Operations Research, Systems Engineering and Industrial Engineering Commons^™

Technical Problems And Progress In Tanzania, Michael K. Mbwando

Tanzania Journal of Engineering and Technology (TJET)

Abstract

Problem Oriented Teaching, Concept And Implementation, Beat Victor

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Committee For Relations With Industry - Its Role In The Training Of Engineers, A Shayo

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Industrial Projects Recommended By The Faculty Of Engineering Udsm, W Kreuser

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Frontal Instruction Or Group Work, Hans Wagner

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

The Fate Of The Developing Economies, F Mtalo

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

New Directions In Engineering Communications, H Mckague

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

The Development Of The Faculty Of Engineering, Udsm, W Kreuser

Tanzania Journal of Engineering and Technology (TJET)

Although gome of the buildings have not yet been completed, the Faculty has already moved into the new premises. The training workshops where all students spend nearly 5$ of their time during the first year of the undergraduate course are in full owing 'Ince 1973, the first laboratorleg will be ready for operation early 1975. The admi'ßion of students to the four years undergraduate eourøe and the distribution to the departments are represented on the table below.

Technology As General Subject In The Tanzanian Education, A Kanyilili

Tanzania Journal of Engineering and Technology (TJET)

There is no Coubt in Tango-nia tc-'d?.y that wc have accepted as T22tte-r• of policy thc need to el.1ÜhT.size Technology in our (Sce Ilycrcre: -Education for Self—Reliance, education system. Mn,rch 1974; Qanu Directive on Snall Scale Industries, M T.rch 1973 and Resolution 29 of the 16th Party Conference, October 1973) • In spite of all. thcsc ?ronounecnents, howcver, it Is very saa to note that there • very stroma doubt as to whether our education rnd nonpower planners, ond the policy nakers themselves are fully awn.rc of thc corn-plexities orecml— zation required to run a vinyl c, successful TechnolchUca11y based …

Dissemination Of Appropriate Technologies, H Dickinson

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Practical Training Of Students At The Faculty Of Engineering, Udsm, G Roesch

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Plough Parts Production At Ubungo Farm Implements, F Kavishe

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Tanesco's Protection Department, A Fernandes

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

The Technician From The Dar Es Salaam Technical College, C Abayo

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

The Role Of Sido As A Link Between Technical Research At The University And Introduction Df New Techniques In Rural Areas, Sido Sido

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

National Vocational Training Programme, A Atchman

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

An Automatic Rinse Tank Controller For Industrial Applications, Aliasghar Emami

Dissertations and Theses

This thesis describes an automatic Rinse Tank Control System used in detection and removal of contaminating agents from industrial plating rinse tanks. It automatically monitors the purity of the rinse water in sixteen separate rinse tanks, and permits fresh water to enter the tanks only when the conductivity of the rinse water in each tank exceeds a predetermined level. Its use will result in large savings in consumption of fresh water and the subsequent reduction in discharge of effluent to the treatment plants.

Photo And Magnetic Gated Bi-Directional Counter, Charles Burdette Kraemer

Graduate Research Papers

The purpose of this study is to investigate digital counter circuitry, digital logic, and some special applications of digital display systems. The technical data and information ascertained from the research will be used to design and develop a four-digital counter with photo and magnetic gated inputs.

Flood Control Modeling, Peter E. Delle Donne

Retrospective Theses and Dissertations

This is a research report that discusses some continuous and discrete modeling techniques. The report applies these techniques to the analysis of Canal 38 (Kissimmee River) part of Central and South Florida Flood Control District. The analysis is based on recorded data for defining the physical systems parameters. Established parameters are mathematically related to define a descriptive model for Canal 38. The modeling procedure of 'trial and error' is used to assemble the model with measures of merit, the integral square error, and root mean squared error. General simulation considerations are discussed for application of the mathematical model.

Production Attachment For Wood Turning, Julian A. Olson

Graduate Research Papers

As an industrial arts instructor for the short period of three years the writer has recognized a definite shortcoming in his instruction of the woodworking lathe. Instruction related to the woodworking lathe by the conventional "hand tool" methods is most important in leading to the students' understanding of basic turning ideas. This instruction, however, falls short of providing an up-to-date picture of the woodworking lathes used by industry.

As a means of overcoming this problem, the writer undertook the study of lathes as a project for the course, "Projects in Industrial Arts". This research provided information necessary in the construction …

Plastics: Mold Design And Fabrication, Duane H. Rippe

Graduate Research Papers

Students have often asked if additional molds were available which would make different objects other than golf tees. Literature provided with the injection molder described several methods of mold construction which could be fabricated in the school shop. The writer considered the possibility of making another mold, however, a time factor and limited experience prohibited construction.

The problem seemed to be appropriate for the Projects Course 33:270 at the University of Northern Iowa. The course and research involved would assimilate the needed information to construct a mold and to teach plastic injection mold construction more effectively.

An Evaluation Of Demonstrations On Inductor Theory, Boyd Warner Wasson

Dissertations and Theses @ UNI

The writer sought an improved approach for teaching theory of electronics to high school students. This approach was intended to require less expense and time needed to provide classroom instruction on electrical theory.

The purpose of this study were to:

(1) Prepare a number of demonstrations to illustrate phenomena associated with coils or inductors and their use in practical electronics.

(2) Prepare equipment and gather parts needed to perform demonstrations. Ease of construction and economy were important considerations.

(3) Evaluate the effectiveness of the demonstrations on student comprehension and the ability to apply information taught.

The Effects Of Selected Factors On Design Sensitivity, Leslie Horshal Cochran

Masters Theses

Chapter I.

Background of the Study

Introduction

Design is a comprehensive term involving a multitude of areas and activities. Its meaning has varied according to individual tastes and philosophies; however, regardless of the terminology involved, it has always been associated with the planning for an object or a product.

Throughout history the emphasis on design has varied, but its basic framework has been present in all cultures. From the crude but honest designs of primitive man, through the Golden Age of Greece, by means of the Roman Empire, via the Renaissance, and throughout the Eighteenth and Nineteenth Centuries, design served …

Its Shearing Time, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

SHEARING will soon be taking place on your property. For a smooth annual wool harvest, remember:—

Test Of High-Speed Engine, William Frazier Owen

Student and Lippitt Prize Essays

Discusses the best ways in which a steam engine can function by using measurements from an actual steam engine. The essay ultimately determines that a steam engine is at its highest efficiency when carrying the largest load possible.

Lubricating Oils, George Albert Sherman

Student and Lippitt Prize Essays

This essay reviews the elements that would make a lubricating oil effective in preventing wear on an object or machine.

Artificial Refrigeration, Carroll Knowles

Student and Lippitt Prize Essays

Discusses the principles of artificial refrigeration, reviewing agents, engineering methods and transportation of refrigerated foods.