Wood Science and Pulp, Paper Technology Commons^™

Investigating The Cost And Efficiency Of Two Chemical Pathways To Produce The Plant-Based Coagulants, Taylor Nixon

Honors Theses

Plant-based coagulants are promising sustainable alternatives for water treatment due to their biodegradability, low toxicity, and reduced risk of secondary pollution. Unlike conventional inorganic coagulants, they generate less sludge and avoid secondary contamination in the environment. This project examines two chemical modification strategies for producing cationic cellulose coagulants. The first involves direct amination of cellulose using CHPTAC, while the second employs periodate-oxidized dialdehyde cellulose, which enables reductive amination through reactive aldehyde groups. These approaches are expected to yield materials with differing charges, surface functionalities, and structural properties that may influence coagulation performance. The study evaluates the technical and economic feasibility …

Development Of A Grease Resistant Barrier For Food Industry Applications, Mira Marino

Honors Theses

The objective of this project is to develop a grease-resistant barrier coating for paper-based food packaging and to evaluate the economic feasibility of implementing this coating system at an industrial scale. As demand increases, this project focuses on identifying an optimal pigment and binder combination that enhances barrier performance while maintaining cost-effectiveness. The primary goal was to maximize grease and moisture resistance of coated paper while ensuring the process is economically viable and compatible with existing paper mill operations.

The final plant design consists of one continuous stirred tank reactor (CSTR) and three centrifugal pumps integrated into an existing paper …

Rheological, Interfacial, And Filtration Behavior Of Lignocellulosic Nanomaterials In Suspension And Emulsion Drilling Fluids, Meen Sung Koo

LSU Doctoral Dissertations

In recent years, the rheological aspects of suspensions/emulsions applied by cellulose nanomaterials (CNMs) have been gained considerable interests due to high gel-forming properties ascribed by hydrophilicity, crystallinity, ease functionalization, and high aspect ratio. Introducing residual lignin in CNMs (LCNMs) seemed to be capable of achieving various advantages in the application of CNMs ascribed by hydrophobicity, binding effects, and abundant aromatic groups derived from complexity of lignin. This dissertation dedicates to the characterizations of (L)CNMs, and rheological properties of (L)CNMs applied fluids (i.e., suspension and emulsion). In the suspension system, the presence of lignin in LCNMs decreased gel strength, viscosity, and …

The Synthesis, Characterization, And Application Of Polysaccharide-Based Additive To Improve Wet And Dry Strength And High-Barrier Properties Of Paper Products, Cornellius Marcello

Dissertations

Paper products play an essential role in our daily lives owing to their low cost, environment-friendly character, renewability, and recyclability. Paper manufacturers have been using petroleum-based strength additives (cPAM, GPAM, PAE) to meet the perceived needs of customers. On the other hand, paper produced from cellulose is hydrophilic and porous, leading to shallow water and grease resistance, causing paper manufacturers to use many kinds of coating materials such as poly-fluoroalkyl substances (PFAS) and synthetic plastic to improve water resistance, especially for food packaging paper products like cups, plates, food boxes, and packaging. However, PFAS are identified as likely carcinogenic to …

Development Of Preservative-Treated Cross-Laminated Timber And Lignin-Reinforced Polyurethane-Adhesive For Glued Laminated Timber, Samuel Oluwafemi Ayanleye

Theses and Dissertations

Interest in the use of mass timber in building and construction is growing worldwide, this is due to the structural integrity and reduced environmental footprint of timber-based structures. Concerns associated with the biological and environmental degradation of mass timber necessitate the development of adequate protection strategies to ensure the durability of these products. Preservative treatment is a proven technique that increases the durability and performance of wood in-service and can also be applied to large-sized timber panels such as cross-laminated timber (CLT). Therefore, this study focused on investigating the feasibility of treating prefabricated 3- and 5-layer CLT panels with Copper-azole …

Air Pre-Heat System Optimization For Flash Dryers, Sophia Louden

Honors Theses

Primient, a leading producer of food and industrial ingredients made from plant-based, renewable sources is the industrial sponsor for this project. The company is currently using Plate & Frame Heat exchangers to heat up a 40% by-weight glycol and water solution that is then used to preheat the incoming ambient air. Glycol is being added to reduce the risks of freezing in the system during the winter season. It is important to highlight that this fact affects the heat transfer properties of the liquid overall. Since air heating is a highly energy-demanding process, an outlet stream of hot water produced …

Evaluation Of Flood Damage On Cross Laminated Timber Wall Configurations, Mustafa Nezih Kaya

Theses and Dissertations

Greenhouse gas emissions are one of the critical factors that affect climate change, increasing flooding risk and threatening human life. The use of traditional construction materials is responsible for a higher percentage of global greenhouse gas emissions when compared to the use of sustainable materials in the construction industry. The substitution of current building materials with sustainable materials is essential to reduce greenhouse gas emissions and positively influence climate change when the current construction demand in the world is considered. Wood is one of the primary environmentally friendly construction materials in regard to high carbon storage and low carbon emissions. …

Enhancing The Performance Of Dowel Type Fasteners And A Case Study Of Timber Truss Failure, Lon A. Yeary

Theses and Dissertations

This document will outline the findings of three separate and independent studies: Study 1: In or around 1972, an experimental building was constructed. One of the intents of the construction project was to demonstrate advancements in wood building construction design. It was value-engineered throughout. That is, its materials and systems were intended to function at or near design capacity. In 2019, part of the roof of the structure collapsed. This case study investigates two potential factors that led to the failure: stress concentration in excess of the 12 allowable stress for 2 × 4 web members and insufficient plywood sheathing …

Recovering And Upgrading Kraft Lignin For Application In Flexible Polyurethane Foam, Peng Quan

Dissertations, Master's Theses and Master's Reports

Lignin is the second abundant natural polymer and has been highlighted as a potential substitute for fossil-based raw materials. However, the inherent molecular heterogeneity and the complex recovery processes result in the challenge of controlling the molecular properties and value-added applications of lignin in large scale. To address those issues, a novel acid-liquefaction process was developed in this study to recover Kraft lignin with improved molecular homogeneity directly from black liquor.

In the first study, the liquefaction parameters were screened based on yield and molecular weight properties of the recovered lignin. Then, the recovered lignin samples were used to replace …

Field Durability Test Of Clt Wall Envelope Using Physical Barriers Against Termites And Structural Performance Of Nailed Hold-Down Brackets Connected To Fungus-Exposed Clt Walls, Kamal Neupane

Theses and Dissertations

The effectiveness of using commercial polyethylene flashing and stainless-steel mesh in CLT wall systems as the termite barriers were evaluated in a short-term field test. American Wood Protection Association (AWPA) E21's visual ratings ranged from 10 to 9 in the specimens showing little damage when no physical barriers were used. Termites were able to crawl beyond the physical barriers in few specimens showing the necessity of further research on height and installation method of physical barriers. On the second part, the effect of decay caused due to Postia placenta, a brown-rot fungus, on the structural performance of hold-down brackets connected …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …

The Politics Of Biomass Energy In California: How External Benefits Are Used To Support An Economically Marginal Sector, Dana L. Dysthe

Cal Poly Humboldt theses and projects

Since the 1990s, there has been a decline in biomass energy generation in California. In order to promote state governmental policies aiming to increase biomass energy generation in California, the sector has been linked to a series of external benefits that biomass energy purportedly brings. Through document analysis, semi-structured interviews, and participant observation, five distinct external benefits were identified that have been used to promote the biomass energy sector. These external benefits are: renewable energy generation, air quality improvements, promotion of forest restoration and fuel removal projects, disposal of wood waste from agricultural and forestry sectors, and rural economic development. …

Cellulose Based Separator For High-Performance Lithium-Ion Batteries, Akshit Vaidya

Masters Theses

During the past two decades, lithium-ion batteries (LIBs) have gained great success in the field of portable devices, and currently, are penetrating to the market of vehicles. Compared to the fast development of LIBs, little efforts have been dedicated to the separator, which is one of the most important components of LIBs. Primarily, the lithium-ion battery separator has two functions, one is to prevent direct contact between the positive and negative electrodes, and the other is to provide a path for effective ionic transportation. Currently, the separator market of LIBs is dominated by polyolefin materials such as polypropylene, polyethylene, and …

Optimized Production And Evaluation Of Cellulose Nanocrystals Derived From Pre-Extracted Kraft Pulp Of Different Wood Species, Gurshagan Kandhola

Graduate Theses and Dissertations

Production of nanocellulose from a variety of naturally abundant, locally available and industrially significant wood species provides an opportunity for diversifying the portfolio of traditional pulp and paper industries. The U.S. has a prolific forest products industry with a well-established infrastructure that could be utilized for optimized and customized production of cellulose nanomaterials. However, to achieve that, it is important to a) understand how biorefining strategies for complete fractionation of biomass affect the downstream processing of pulp into nanocellulose, b) maximize the yields of cellulose nanocrystals and nanofibers (CNCs and CNFs) from pretreated raw materials, and c) evaluate if the …

Introduction To Sorghum Paper Production, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Sorghum is a tall grass used for many commercial products such as fodder and syrup. The 10 to 15 feet stalk of the plant has lower lignin than wood and provides a fiber length of 2.31 mm in the outer covering and 1.38 mm for the leaf. Sorghum fiber makes a high quality, strong paper suitable for printing, packaging and paperboard.

Lignocellulosic Biomass Derived Activated Carbon For Energy Storage And Adsorption, Changle Jiang

Graduate Theses, Dissertations, and Problem Reports (ETD)

Lignocellulosic biomass has been converted to hierarchical porous carbon materials which possess macro-, meso- and micro-pores. The natural structure of porous lignocellulosic structure was preserved during activation with further developed porosity by the activation. The activated carbon can be well applied to electrochemical double layer capacitor for transportation storage of ions as well as adsorbent materials for metal ion removal from wastewater.

The first chapter of this dissertation presents an introduction of biomass derived carbon and its applications. In the second chapter, both direct and indirect activation methods using carbon dioxide were adopted in this study. The results show that …

Soy- Based Flexographic Ink For Linerboard Printing, Rahul Ramchandra Pingale

Masters Theses

Many printing inks use volatile solvents in the formulation, which are hazardous to the environment from emission of VOC’s and at the same time, synthetic resins in these inks are not biodegradable. These problems with the fluctuating and rising price of petroleum are main reasons to look for new resources for making more environmentally friendly printing inks. The majority of the commercially available water based inks are formulated based on using acrylic resins, synthetic colorants, solvents/water and additives, which are the common main components for formulating printing inks. In this research, soy proteins were tested for their suitability to partially …

Printed Dot Quality In Response To Doctor Blade Angle In Gravure Printing, Bilge N. Altay, Alexandra Pekarovicova, Paul D. Fleming

The Hilltop Review

Doctor blade is one of the critical machine part of the gravure printing press that controls the amount of ink transfer on the substrate. The angle of the blade can be varied; however, an improper angle may cause major problems. In this study, the doctor blade angle was positioned at three different level to address its effect on the printed dot quality. Print trials were made on a web-fed gravure press at the speed of 650 ft./min. A high-resolution overhead camera was used to analyze the key dot attributes. The results showed that measuring only the density of printed dot …

Papermaking Factors Affecting Lateral Web Position During Commercial Heat Set Web Offset Printing, George W. Shields

Masters Theses

The interaction of water with paper plays a role in web handling characteristics during commercial heat set web offset printing. Water absorption leads to lower web tension for a given strain.

This research investigates paper properties and their role in preventing lateral web movement from cross machine air flows in the drying section during normal printing operations. Tensile properties of sheets are measured at various moisture contents and then used to determine the equilibrium stress-strain relationship for papers at moisture contents typical of heat set web offset printing. Permeability, fiber orientation and tensile stiffness are evaluated against lateral web movement …

Fate Of Conductive Ink Pigments During Recycling And Landfill Deposition Of Paper-Based Printed Electronics, James Edward Atkinson

Dissertations

Printed electronics (PE) are being developed as an alternative to traditional electronics, due to the more efficient use of materials and lower cost of production. The overall goal of this study was to understand how metallic pigments in conductive inks in PE are partitioned during landfill disposal and paper recycling conditions. The purpose is to assess the potential environmental impacts of PE landfilling in terms of metal leaching and to help develop new strategies for sequestering metallic ink components while paper-based PE are subjected to conventional paper recycling methods. The objective of this research is to study the fate of …

Oxidation Of Substituted Catechols At The Air-Water Interface: Production Of Carboxylic Acids, Quinones, And Polyphenols, Elizabeth A. Pillar, Marcelo I. Guzman

Chemistry Faculty Publications

Anthropogenic activities contribute benzene, toluene, and anisole to the environment, which in the atmosphere are converted into the respective phenols, cresols, and methoxyphenols by fast gas-phase reaction with hydroxyl radicals (HO(•)). Further processing of the latter species by HO(•) decreases their vapor pressure as a second hydroxyl group is incorporated to accelerate their oxidative aging at interfaces and in aqueous particles. This work shows how catechol, pyrogallol, 3-methylcatechol, 4-methylcatechol, and 3-methoxycatechol (all proxies for oxygenated aromatics derived from benzene, toluene, and anisole) react at the air-water interface with increasing O3(g) during τc ≈ 1 μs contact time and contrasts their …

Heterogeneous Oxidation Of Catechol, Elizabeth A. Pillar, Ruixin Zhou, Marcelo I. Guzman

Chemistry Faculty Publications

Natural and anthropogenic emissions of aromatic hydrocarbons from biomass burning, agro-industrial settings, and fossil fuel combustion contribute precursors to secondary aerosol formation (SOA). How these compounds are processed under humid tropospheric conditions is the focus of current attention to understand their environmental fate. This work shows how catechol thin films, a model for oxygenated aromatic hydrocarbons present in biomass burning and combustion aerosols, undergo heterogeneous oxidation at the air–solid interface under variable relative humidity (RH = 0–90%). The maximum reactive uptake coefficient of O₃(g) by catechol γ_O3 = (7.49 ± 0.35) × 10^–6 occurs for …

Investigating Wood Welding Parameters Using A Prototype Welding Machine, Timothy R. Melin

Master's Theses

Understanding how different processing variables influence wood welded bonds is vital if the technique will ever be used to create engineered lumber without using adhesives. A variation of vibration welding, wood welding uses pressure and friction to bond materials together. During welding, heat causes a softening in the wood, a naturally occurring composite material. This softening leads to fiber entanglement and a bond forms upon cooling.

The goal of this research was to investigate several processing aspects of the wood welding procedure. A prototype wood welding machine, designed and fabricated from the ground up, was used to investigate the effects …

Development Of Water-Based Ink System For Braille Printing, Saurabh Varma

Masters Theses

The most commonly used system of writing by and for blind persons is called Braille, named after its French inventor, Louis Braille (1809-1952). Braille is comprised of a rectangular six-dot cell on its end, with up to 63 possible combinations using one or more of the six dots. Braille is the only reliable method of literacy for blind persons, because it enables them to read and write by touch¹.

Currently, Braille is printed by special embossers that serve as a printing press. These embossers create Braille output when it is attached appropriately to computers. The speed of these …

Rheology Of Silica Based Inkjet Coatings And Their Filterability, Peeyush Tripathi

Masters Theses

Coating rheology has long been understood to be a key factor in the smooth operation and performance of a coater. As coaters run faster and formulations become more complex, the demands on a coating's rheology grow more stringent.

Silica based coating formulations present unique rheological challenges, thus providing the opportunity for coating formulators to improve their performance through rheological studies under various conditions of shear. Due to rheological restrictions (gelling), silica based coatings are generally applied at 25-26% solids which is very low as compared to calcium carbonate or clay based coating, at 68-70% solids. Consequently, any improvement in coatings …

Lateral Migration Of A Solid Particle In Shear Flow, Wutthapong Jiraporncharoen

Masters Theses

Lateral migration of solid particles in shear flow is observed in various industrial applications. Suspensions in a blade coater, a device used to apply coating pigment to a base paper to improve paper properties, is an example. Particle hydrodynamics will affect the quality of coated paper and runnability of the coater especially when the speed of the coating machine is very high or the pigment concentration is increased.

Many factors will affect the particle migration. The wall repulsion or lubrication effect forces the particle away from a wall to the channel center. The inertial effects are increased by increasing the …

The Effect Of Wet End Operations On Sizing Loss In Alkaline Papers, Suresh B. Cherukuri

Masters Theses

Changes in wet end of alkaline papermaking affect the size development as well as sizing loss. These changes include pH, alkalinity and type of filler used. Precipitated and ground varieties of carbonate fillers and the alkalinity associated with · them are believed to be the causes for the gradual sizing loss in alkaline papers due the accelerated hydrolysis reaction of sizing chemicals at higher alkalinity.

Precipitated and ground calcium carbonate fillers are used as fillers and compared to non carbonate filler such as kaolin clay for their response to size development and sizing loss at lower and higher alkalinity ranges …

Effect Of Poly Acrylate Addition On Coating Color Rheology, Water Retention And Coating Performance, Shambhu Nath

Masters Theses

Five polyacrylate samples were used to study their effects on coating color rheology, water holding and runnability. The Cylindrical Laboratory Coater was used to apply the coatings and study the runnability of the coating colors. The healing tendencies of the coatings were studied by inducing a scratch under the blade. The higher acid level and degree of crosslinking of the polyacrylate gave higher viscosity and the higher acid level also gave higher water retention. Coating colors containing polyacrylates were less prone to dilatancy at high shear. The addition of polyacrylate reduced the healing of coating colors, but for the same …