Systems Engineering Commons^™

Development And Assessment Of A Model-Based Framework On User Toolkits, Brandon J. Koury

Theses and Dissertations

The Department of Defense (DoD) has a limited number of resources to accomplish a variety of missions which involve deploying personnel to support and maintain aircraft operating throughout the world. The DoDs maintenance structure codes maintainers to perform maintenance on specific airframes. This structure limits the flexibility of maintainers and leads to deploying resources in a reactionary manner to address capability gaps in deployed environments. The Just-In-Time Multi-Mission Airman (JIT MMA) concept aims to resolve these issues. Currently, the necessary technologies are unknown, but user toolkits are a concept to consider. A user toolkit is a concept that allows users …

Exploring The Value Of Training System Alternatives Through Methods Technologies, And Relevant Attributes, Brian R. Novitsky

Theses and Dissertations

Skilled maintainers are being lost at a higher rate than average of all enlisted career fields within the Air Force. Although incentive programs can provide some retention, attrition rates may continue to vary, placing the readiness of the warfighter in jeopardy. Additionally, the technologies used to train maintainers have evolved substantially, including augmented reality (AR) and virtual reality (VR) solutions, among others. These technologies have recently gained notoriety as novel ways to increase training effectiveness, providing avenues for maintainers to achieve greater skill levels at a faster rate than traditional platforms. Through semi-structured subject matter expert (SME) interviews, this qualitative …

Networked Cooperative Autonomous Munitions Digital Twin Modeling Utilizing Model Based Systems Engineering, Christopher R. Reed

Theses and Dissertations

An example of a high-complexity system is a swarm of Networked Cooperative Autonomous Munitions (NCAM) that prioritize wide area search and multiple view target confirmation. First, this research discusses methods toward building behavioral models within a Model-Based Systems Engineering (MBSE) tool. Then, this research presents the parallel modeling effort of NCAM in two environments: the MBSE model in Cameo Systems Modeler, and a physics-based model in the Advanced Framework for Simulation, Integration, and Modeling (AFSIM). Each digital model in its environment provides distinct benefits to the stakeholders of the design process, so the models must present consistent and parallel information. …

A Decadal Analysis Of Shifts In Engineering Manufacturing Development Factors For Dod Assets, Michael J. Smith

Theses and Dissertations

This research involves the analysis of standard parametric factors by decade within the development stage of acquisitions. Analysts use factors to develop budgets, create a baseline for measuring project progress, or as a crosscheck to the other estimating techniques. This research analyzed data from 408 1921s across seven decades and eight work breakdown structure (WBS) elements. It further analyzed these decades by commodity type, contract and contractor type, and service branch. The statistical tests used in this research determined which decades within our categories were dissimilar and drew conclusions about the impact of those differences. These tests determined that factors …

Quantifying Project Complexity To Resource Project Managers, Jereme R. Henrard

Theses and Dissertations

This research develops a multi-criteria decision analysis model to quantify project complexity and inform decision-makers in resource-constrained organizations with the Tyndall Program Management Office (PMO) as a case study. The complexity score is used as a risk metric to determine the appropriate number of skilled or novice project managers to effectively manage the PMO portfolio to mitigate cost and schedule overruns. The research provides an innovative approach to consider manning levels at the PMO and other project management-focused organizations/sections.

Geometric Generation Through The Merging Of Sysml, And Engineering Sketch Pad, Alexander J. Miesle

Theses and Dissertations

The United Stated Department of Defense (DoD) and Air Force (USAF) have placed increased emphasis on the utilization of modern systems engineering (SE) practices within the current and future acquisitions lifecycle. This call is driven by the current rate at which near-peer adversaries such as Russia and China are increasing their defense system capabilities and catching up or surpassing the Unites States in certain operational regions. To aid in the transition to a Digital Engineering and Digital Twin dominated acquisitions process, this thesis presents a method with which SysML and geometric tools can be linked within both new and existing …

A Proposed Mission Assurance Framework For University Cubesat Programs, Mitchell R. Thomas

Theses and Dissertations

The low cost, small form factor, and use of Commercial-Off-The-Shelf components make CubeSats an ideal platform for university use given their unique constraints. Since 2000, roughly 55% of CubeSats developed by universities fail to meet mission goals. Mission assurance, which is used to increase confidence in mission success, is based around traditional government programs, and does not provide an adequate road map for universities. Leaving them without specific guidance in tailoring mission assurance activities to operate within their constraints. This paper adapts these traditional practices to develop a baseline mission assurance framework for university CubeSat programs.

A Thematic And Reference Analysis Of Touchless Technologies, Eric R. Curia

Theses and Dissertations

The purpose of this research is to explore the utility and current state of touchless technologies. Five categories of technologies are identified as a result of collecting and reviewing literature: facial/biometric recognition, gesture recognition, touchless sensing, personal devices, and voice recognition. A thematic analysis was conducted to evaluate the advantages and disadvantages of the five categories. A reference analysis was also conducted to determine the similarities between articles in each category. Touchless sensing showed to have the most advantages and least similar references. Gesture recognition was the opposite. Comparing analyses shows more reliable technology types are more beneficial and diverse.

Characterizing Complex-Valued Neural Network Model Approximations Of 4-Input 4-Output Complex-Valued Reference Block Models, Larry C. Llewellyn Ii

Theses and Dissertations

System simulation models are often decomposed and abstracted as a collection of interconnected subsystem block models to facilitate system understanding, design, and analysis. Each subsystem block model contains mathematical functions that receive, process, and transmit signals that are modeled as real numbers, complex numbers, and/or logic values. This dissertation evaluates the use of a single two-layer complex-valued neural network model to approximate 4-input, 4-output subsystem reference block models in terms of accuracy, performance, and error. The research is novel in that it uses a neural network for continuous function approximation instead of data categorization; it uses a neural network designed …

Accelerating Transition To Production By Manufacturing Readiness Focus During Development, William K. Duncan

Theses and Dissertations

The Department of Defense has adopted management tools, such as Manufacturing Readiness Levels (MRLs), which seek to address issues that have delayed the transition to production and delivery of deployment-ready systems. The MRL scale and assessment process institutes periodic reviews of products during the acquisition process. Specifically, MRLs provide a scale to measure, and importantly communicate, progress by evaluating and summarizing multiple aspects of product maturity. Unfortunately, issues are often identified during the periodic assessments which, if addressed earlier, would have further streamlined product delivery. The current research applies Model Based System Engineering tools to analyze and refine organizational structures …

Improving Task-Operator Analysis For Training Through The Integration Of Human Learning Taxonomies And Systems Engineering Models, James M. Earley

Theses and Dissertations

Training is a critical part of force sustainment, but the life-cycle cost of recurring training can be quite high. Further, the promotion of the Multi-Capable Airman (MCA) concept leads to questions on how best to train airmen on tasks outside of their core career field. The MCA concept, coupled with continued increase of technology effectiveness, incentivize the replacement of formerly in-residence-only training with distance training that enables Just-in-Time (JIT) learning. However, effective implementation of the MCA concept may also require adaptive training which considers the knowledge, skills, and attitudes (KSAs) developed by a trainee within their core career field when …

Tools & Visualization Techniques Available To Support The Operations Manager, Kirk Michealson

Operations Management Presentations

Most organizations provide their employees the Microsoft Office Tools Suite with Excel. The University of Arkansas Master of Science in Operations Management (MSOM) Program has included Excel as a foundational aspect of the program for the last 7 years. In that time, Microsoft has increased the Excel capabilities dramatically. Simultaneously, business intelligence analytics interest has increased, and Tableau has been created as a visual analytics platform to help users see and understand data for modern business intelligence. As a result, to support the Operations Manager the MSOM Program has developed a new course to present the additional tools and visualization …

Agile Research - Getting Beyond The Buzzword, Trupti Narayan Rane

Engineering Management & Systems Engineering Faculty Publications

"Oh yeah, we're an Agile shop, we gave up Waterfall years ago." - product owners, managers, or could be anyone else. You will seldom have a conversation with a product or software development team member without the agile buzzword thrown at you at the drop of a hat. It would not be an oversell to say that Agile software development has been adopted at a large scale across several big and small organizations. Clearly, Agile is an ideology that is working, which made me explore more on its applicability in research. As someone who has been in the Information Technology …

Blockchain-Based Digital Trust Mechanism: A Use Case Of Cloud Manufacturing Of Lds Syringes For Covid-19 Vaccination, Trupti Rane, Jingwei Huang

Engineering Management & Systems Engineering Faculty Publications

Trust is essential in the digital world. It is a critical task to build digital trust for the ongoing digital engineering transformation. Aiming at developing a blockchain-based digital trust mechanism for Cloud Manufacturing or Manufacturing-as-a-Service (MaaS), in this paper, we use the manufacturing of low dead space (LDS) medical syringes through Cloud Manufacturing as a motivating scenario to develop a basic framework. To meet the need of optimally saving COVID-19 vaccine doses to save more lives, the medical device manufacturing community needs to make a swift move to meet the surged need for LDS syringes. Cloud Manufacturing is a form …

Adapting The Human Factors Analysis And Classification System For Commercial Fishing Vessel Accidents, Peter Zohorsky, Holly Handley, Ronald Boring (Ed.)

Engineering Management & Systems Engineering Faculty Publications

The commercial fishing industry is frequently described as one of the most hazardous occupations in the United States. The objective, to maximize the catch, is routinely challenged by a variety of elements due to the environment, the vessel, the crew, and how they interact with each other. This study developed and evaluated a version of Wiegmann and Shappell’s (2003) Human Factors Analysis and Classification System (HFACS), specifically for commercial fishing industry vessels (HFACS-FV), using data from ten years of fatal fishing vessel accidents. For this study, the accident investigation information was converted into the HFACS-FV format by independent raters and …

A Primer On The Human Readiness Level Scale (Ansi/Hfes 400-2021), Kelly Steelman, Holly Handley, Katie Plant (Ed.), Gesa Praetorius (Ed.)

Engineering Management & Systems Engineering Faculty Publications

"The Human Readiness Level (HRL) Scale is a simple 9-level scale for evaluating, tracking, and communicating the readiness of a technology for safe and effective human use. It is modeled after the well-established Technology Readiness Level (TRL) framework that is used throughout the government and industry to communicate the maturity of a technology and to support decision making about technology acquisition. Here we (1) introduce the ANSI/HFES 400-2021 Standard that defines the HRL scale and (2) provide concrete examples of evaluation activities to support the application of HRLs in the development of automated driving systems."

Machine Learning In Requirements Elicitation: A Literature Review, Cheligeer Cheligeer, Jingwei Huang, Guosong Wu, Nadia Bhuiyan, Yuan Xu, Yong Zeng

Engineering Management & Systems Engineering Faculty Publications

A growing trend in requirements elicitation is the use of machine learning (ML) techniques to automate the cumbersome requirement handling process. This literature review summarizes and analyzes studies that incorporate ML and natural language processing (NLP) into demand elicitation. We answer the following research questions: (1) What requirement elicitation activities are supported by ML? (2) What data sources are used to build ML-based requirement solutions? (3) What technologies, algorithms, and tools are used to build ML-based requirement elicitation? (4) How to construct an ML-based requirements elicitation method? (5) What are the available tools to support ML-based requirements elicitation methodology? Keywords …

Theorizing The Initial Response Of Countries In Bringing Covid-19 Pandemic Under Control: The Effect Of Change Readiness Of Countries, M. Mahdi Moeini Gharagozloo, Farinaz Sabz Ali Pour, Chen Chen, Mozhgan Moeini Gharagozloo

Engineering Management & Systems Engineering Faculty Publications

Pandemic crises can bring the biggest and deepest shocks to countries around the world. In the first quarter of 2020, a global pandemic named “COVID-19” spread all over the world and not only took so many lives and created so much fear but also brought a tremendous financial pain as a result of shutting down economies to fight with this unknown contagious virus. This paper examines how countries’ change readiness enables them to bring the spread of an international crisis under control. We propose that higher levels of change readiness would help countries to cope with risks and uncertainties generated …

System And Risk Analysis Of Cloud Manufacturing System, Trupti Narayan Rane

Engineering Management & Systems Engineering Faculty Publications

The Cloud manufacturing(C-Mfg) system involves remote distributed manufacturing resources and capabilities collaborating as a single virtual entity. The system receives orders for custom products and provides manufacturing as a service to the end customers. The primary activities of the system, among others, are transaction control, resource allocation and monitoring, distributed manufacturing, quality control, and delivery of consignments to the customers. The actual manufacturing is done by a network of third-party partner manufacturers providing the services to end customers, helping them with cost reduction, shorter time-to-market, and enabling efficient collaboration between manufacturers in the CMfg network. This paper aims to deep …

The Toyota Production System (Tps) In A Non-Traditional Manufacturing Environment: The Role Of Standardization In The Fast-Food Industry, Kevin Mccracken

Theses and Dissertations--Manufacturing Systems Engineering

The Toyota Production System (TPS), also known as Lean Manufacturing (LM), was founded in the automotive industry and has contributed to Toyota’s decades of success. This has brought much attention to TPS and how this system may be implemented in other industries. Focusing on the TPS foundational element of standardization, this study examines the impact of target cycle time (TCT) on process fluctuation in a fast-food environment. In order to observe the effects of TCT, team members within 3 production lines were timed. Times were measured before and after the addition of a TCT to the Standardized Work (STW) in …

Model-Based Systems Engineering For A Small-Lift Launch Facility, Walter Mcgee Taraila, Sharanabasaweshwara Asundi

Mechanical & Aerospace Engineering Faculty Publications

A study of model‐based systems engineering (MBSE) applied to a small‐lift launch facility is presented. The research uses Systems Modeling Language (SysML) products and functional diagrams to document the ground systems on a launch pad servicing a small class payload (0–2 tons). With the projected growth in launch cadence of small‐lift rockets in the coming decade, there is a need to design increasingly complex launch systems with greater efficiency. The potential improvements in project communication, quality, and productivity are explored by developing a model following the ISO/IEC 15288 technical process framework and the International Council on Systems Engineering (INCOSE) Object‐Oriented …

A Unified Health Information System Framework For Connecting Data, People, Devices, And Systems, Wu He, Justin Zuopeng Zhang, Huanmei Wu, Wenzhuo Li, Sachin Shetty

Information Technology & Decision Sciences Faculty Publications

The COVID-19 pandemic has heightened the necessity for pervasive data and system interoperability to manage healthcare information and knowledge. There is an urgent need to better understand the role of interoperability in improving the societal responses to the pandemic. This paper explores data and system interoperability, a very specific area that could contribute to fighting COVID-19. Specifically, the authors propose a unified health information system framework to connect data, systems, and devices to increase interoperability and manage healthcare information and knowledge. A blockchain-based solution is also provided as a recommendation for improving the data and system interoperability in healthcare.

Quantitative Methods For Total Lifecycle Risk Likelihood And Impact Assessment In Sustainable Product Design Decision Making, Christian Enyoghasi

Theses and Dissertations--Mechanical and Aerospace Engineering

Sustainable products promise significant economic, environmental, and societal benefits. Numerous methods are available for use during the new product development process to identify alternate product designs that optimize sustainability performance. Once any such design is selected and the product is launched, many uncertainties are likely to affect its performance over the total lifecycle. Such uncertainties give rise to risks that can influence the overall product sustainability performance. However, comprehensive quantitative methods to evaluate the likelihood or the impact of different risks to enable sustainable product design decision making are lacking.

This research aims to address this gap by developing a …

A Variable Node Optimization Model For Byzantine Fault Tolerant Systems, Ian Robert Fulton

Masters Theses

“Byzantine Fault Tolerance (BFT) has been a major subject of study over the last two decades with increasing societal dependance on secure, correct, and reliable computer systems and online services. This research presents a model for high-level optimization of emerging systems that rely on these BFT algorithms and use a variable numbers of decision nodes. The model highlights the relationship between the security of a system and its efficiency. Two experiments were performed to determine system performance by varying the number of compromised nodes, decision nodes, and total nodes. They examine the probability that a transaction will be compromised based …

State Level Trends In Renewable Energy Procurement Via Solar Installation Versus Green Electricity, Eric Michael Hanson

Masters Theses

“In the past 5 years, consumer options for procuring renewable energy have increased, ranging from rooftop solar installation to utility green pricing to Community Choice Aggregation. These options vary in terms of costs and benefits to the consumer as well as grid integration implications. However, little is known regarding how the presence of a wide range of options for utility-scale renewable procurement affects demand for distributed residential solar installations. In theory, there are three possible relationships, (1) positive correlation, where utility-scale and distributed resources complement each other to increase overall production, (2) negative correlation, where utility-scale and distributed resources are …

Simulation-Based Optimization: Implications Of Complex Adaptive Systems And Deep Uncertainty, Andreas Tolk

VMASC Publications

Within the modeling and simulation community, simulation-based optimization has often been successfully used to improve productivity and business processes. However, the increased importance of using simulation to better understand complex adaptive systems and address operations research questions characterized by deep uncertainty, such as the need for policy support within socio-technical systems, leads to the necessity to revisit the way simulation can be applied in this new area. Similar observations can be made for complex adaptive systems that constantly change their behavior, which is reflected in a continually changing solution space. Deep uncertainty describes problems with inadequate or incomplete information about …

Combining Green Metrics And Digital Twins For Sustainability Planning And Governance Of Smart Buildings And Cities, Casey R. Corrado, Suzanne M. Delong, Emily G. Holt, Edward Y. Hua, Andreas Tolk

VMASC Publications

Creating a more sustainable world will require a coordinated effort to address the rise of social, economic, and environmental concerns resulting from the continuous growth of cities. Supporting planners with tools to address them is pivotal, and sustainability is one of the main objectives. Modeling and simulation augmenting digital twins can play an important role to implement these tools. Although various green best practices have been utilized over time and there are related attempts at measuring green success, works in the published literature tend to focus on addressing a single problem (e.g., energy efficiency), and a comprehensive approach that takes …

Grounding Evaluation Capacity Development In Systems Theory, Sarah D. Klier, Raphael J. Nawrotzki, Nataly Salas-Rodríguez, Sven Harten, Charles B. Keating, Polinpapilinho F. Katina

Engineering Management & Systems Engineering Faculty Publications

While “systemic thinking” is popular in the context of capacity development and evaluation, there is currently a lack of understanding about the benefits to employing systems theory in evaluation capacity development. Systems theory provides a useful orientation to the work involved in complex systems (e.g. national evaluation systems). This article illustrates how evaluation capacity development practitioners can use systems theory as a conceptual tool to gain a better understanding of the functional aspects and interrelationships present within a given evaluation system. Specifically, the systems theory perspective can help elucidate the reasons for the success or failure of a given evaluation …

A Human Factors Study Of Risk Management Of Complex Agile Scrum Projects In Large Enterprises, Ravi Kalluri

Engineering Management & Systems Engineering Faculty Publications

Agile Project Management methods have gained phenomenal success in the IT software world in managing projects of high complexity and uncertainty. However, Agile projects come with their unique set of risks. This paper seeks to explore the risks posed by human factors to complex Agile Scrum projects in large enterprises. Project Risk Management is crucial in determining the future performance of a complex project. Increasing project complexity makes it more and more difficult to anticipate potential events that could affect the project and to make effective decisions to reduce project risk exposure. This is even more true for Agile projects …

Improved Warehouse For Smt Material Management Using Modern Technology Retrieval System And Better Traceability, Ferdinand Mabeya

All Graduate Theses, Dissertations, and Other Capstone Projects

Warehouse plays a vital role in the manufacturing and distributing goods from raw material to manufacturer and finally to the end-user. Optimizing warehouse material management will make an impact on productivity, quality, and on-time delivery. My thesis focuses on material management of surface mount (SMT) from suppliers, receiving and inspection, and warehouse to maximize efficiency. With SMT line costing over 2 million, the warehouse material management is improved. Things like cycle count and picking material are much faster. It makes the overall equipment efficiency (OEE) very low. To make this material management process possible, manufacturers must embrace Six Sigma and …