Operations Research, Systems Engineering and Industrial Engineering Commons^™

Development Of A Process Modelling System For Simulation, John Ryan

Other resources

This thesis details the development of a process modelling technique to aid a simulation model developer during the requirements gathering and conceptual modelling phases of a simulation project.

There are a number of process modelling techniques available that are capable of being used during such phases of a simulation project, however there is currently a lack of process modelling techniques developed specifically to aid a simulation model developer in capturing, representing and communicating information and systems issues to persons involved in the operation of discrete systems under investigation.

A detailed review of the literature related to techniques capable of supporting …

A Multi-Server Markovian Queueing Model With Primary And Secondary Services, Valentina Klimenok, Srinivas R. Chakravarthy, Alexander Dudin

Industrial & Manufacturing Engineering Presentations And Conference Materials

We study a multi-server queueing model in which the arrivals occur according to a Markovian arrival process. An arriving customer either (a) is lost due to all main servers being busy; or (b) enters into service with one of the main servers and leaves the system (as a satisfied primary customer); (c) enters into a service with one of the main servers, gets service in self-service mode, and is impatient to get a final service with one of the main servers, may leave the system (as a dissatisfied secondary customer); or (d) enters into service with one of the main …

Machine Vision Course For Manufacturing Engineering Undergraduate Students, Jose Macedo, Kurt Colvin, Daniel Waldorf

Industrial and Manufacturing Engineering

A 10-week course was designed with funding from the Society of Manufacturing Engineers (SME) and input from industry representatives, to offer upper division engineering students a course on advanced automation. The objective was to provide engineering students theoretical and hands-on practical experience with automation technologies that will be of prime importance over the next decade: data acquisition and instrumentation, machine vision and motion control. This paper describes the machine vision portion of that class. It describes important concepts, hands-on equipment, and labs developed for this course, as well as examples of student projects from Spring Quarter, 2004. The course and …

Lead-Free Solder Joint Reliability – State Of The Art And Perspectives, Jianbiao Pan, Jyhwen Wang, David M. Shaddock

Industrial and Manufacturing Engineering

There is an increasing demand for replacing tin-lead (Sn/Pb) solders with lead-free solders in the electronics industry due to health and environmental concerns. The European Union recently passed a law to ban the use of lead in electronic products. The ban will go into effect in July of 2006. The Japanese electronics industry has worked to eliminate lead from consumer electronic products for several years. Although currently there are no specific regulations banning lead in electronics devices in the United States, many companies and consortiums are working on lead-free solder initiatives including Intel, Motorola, Agilent Technologies, General Electric, Boeing, NEMI …

Value Stream Mapping For The Core Department In Foundry Of A Tractor Manufacturing Firm, Narendra Bhati

Graduate Research Papers

A value stream is all the actions required to bring a product through the main flows essential to every product. It begins at the "door-to-door" production flow level and allows you to see the entire picture. It identifies waste and the sources of waste. Provides a common language and questions current decisions that happen by default. It eliminates bias improvement picking. It links material and information flow and gives a qualitative description of how your facility should operate.

An excellent spot for observing the value stream is the aisle of the supermarket. for it is here that a thousand streams …

The Limits Of Reflexive Design In A Secrecy-Based Organization, Michael W. Stebbins, Tali Freed, A.B. (Rami) Shani, Kenneth H. Doerr

Industrial and Manufacturing Engineering

No abstract provided.

Haptic-Based Dental Procedure Training Simulator, Cristian Luciano

Link Foundation Modeling, Simulation and Training Fellowship Reports

Since the beginning of the last century, simulators have been widely used in military and aviation. Recently, the use of simulation in medicine and dentistry has brought the attention of the research community, looking for efficient ways to increase patient's safety by improving surgeon's and dentist's skills. Traditionally, plastic mannequins and cadavers were used to train medical and dental students. However, the lack of details and differences on material properties (in the case of mannequins), and high costs and ethical issues (in the case of cadavers)- supported by the lately improvements of virtual reality, haptics and robotics - have increased …

Details And Description Of Industrial Engineering, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This content paper addresses key questions for students interested in pursuing industrial engineering as an academic major: What is industrial engineering? What personality characteristics do Industrial Engineers have? What types of projects do Industrial Engineers work on? What types of jobs do Industrial Engineers have? Where do Industrial Engineers work once they graduate? How much can Industrial Engineers earn? I have never heard of IE, is it a new area? How do Industrial Engineers benefit society and business? What classes will I take as an industrial engineering student? What are examples of problems I will learn how to solve? Are …

Development Of A Flying Eye: A Project-Based Learning Experience, Sema E. Alptekin, Dianne Deturris, Daniel J. Macy, Jon E. Ervin

Industrial and Manufacturing Engineering

The paper describes the design for manufacturability of a prototype product as part of a manufacturing engineering capstone course. The product chosen was a vertically launched unmanned aerial vehicle (UAV)—the “Flying Eye.” The Flying Eye is an autonomous parafoil surveillance platform quipped with sensors, controllers, mechanical components, and software. Once the autonomous UAV is deployed, it is designed to follow a predetermined flight path down to the ground. The design effort of the prototype device took place over a three-year period as a collaborative effort between the Aerospace Engineering and Industrial and Manufacturing Engineering departments at California Polytechnic State University. …

Participatory Evaluation And Improvement Of Cassava Processing Machines For The Eastern Zone Of Tanzania, V Silayo

Tanzania Journal of Engineering and Technology (TJET)

Cassava processing machines previously introduced in Tanzania were chippers and graters of the International Institute Of Tropical Agriculture (IITA) design. Popularization of such machmes in Tanzania required thorough participatory testing with stakeholders. When tested with farmers in Muheza and Kibaha districts average throughputs were 11-18 kg/h, 752 kg/h and 270 kg/hfor the manual chipper, engine-powered chipper and the engine-powered grater, respectively. Despite their low throughputs the manual chipper and the grater were Veo difficult to operate, and therefore demanded improvement. Improvement on these machines included modifications on the design for increased throughput, ease of operation and safety. The improved machines …

Comparative Study Of The Dynamics Of Circulating Fluidized Bed Riser And Downer Of Equal Diameters, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

The microscopic flow dynamics of the 100-mm internal diameter riser/downer circulating fluidized bed (CFB) unit were monitored using a solids concentration fiber optic probe. The comparison was conducted by comparing radial profiles Of the dynamic parameters derived from time-series analysis techniques (statistical and chaos analyses). The solids concentration signals used were recorded under similar operating conditions (gas velocity of 8.0 m/s and solids flux of 100 kg/m2s). Similar axial elevations were compared (entrance and fully developed sections of die reactors). A1 each loca!ion, the signals were sampled a! afrequency of 970 Hz for duration of 30 seconds. It was observed …

Aeration Efficiency Of A Three-Phase Fluidized Bed Bioreactor During Food Industry Wastewater Treatment, S Manyele

Tanzania Journal of Engineering and Technology (TJET)

The implementation Of a three-phase fluidized bed bioreaclor (TPFBB) in food- processing wastewater (FPW'W) treatment is reported. This study includes the modification Of the air distributor (plate design and gas-liquid mixing) for the bioreactor and resting of its aeration efficiency under different liquids. The aeration efficiency for wastewater samples collected from a soft drink processing industry and tannin processing industry (TANWA T) and tap water were compared. The aeration efficiency parameters studied include bed expansion, air holdup. volumetric oxygen mass transfer coefficient, and alpha factors. The variation of these parameters With air flow rates were studied at different liquid heights, …

Usefulness Of Technology Life Cycle In Tanzania: The Case Of The Ipl Developed Technologies, Abdallah Chungu

Tanzania Journal of Engineering and Technology (TJET)

This study sought to identify the adoption rate of technologv innovations developed by the Institute Of Production Innovation (IPI) at the University Of Dar-es-Salaam since 1984 to 1997 using a sigmoid shaped curve (S-shaped curves) to predict the life cycles of the respective technologies. Depending on the stimuli imparted to the specific technology, some of such technologies for instance, cinva ram and block making machines with hollow/spacer/louver exhibited longer life period as indicated by a series Of infer-connected S-curves. Other technologies including but nor limited to sunflower oil processing kit-winnowers, scorcher with one stove, seed roller, standard wheelbarrow, and manual …

Intelligent Simulation-Based Lot Scheduling Of Photolithography Toolsets In A Wafer Fabrication Facility, Amr Arisha, Paul Young

Conference papers

Scheduling of a semiconductor manufacturing facility is one of the most complex tasks encountered. Confronted with a high technology product market, semiconductor manufacturing is increasingly more dynamic and competitive in the introduction of new products in shorter time intervals. Photolithography, being one of the processes repeated often, is a fabrication bottleneck. Lot scheduling within photolithography is a challenging activity where substantial improvements in factory performance can be made. The proposed scheduling methodology integrates two common approaches, simulation and artificial intelligence. Using detailed simulation modeling within a structured modeling method, a comprehensive model to characterize the photolithography process was developed. An …

Comparison Of Sampling Methods For Flatness Evaluation Using Cmm, Ashish Singhal

All-Inclusive List of Electronic Theses and Dissertations

Efficient part feature verification using Coordinate Measuring Machine (CMM) requires efficient sample point selection as well as accurate zone fitting. This work deals with flatness tolerance evaluation and the Least- Square (LS) technique is used to compute tolerance zone. In regard to the sampling strategy there are several methods commonly employed in Coordinate Measuring Machine inspection literature. The appropriate method is selected according to the accuracy requirement, the geometry features of the work piece, and the condition of the machine producing the work piece. This research focuses on the five sampling methods: Hammersley sequence sampling, Halton-Zaremba sequence sampling, Random sampling, …

Using Simulation Techniques To Evaluate Group Technology Heuristics: A Recommended Methodology For Comparison And Optimization, Ashley Nolen Akerman

Masters Theses

Machine cell formation is an important issue in industrial and manufacturing engineering. Properly assigned machine cells can improve manufacturing system efficiencies and decrease unnecessary material movement. To address the need for proper cell formation techniques a myriad of heuristics have been created that attempt to optimize the grouping of machines. Further, much industrial engineering research has been conducted on the application of simulation technology to manufacturing system evaluation.

The purpose of this thesis is to investigate the combination of traditional machine grouping heuristics with simulation technology and to create a generalized meta-model based upon this evaluation. This investigation analyzes the …

Integration Of Lean Manufacturing And Value Engineering Techniques To Improve The Internal Distribution System In A Manufacturing Company, Sripadjaraj Prahladaraj

Masters Theses and Doctoral Dissertations

The XYZ Corporation is located in Lafayette, Georgia. The company produces cooking ranges for the North American market. It has 1500 employees with a daily production capacity of 1000 to 1500 cooking ranges. The company is implementing lean manufacturing techniques to improve their performance. One of their projects is to develop a distribution system, which will help in streamlining the internal distribution of Very High Pressure (VHP) adhesive tapes. The aim of this research is to develop a lean distribution system by applying techniques of lean manufacturing systems. To understand the existing process of distribution, a flow diagram was created. …

Lead-Free Solder Joint Reliability – State Of The Art And Perspectives, Jianbiao Pan, Jyhwen Wang, David M. Shaddock

Industrial and Manufacturing Engineering

There is an increasing demand in replacing tin-lead (Sn/Pb) solders with lead-free solders in the electronics industry due to health and environmental concern. The European Union recently passed a law to ban the use of lead in electronic products. The ban will go into effect in July of 2006. The Japanese electronics industry has worked to eliminate lead from consumer electronic products for several years. Although currently there are no specific regulations banning lead in electronics devices in the United States, many companies and consortiums are working on lead-free solder initiatives including Intel, Motorola, Agilent Technologies, General Electric, Boeing, NEMI …

Evaluation Of Bus And Truck Automation Operations Concepts, H.-S. Jacob Tsao, Lan Zhang, Lin Lin, Deepa Batni

Faculty Publications

Traffic congestion will continue to worsen and likely worsen at a faster rate than ever. People throughput and freight throughput have become critical issues for California and the rest of the nation. PATH has funded with approximately $125K a research project entitled “Evaluation of Bus and Truck Automation Scenarios” jointly proposed by Jan Botha (Principal Investigator) of Department of Civil and Environmental Engineering and Jacob Tsao (Co-PI) of Department of Industrial and Systems Engineering at San Jose State University. This report summarizes the major findings of the research conducted by Professor Tsao and his assistants with approximately $44K out of …

A Case Study Of Teaching A Quantitative Course Using Archived Streaming Video, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This case study highlights some of the issues and difficulties experienced in teaching a quantitative course using three methods of delivery: in-class to an audience of students, television broadcast over a satellite system to distance students, and archived streaming video accessible by students. The discussion is applicable to administrators and faculty exploring the option of teaching a course using multiple delivery approaches.

Lean Energy Analysis: Identifying, Discovering And Tracking Energy Savings Potential, J. Kelly Kissock, John Seryak

Mechanical and Aerospace Engineering Faculty Publications

Energy in manufacturing facilities is used for direct production of goods, space conditioning, and general facility support such as lighting. This paper presents a methodology, called lean energy analysis, LEA, for graphically and statistically analyzing plant energy use in terms of these major end uses.

The LEA methodology uses as few as 60 easily obtainable data points. Multivariable change-point models of electricity and natural gas use as functions of outdoor air temperature and production data are developed. The statistical models are used to subdivide plant energy use into facility, space-conditioning and production-related components.

These breakdowns suggest the savings potential from …

Work Flow Policy And Within-Worker And Between-Workers Variability In Performance, Kenneth Howard Doerr, Tali Freed, Terence R. Mitchell, Chester A. Schriesheim, Xiaohua Zhou

Industrial and Manufacturing Engineering

Work flow policies are shown to induce a change in average between-workers variability (worker heterogeneity) and within-worker variability in performance times. In a laboratory experiment, the authors measured the levels of worker heterogeneity and within-worker variability under an individual performance condition, a work sharing condition, and a fixed assignment condition. The work sharing policy increased the levels of worker heterogeneity and worker variability, whereas the fixed assignment policy decreased them. These effects, along with work flow policy main effects on mean performance times and variability are examined. This article represents an initial step in understanding effects that may be important …

A Template-Based Conceptual Modeling Infrastructure For Simulation Of Physical Security Systems, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Although simulation is one of the most innovative and cost-effective tools for modeling and analyzing a system, simulation studies often fail to provide any useful results. One reason is attributed to the fact that model formulation depends on the skills of the analyst. This paper describes a research to develop a conceptual modeling infrastructure to assist a simulation analyst in specifying components for studying physical security systems. The modeling framework has been programmed as an internet-based web application. Using the application, the successful development and implementation of a physical security simulation model will be aided by a defined scientific methodology …

Investigating Graphical User Interface Usability On Task Sequence And Display Structure Dependencies, Tirthankar Sengupta

Dissertations

Designing Graphical User Interfaces (GUI) requires the consideration of task sequence requirements (sequence of operations arising from task structures and application constraints) and display structure (layout of the elements of the interface) relationships. The basic purpose was to understand the usability differences of the interfaces through efficiency, motor performance, and search performance.

Thirty-two subjects performed experiments in four groups. The experiments differed in display structure and compatibility of task sequences. Subject mouse actions, mouse coordinates and eye positions were recorded. The derived measures, click efficiency, mouse traversal and eye visits to different areas of interest (namely the tool, object, and …

Wire Bonding Challenges In Optoelectronics Packaging, Jianbiao Pan, Patrice Fraud

Industrial and Manufacturing Engineering

Wire bonding has been used in integrated circuit (IC) packaging for many years. However, there are many challenges in wire bonding for optoelectronics packaging. These challenges include bonding on sensitive devices, bonding over cavity, bonding over cantilevel leads and bonding temperature limitations. The optoelectronics package design brings another challenge, which requires wire bonding to have deep access capability. In this paper, the wire bonding technologies are reviewed and ball bonding and wedge bonding are compared. The variables that affect the wire bonding process are then discussed. Finally, the challenges of wire bonding in optoelectronics packaging are presented in detail.

Effect Of Chromium-Gold And Titanium-Titanium Nitride-Platinum-Gold Metallization On Wire/Ribbon Bondability, Jianbiao Pan, Robert M. Pafchek, Frank F. Judd, Jason Baxter

Industrial and Manufacturing Engineering

Gold metallization on wafer substrates for wire/ribbon bond applications require good bond strength to the substrate without weakening the wire/ribbon. This paper compares the ribbon bondability of Cr/Au and Ti/TiN/Pt/Au metallization systems. Both chromium and titanium are used to promote adhesion between substrates and sputtered gold films. Both can diffuse the gold surface after annealing and degrade the wire/ribbon bondability. Restoring bondability by ceric ammonium nitrate (CAN) etch was investigated. Experiments were conducted to investigate the effect of Cr/Au and Ti/TiN/Pt/Au, annealing, and CAN etch processes on 25.4 times; 254 μm (1 × 10 mil) ribbon bonding. All bonds were …

Derivation And Analysis Of Maximum And Conditional Work Of An Electromagnet In Relays With Small Gaps And Constant Armature Load, Dominic Chambega

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Introduction Of Seismic Resistance Features In The Construction Of Buildings In Tanzania, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Available dara indicates that a greater part of Tanzania lies within a seismic region. to date most Of the buildings in the country have been designed and constructed without considering seismic loads. In addition no design codes have been developed to guide the seismic design for buildings and other related structures in Tanzania. This paper outlines the basic design concepts, which are useful during the design of seismic resistant buildings before the seismic design code is developed and adopted in Tanzania.

Importance Of Structural Fire Protection In Reinforced Concrete Buildings: A Case Study Of Ex-Nasaco Building In Dar Es Salaam, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Reinforced concrete is concrete that is internally reinforced with steel bars or mesh. This gives rhe malerial the compressive strength of concrete along wilh the tensile strength Of steel. Reinforced concrete does not perform well under fire conditions as it spalls and loses strength. Heating Causes a failure Of the bond between concrele and sleels bars and this results in reduction of strength of concrele. Strength of concrete decreases With increase in temperature and increase With time. In order to provide fire resistance to structural components/elements in buildings, it is important Io consider the type of aggregates to be used. …