Mining Engineering Commons^™

Moon Adaptive Technology For Extraterrestrial Architectural Robotics (Matear), Candela Noemi Solis Zampini

Theses and Dissertations

The Moon Adaptive Technology for Extraterrestrial Architectural Robotics (MATEAR) focuses on the development of an autonomous robotic system capable of providing structural building blocks directly from lunar regolith. As a sustained human presence on the Moon becomes a necessity, the costly and limited payload capacity associated with transporting construction goods from Earth creates a critical challenge. MATEAR addresses this problem through in-situ resource utilization (ISRU), integrating a regolith processing system onto a remote operated vehicle. The proposed system is designed to collect lunar dust, mechanically compact the material, and apply thermal treatment to enhance cohesion through sintering. These regolith-made bricks …

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar

Theses and Dissertations

Proppants are critical components in hydraulic fracturing, used to maintain fracture conductivity and enhance reservoir stimulation. In high-pressure and harsh reservoir environments, the use of high-strength proppants is essential to ensure well performance. Conventional proppants, being sand, ceramic, and sintered bauxite can be expensive, and their use often requires costly fracture fluids. This study investigates the possibility of utalizing fly ash geopolymers as a sustainable alternative that is also cost-effective for proppants manufacturing. Fly ash, a by-product from the combustion of coal and other materials, was explored as a base material for proppants, utilizing an alkaline solution as an activator …

Linking S‑Pillar Empirical Criteria With Boundary And Finite Element Models For Underground Stone Pillar Analysis, Benjamin Diddle

Theses and Dissertations--Mining Engineering

The objective of this thesis is to strengthen the relationship between empirically based stone pillar design methods and two numerical modeling techniques by calibrating boundary element and finite element models to the S‑Pillar empirical criteria and observed pillar behavior in underground stone mines. The first component of the research investigates the displacement‑discontinuity boundary element method implemented in LaModel, quantifying the influence of the lamination thickness and element size on stone pillar safety factor predictions. Results showed that optimal thickness depends on overburden modulus, while larger element sizes introduce significant SF differences from S-Pillar values once the grid size exceeds 5 …

Validation Of Final And Dynamic Subsidence Prediction Models Using The Influence Function Method, Carlos M. Hernandez Garcia

Theses and Dissertations--Mining Engineering

This study evaluates the Surface Deformation Prediction System (SDPS Version 7) for predicting final and dynamic subsidence in longwall mining. Using the influence function method, SDPS 7 was calibrated using data from the Quarto 7 Mine (Ohio, USA) and two panels in Anhui Province, China, to test the reliability of the method under varying geological and operational conditions, particularly low advance rates.

For the Quarto 7 Mine, monument line C provided the optimal set of subsidence parameters: SSF of 78%, tanβ of 2.97, edge‑effect offset of 160 ft, with an RMSE of 0.108 ft. These values aligned with estimates obtained …

Evaluation Of The Proclivity For Recovering Rare Earth Elements Via Heap Leaching Of Coal And Coal Byproducts, Dylan Connell

Theses and Dissertations--Mining Engineering

Rare earth elements (REEs) - 17 elements classified as light (LREE) or heavy (HREE) - underpin modern technology. This thesis presents the development, design, and testing of a heap leach pad (HLP) to extract REEs from Western KY No.13 seam coal refuse. Testing included resource estimation, column and heap leaching, and an economic feasibility study. Drillhole analyses identified average REE concentrations in two refuse piles of 286 ppm and 290 ppm. The resource base totaled approximately 7,085 metric tons of REOs. The HLP, constructed with 2,000 metric tons of coal refuse material, was tested continuously over 308 days. Fresh lixiviant …

Geometric Effects Of Warfighters On Body Armor Fit And Protective Capabilities Against Shock Wave Energy, Melissa Lynn Sutter

Doctoral Dissertations

Body armor is a vital piece of protective equipment for warfighters to defend against threats, necessitating continued development to improve comfort, weight, and protection. However, female warfighters often wear unisex body armor, designed primarily for the male torso. Current research has evaluated the short- and long-term detriments of female warfighters wearing these armors, focusing on comfort and performance. However, these studies do not comprehensively consider how a non-form-fitting armor compromises warfighter safety from battlefield threats. This research examines the geometric effects of female warfighters on armor protection level when defending against shock threats by evaluating the energy distribution on a …

Advancing Coal Rib Support Design Through The Integration Of Field Studies And Numerical Simulations, Alper Kirmaci

Doctoral Dissertations

Coal rib stability remains a major safety concern in U.S. underground coal mines, with rib failure-related injuries and fatalities still occurring. A key challenge is the lack of a standardized methodology for designing rib support systems that can address varying geological conditions. As a result, many mines rely on trial-and-error or traditional practices, leading to inconsistent designs. This research aims to develop a systematic methodology for rib support design to improve coal rib stability in U.S. mining operations.

The study consists of: i) field monitoring in active room-and-pillar coal mines, ii) in-situ pull-out tests on coal ribs, iii) numerical model …

Public Preferences And Trade-Offs In Critical Mineral Mining Development In The United States, Bamidele Joseph Ajiga

Masters Theses

Rising demand for battery-critical minerals has increased U.S. mining efforts, but projects often face public opposition. There is limited work on how individuals in affected regions evaluate trade-offs between economic and environmental risks.

This research applies a discrete choice experiment to examine individual preferences for proposed battery-critical minerals mining projects in Missouri, Minnesota, and Idaho. 1908 respondents evaluated hypothetical mining projects defined by jobs, state tax revenue, the proportion of tailings reprocessed, groundwater impacts, and surface water impacts, under gold and silver versus battery-critical mineral framings.

Conditional and mixed logit models were used to assess the importance of attributes, demographic …

Environmental Regulations And The Exploitation Of Deep Seabed Minerals : A New Era For The“Mining Code” Of The International Seabed Authority (Isa)?, Mikyla D'Antoinette Frederick-Winter

World Maritime University Dissertations

No abstract provided.

A Proposed Metals Recovery Assessment Protocol To Evaluate Mine Waste For Critical Minerals And Rare Earth Recovery Prior To Site Remediation, Claire Mbia

Graduate Theses & Non-Theses

The Metals Recovery Assessment (MRA) protocol involves collecting and evaluating information to assess the possibility for recovery of critical or rare earth minerals at mine sites to offset remediation or redevelopment costs associated with land reuse at Superfund or closed mine sites. This protocol provides a tool to implement metals recovery in conjunction with property reuse, and may involve a review of available records, visual inspections of the site, sample collection and discussions with local government officials and community members. The selection for metals recovery would be intended to both achieve metals reduction which may be required for the protection …

Enhanced Separation Performance For Fractionally Liberated Materials Using The Hydrofloat™ Process Technology, Yucel Ozsoy

Theses and Dissertations--Mining Engineering

The advent of HydroFloat™ technology, developed by Eriez Manufacturing, marks a significant milestone in the evolution of the mineral processing industry, particularly for the coarse particle flotation by shifting the limits, well-known as the “Elephant Curve.” As the industry strives to process lower-grade ores with higher tonnages for financial reasons, the significance of processing coarse particles through HydroFloat™ technology becomes increasingly critical.

This approach offers substantial benefits by potentially reducing energy consumption within grinding circuits, making it a key solution in enhancing efficiency and cost-effectiveness. This study presents a comprehensive review of the existing literature, laying a solid foundation by …

Image Processing And Machine Learning Using Lidar And 360 Camera In Underground Mines, Ana Fabiola Patricia Tejada Peralta

Theses and Dissertations--Mining Engineering

Underground mining environments present several safety challenges due to low visibility, poor lighting, and the absence of GPS coverage. These factors hinder situational awareness and delay hazard detection, particularly during post-disaster conditions. This research introduces an integrated framework that combines image processing and machine learning techniques applied to 360-degree camera and LiDAR data to enable automated object detection and remote monitoring in underground mines.

The study was divided into two main stages: 2D object detection and 3D object detection. The 2D component employed images captured with a Ricoh Theta Z1 360° camera and utilized YOLO-based deep learning models for object …

Experimental Investigation Of Surfactant Impact On Surfactant-Oil-Brine System For Surfactant Enhanced Oil Recovery, Chananpat Worpattanaluk

Chulalongkorn University Theses and Dissertations (Chula ETD)

Enhanced Oil Recovery (EOR) is a vital technique for improving hydrocarbon extraction efficiency from mature or low-production reservoirs. Among various EOR methods, chemical flooding, particularly surfactant-based EOR, has gained attention due to its ability to reduce interfacial tension (IFT), to alter rock wettability, and to mobilize trapped oil. However, the performance of surfactant systems is highly sensitive to reservoir salinity, temperature, and rock-fluid interactions, leading to surfactant precipitation, adsorption losses, and interfacial tension reduction. Therefore, understanding the effects of salinity, surfactant concentration, and the role of scale inhibitors on the physicochemical stability of surfactant-oil-brine systems is essential for designing robust …

Evaluating Co2 Storage Criteria : Focusing On Thailand's Petroleum Basins For Carbon Storage, Paul Tivere Benjamin

Chulalongkorn University Theses and Dissertations (Chula ETD)

Anthropogenic carbon dioxide (CO2) emissions from large point sources remain central to Thailand’s climate challenge, and geological carbon capture and storage (CCS) is now included in national mitigation plans. However, Thailand still lacks a transparent way to compare candidate saline aquifers and petroleum basins in terms of storage performance, containment, and socio-economic conditions, while allowing for uneven data quality. This thesis develops a Thailand-specific, two-stage framework that combines threshold-based screening with a multi-criteria ranking framework based on the Analytic Hierarchy Process (AHP) and Data Confidence Scores (DCS). Twenty-one criteria in three groups (capacity and injectivity, containment, and socio-economic constraints) were …

Simulation On Hydrogen Production From Mae-Moh Lignite Coal Gasification, Pitatchai Arunwong

Chulalongkorn University Theses and Dissertations (Chula ETD)

Hydrogen energy has attracted significant attention due to its cleanliness, efficiency, and sustainability. Gasification is considered one of the most promising thermochemical routes to convert coal into high-quality syngas, which can subsequently be utilized for hydrogen production. Mae-Moh lignite, a low-rank coal with low carbon content and high moisture and volatile matter, is selected as the feedstock for this study. This research aims to develop a comprehensive simulation model of a hydrogen production process, integrating gasification, water-gas shift (WGS), acid gas removal, and hydrogen purification using the software simulator. The model predicts hydrogen product gas composition from Mae-Moh lignite under …

Collision Avoidance Information System Utilizing Machine Learning Image Recognition, Michael W. Long

Theses and Dissertations--Mining Engineering

This thesis addresses significant safety challenges presented by powered haulage fatalities in underground mining by developing and evaluating a machine learning-driven Collision Avoidance Information System (CAIS). The research utilized a ZED 2i camera to capture both RGB and depth data for enhanced spatial awareness in visually limited underground environments. A specialized dataset of underground mining equipment was captured from limestone and zinc mines, annotated, and used to train a segmentation network. The CAIS was field-tested in diverse underground settings, achieving an accuracy of 82% in a limestone mine similar to the training data, but a lower accuracy of 45% in …

The Dynamic Material Response Of Csa Cement Using A Split Hopkinson Bar, Elliott L. Morgan

Theses and Dissertations--Mining Engineering

The University of Kentucky Center for Applied Energy Research (CAER) Cementitious Materials Group is developing a pourable Calcium Sulphoaluminate (CSA) cement-based concrete for rapid repair applications. Due to dynamic events like vehicle strikes, ballistic events, or other dynamic loading events, the dynamic material characteristics are important for understanding how the material will respond. A large diameter Split Hopkinson Pressure Bar (SHPB) was used to test samples of the pourable CSA cement and determine its dynamic material properties in the early strength development phase. 24 samples were tested in 7 day intervals for 28 days. Samples were prepared targeting a length …

Temporal Machine Learning For Predicting Accidents And Violations In The Mining Industry, Nathan T. Kelley

Theses and Dissertations--Mining Engineering

This thesis examines the predictive capability of a temporal machine learning model for forecasting future accidents and violations at individual mines, based on historical data. Mine accidents were categorized by accident classification and violations were categorized by the Part Section. The primary datasets utilized were the mine safety and health administration’s (MSHA’s) Accident Injuries and Violations datasets. The available datasets were cleaned and organized by mine type and commodity, then divided into separate subsets for training, validating, and testing. Different models, cutoff metrics, learning rates, number of hidden layers, data processing methods, data processing divisions, number of points observed …

An Autonomous Robotic Inspection System For Underground Mines Using Unmanned Aerial Vehicles (Uavs), Kiazoa M. Joao

Theses and Dissertations--Mining Engineering

Underground mining environments pose unique safety challenges for workers due to poor visibility, unstable ground conditions, and the absence of GPS signals. To adhere to safety and health standards, underground mines are required to perform safety inspections regularly. Conventional safety inspections require personnel to enter the hazardous environment, highlighting the need for a safer, remote alternative. The use of UAVs for safety inspection in underground mines is a somewhat novel idea but has shown great promise. While Unmanned Aerial Vehicles (UAVs) cannot eliminate all hazards associated with mining, they provide critical support by accessing hazardous or restricted zones that are …

Analysis Of Dynamic And Final Surface Subsidence Movements Over Subcritical Panels In The Eastern Us, Mauricio Parra Valencia Sr

Theses and Dissertations--Mining Engineering

Subsidence prediction is a critical field in mining engineering, focusing on anticipating ground movements caused by underground coal extraction. Accurately forecasting these movements is essential for protecting surface structures and infrastructure from damage. However, despite extensive research by mining professionals worldwide, reliable prediction remains challenging, especially in complex environments like subcritical mining areas and locations characterized by highly variable topography. These conditions introduce non-linear rock mechanics that often complicate the application of traditional predictive models. This thesis utilizes measured subsidence data related to the extraction of two adjacent longwall panels in a deep coal mine in the eastern US to …

Selective Recovery Of Critical Minerals (Ni, Zn, Co, And Mn) From Acid Mine Drainage Utilizing Ion Exchange And Selective Precipitation Processes, Esteban Albeiro Cardenas Restrepo

Graduate Theses, Dissertations, and Problem Reports (ETD)

Critical minerals (CMs) are essential for U.S. national security and technological development. The U.S. heavily depends on imports of these minerals from other countries, making supply chain disruptions a likely scenario. In consequence, finding alternative sources to conventional mining for these elements has become a topic of interest in recent years. Acid Mine Drainage (AMD), once solely viewed as an environmental problem, has emerged as a potential alternative source for CMs. AMD is a naturally occurring process where surface and underground water interact with sulfur-bearing minerals in the presence of oxygen and microorganisms. This interaction causes the water to become …

Life Cycle Assessment And Techno-Economic Analysis Of Mine Tailings As A Sustainable Raw Material For Mineral Carbonation And Recovery Of Critical Minerals, Vida Amankwaa

Dissertations, Master's Theses and Master's Reports

This study assesses the feasibility of using mine tailings for mineral carbonation and nickel recovery through a comprehensive Life Cycle Assessment (LCA) and Techno-Economic Analysis (TEA). The LCA quantifies greenhouse gas emissions, energy use, and resource consumption, while the TEA evaluates capital investment, operational costs, and process efficiency. The conventional beneficiation process at Eagle Mine serves as a baseline, highlighting its environmental footprint and operational costs. Results indicate that tailings reprocessing incurs higher costs ($34.76 per tonne of tailings processed) compared to conventional ore processing ($25.90 per tonne) due to increased energy consumption and material handling requirements. Additionally, several mineral …

Iron Ore Tailings Reprocessing By Electrostatic Separation Plus Two Stages Froth Flotation, Vincent Bailey Arohunmolase

Dissertations, Master's Theses and Master's Reports

The reprocessing of tailings is crucial for recovering valuable iron and reducing the environmental impact associated with tailings disposal. This study investigates the practicality of reprocessing tailings to enhance iron oxide content, combining electrostatic separation with a two-stage froth flotation process using oleic acid (direct flotation) and amine (reverse flotation). The primary goal is to efficiently recover valuable iron from tailings, thereby reducing waste and promoting sustainable resource utilization. The process aims to upgrade the iron oxide content to around 93-99% Fe₂O₃, making the recovered material suitable for the production of direct-reduced iron.

Electrostatic separation was …

Radio Frequency Wave Propagation Modeling Within Obstructed Underground Mining Environments For Effective Miner Localization During Mine Emergencies, Emmanuel Atta Antwi

Doctoral Dissertations

The reliability of underground wireless communication systems remains a significant challenge, particularly during emergencies when the mine environment becomes severely obstructed by debris, dust, and humidity. These environmental and geometric conditions result in significant attenuation of electromagnetic (EM) waves and multipath effects that undermine miner localization and rescue operations. Existing Vector Parabolic Equation (VPE) models are efficient for straight or mildly curved tunnels but fail to account for the random and obstructive conditions typically encountered during underground emergencies. This research develops a novel radio propagation model for EM wave behavior in underground mine drifts under geometrically obstructed conditions. The model …

Applying Human System Integration Principles To The Investigation, Design And Validation Of Interventions For Self-Escape In Underground Mines, Eugene Adubofour Gyawu

Doctoral Dissertations

This dissertation investigates the use of human systems integration (HSI) to develop technologies for miners’ self-escape during a mine emergency, addressing barriers that compromise miner safety during emergencies.

Recognizing the inherently hazardous nature of underground mining, this study has three core objectives: (1) assessing miners' perceptions of proposed self-escape interventions, (2) designing interventions based on these insights, and (3) validating their effectiveness using experimental testing. This work evaluates self-escape interventions for both coal and metal/non-metal miners using scenario-based surveys, information design reviews, label designs and experimental testing methods varying across three distinct studies.

Results reveal that miners identified improvements to …

Mid-Field Shock And Impulse Estimation Methods For Blast Loading On Tall Targets, Ethan Allan Steward

Doctoral Dissertations

Blast resistant structural design continues to be a major research area for governments around the world due to explosive threats from both state and non-state actors. Many of the typical targets of explosive attacks, such as government buildings, commercial high rise office buildings, and apartment complexes are mid to high-occupancy buildings that present a tall profile relative to the charge size and are often clad in curtain walls. In blast resistant structural design, the origin of a shock wave is typically assumed to be in the far-field, creating a wave that is nearly planar and parallel to at least one …

Shock Wave And Vortex Ring Dynamics From Explosively Driven Shock Tunnels, Rachel Louise Bauer

Doctoral Dissertations

"Blast and shock tubes are frequently used to create shock waves to study their effects and impacts on structures, humans, and personal protective equipment. These tubes are also found in other industries including wind tunnels for aerodynamic testing, jet engines for propulsion research, spacecraft reentry simulations, and industrial applications such as material testing and high-velocity impact studies. Despite their widespread use, there is no standard design, with variations in geometry, size, and energy sources. Current research only evaluates the peak pressure of the shock wave produced and does not consider the effects of changing the size or geometry of the …

Advancing Refuge Alternatives In Mine Emergencies Using Advanced Numerical Simulation, Kutay Emre Karadeniz

Doctoral Dissertations

"Incidents and emergencies within underground coal mines can result in severe injuries or even loss of life, particularly due to the hazardous nature of mine explosions. One of the options for the miners to protect themselves from these hazards is to be sheltered in a refuge alternative (RA). However, the literature lacks an analysis of survivability constraints and the structural integrity of RAs when exposed to geomechanical changes and the ability to withstand the impact of coal mine explosions. In this study, based on the utilization and survivability constraints, basic human requirements and the required physical specifications of RAs during …

Investigation Of Shockwave Behavior To Inform Helmet Design Using Schlieren Imagery And Free-Field Blasts, Cody Jh Thomas

Doctoral Dissertations

"Ballistic resistance of military helmet designs is a prioritized feature to protect warfighters from traumatic brain injury. However, injuries from shock-based threats have not been optimized for warfighter protection and have resulted in the prevalence of blast-induced traumatic brain injury (bTBI). Research gaps were identified in understanding the under wash effect using free field blasts and schlieren imagery. Thus, the following were investigated: (1) overpressure changes on a warfighter’s head due to directionality from a blast, (2) shock wave dampening effects of viscoelastic materials in helmets, and (3) geometric effects of a helmet brim design in the reduction of bTBI. …

Development Of A Method To Measure Blast Overpressure Exposure Using Orthogonal Sensor Orientations, Nicholas Kuehl

Masters Theses

Measuring and recording blast exposure to military personnel from shoulder-fired weaponry or improvised explosive devices to correlate health outcomes like mild traumatic brain injury has been a goal for many years. As such, many wearable sensors have been developed and tested for accuracy and reliability. Despite this, knowing the sensor orientation in relation to the blast source is important to fully correlate the actual personnel exposure to clinical outcomes. This research investigates whether pressures recorded at three independent orientations in the x, y and z planes can be combined to a representative pressure that is independent of orientation. Important metrics …