Mining Engineering Commons^™

Ruger Approximate Formula-Based Prediction Of Fractured Reservoir, Wu Shanshan, Gao Gang, Gui Zhixian, Wang Peng, Li Chengyi

Coal Geology & Exploration

The azimuthal anisotropy of pre-stack P-wave is the most widely used method to detect fracture. This method mainly uses the long-axis and minor axis information of the ellipse fitted by the AVAZ seismic data to evaluate the fracture. When applying it in practice, it is considered that the variation of AVAZ response characteristics in the fractured reservoirs is just determined by the anisotropic parameters, and the influence of non-anisotropic parameters is not taken into account, which leads to the multi-solution of fracture evaluation. In order to improve the accuracy of this fracture evaluation technology, we started with the model analysis, …

Frequency Dispersion Mechanism Of Complex Resistivity Of Coal, Guo Yuehui, Zhang Yugui, Li Jian, Zhou Meng

Coal Geology & Exploration

In order to study the physical mechanism of frequency dispersion of complex resistivity of coal at 0-200 kHz, the amplitude-frequency and phase-frequency of complex resistivity of coal are measured under variable frequency of constant current. Using the Fourier inverse transform to convert the frequency domain data of complex resistivity of coal into time domain data; Using the Cole-Cole model, the complex resistivity dispersion data are fitted; Drawing on the electric double layer deformation hypothesis theory, the dispersion mechanism of complex resistivity of coal is studied by comparing the frequency dispersion of sandstone. The results show that in the current frequency …

Effect Of Temperature On The Performance Of Pdc Cutters With Different Shape, Zhang Suhu, Wang Chuanliu, Dai Yongbo

Coal Geology & Exploration

In order to explore the performance of PDC cutters at different temperatures to adapt to different brazing temperatures, and to reasonably select the shape to improve efficiency. Based on the several main parameters affecting the quality of polycrystalline diamond compacts (PDC), such as wear resistance, grinding time, stationarity and impact toughness, the performance of PDC sheets from different manufacturers and different shapes was tested. The performance of PDC before or after heating and at different temperatures was obtained. At the same time, the performance of flat sheets, micro-arcs sheets and arcs sheets was compared. The results show that with the …

Phytoremediation Of Heavy Metal Contaminated Wastes From Small-Scale Gold Mining Using Pityrogramma Calomelanos, Zar Che Win, Leslie Joy L. Diaz, Teresita R. Perez, Kiyohiko Nakasaki

Environmental Science Faculty Publications

In this study, viability of employing the waste treatment technique for industrial application was conducted by setting up a phytoremediation protocol for field application where heavy metal (Arsenic and Copper) contaminated adsorbents, i.e. coco peat and nanofiber membrane, used for the treatment of wastewater were also included. An arsenic hyperaccumulator, Pityrogramma calomelanos was used for the treatment of mine wastes-tailings, coco peat and nanofiber membrane. Phytoremediation procedure was established by investigating planting parameters namely ; plot height - (9 cm and 15 cm) and planting distance- (15 cm and 20 cm) for a period of five months. Translocation factor and …

Joint Simulation Of Continuous And Categorical Variables For Mineral Resource Modeling And Recoverable Reserves Calculation, Sentle Augustinus Hlajoane

Dissertations, Master's Theses and Master's Reports

Spatial variability and uncertainty of continuous variables (grade) and categorical variables (rock-types) in mineral evaluation significantly impact the economics of mining projects. The conventional approach of simulating grades using deterministic rock- types is problematic since spatial variability, and uncertainty of grades at rock-type contacts are not well captured in deposits where the grade changes gradually between rock-types. Therefore, jointly simulating these variables can improve confidence (reduce uncertainty) in a resource model. Also, resource classification and recoverable reserve calculation can significantly improve the understanding of the deposit and its economic viability. This research utilized the Plural-Gaussian geostatistical simulation to jointly simulate …

Guest Editorial-Special Issue On Ground Control In Mining In 2019, Michael M. Murphy, Ted Klemetti, Heather Lawson, Brijes Mishra, Kyle A. Perry

Mining Engineering Faculty Research & Creative Works

No abstract provided.

Cobalt Partitioning And Solubility In Low-Temperature Carbonate-Hydrothermal Systems, Seth Kurtis Coursey

Graduate Research Theses & Dissertations

Cobalt mineralization has been documented in low temperature Mississippi Valley-type (MVT) deposits in southeast Missouri. Lead and zinc are the most economically important metals in these deposits and are contained within galena (PbS) and sphalerite (ZnS), respectively. Cobalt is also mined in some of the deposits with cobalt-bearing ores, e.g., siegenite ((Ni,Co)3S4) and fletcherite (Cu,(Ni,Co)2S4), occurring stratigraphically below main-stage galena and sphalerite. The hydrothermal fluids responsible for cobalt mineralization are thought to be chemically distinct from the predominant MVT ore-bearing fluids and represent a distinct mineralizing event. Cobalt is likely transported as CoCl2 in hydrothermal fluids and sourced from structures …

Predicting Fracture Extension Around A Borehole Using The Numerical Displacement Discontinuity Method, Nathaniel Schaefer

Theses and Dissertations--Mining Engineering

Prediction of blast damage radius is integral in the optimization of mining safety and production. The damage radius can be related to blasting variables such as fragmentation size as well as overbreak in hard rock. Various methods have been developed to predict and assess damage radius extension for individual holes to aid in blast design. These methods range from experimental and observational techniques to theoretical applications. Some of these methods have been used with a degree of success. However, many of them lack a comprehensive combination of experimental and theoretical contributions. Since post-blast environments are not conducive to assessing whether …

Proof Of Concept For The Development Of A Ground Vibration Sensor System For Future Research In Blasting, John Meuth

Theses and Dissertations--Mining Engineering

Ground vibrations from blasting are one of the leading limitations to mining (underground and surface). There is a need for a low-cost scalable vibration monitoring system to conduct large scale ground vibration projects in the mining industry. Studies conducted on ground vibrations use any number of different sensors to obtain their data, the different sensor capabilities and methods for data processing lead to uncertainties in the research and regulations set for ground vibrations. Commercial Systems do not allow researchers to obtain raw output data, and the data processing procedures are not provided or disclosed for these systems. In order to …

The Effect Of Delay And Sequence On Blasting Fragmentation Results, Tristan Worsey

Theses and Dissertations--Mining Engineering

Blasters use the delay between charges and the firing sequence of the explosive charges to help reduce vibrations and achieve the desired fragmentation. Although delay and sequence are recognized as very important for vibrations and fragmentation, only vibration models consider timing as a variable in the prediction tool, without any known model for fragmentation prediction based on the delay sequence. Of the few fragmentation models available, very few take delay into account and do not give guidance on row delay and/or sequence selections. With the invention of electronic detonators in 1984, there are new avenues to explore with sequence and …

The Potential Of Gold Mine Development Project : A Case Study Of Chifunde District In Mozambique, Sara Mario Mabecuane

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research presents the results of the gold exploration activities developed in the district of Chifunde, Province of Tete in Mozambique. The works showed that in the study area there are two types of deposits which are primary and secondary deposits. There was clear evidence that they have undergone high-grade metamorphism of greenschist due to the grenade occurrences in hornblende in the form of porphyroblast which indicated a high probability of gold occurrence inside amphibolic schist. The results of the SGS laboratory revealed that all samples collected in the area contained gold ranging from 1 to 2,500 ppb, whereas in …

Characterization Of Rare Earth Elements In The Illinois Basin Coals, Alireza Valian

Theses and Dissertations--Mining Engineering

The purpose of this study is to characterize the distribution and occurrence of rare earth elements (REEs) in the coal and coal-related material from the Illinois Basin. For characterizing the distribution of REEs, 17 core samples were investigated from various parts in the basin. Also, several individual samples from coal preparation plants and isolated geological occurrences were included in the study. In result, the average REE concentrations were calculated on a bed-to-bed basis, although the distribution of REEs in the coal beds was found laterally and vertically heterogeneous. A number of trends were found that describe the variations. Most importantly, …

Investigation Into Mine Pillar Design And Global Stability Using The Ground Reaction Curve Concept, Ravi Chandan Ray

Theses and Dissertations--Mining Engineering

Pillars form an important support structure in any underground mine. A bulk of the overburden load is borne by the mine pillars. Thus, the strength of pillars has been a subject of detailed research over more than 6 decades. This work has led to the development of largely empirical pillar design formulations that have reduced the risk of pillar failures and mine collapse. Current research, however, has drawn attention to the fact that some of the assumptions used in the development of conventional pillar design methodologies are not always valid. Conventional pillar design methodology assumes that the pillars carry the …

Numerical Approximation Of The Ground Reaction And Support Reaction Curves For Underground Limestone Mines, Jesus Castillo Gomez

Theses and Dissertations--Mining Engineering

Pillar stability has been a matter of study for the last 70 years. The determination of pillar strength had taken different solutions and approaches over that time. This research has led to numerous empirical formulations that have reduced the number of pillar failures worldwide. However, new numerical approaches are being studied. In the last 20 years, the Ground Reaction Curve concept has been examined as a way of understanding the convergence of the rock-mass. Although the Ground Reaction Curve was first introduced in the civil tunneling industry, several authors have introduced the Ground Reaction Curve concept as an approach for …

Investigation Of The Stability Of Liquid And Air Films By Synchronized Tri-Wavelength Reflection Interferometry Microscope, Yuesheng Gao

Dissertations, Master's Theses and Master's Reports

Liquid films are widely involved in many processes, such as froth flotation, oil extraction, foam/bubble stabilization, etc. In the meantime, air films are commonly seen in diverse fields like dust control, ink print, coating industry, and so on. Stabilities of these liquid/air films are of great importance to improve the processes. As more and more researchers are paying increasing attention to liquid/air films, tremendous efforts have been made to explore the properties of the films. On the one hand, some theoretical models have also been well developed in recent decades. State-of-the-art technologies, such as AFM, SFA, and RICM, have also …

A Novel Pixel-Based Multiple-Point Geostatistical Simulation Method For Stochastic Modeling Of Earth Resources, Adel Asadi

Dissertations, Master's Theses and Master's Reports

Uncertainty is an integral part of modeling Earth's resources and environmental processes. Geostatistical simulation technique is a well-established tool for uncertainty quantification of earth systems modeling. Multiple-point statistical (MPS) algorithms are specifically advantageous when dealing with the complexity and heterogeneity of geological data. MPS algorithms take advantage of using training images to mimic physical reality. This research presents a novel and efficient pixel-based multiple-point geostatistical simulation method for mineral resource modeling. Pixel-based simulation implies the sequential modeling of individual points on the simulation grid by borrowing spatial information from the training image and honoring conditioning data points. The developed method …

Evaluating The Effect Of Emulsion On Wax Deposition Prevention Of Oil From Fang Oil Field, Tanapol Ruengnam

Chulalongkorn University Theses and Dissertations (Chula ETD)

Due to the COVID-19 situation, the energy consumption demand right now declines. However, the trend predicted by EIA is that the demand will be fully recovered at the end of 2022. Thus, it is important to maintain the production without disruption from flow assurance issue. In addition, wax deposition is one of the important issues for flow assurance. To manage the wax deposition, there are 3 major methods which are mechanical, thermal and chemical methods. The chemical method can easily be utilized. For this study, wax deposition prevention is studied with chemical method. Also, the study is investigating the effect …

Copper And Gold In Vapors And Liquids As A Function Of Hcl At 700°C And 100 Mpa, Corrie A. Lucchesi

Graduate Research Theses & Dissertations

Porphyry ore deposits are major sources of copper (Cu) and gold (Au) and form when a magmatic volatile phase (MVP) exsolves from a porphyritic intermediate to felsic melt and transports metals to surrounding country rock where they precipitate in an ore zone. There is a consensus that the chloride concentration of the MVP has a direct relationship to the concentration of Cu and Au in the MVP, but the role of dissolved HCl on Cu and Au concentrations has not been addressed. It is hypothesized that increasing HCl concentrations in the MVP will result in higher concentrations of Cu and …

Modeling And Optimization Of Froth Flotation Of Low-Grade Phosphate Ores: Experiments And Machine Learning, Ashraf Alsafasfeh

Doctoral Dissertations

”In this research work, bench-scale and micro-scale flotation tests were conducted to separate “minerals from silicate minerals using direct and reverse flotation approaches, respectively. Experiments were conducted at different flotation conditions including reagents’ type, reagents’ dosages, pulp’s pH, and flotation time.

In the direct flotation process, two polymers were selected to promote the depression of silicates: hybrid polyacrylamide-based polymers (Hy-PAM) and chitosan. Results indicated that the highest recovery of P₂O₅ (86.82%) was obtained when the Hy-PAM polymer was used compared with 66.7% and 40% when chitosan and commercial inorganic depressant were used, respectively. The experimental datasets obtained …

Shock Wave Propagation Behavior At Corners And Crosscuts In Five Small-Scale Tunnel Scenarios, David Pierre Doucet

Masters Theses

"Shock wave propagation in tunnels and other enclosed environments is substantially more complicated than in an open-air or even a surface detonation. There is still much to learn about how shock wave properties change as a wave propagates in an enclosed space, such as a mine tunnel, inside of a building, or city street. The geometry of the enclosure will have a large role in the propagation of the shock wave. This means that many different tunnel designs must be studied. This work tested five different designs using a modular small-scale model. The scenarios tested were Straight-line, Single Turn, Around …

On The Investigation Of Hot Tearing Behavior Of Continuous Cast Steel, Yanru Lu

Masters Theses

”Hot tearing has long been recognized as a major problem that plagues the development of the continuous casting process and results in low-quality products. Understanding of the mechanisms and the required conditions for the hot tearing formation is important for industries but has not been well-established yet. Thus, this research focuses on the hot tearing issue observed in continuous cast steel, by providing a summary of the current research progress and then introducing a new laboratory method to determine the thermo-mechanical properties relevant to hot tearing of different steel grades under different solidification conditions. In this method, an apparatus was …

An Experimental Research On Cationic Reverse Flotation Of Anshan-Type Iron Ores, Zhonghang Chen, Dianbing Zhu, Shujuan Dai, Ahmed Sobhy

Mining Engineering Faculty Research & Creative Works

The mineral processing technology of Anshan-type iron ores has been developed in a rapid speed in recent years, and the combined flowsheet at the core of anionic reverse flotation has become a mainstream in the beneficiation of Anshan-type iron ores in China. With the successful application of this combined flowsheet, some obvious problems are also emerging. Such as high requirement of pulp temperature, complex reagent system, high cost of reagent consumption and so on. In view of this, we have carried out an experimental study on the separation of Anshan type iron ore by cationic reverse flotation. A new collector …

Role Of Ergonomics In The Selection Of Stemming Plugs For Surface Mining Operations, Atta Ur Rehman, Muhammad Zaka Emad, Muhammad Usman Khan

Mining Engineering Faculty Research & Creative Works

Stemming plugs are one of the widely used accessories in surface mining operations. Stemming plugs assist conventional stemming material in gas retention and help in better fragmentation and explosive utilization. Effective use of the stemming plugs results in economic benefits and enhance the efficacy of the project. Economic and productive viability of stemming plugs have been conducted in depth by different researchers. Addition of stemming plugs to a new system requires ergonomic challenges for operators conducting drilling and blasting operation. Induction of a newer product in already established system is subject to overall positive feedback. This work investigates ergonomics of …

Application Of Geophysics And Remote Sensing Techniques For Economic Mineral Exploitation In Libya, Awad Abdussalam Henish Lemnifi

Doctoral Dissertations

“This study investigates crustal thickness and properties within the north central Africa region. Results obtained from 15 seismic stations belonging to the Libyan Center for Remote Sensing and Space Science are reported, in addition to 3 seismic stations publically available, using receiver functions, the first P-to-S receiver function investigation of the 410 km and 660 km depth discontinuities bounding the mantle transition zone (MTZ), and P wave tomography methods. The results from the first method show crustal thicknesses ranging from 24 km to 36 km (with uncertainties ranging between ±0.10 km and ±0.90 km). More specifically, crustal thickness ranges from …

Environmental Impact Of The Mechanical Coal Processing Plant, Witold Bialy, Wes Grebski, Greg Galecki, Wojciech Kaniak

Mining Engineering Faculty Research & Creative Works

The enrichment of hard coal is one of the stages of mineral resources management. It is aimed at adapting its quality parameters to different recipients' requirements, considered as a stage of mineral resources management. This process is treated as a stage of clean coal technologies or as a process of improving the economics of mining plants, which takes place in the Mechanical Coal Processing Plant (ZMPW). Adaptation of the quality of commercial coal products to the needs of specific recipients consists of removing useless components of the excavated material. In this publication, factors having a negative impact on the environment …

An Interactive Mobile Equipment Task-Training With Virtual Reality, Lazar Zujovic

Graduate Theses, Dissertations, and Problem Reports (ETD)

Improving the quality of equipment training for the Heavy Equipment Operators (HEO) is a critical task in the ever-lasting effort to improve safety and eliminate equipment-related injuries in mining environments. Traditional miner training includes the use of hardcopy documents and video instructions. However, modern mobile and computer technology offers tremendous potential to improve the training process. One major responsibility for the heavy-machine operators is proper machine inspection. Establishing new training methods that utilize modern technologies—such as 360-degree images, videos, and Virtual Reality—and implementing computers for training purposes have a potential to help new operators learn how to conduct proper machine …

Adaptation Of Coal Mine Floor Rating (Cmfr) To Eastern U.S. Coal Mines, Sena Cicek

Graduate Theses, Dissertations, and Problem Reports (ETD)

Floor heave—the excessive deformation and failure of floor strata—is a serious problem for many underground coal mining operations in the U.S. There is an accepted floor heave design methodology developed for the Illinois basin coal mines (Gadde, 2009). However, for Eastern U.S. coal mines in the Appalachian region, there is not any systematic design method to assess floor heave potential. In order to prevent stability problems associated with floor failure and to ensure the safety of the miners in this region, a systematic and proactive method to assess the potential of floor stability that also takes the floor failure mechanisms …

Design And Development Of A Multi-Nodal Methane Detection System For Longwall Coal Mining, Amber P. Barr

Graduate Theses, Dissertations, and Problem Reports (ETD)

Methane (CH4) explosions pose significant dangers in longwall mining that may lead to injuries and fatalities. Safety is improved through diligent monitoring of CH4 concentration. Currently, regulations require a CH4 monitor be placed on the shearer, downwind of the cutting head. Portable monitor measurements must be taken at various times and locations. If any CH4 monitor measures a concentration greater than 1%, a warning signal must be given. Based on previous research and the location of the CH4 monitor mounted on the shearer (closest monitor to the face), if 1% methane is measured, the concentration at the face may be …

Additive Manufacturing Of Linear Shaped Charges To Address Run Up And Run Down Phenomena, Jason Ho

Masters Theses

”A shaped charge is an explosive device used to focus detonation energy in a desired direction. Additive Manufacturing (AM) can allow greater design freedom and geometric complexity for the liner portion of the shaped charge.

In this work, the following hypotheses were tested: 1) Adjusting the initial apex angle of a linear shaped charge liner reduces the amount of run up that occurs, and 2) implementing a backstop at the end of a linear shaped charge liner reduces the amount of run down that occurs.

Linear shaped charge liners with a continuously changing apex angle were created with additive manufacturing. …

The Influence Of Spatial Variance On Rock Strength And Mechanism Of Failure, Danqing Gao

Graduate Theses, Dissertations, and Problem Reports (ETD)

The heterogeneity in the rock formation affects both rock behavior and the strength. The effect of heterogeneity is observed both at the laboratory scale and at the rockmass level. The mechanical properties of intact rock vary considerably at laboratory scale and often an average value is used for design purposes. Similarly, the values are arbitrarily scaled when used at rockmass level. In underground coal mines, the effect of variability of properties is often observed with the erratic roof failure events that occur throughout the mine. The approach often was to use the deterministic values from limited site data to estimate …