debano, William J. Elliot, Peter F. Folliott, Gerarld R. Jacoby, Jennifer D. Knoepp, Johanna D. Landsberg, Daniel G. Neary, James R. Reardon, John N. Rime, Peter R. Roichaud, Kevin C. Ryan, Arthur R. Tiedemann, Malcolm J. Zwolinski

Joint Fire Science Program Synthesis Reports

This state-of-knowledge review about the effects of fire on soils and water can assist land and fire managers with information on the physical, chemical, and biological effects of fire needed to successfully conduct ecosystem management, and effectively inform others about the role and impacts of wildland fire. Chapter topics include the soil resource, soil physical properties and fire, soil chemistry effects, soil biology responses, the hydrologic cycle and water resources, water quality, aquatic biology, fire effects on wetland and riparian systems, fire effects models, and watershed rehabilitation.

Characterizing Moisture Regimes For Assessing Fuel Availability In North Carolina Vegetation Communities, Roberta A. Bartlette, James Reardon, Gary M. Curcio

Joint Fire Science Program Research Project Reports

In the southeastern United States prescription burning, fire danger rating and wildfire suppression strategies are constrained by limited knowledge of the influence of moisture content in live vegetation, organic soils, water table and weather. The interactive influence of these factors on fire behavior is not well studied. The 3+ year long study reported here was conducted to gain direct empirical understanding of seasonal fuel and soil moisture dynamics in shrub-dominated pocosin communities, in coastal Virginia and North Carolina, mixed hardwoods communities containing significant laurel and rhododendron understory fuels in western North Carolina and eastern Tennessee, and longleaf pine communities in …

Fuel Reduction And Restoration Of Pine/Hardwood Ecosystems Severely Impacted By The Recent Southern Pine Beetle (Dendroctonus Frontalis) Epidemic In The Southern Appalachians, James M. Vose, Katherine J. Elliott

Joint Fire Science Program Research Project Reports

As a result of this most recent SPB epidemic (1999-2003), thousands of hectares of dead pine trees have created wildfire-hazard conditions in the southern Appalachians. One of the challenges for land managers is how to return fire to these ecosystems after (1) nearly a decade of exclusion, and (2) the more recent SPB mortality enhanced fuel loads. Higher fuel loads have the potential to increase fire intensity and severity. At the extremes, fires of high intensity and severity can have a large effect on ecosystem structure and function. The objectives of our research were: (1) to quantify fuel load reduction …

Determining Differences In Quality Between The Gravure And Flexographic Process On Films, Pete Welther

Paper Engineering Senior Theses

Quality is the goal of every printing company. Every day printing companies spend money trying to find ways to improve the quality of their product. Type of paper, ink, and even the types of printing processes are all characteristics looked at when determining the quality of a printed product.

In today's printing industry, there are two printing processes that have arguably jumped to the front in terms of the highest quality printing ability. The flexographic process and the gravure process have both risen to meet the standards of high quality. The gravure process has always been at the top. For …

Strengthening Of Corrugated Boards By Chemical Impregnation, Rajesh Premnarayansingh

Masters Theses

Linerboards are used for making corrugated boards. The paperboards can be strengthened by adding strength additives at the wet-end of the paper machine and also by sizing them. Impregnation is another effective approach of strengthening the paperboards, mostly offline. The aim of the thesis is to evaluate the performance of the modified Dixon coater and check the operating conditions with various chemicals used for impregnating 42 lb/1000 sq.ft grammage linerboard.

The major conclusions of the research were that the edge compression strength increases markedly validating the usage of impregnation for linerboards. Also, the stiffness of linerboard increases and the voids …

Fire In Southern Appalachians: Fuels, Stand Structure And Oaks, David L. Loftis, Mary A. Arthur, Rex Mann, Jeffrey Lewis

Joint Fire Science Program Research Project Reports

Managers responsible for maintaining the diversity and productivity of Southern Appalachian forests are increasingly turning to prescribed fire as an important management tool in oak dominated forests. The decision to use fire with increasing frequency and spatial extent is based, in part, on an emerging sense of the prehistoric significance of fire in this landscape and its potential to control the proliferation of fire-sensitive competitors in contemporary forests. While it is well documented that fire has been an important ecological force in Southern Appalachian forests for a very long time, there has been little research to demonstrate that prescribed fire …

Stand-Level Green Biomass Equations For Sawtimber-Sized Loblolly Pine In Arkansas, Paul F. Doruska, David W. Patterson, Travis E. Posey

Journal of the Arkansas Academy of Science

Loblolly pine (Pinus taeda L.) is commercially the most important timber species in southern Arkansas and the southern United States. Results of stand-level timber inventories have traditionally been reported in terms of volume, yet loblolly pine sawtimber is bought and sold based on biomass. A straight forward stand-level conversion from volume per hectare to biomass per hectare does not exist for Arkansas, thus complicating the valuation of standing loblolly pine sawtimber. Two equations were developed to predict stand-level, outside-bark, green biomass per unit area for loblolly pine stands in southern Arkansas. The merchantable sawlog equation presented herein explained approximately 95% …

Generating Icc Output Profiles For Different Printing Devices: Application To A Shinohara Offset Press, Tektronix And Hp Designjet, Srinivasa Raju Alluri

Masters Theses

The most important issue in the current printing industry is managing the perfect color reproduction. Hence, the importance of color management in the printing industry is increasing day by day. Color management saves time and money for color users. With the help of color management, benefits such as accurate onscreen color, output device simulation, gamut checking, and color consistency between devices will reduce the amount of time and materials required to complete color production tasks.

The main purpose of this thesis is to develop ICC profiles and to compare the print quality of ICC profiles generated for different printing devices, …

Study Of Trisodium Borate Formation And Its Reaction With Green Liquor In Partial Autocausticizing, Pasupathy Rajan Subbaiyan

Masters Theses

This thesis investigates a new development of autocausticizing the green liquor with trisodium borate. Sodium metaborate (NaBO₂) reacts with the sodium carbonate (Na₂CO₃) in the char bed at 850°C in the recovery furnace to form trisodium borate (Na₃BO₃) which in tum, when dissolved in water produces sodium hydroxide (NaOH) regenerating sodium metaborate (NaBO₂). The main objective of this research is to study the formation of trisodium borate from the reaction of sodium metaborate with sodium carbonate at different molar ratios of carbonate to borate and to determine the …

Generating Icc Output Profiles For Different Substrates: Application To A Shinohara Offset Press & Several Printers, Kailashnath Jaganathrao Pohnerkar

Masters Theses

The International Color Consortium (ICC) was formed to undertake problems in achieving reliable and reproducible color throughout the reproduction process; the ICC Profile Specification offers solutions to color matching and quality. Problems with the ICC Profile relate to tools in the field, output devices, various substrates, profile calculation processes and color accuracy.

A color management system (CMS), developed by International Color Consortium, allows color transformation to be carried out by the operating system in conformity. ICC profiles describe the color range of a device and the way it distorts the color of an image. The profiling software is required to …

Effect Of Partial Borate Autocausticizing On Causticizing Rate And Equilibrium, Murugavel Anbalagan

Masters Theses

Borate autocausticizing can replace - total autocausticizing, or supplement the kraft lime cycle- partial autocausticizing. Partial autocausticizing is undergoing trials in several mills and has been recently commercialized in one mill. One common observation in the on-going trials is that the causticizing efficiency increases. The primary objectives of this research are to study the effect of metaborate on the causticizing rate, equilibrium and rate controlling parameters such as the temperature, concentration and sulfidity. The aim is to define the conditions that resulted in the increase of the causticizing efficiency.

The major findings of the research are that when the causticizing …

Borates As Infrared Drying Agents And Bulking Agents In Paper Coatings, Balarama K. Morla

Masters Theses

In the paper industry, the drying process is the second most energy consuming process after the pulping process; it accounts for around 35% of the total energy consumption. If energy consumption in the drying process can be reduced, the cost of paper production would be decreased considerably. The more recent and wide acceptance of the use of infrared energy for the drying of coated grades has led to many developments and improvements in materials and controls, making IR a practical and safe method for the paper industry. This process is mainly based on the absorption of infrared radiation by paper …

Determine The Effect Of Pulp And Paper Properties Such As Basis Weight, Degree Of Refining On The Drying Proportions Of Both Hardwood And Softwood, Vidit Kumar

Masters Theses

Paper drying is a very important unit operation and a highly energy intensive operation in the paper industry. Various studies have been made to discuss the effect of various variables on the drying behavior of the paper. Extensive efforts have been made to reduce the energy requirement in this operation.

This study tries to find the effect of basis weight, refining level on the drying behavior of the paper of both hardwood and softwood. The basis weight, the degree of refining and type of wood affects significantly the drying rate, the drying time and the contact coefficient between the paper …

The Relationship Between Single-Disk Refining Energy, Strength Properties, And Freeness For Softwood, Hardwood, And Recycled Stock, Ken Marker

Masters Theses

Statistical and graphical analysis techniques were applied to disc refining operations in order to understand the relationship between strength and drainage properties for a given stock. Two refining variables of refining energy and revolutionary velocity were varied during the experiment. The calculated variable of refining intensity was used to represent these refining variables. The relationship between the refining energy, strength, and drainage properties for northern softwood, northern hardwood, and printing grade recycled stock was explored. Experimental pulp was obtained on a Beloit Jones Single-Disc refiner, and a handsheet study was used to develop the relationship with strength properties. Several empirical …

Crt Versus Lcd Monitors For Soft Proofing: Quantitative And Visual Considerations, Veronika Chovancova

Masters Theses

Quantitative and visual considerations of accuracy of colors in images displayed on two types of monitors employing a soft proofing system were accomplished in this research work. Soft proofing proposes possible savings in material and time, which are essential issues of current digital and quick turn around workflow. The investigation focuses on the quantitative evaluation process of color monitor profiles along with the color quality of software used to achieve the created profiles. Specific tests are provided to look at the color quality of the monitors and output profiles in greater details. Also, a general comparison of the CRT and …

Particle Size Analysis Of Commercial Printing Inks And Their Press Stability And Printability, Andrea Frimova

Masters Theses

The particle size of commercially produced printing inks available for each of the printing processes, such as letterpress, lithography, flexography, rotogravure and screen-printing was completed. The study of their stability on the press, as well as the examination of the effect of particle size on printability and color balance was investigated. This was demonstrated on several gravure and flexo printing trials lasting for several hours.

Decrease of rotogravure inks particle size was most obvious in black, while the decrease of particle size in all other colors was rather similar. Differences in color, print density, and specular gloss measured on printed …

Influence Of Infrared Absorbing Anions On Paper Coating Structure, Sachitanand Karnakote

Masters Theses

Infrared units are widely used in paper coating drying to initiate evaporation and quickly reach solids immobilization point. Thermal efficiency of IR units can be improved by increasing absorption of coating color. Borate compounds have shown good IR absorption at wavelengths typical to commercial IR units.

The objective of this research was to evaluate the compatibility of selected borate-containing compounds with the primary components of the paper coatings like clays, carbonates, and some binders.

Coatings were prepared at 60% solids and viscosity and pH were adjusted to 900-1200 cp and 8.5-9.5 respectively. Dynamic stress and frequency sweeps were carried out …

Utah Forest Health Report : A Baseline Assessment 1999 - 2001, Colleen Keyes, Paul Rogers, Leon Lamadeleine, Vick Applegate, Dave Atkins

The Bark Beetles, Fuels, and Fire Bibliography

This report addresses forest health in two ways: by discussion of forest-related issues and by data summaries in several appendices. FHM is a long-term monitoring program and therefore, the data presented in this report must be viewed in that light. This report presents a first-time, or baseline summary. Subsequent reports will address changes over time as plots and other detection surveys are conducted and re-measured.

Fire Climate Interactions And Predicting Fire Season Severity In The Mediterranean Climate Areas Of California, Southern Oregon, And Western Nevada, Alan H. Taylor, Carl N. Skinner, Andrew M. Carleton, Scott L. Stephens, Valerie Trouet, Bernd Haupt, Andrew Pierce

Joint Fire Science Program Research Project Reports

• We identified annual area burned for 37 National Forests in Washington, Oregon, and California between 1929 and 2004 from annual fire reports. Variation in area burned each year on National Forest lands is strongly related (r2 = 0.87) to total area burned in California. This indicates area burned in National Forests is a good indicator of total area burned in a state. • Four large groups of National Forests were identified that had similar temporal patterns of fire extent. Three of these groups were spatially coherent and included mainly: 1) Washington and northern Oregon; 2) northern California and California …

Development Of Water-Based Ink System For Braille Printing, Saurabh Varma

Masters Theses

The most commonly used system of writing by and for blind persons is called Braille, named after its French inventor, Louis Braille (1809-1952). Braille is comprised of a rectangular six-dot cell on its end, with up to 63 possible combinations using one or more of the six dots. Braille is the only reliable method of literacy for blind persons, because it enables them to read and write by touch¹.

Currently, Braille is printed by special embossers that serve as a printing press. These embossers create Braille output when it is attached appropriately to computers. The speed of these …

Rheology Of Silica Based Inkjet Coatings And Their Filterability, Peeyush Tripathi

Masters Theses

Coating rheology has long been understood to be a key factor in the smooth operation and performance of a coater. As coaters run faster and formulations become more complex, the demands on a coating's rheology grow more stringent.

Silica based coating formulations present unique rheological challenges, thus providing the opportunity for coating formulators to improve their performance through rheological studies under various conditions of shear. Due to rheological restrictions (gelling), silica based coatings are generally applied at 25-26% solids which is very low as compared to calcium carbonate or clay based coating, at 68-70% solids. Consequently, any improvement in coatings …