Wood Science and Pulp, Paper Technology Commons^™

Attitudes And Perceptions Of College Students And Recent College Graduates Towards Forestry And Wood Products Science Fields, Amanda Peres Vieira Bedette

Theses and Dissertations

Over the past few decades, university level US Forestry and Wood Science and Technology programs have faced declining enrollment. As a result, the seeming disinterest of younger generations has impacted employment in these sectors. In an attempt to bridge the communication gap among colleges/industries, this study was created to attract the interest and maintain the enthusiasm of new generations of professionals and currently enrolled college students in the United States. In September 2021, an online survey was created and distributed to over 1500 alumni and students and received 1,495 usable surveys. Analysis performed on the resultant data included descriptive statistics …

Wood Properties And Utilization Of Assorted Hardwoods, Roger Dustin Snow

Theses and Dissertations

This work is made up of three parts. Part one looks to establish design values for two types of three ply access mats from the U.S. South and Midwest. The mats were subject to 3 point bending tests to determine strength and stiffness values. Values for MOE (Modulus of Elasticity) and MOR (Modulus of Rupture) are reported by region and mat design. Part two tested five species groups of hardwoods for wear resistance and hardness. These species groups include white oak, red oak, ash, sweetgum and hickory. These tests for wear were performed on a Navy-Type Wear Tester according to …

Enhancing The Performance Of Dowel Type Fasteners And A Case Study Of Timber Truss Failure, Lon A. Yeary

Theses and Dissertations

This document will outline the findings of three separate and independent studies: Study 1: In or around 1972, an experimental building was constructed. One of the intents of the construction project was to demonstrate advancements in wood building construction design. It was value-engineered throughout. That is, its materials and systems were intended to function at or near design capacity. In 2019, part of the roof of the structure collapsed. This case study investigates two potential factors that led to the failure: stress concentration in excess of the 12 allowable stress for 2 × 4 web members and insufficient plywood sheathing …

Timber Talk, Vol. 60, No. 1, March 2022

Timber Talk: Nebraska Forest Industry Newsletter

Lumber market reports

Hardwood lumber prices

Log matchmaking program launch, Heather Kingery

Save the date! – “Managing CarbonThrough Healthy Forests in theSouthern Great Plains”

Upcoming NFS cedar managementand utilization workshop series

Timber sales

Trading post

Understanding The Utilization Of Woody Biomass Through The Perspectives Of Southwest United States Forest Service Land Managers: A Qualitative Study, Mary-Ellen Reyna

Graduate Student Theses, Dissertations, & Professional Papers

Dry ponderosa pine/mixed conifer stands in the Southwestern United States create an overabundance of woody biomass during restoration and fuel treatments. It has been the job of land managers and resource specialists to develop management goals and practices to treat stands and lower the risk of catastrophic wildfires while managing for accumulations of woody biomass. Knowing the limitations, setbacks, and successes will help researchers, the United States Forest Service, and other land managers better improve woody biomass utilization. In conjunction with three previous ForBio Southwest studies, we present results from ten phone interviews from three Arizona and New Mexico ranger …

Properties And Environmental Impacts Of Sustainable Electrically Conductive Composites Of Carbonized Pulp Fibers And Recycled Polyamide 12, Chinmoyee Das

Dissertations, Master's Theses and Master's Reports

Electrically conductive composites are polymer composites filled with electrically conductive filler. Electrically conductive composites can be implemented in the development of lightweight electrically conductive components for the automotive industry. Traditional electrically conductive composites incorporate synthetic carbon-based fillers that have good properties but are very expensive and highly energy intensive, creating the need for a sustainable and cost-effective replacement. This study explores the effectiveness of biocarbon fibers developed from Douglas fir pulp fibers as a potential electrically conductive filler in recycled polyamide (PA) 12 composites.

Biocarbon fibers were developed from pulp by carbonization of the feedstock at 1000° C in an …

Recovering And Upgrading Kraft Lignin For Application In Flexible Polyurethane Foam, Peng Quan

Dissertations, Master's Theses and Master's Reports

Lignin is the second abundant natural polymer and has been highlighted as a potential substitute for fossil-based raw materials. However, the inherent molecular heterogeneity and the complex recovery processes result in the challenge of controlling the molecular properties and value-added applications of lignin in large scale. To address those issues, a novel acid-liquefaction process was developed in this study to recover Kraft lignin with improved molecular homogeneity directly from black liquor.

In the first study, the liquefaction parameters were screened based on yield and molecular weight properties of the recovered lignin. Then, the recovered lignin samples were used to replace …

Evaluation Of Cross-Laminated Timber Panels Produced With Yellow-Poplar (Liriodendron Tulipifera), Rafael Da Rosa Azambuja

Graduate Theses, Dissertations, and Problem Reports (ETD)

Cross-Laminated Timber (CLT) panels are engineered wood products breaking into the building sector. Currently, the range of raw materials used in CLT is still limited to softwoods, while some hardwood species such as yellow-poplar could potentially be used to produce this wood product. Therefore, the main goal of this research was to assess the feasibility of using Appalachian Hardwoods in the production of Cross-Laminated Timber panels. Specifically, the objectives of the research were to 1) Determine the amount of yellow-poplar structural lumber that can be obtained from a representative population of low-grade, yellow-poplar lumber graded for appearance; 2) Evaluate whether …

Application Of Mass Spectrometry For Characterization Of Plant-Based Phenolics And Alkaloids, Masoumeh Dorrani

Theses and Dissertations--Chemistry

Plant-derived compounds have the potential to produce value-added compounds with a variety of applications. For example, the lignin part of the lignocellulosic biomass, produced in large quantities as waste from the paper and pulp industries, is a rich source of phenolics with potential applications in the renewable energy sector, pharmaceutical, and chemical industries. On the other hand, plant alkaloids are the primary source for developing plant-derived therapeutics. Unfortunately, the recalcitrant nature of plant cell walls, low extraction yields of small secondary metabolites, and the lack of effective analytical methods for a rapid and accurate identification of plant-based compounds and plant’s …

Field Durability Test Of Clt Wall Envelope Using Physical Barriers Against Termites And Structural Performance Of Nailed Hold-Down Brackets Connected To Fungus-Exposed Clt Walls, Kamal Neupane

Theses and Dissertations

The effectiveness of using commercial polyethylene flashing and stainless-steel mesh in CLT wall systems as the termite barriers were evaluated in a short-term field test. American Wood Protection Association (AWPA) E21's visual ratings ranged from 10 to 9 in the specimens showing little damage when no physical barriers were used. Termites were able to crawl beyond the physical barriers in few specimens showing the necessity of further research on height and installation method of physical barriers. On the second part, the effect of decay caused due to Postia placenta, a brown-rot fungus, on the structural performance of hold-down brackets connected …

Wood City: Timberizing The City’S Building Blocks, Stephen Luoni

Community Design Center Faculty Publications and Presentations

"Wood City" applies mass timber engineering to the 19 building categories that essentially shape our built environments, otherwise financialized as real estate products by Wall Street. Suburban offices, fast-food restaurants, metal warehouses, big-box grocers, garden apartments, single-family houses, hotels, self-storage facilities, assisted living facilities, strip-shopping centers, etc. constitute 75% of the built environment. Given that the US will double its built environment in just one generation coupled with the urgency to develop low-carbon futures, what if cities were built from the only construction system sequestering carbon and engineered to be “energy positive” – wood? Real estate value chains are undergoing …

Assessing Freezing Effect On Kiwifruit Cultivars And Mapping Suitable Areas For Growing The Crop In Eastern Texas, Lais De Oliveira Machado

Electronic Theses and Dissertations

Kiwifruit is a perennial vine originating from China where it has been grown for centuries. In the United States, green kiwifruit (Actinidia deliciosa) is primarily produced commercially in California. They are fuzzy, green fleshed and well known in the marketplace. Kiwifruit plants require low to moderate soil pH, adequate winter chilling and adequate precipitation to guarantee plant development and good fructification. Actinidia chinesis or golden kiwifruit are smooth skinned, feature golden flesh and are a more recent introduction into the global market. Kiwifruit crops have attributes that favor production in east Texas, including low pest problems, current long …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

Economic Contribution Of The Agricultural Sector To The Arkansas Economy In 2019, Leah English, Jennie Popp, Wayne Miller

AAES Research Reports and Research Bulletins

Agriculture and associated agricultural activities are major contributors to the Arkansas economy. Agriculture is defined as the sum of agricultural production and processing activities, unless otherwise specified, and includes crop and animal production and processing, agricultural support industries, forestry and forest products, and textile goods. Agriculture contributes to the economy through direct agricultural production and value-added processing, leading to economic activity in other parts of the economy.

This report is the fourteenth in a series that examines agriculture’s economic contribution to the Arkansas economy. The total economic contribution of agriculture (direct, indirect, and induced effects) on value added, employment, and …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Influence Of Decay Fungi On Selected Anatomical Properties Of Aningeria Robusta A. Chev. Wood, Olayiwola Olaleye Ajala, Funke Grace Adebawo, Emmanuel Adekanye Adelusi, Olaoluwa Adeniyi Adegoke

Journal of Bioresource Management

Due to population explosion, the forest of Nigeria like most tropical forest is over exploited for choice traditional species. Therefore, need to investigate species that can substitute the species arise. Five trees of Aningeria robusta were harvested from Cocoa Research Institute of Nigeria. Bolts of 50cm length were obtained at the base, middle and the top; radial strips also obtained for innerwood, middlewood and outerwood. Ten test specimens of dimension 12mm x 15mm x 25mm were obtained per zone. N-hexane heartwood extracts of a 30 year old Gliricidia sepium diluted with kerosene using volume by volume method into 0%, 25%, …

Stomatal Conductance And Reed Canary Grass Suppression Traits Of Native Michigan Trees, David E. Martinez Vasquez, Martin L. Vanderschoot, David Warners

Summer Research

Reed canary grass (Phalaris arundinacea), a prominent invasive understory species, threatens native Michigan biodiversity statewide. A notable affected area includes a stretch of agricultural land along Schooley Drain in Caledonia, MI, located in the headwaters of the Plaster Creek watershed. Our study pursues the following questions: “Do native trees provide enough shade to reduce the growth of Reed canary grass?” and “Which native trees best transpire water from a floodplain?”: To answer these questions, we initiated a long-term evaluation of seven different species of native Michigan trees to investigate which species best inhibits the growth of reed canary grass and …

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …

The Politics Of Biomass Energy In California: How External Benefits Are Used To Support An Economically Marginal Sector, Dana L. Dysthe

Cal Poly Humboldt theses and projects

Since the 1990s, there has been a decline in biomass energy generation in California. In order to promote state governmental policies aiming to increase biomass energy generation in California, the sector has been linked to a series of external benefits that biomass energy purportedly brings. Through document analysis, semi-structured interviews, and participant observation, five distinct external benefits were identified that have been used to promote the biomass energy sector. These external benefits are: renewable energy generation, air quality improvements, promotion of forest restoration and fuel removal projects, disposal of wood waste from agricultural and forestry sectors, and rural economic development. …

Economic Contribution Of Agriculture And Food To Arkansas' Gross Domestic Product 1997-2019, Leah English, Jennie Popp, Wayne Miller

AAES Research Reports and Research Bulletins

Agricultural production, processing, and retail industries are major contributors to Arkansas’ GDP. Agriculture contributes to the state economy through direct agricultural production, value-added processing, and agricultural retail activities. The Agriculture and Food Sector, which is comprised of agricultural production, processing, and retail industries, promotes economic strength through various interactions with other industries. The use of non-agricultural goods and services as inputs into the agricultural sector promotes diversified growth in Arkansas’ economy and thus plays a vital role in maintaining economic stability throughout the state. This report 1) compares the relative size of the Agriculture and Food Sector in Arkansas with …

Cellulose Based Separator For High-Performance Lithium-Ion Batteries, Akshit Vaidya

Masters Theses

During the past two decades, lithium-ion batteries (LIBs) have gained great success in the field of portable devices, and currently, are penetrating to the market of vehicles. Compared to the fast development of LIBs, little efforts have been dedicated to the separator, which is one of the most important components of LIBs. Primarily, the lithium-ion battery separator has two functions, one is to prevent direct contact between the positive and negative electrodes, and the other is to provide a path for effective ionic transportation. Currently, the separator market of LIBs is dominated by polyolefin materials such as polypropylene, polyethylene, and …

Economic Contribution Of Forest Sector In Kentucky: Community Dependence And Economic Well-Being, Kamana Poudel

Theses and Dissertations--Forestry and Natural Resources

Rural communities depend on the forest sector to fulfill their subsistence needs and maintain economic well-being. The forest sector in Kentucky plays an important role in the state’s rural economic development through provision of market and non-market goods and services along with employment. However, there is lack of understanding of how Kentucky communities’ dependence on forest sector is correlated with the communities’ economic well-being. This research examines the economic contribution of the forest sector and uses common indicators of forest sector dependence and economic well-being to explore the relationship between forest sector dependence and economic well-being at three regional levels …

Internet Of Things For Sustainable Forestry, Abdul Salam

Faculty Publications

Forests and grasslands play an important role in water and air purification, prevention of the soil erosion, and in provision of habitat to wildlife. Internet of Things has a tremendous potential to play a vital role in the forest ecosystem management and stability. The conservation of species and habitats, timber production, prevention of forest soil degradation, forest fire prediction, mitigation, and control can be attained through forest management using Internet of Things. The use and adoption of IoT in forest ecosystem management is challenging due to many factors. Vast geographical areas and limited resources in terms of budget and equipment …

In Pursuit Of Understanding Barrel Variation: Surveying The Lignocellulose Composition And Content Changes In Quercus Alba Barrel Staves During Cooperage And Bourbon Whiskey Maturation, Jarrad Wade Gollihue

Theses and Dissertations--Plant and Soil Sciences

Bourbon whiskey is a distilled spirit which is a uniquely American with several legal requirements including 1) the major grain in the mash is corn, 2) must be aged in a new charred white oak barrel, and 3) made in the United States of America. Kentucky is the whiskey historical home, producing most of the bourbon in the United States. Interest in whiskey has developed a need to understand more about the underlying chemistry of bourbon. The charred white oak barrel used in bourbon production is of substantial interest because the barrel has been implicated in giving American whiskey its …

Comparison Of The Batch And Individual Log Study Methods For Use In Determining Log Breakeven Pricing, Levi Eric Sisler

Graduate Theses, Dissertations, and Problem Reports (ETD)

Understanding log yields and overrun is critical to a profitable sawmill operation. Lumber yield and overrun data can be gathered through one of two types of sawmill studies: batch studies or individual log studies. Little to no research has previously been conducted to determine if one method provides more reliable results than the other method. For this effort, 16 batch studies were conducted. Individual log studies were also conducted on the same logs, allowing a direct comparison of the results from both study types. A breakeven analysis was conducted for each study type, which determined the amount of variability in …

Optimized Production And Evaluation Of Cellulose Nanocrystals Derived From Pre-Extracted Kraft Pulp Of Different Wood Species, Gurshagan Kandhola

Graduate Theses and Dissertations

Production of nanocellulose from a variety of naturally abundant, locally available and industrially significant wood species provides an opportunity for diversifying the portfolio of traditional pulp and paper industries. The U.S. has a prolific forest products industry with a well-established infrastructure that could be utilized for optimized and customized production of cellulose nanomaterials. However, to achieve that, it is important to a) understand how biorefining strategies for complete fractionation of biomass affect the downstream processing of pulp into nanocellulose, b) maximize the yields of cellulose nanocrystals and nanofibers (CNCs and CNFs) from pretreated raw materials, and c) evaluate if the …

Economic Contribution Of The Agricultural Sector To The Arkansas Economy In 2017, Leah English, Jennie Popp, Wayne Miller

AAES Research Reports and Research Bulletins

Agriculture and associated agricultural activities are major contributors to the Arkansas economy. Agriculture is defined as the sum of agricultural production and processing activities, unless otherwise specified, and includes crop and animal production and processing, agricultural support industries, forestry and forest products, and textile goods. Agriculture contributes to the economy through direct agricultural production and value-added processing, and also leads to economic activity in other parts of the economy. This report is the eleventh in a series of reports examining agriculture’s economic contribution to the Arkansas economy. The total economic contribution of agriculture (direct, indirect, and induced effects) on value …

Introduction To Sorghum Paper Production, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Sorghum is a tall grass used for many commercial products such as fodder and syrup. The 10 to 15 feet stalk of the plant has lower lignin than wood and provides a fiber length of 2.31 mm in the outer covering and 1.38 mm for the leaf. Sorghum fiber makes a high quality, strong paper suitable for printing, packaging and paperboard.

2019 Annual Report, Ben Bohall, John Erixson

Nebraska Forest Service: Publications

No abstract provided.

Lignocellulosic Biomass Derived Activated Carbon For Energy Storage And Adsorption, Changle Jiang

Graduate Theses, Dissertations, and Problem Reports (ETD)

Lignocellulosic biomass has been converted to hierarchical porous carbon materials which possess macro-, meso- and micro-pores. The natural structure of porous lignocellulosic structure was preserved during activation with further developed porosity by the activation. The activated carbon can be well applied to electrochemical double layer capacitor for transportation storage of ions as well as adsorbent materials for metal ion removal from wastewater.

The first chapter of this dissertation presents an introduction of biomass derived carbon and its applications. In the second chapter, both direct and indirect activation methods using carbon dioxide were adopted in this study. The results show that …