Operations Research, Systems Engineering and Industrial Engineering Commons^™

Simulation Analysis Of Anti-Rollover Mechanism For Vehicles, Mohib L. Raid

Theses

Rollover accidents are considered the most significant safety problems for all classes of light vehicles, especially pickups, Sport Utility Vehicles (SUV), Light Truck Vehicle (LTV) and vans. The main objective of the research is the design of a new mechanism able to keep the vehicle stable under various road conditions and high speeds, to prevent the vehicle from rolling over and to maintain the stability for the vehicle by creating an anti-rolling torque on the vehicle body capable of turning the vehicle smoothly to stable position.

Human Factors Approach Towards Improving Readability Of Bus Schedules, Anand Tharanathan

Theses

Due to an increasing concern over the readability of existing bus schedules of a public transportation agency the schedule format was redesigned. Two prototype schedules were designed based on the gathered information from the literature survey, focus group meetings and data from other public transportation agencies' schedules. One of the prototypes was designed by giving primary importance to the direction of travel and was named the directional prototype schedule. The other prototype was designed by giving primary importance to the day of the week, and was named weekday / weekend prototype schedule. A time based laboratory experiment and a subjective …

Supply Chain Risk Analysis, Venkata R. Kallepalli

Theses

A new decision support system is proposed and developed that will help sustaining business in a high-risk business environment. The system is developed as a web application to better integrate the supply chain entities and to provide a common platform for performing risk analysis in a supply chain. The system performs a risk analysis and calculates risk factor with each activity in the supply considering its interrelationship with other activities. Bayesian networks along with fault tree structures are embedded in the system and logical rules are used to perform a qualitative fault tree analysis, as the data required to calculate …

Supply Chain Risk Mitigation, Roshan R. Pai

Theses

In recent years, especially post 9/11, there has been an increasing awareness for securing business supply chains against probable disruptions. With globalization and lean inventories, the efficiency of supply chain has greatly enhanced over the years, but at the expense of new vulnerabilities. Supply chain vulnerabilities have resulted in disruptions to the economic stability and security. As a result, risk analysis and mitigation has now grown to become one of the key links to business stabilization. To ensure business continuity, it is necessary to identify key assets (physical and operational) within the supply chain and secure them against probable threats. …

Combining Systematic Layout Planning And Computer Simulation In The Design Of Manufacturing Facilities, Akintoye M. Akinyoade

All-Inclusive List of Electronic Theses and Dissertations

In this study, the systematic layout planning (SLP) and computer simulation were combined to improve the layout design of a manufacturing facility using a case study.

The Relationship Of Project Team Attributes To Project Interim Performance, Vickie S. Parsons

Engineering Management & Systems Engineering Theses & Dissertations

The factors associated with project success, or failure, have not been conclusively resolved in the project management literature. The purpose of this research was to investigate the relationship of project team attributes and interim project performance using a statistical research design. An abundance of research has focused solely on the importance of technical project components as they relate to cost, schedule, or technical performance. However, research into internal team attributes has been sporadic and, generally, associated with subjective measures of project performance or less than optimal statistical techniques. Prior assessment of project performance has also been concentrated at project completion. …

Modeling And Validation Of A Brake Hose, Jai Thomas

Masters Theses

Various computer aided design (CAD) softwares have the capability to depict rigid bodies in space accurately. However, the same is not true for the flexible components. This is because flexible components in an automobile are subject to large elastic deformations during the movement of the rigid components to which they are attached.

This research details the application of the principles of computation of the orientation of entities in a simplified coordinate system, vector mathematics, the file I/O features and structured C++ programming to view the rubber hose in CAD after modeling the hose using simulation software. Further validation of the …

Critical Variables Of Solder Paste Stencil Printing For Micro-Bga And Fine-Pitch Qfp, Jianbiao Pan, Gregory L. Tonkay, Robert H. Storer, Ronald M. Sallade, David J. Leandri

Industrial and Manufacturing Engineering

Stencil printing continues to be the dominant method of solder deposition in high-volume surface-mount assembly. Control of the amount of solder paste deposited is critical in the case of fine-pitch and ultrafine-pitch surface-mount assembly. The process is still not well understood as indicated by the fact that industry reports 52-71% surface-mount technology (SMT) defects are related to the solder paste stencil printing process. The purpose of this paper is to identify the critical variables that influence the volume, area, and height of solder paste deposited. An experiment was conducted to investigate the effects of relevant process parameters on the amount …

Modeling And Analysis Of Hospital Facility Layout Problem, Amol Shrikrishna Padgaonkar

Theses

The optimal solution to any facility layout problem is an important aspect and a major concem as it involves significant material handling and transportation cost. The objective is to arrange the departments within the predefined facility boundaries in the way that the interaction between the functions is efficient and the overall movement cost is minimized. While facility layout problems have traditionally focused on manufacturing facilities, there has been little work on analyzing layouts for hospitals. The thesis focuses on hospital facility layout problems (HLP) to (i) minimize the movements of patients and (ii) minimize the movements of accompanying resources such …

A Supply Chain Management Tool For Linking Courses In Manufacturing Engineering , Daniel Waldorf, Sema E. Alptekin

Industrial and Manufacturing Engineering

A Recent Society of Manufacturing Engineers (SME) grant received by Manufacturing Engineering Program at Cal Poly has provided funds to strengthen its curricular focus on supply chain management, flexibility, business skills, quality, and process controls. New courses and laboratories are developed in electronics manufacturing, information technology, and supply chain management. A functioning supply chain environment has been developed to provide vertical integration among several courses. A software tool being developed in-house integrates the activities of the students who play the roles of customers and suppliers. Details of the various components of this comprehensive project are presented in this paper.

Overview Of Metal-On-Polyethylene, Metal-On-Metal, And Ceramic Hip Wear Mechanisms, A. Buford, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Premature failure of orthopaedic hip implants caused by multiple wear mechanisms is the primary failure mode of prosthetic hips. Wearing of the implants may lead to aseptic loosening, biological incompatibilities, and mechanical failure of the implant. In order to prevent or restrict the effects of the wear mechanisms, multiple laboratory studies are being conducted in order to determine each mechanism and its contribution to increased wear rates. This paper combines previous laboratory studies related to the wear of metal-onpolyethylene, metal-on-metal, and ceramic materials. The bulk quantity materials discussed include cobalt chromium alloys, stainless steels, zirconium oxide ceramics, and polyethylene materials …

Wear Mechanisms In Ceramic Hip Implants, M. Slonaker

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The wear in hip implants is one of the main causes for premature hip replacements. The wear affects the potential life of the prosthesis and subsequent removals of in-vivo implants. Therefore, the objective of this article is to review various joints that show lower wear rates and consequently higher life. Ceramics are used in hip implants and have been found to produce lower wear rates. This article discusses the advantages and disadvantages of ceramics compared to other implant materials. Different types of ceramics that are being used are reviewed in terms of the wear characteristics, debris released, and their size …

Wear Mechanisms In Ceramic Hip Implants, M. Slonaker, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The wear in hip implants is one of the main causes for premature hip replacements. The wear affects the potential life of the prosthesis and subsequent removals of in-vivo implants. Therefore, the objective of this article is to review various joints that show lower wear rates and consequently higher life. Ceramics are used in hip implants and have been found to produce lower wear rates. This article discusses the advantages and disadvantages of ceramics compared to other implant materials. Different types of ceramics that are being used are reviewed in terms of the wear characteristics, debris released, and their size …

General Creep-Fatigue Life Prediction Models, J. Toland, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

This paper presents a data bank that was compiled from published and unpublished sources. Using these data, low cycle fatigue curves were generated under a range of test conditions showing the effect of test parameters on the Coffin-Manson behavior of steel alloys. Generic equations have been developed in this paper to predict the creep-fatigue life of high temperature materials. Several new multivariate equations were developed to predict the creep-fatigue life of following alloy groups; I) Cr-Mo steels, 2) stainless steels and 3) generic materials involving the materials from the following alloy groups, solder, copper, steels, titanium, tantalum, and nickel based …

Implementation Of Lean Method And Value Analysis In The Sandblasting Production Shop At Intersign Corporation, Elbert Zeth Nassey

Masters Theses and Doctoral Dissertations

Intersign Corporation is a small signage manufacturing company in Chattanooga, Tennessee, which employs fewer than one hundred workers. The company produces variety of signage products and customized applications including room signs, room IDs, signs, suite IDs, nameplates, safety signs, menus, activity boards, traffic control signs, and many more. One of the company's main products, and the main subject in this study, is sandblasting products. Sandblasting production is a job shop operation which is placed in a 55 x 100 ft building (building B). In the near future, the company will expand this production by moving several workstations into the new …

Investigation Of Nascar Restrictor Plate Manifold Insert Using Wave Engine Simulation And Response Surface Methodology, John Mason Gross Iii

Electronic Theses and Dissertations

With the increasing growth in computer processing power, computer based computational fluid dynamics simulations are finding increasing acceptance and use in the field of internal combustion engine development. Once fully developed, such simulations provide detailed and expedient tools for testing existing theories, as well as new ideas. While numerous studies on wave propagation and fluid flow in intakes manifolds exist, most restrict the analysis to a single intake runner and port, examining only the dynamics from the runner-to-plenum junction downstream to the valve. While such analyses provide comprehensive models for wave propagation dynamics in the runner, little is published on …

Design, Development, And Delivery Of Certificate Programs For Funding Opportunities And Industry Collaboration, Carol Considine, Paul Kauffmann

Engineering Technology Faculty Publications

Many engineering technology departments have four general areas that are used for evaluation of tenure and promotion. These areas include teaching, research and scholarly activities, service, and other professional activities. Although teaching is the primary mission in most engineering technology programs, external funding as part of the research area is playing a larger role in tenure decisions at many universities. Many faculty members in engineering technology programs come from an industrial background and do not have a specific research area of interest and contacts within the research community. These faculty members must look at other avenues to develop the external …

An Integrated Model For Technology Assessment And Choice For Rural Development In Developing Countries, Abdallah Chungu

Tanzania Journal of Engineering and Technology (TJET)

Abstract

Load Flow Solution For Three-Phase Mv Radial Distribution Connected Network Supplying Different Line Topologies, B. J. Kundy

Tanzania Journal of Engineering and Technology (TJET)

In this paper, a load flow solution for the Medium Voltage (MV) three-phase radial distribution in delta-delta (Δ–Δ) connected network supplying different line topologies such as three phase, phase to phase and single-wire earth return (SWER) networks is presented. The general voltage related network equations are developed using Kirchhoff’s voltage and current laws. Development of a solution to the load flow analysis applying the developed general voltage related network equations is proposed in order to evaluate the network voltage profile. Various numbers of arrays are developed for the identification of the network under study. The proposed method is a new …

A System Thinking Approaching Maintenance, Production And Quality, E. A. M. Mjema

Tanzania Journal of Engineering and Technology (TJET)

The concepts of system thinking and its applicability in maintenance management was analysed in this article. The author analysed various maintenance policies, which have inclination to the concept of system thinking. The maintenance policies revisited include the Integration of Maintenance (IM), Total Quality Maintenance (TQMain), Failure Mode and Effect Analysis (FMEA), and Total Productive Maintenance (TPM). All these strategies are aimed at utilising effectively the maintenance personnel by giving some of the responsibilities of maintenance to production personnel. It was found that, although the founder of these techniques did not mention the concepts of system thinking in their methods, however, …

Why Toyota And Honda Topped The 2002 J.D. Power Quality Study, Susan Lightle, Kenneth Yale Rosenzweig, John Talbott

Accounting Faculty Publications

Toyota again topped the annual J. D. Power and Associates quality study released in late May of 2002. Toyota scored the highest mark ever with l 07 defects per l 00 vehicles, while Honda came in second with 113 defects. The study was based on responses of approximately 65,000 new car owners queried during their first 90-days of ownership.

These results do not surprise us, as we have been fortunate to make numerous sojourns to the Toyota plant in Georgetown, Kentucky, and observe the manufacturing processes. These trips were normally facilitated by a former Japanese student of ours, Minako Yanke, …

Evaluation Of The Distribution Of Taguchi's Signal-To-Noise Ratio And The Effectiveness Of The Signal-To-Noise Ratio For Detecting Changes In The Mean And/Or Variance, Jinsuk Lee

Masters Theses

The concept of parameter design developed by Taguchi to achieve robust engineering is widely promoted in industry as a means to design a product whose output is largely immune to noise in the system. Taguchi has used the signal-to-noise (S/N) ratio to summarize measures over the noise factor settings at the parameter design and to allow control of the experiment.

The objectives of this investigation are: 1) to infer distributions of S/N ratios (lower-the-better S/N, higher-the-better S/N, and nominal-the-best SIN), and 2) to determine the effectiveness of the S/N ratio as a means for identifying changes in the mean and …

Value Stream Improvements Using Kanban For The X-Workcell, Jason Noble

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Jason Noble on August 26, 2003.

A Statistical Evaluation Of Risk Priority Numbers In Failure Modes And Effects Analysis Applied To The Prediction Of Complex Systems, Anthony W. Dean

Engineering Management & Systems Engineering Theses & Dissertations

Complex systems such as military aircraft and naval ships are difficult to cost effectively maintain. Frequently, large-scale maintenance of complex systems (i.e., a naval vessel) is based on the reduction of the system to its base subcomponents and the use of manufacturer-suggested, time-directed, preventative maintenance, which is augmented during the systems lifecycle with predictive maintenance which assesses the system's ability to perform its mission objectives. While preventative maintenance under certain conditions can increase reliability, preventative maintenance systems are often costly, increase down time, and allow for maintenance-induced failures, which may decrease the reliability of the system (Ebeling, 1997). This maintenance …

Development Of A Multicriteria Spatial Decision Support System With Application To The Economic Optimization Of Aircraft Based Weather Data Collection, Ganzague Erol Osman Ozan

Engineering Management & Systems Engineering Theses & Dissertations

This research is motivated by the economic optimization of the Troposherical Airborne Meteorological Data Reporting (TAMDAR), an aircraft-based meteorological data collection system. In the envisioned TAMDAR system, meteorological data collected by the onboard sensors of selected aircraft are transmitted to the ground as aircraft fly their missions. The data is processed by a national center, which disseminates the data to diverse users such as weather forecasters and aviation control centers. Substantial government funding is required for the implementation and operation of this new data acquisition system and data transmission expenditures constitute the largest portion of the costs. To achieve economic …

Information System Product Development By Integration Of Kano's Customer Satisfaction Model With Quality Function Deployment, Afife Yesim Sireli

Engineering Management & Systems Engineering Theses & Dissertations

Product development of complex, innovative information technology related systems presents difficult challenges for technology managers, and new product failures are a significant problem. The main reason for this is insufficient decision-making due to the lack of a customer-oriented product development process in the information system (IS) companies, which is often related to deficiencies in cooperation between R&D and marketing departments. Integrating consumer requirements into the product design phase is an important factor for improving market success. Therefore, a product development decision model is needed for the managers of information system companies to make more accurate decisions about the characteristics of …

Optimization-Based Architecture For Managing Complex Integrated Product Development Projects, Hisham Mohamed El-Sayed Abdelsalam

Mechanical & Aerospace Engineering Theses & Dissertations

By the mid-1990's, the importance of early introduction of new products to both market share and profitability became fully understood. Thus, reducing product time-to-market became an essential requirement for continuous competition. Integrated Product Development (IPD) is a holistic approach that helps to overcome problems that arise in a complex product development project. IPD emphasis is to provide a framework for an effective planning and managing of engineering projects. Coupled with the fact that about 70% of the life cycle cost of a product is committed at early design phases, the motivation for developing and implementing more effective methodologies for managing …

Preface, The Editors

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

No abstract provided.

Investigation Of Initial Fouling Rates Of Calcium Sulfate Solutions Under Non-Boiling Conditions (Work-In-Progress), Feridoun Fahiminia, A. Paul Watkinson , Norman Epstein

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

This study initiates an experimental investigation of how process variables such as temperature and velocity affect the initial precipitation fouling rate of the inverse solubility salt, calcium sulfate, under sensible heating conditions. The effect of fluid velocity and temperature on the delay time is also being measured.

Large-Scale Plasma Polymer Coating On Heat Exchanger Fins For Improving The Wettability, Ki-Hwan Kim, Dae-Hwan Yeu, Samchul Ha, Seok-Keun Koh

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

This research presents the results of the recently developed large-scale hydrophilic polymer coating by plasma polymerization, optimum plasma zone (OPZ) process. The excellent hydrophilicity of heat exchanger fin surface could give good effects to efficient drainage of condensate water as well as heat transfer performance. The hydrophilicity of layer treated by large-scale OPZ system is excellent irrespective of line speed from 0.6 m/min to 2.4 m/min. The good lateral uniformity of the hydrophilicity could be acquired in large scale OPZ treatment. The application of OPZ technique to the heat exchanger could enhance the efficiency of heat transfer, resulting from decrease …