Open Access. Powered by Scholars. Published by Universities.®

Mining Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Mining Engineering Faculty Research & Creative Works

Articles 1 - 30 of 317

Full-Text Articles in Mining Engineering

Long Range Battery-Free Wireless Power Transfer Testbed For Underground Mines Iot And Lpwan Devices, Anabi Hilary Kelechi, Samuel Frimpong, Sanjay Madria Dec 2026

Long Range Battery-Free Wireless Power Transfer Testbed For Underground Mines Iot And Lpwan Devices, Anabi Hilary Kelechi, Samuel Frimpong, Sanjay Madria

Mining Engineering Faculty Research & Creative Works

Underground mines are susceptible to occasional roof falls and cave-ins, temporarily destroying the existing wireless communications and telemetry infrastructure. During this temporary outage, intermittent provision of electrical energy wirelessly to the already deployed low-power wireless area networks (LPWAN) and Internet of Things (IoT) devices assumes a fundamental requirement. In this article, we propose and design a long-range far-field radio frequency (RF) wireless power transfer (WPT) testbed to power LPWAN and IoT devices at 35 m in an underground mines facility. Class AB external power amplifier (PA) was introduced to achieve a long-distance RF WPT, in the 880 MHz band. Thus, …

Go to article

A Review Of Gallium And Germanium Recovery From Industrial Solid Residues, Ernest V. Oteng, Marthias Silwamba, Lana Alagha, Alex Luyima Nov 2026

A Review Of Gallium And Germanium Recovery From Industrial Solid Residues, Ernest V. Oteng, Marthias Silwamba, Lana Alagha, Alex Luyima

Mining Engineering Faculty Research & Creative Works

The global demand for critical elements such as gallium (Ga) and germanium (Ge), and the shift toward circular mining has accelerated the development of new extraction and recovery processing these metals from industrial solid residues. This transition is driven by a substantial surge in demand for advanced technologies and the depletion of primary ore. Consequently, industrial solid residues, particularly zinc processing residues, smelter slags, flue dusts, and coal fly ash, are emerging as viable alternative sources. These residues incorporate Ga and Ge through isomorphic substitution in phases such as ferrites, silicates, and glassy aluminosilicates, and are enriched by industrial processes, …

Go to article

Msmgoptimizer: An Open-Source R Package And Web Application For Streamlining Life Cycle Inventory Data Automation In Life Cycle Assessment, Philip Duah, Kwame Awuah-Offei Sep 2026

Msmgoptimizer: An Open-Source R Package And Web Application For Streamlining Life Cycle Inventory Data Automation In Life Cycle Assessment, Philip Duah, Kwame Awuah-Offei

Mining Engineering Faculty Research & Creative Works

Life Cycle Inventory (LCI) compilation is indispensable in any Life Cycle Assessment (LCA) study, yet the preparation of inventory data for import into LCA software remains one of the most time‑consuming and error‑prone steps in the LCA workflow. LCI datasets frequently originate from multiple data sources and formats, necessitating automation tools that can optimize inventory data for direct use in LCA modeling platforms. SimaPro, the world's leading LCA modeling platform, for example, requires inventory data to be structured according to a proprietary CSV specification that is labour-intensive to prepare manually. Existing tools remain largely inaccessible to most researchers due to …

Go to article

Review: Advancements In Fibrous Aerosol Filtration Across Experimental Analysis, Numerical Modeling, And Fabrication Technologies, Mirza Muhammad Zaid, Ashish Ranjan Kumar, Ashish Kakoria, Lina Zheng, Guang Xu Sep 2026

Review: Advancements In Fibrous Aerosol Filtration Across Experimental Analysis, Numerical Modeling, And Fabrication Technologies, Mirza Muhammad Zaid, Ashish Ranjan Kumar, Ashish Kakoria, Lina Zheng, Guang Xu

Mining Engineering Faculty Research & Creative Works

The increasing incidence of aerosol-related pulmonary diseases has intensified the need for efficient fibrous filtration technologies capable of capturing ultrafine particles with low pressure drop. Although nonwoven fibrous filters are widely used in medical, industrial, and ventilation systems, their complex internal structures and multiscale transport mechanisms remain insufficiently understood. This review examines the theoretical foundations of aerosol filtration, including single-fiber capture mechanisms and the concept of the most penetrating particle size. In addition, electrostatic interactions, including charge generation, transport, and stability, are incorporated to extend conventional mechanical filtration frameworks. Particular attention is given to flow–particle interactions within fibrous media. We …

Go to article

Benchmarking Zero-Shot Open-Vocabulary And Fine-Tuned Object Detectors For Underground Mine Personnel Detection, Ellen Essien, Samuel Frimpong Sep 2026

Benchmarking Zero-Shot Open-Vocabulary And Fine-Tuned Object Detectors For Underground Mine Personnel Detection, Ellen Essien, Samuel Frimpong

Mining Engineering Faculty Research & Creative Works

Reliable personnel detection is critical for the safe deployment of autonomous haulage systems in underground mining, where challenging environmental conditions demand robust real-time perception. Existing research has focused primarily on fine-tuned convolutional detectors, while systematic comparisons with zero-shot vision-language models remain limited. This study presents a cross-paradigm benchmark comparing four zero-shot vision-language models (YOLO-World, Grounding DINO, OWL-ViT, and OWLv2) with four fine-tuned YOLO detectors (YOLOv8s, YOLOv9s, YOLO11s, and YOLO26s) using 31,396 real-world underground coal mine images. Detection performance was evaluated using precision, recall, F1-score, average precision, inference speed, and condition- and target scale-specific recall. The experimental results show that the …

Go to article

Automated Haulage Trucks: Impact On Workplace Safety And Efficiency In Surface Mining Systems, Samuel Frimpong, Mabel Obosu Sep 2026

Automated Haulage Trucks: Impact On Workplace Safety And Efficiency In Surface Mining Systems, Samuel Frimpong, Mabel Obosu

Mining Engineering Faculty Research & Creative Works

The mining industry continues to face significant safety challenges, particularly with powered haulage equipment (PHE). PHE incidents account for a substantial percentage of mining-related fatalities, often resulting from vehicle collisions, equipment rollovers, operator errors, and blind-spot hazards. Despite the industry's efforts to improve safety protocols, fatal accidents involving haulage trucks remain persistent. The mining industry has increasingly adopted automation to enhance operational efficiency and improve safety, particularly in surface mines where haulage truck accidents remain a critical concern. Automation has significantly reduced human exposure to hazardous tasks by removing operators from dangerous environments, thereby mitigating risks associated with human error …

Go to article

Geometric And Operational Design Principles For Autonomous Haulage Systems In Open-Pit Mining: A Systematic Review, Justina Senam Lotsu, Samuel Frimpong, Muhammad Azeem Raza Sep 2026

Geometric And Operational Design Principles For Autonomous Haulage Systems In Open-Pit Mining: A Systematic Review, Justina Senam Lotsu, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

The rapid deployment of autonomous haulage systems (AHSs) in open-pit mining has significantly altered haul road geometric design requirements, as autonomous trucks operate under strict kinematic constraints related to turning radius, gradient, and braking performance. Since haulage accounts for 50–60% of total mining costs, optimizing haul road geometry is critical for improving operational efficiency, energy consumption, and safety. This study presents a systematic review of 50 highly relevant studies selected from 81 candidate publications published between 2003 and 2025 through structured database searches and citation chaining. The review synthesizes current developments in haul road layout optimization, turning radius accommodation, gradient …

Go to article

Underground Mine Tunnel Fire Dynamics: Experimental Investigation And Ai-Driven Characterization Of Flame Behavior, Jingmin Xu, Rui Tian, Ashish Kakoria, Aamir Iqbal, Tao Yang, Lina Zheng, Guang Xu Aug 2026

Underground Mine Tunnel Fire Dynamics: Experimental Investigation And Ai-Driven Characterization Of Flame Behavior, Jingmin Xu, Rui Tian, Ashish Kakoria, Aamir Iqbal, Tao Yang, Lina Zheng, Guang Xu

Mining Engineering Faculty Research & Creative Works

Underground mine tunnel fires pose serious threats to personnel safety and infrastructure integrity, yet their detection and characterization remain challenging due to complex ventilation environments and limited visibility. This study combines full-scale fire experiments with advanced computer vision analysis to investigate the influence of fire size and ventilation on thermal, chemical, and visual signatures of mine fires. Six full-scall controlled experiments were conducted using two fire pan sizes under three ventilation conditions. Fuel mass loss, temperature distribution, and gas concentrations were systematically recorded using thermocouples, gas sensors, and visual/thermal imaging. Results show that mass loss rate is primarily governed by …

Go to article

Synthesis Of Bea Zeolite From Coal Fly Ash Nano-Silica Extract: Application In Co2 Adsorption, Alechine E. Ameh, Shabnam Feyziyeva, Jean Luc Mukaba, Keagan Pokpas, Baylar Zarbaliyev, Ojo O. Fatoba, Benoit Louis, Leslie F. Petrik, Oluwaseun O. Oyekola Aug 2026

Synthesis Of Bea Zeolite From Coal Fly Ash Nano-Silica Extract: Application In Co2 Adsorption, Alechine E. Ameh, Shabnam Feyziyeva, Jean Luc Mukaba, Keagan Pokpas, Baylar Zarbaliyev, Ojo O. Fatoba, Benoit Louis, Leslie F. Petrik, Oluwaseun O. Oyekola

Mining Engineering Faculty Research & Creative Works

This study demonstrates a circular economy approach to carbon dioxide sorption by re-purposing coal fly ash (CFA) into BEA zeolite using CFA-derived nano-silica and aluminum precursors via hydrothermal synthesis. The XRD patterns, with characteristic peaks at 15° and 37° 2θ, and SEM images both confirmed the complete transformation of the spherical-shaped CFA particles into amorphous nano-silica materials with particle sizes less than 100 nm. The absence of amorphous phases and the formation of high-intensity peaks at 7.8° and 22.8° 2θ further indicated the production of a highly crystalline BEA zeolite, obtained after hydrothermal synthesis durations between 10 and 72 h. …

Go to article

Fundamental Surface Chemistry And Mechanistic Insights Into The Flotation Of Tellurium-Bearing Pyrite From Sulfide Tailings, Mulenga Chibesa, Fardis Nakhaei, Lana Alagha Jul 2026

Fundamental Surface Chemistry And Mechanistic Insights Into The Flotation Of Tellurium-Bearing Pyrite From Sulfide Tailings, Mulenga Chibesa, Fardis Nakhaei, Lana Alagha

Mining Engineering Faculty Research & Creative Works

Tellurium (Te), a critical element for photovoltaic technologies, commonly occurs as a trace constituent in pyrite, which is typically depressed during copper porphyry flotation process and discarded to tailings. Selective flotation of pyrite offers a promising route to enhance Te production within the copper supply chain, although its recovery is often limited by surface oxidation and hydrophilic passivation. This study establishes a mechanistic framework to improve flotation of Te-bearing pyrite from copper sulfide tailings. Micro flotation tests designed using Box–Behnken response surface methodology revealed significant nonlinear and synergistic effects of pH, potassium amyl xanthate (PAX), methyl isobutyl carbinol (MIBC), and …

Go to article

Comparative Lca Of Germanium Production From Coal Fly Ash Using Chlorinated Distillation And Solvent Extraction, Dennis Dadzie, Kwame Awuah-Offei, Michael Moats, Nasib Al Habib, Weston Hartzell Jul 2026

Comparative Lca Of Germanium Production From Coal Fly Ash Using Chlorinated Distillation And Solvent Extraction, Dennis Dadzie, Kwame Awuah-Offei, Michael Moats, Nasib Al Habib, Weston Hartzell

Mining Engineering Faculty Research & Creative Works

Germanium is increasingly important for high-tech applications, yet its supply chain is vulnerable, with production limited to a few countries. Although prior research has explored alternative techniques for extracting and recovering germanium, the literature lacks comparative life-cycle evidence that quantifies their environmental burdens and translates findings into actionable (policy) recommendations. This paper presents a cradle-to-gate life-cycle assessment that compares the environmental burdens of producing 1 kg of single-crystal germanium from coal fly ash via chlorinated distillation (CD) and solvent extraction (SX). Under the study's assumptions, CD has lower potential impacts in 15 of 19 impact categories, while both routes show …

Go to article

Vehicle Autonomy To Ecosystem Intelligence: A Systematic Review Of Dynamic Vision Architectures In Surface Mining Operations, Nana Yaa Damtewaa Anti, Samuel Frimpong, Muhammad Azeem Raza Jul 2026

Vehicle Autonomy To Ecosystem Intelligence: A Systematic Review Of Dynamic Vision Architectures In Surface Mining Operations, Nana Yaa Damtewaa Anti, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

Autonomous Haulage Systems (AHS) have significantly transformed surface mining operations by improving safety, productivity, and operational consistency. Currently, AHS predominantly rely on vehicle-centric perception architectures. Onboard LiDAR, radar, cameras, and Global Navigation Satellite Systems (GNSS) perform sensing, interpretation, and decision-making within individual systems. These processes enable collision avoidance and path tracking. However, they are limited in their ability to consider the broader, dynamic mining environment characterized by dust, terrain degradation, geotechnical instability, heterogeneous traffic, and rapidly evolving operational conditions. This paper presents a systematic review of dynamic vision systems of AHS in surface mining. It critically analyzes the transition from …

Go to article

Public Preferences For Critical Mineral Mining In The U.S.: Evidence From A Discrete Choice Experiment, Bamidele Ajiga, Kwame Awuah-Offei, Mahelet G. Fikru Jun 2026

Public Preferences For Critical Mineral Mining In The U.S.: Evidence From A Discrete Choice Experiment, Bamidele Ajiga, Kwame Awuah-Offei, Mahelet G. Fikru

Mining Engineering Faculty Research & Creative Works

Even though there is widespread recognition that we need to mine more critical minerals for national security and energy needs, concerns about environmental impacts often lead to public opposition to proposed new mining projects. The literature lacks sufficient data from communities with proposed mineral projects to assess drivers of differences in support. This study investigates public preferences for mining projects in three states in the United States with proposed critical minerals projects, using a discrete choice experiment. Respondents evaluated projects that vary in job creation, state tax revenue, tailings reprocessing content, groundwater impacts, and surface water impacts. We also randomly …

Go to article

Effect Of Allocation And Allocation Avoidance Methods On Life-Cycle Impact Results For Tellurium Production From Copper Anode Slimes, Ioanna Paschalidou, Kwame Awuah-Offei, Michael Moats Jun 2026

Effect Of Allocation And Allocation Avoidance Methods On Life-Cycle Impact Results For Tellurium Production From Copper Anode Slimes, Ioanna Paschalidou, Kwame Awuah-Offei, Michael Moats

Mining Engineering Faculty Research & Creative Works

The global transition toward green energy has increased demand for metals and intensified the need for sustainable supply sources. Tellurium (Te), an essential metal for photovoltaics technology, is produced primarily as a by-product of copper refinery slimes treatment. This study conducts a life-cycle assessment (LCA) study of Te production to investigate the effect of environmental impact allocation choices on LCA results in multi-product metal systems. A cradle-to-gate LCA model of the Te product system was developed in SimaPro v9.5.0.1 software by combining industrial data, Ecoinvent v3.7.1 datasets, and literature information. Environmental impacts were quantified using the ReCiPe v1.04 Midpoint method …

Go to article

Low-Cost Path-Loss Characterization For Underground Mine Tunnels Using Lora Transceivers At 915 Mhz, Hilary Kelechi Anabi, Samuel Frimpong, Muhammad Azeem Raza Jun 2026

Low-Cost Path-Loss Characterization For Underground Mine Tunnels Using Lora Transceivers At 915 Mhz, Hilary Kelechi Anabi, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

Accurate path-loss models are essential for planning reliable wireless networks in underground mines, yet existing characterization studies rely on specialized channel sounders and vector network analyzers costing tens of thousands of dollars, placing them beyond the reach of most mine operators. This paper demonstrates that LoRa transceivers costing approximately US $15 per node can serve as a self-contained path-loss measurement instrument, logging the received signal strength indicator (RSSI) and signal-to-noise ratio (SNR) directly to a CSV file over a standard USB serial connection. A measurement campaign conducted at the Missouri S&T Experimental Mine on 31 March 2026 collected 4801 packets …

Go to article

Nanobubble Flotation Strategy Of Fluorite Integrating Experimental And Dft Analysis, Ahmed Sobhy, Hadeer El-Shamy, Nourhan Ahmed, Mohsen Farahat Jun 2026

Nanobubble Flotation Strategy Of Fluorite Integrating Experimental And Dft Analysis, Ahmed Sobhy, Hadeer El-Shamy, Nourhan Ahmed, Mohsen Farahat

Mining Engineering Faculty Research & Creative Works

The conventional froth flotation of fluorite from quartz-rich ores is reagent-intensive and faces selectivity challenges, impacting its economic and environmental sustainability. This study presents a novel green intensification strategy through the synergistic integration of nanobubble (NB) technology with Density Functional Theory (DFT) simulations. Systematic optimization of sodium oleate (collector) and sodium silicate (depressant) dosages in conjunction with hydrodynamic parameters (air/wash water velocity, NB generation rate) was conducted in both mechanical and column flotation systems. The incorporation of nanobubbles yielded transformative improvements: in mechanical flotation, collector and depressant consumption were reduced by over 50% while maintaining a concentrate grade exceeding 90% …

Go to article

Exploiting Underground Mine Topology For Resilient Concurrent Lora Mesh Emergency Communications: Architecture, Protocol Design, And Performance Analysis, Hilary Kelechi Anabi, Samuel Frimpong, Muhammad Azeem Raza Jun 2026

Exploiting Underground Mine Topology For Resilient Concurrent Lora Mesh Emergency Communications: Architecture, Protocol Design, And Performance Analysis, Hilary Kelechi Anabi, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

Underground mine emergencies compromise fixed communication infrastructure exactly when situational awareness is most critical for effective rescue operations. Existing LoRa mesh protocols fail in underground mines because they ignore the structured topology of tunnel networks, specifically the waveguide effect along straight galleries, severe signal discontinuity at junctions, and the dead-end geometry of working faces. This paper presents the Topology-Aware Concurrent LoRa (TACL) mesh protocol, in which each node autonomously infers its structural role from local RF observations and packet header information, without GPS, pre-loaded mine maps, or central coordination. Role classification resolves the contender estimation problem (Formula presented.) left open …

Go to article

Review Of Recovery Processes Of Palladium, Platinum, Gold, And Silver From Metallurgical Wastes, Luis Sanchez-Calderon, Marthias Silwamba, Lana Alagha Jun 2026

Review Of Recovery Processes Of Palladium, Platinum, Gold, And Silver From Metallurgical Wastes, Luis Sanchez-Calderon, Marthias Silwamba, Lana Alagha

Mining Engineering Faculty Research & Creative Works

Gold (Au), silver (Ag), platinum (Pt), and palladium (Pd) are precious metals with high economic value and critical industrial significance. Platinum and Pd, in particular, are classified as critical metals by major economies such as the United States, European Union, Japan, and South Korea due to their limited supply and essential roles in clean energy and high-technology applications. The rising market value and criticality of these metals have generated interest in their recovery, not just from primary ores and traditional source materials but also from secondary sources, such as metallurgical wastes. This review provides a thorough evaluation of current and …

Go to article

Mechanism-Based Assessment Of Respirable Dust Exposure In Miners: Integrating Cfd-Dpm Simulation With Personalized Monitoring For Occupational Health Risk, Jiajun An, Fan Geng, Yuqing Feng, Changgeng Gui, Shihang Li, Xinjian He, Guang Xu, Zheng Zhang, Yibao Wang Jun 2026

Mechanism-Based Assessment Of Respirable Dust Exposure In Miners: Integrating Cfd-Dpm Simulation With Personalized Monitoring For Occupational Health Risk, Jiajun An, Fan Geng, Yuqing Feng, Changgeng Gui, Shihang Li, Xinjian He, Guang Xu, Zheng Zhang, Yibao Wang

Mining Engineering Faculty Research & Creative Works

Respirable dust in confined mine environments represents a significant environmental and occupational health challenge, requiring advanced monitoring and risk assessment methodologies. Current area-level monitoring overlooks the heterogeneity of personal exposure fields and the critical influence of human-ventilation interactions on local contaminant dispersion. This study develops an integrated monitoring-simulation method to quantify multi-worker dust exposure, assessing how worker position and orientation modulate risk under forced ventilation in narrow roadways. Occupational-specific dust sampling provided validation data for a three-dimensional Computational Fluid Dynamics-Discrete Phase Model (CFD-DPM) incorporating human-ventilation interactions. The model integrates a MATLAB-developed breathing function to dynamically couple respiratory cycles with particle …

Go to article

A Critical Review And Methodological Recommendations For Life Cycle Assessment Of Electrochemical Co₂ Mineralization, Dennis Dadzie, Kwame Awuah-Offei May 2026

A Critical Review And Methodological Recommendations For Life Cycle Assessment Of Electrochemical Co₂ Mineralization, Dennis Dadzie, Kwame Awuah-Offei

Mining Engineering Faculty Research & Creative Works

Purpose: While researchers have relied on life cycle assessments (LCAs) to make claims about the environmental benefits of electrochemical CO₂ mineralization, no systematic review literature exists that synthesizes what we know about the LCA of electrochemical mineralization. This review aims to synthesize established knowledge on the LCAs of electrochemical CO₂ mineralization studies, identify research gaps and discuss challenges, and suggest guidelines for applying the ISO 14040/14044 LCA methodology in this sector. Methods: This paper undertook a comprehensive review of LCA studies on CO₂ mineralization with emphasis on electrochemical mineralization. We utilized relevant keywords based on the theme to search in …

Go to article

Selective Extraction Of Nickel And Cobalt From Limonitic Laterite Via Optimized Sulfation Roasting–Water Leaching And Solvent Extraction, Maryam Osali, Farid Ahani, Mohammad Reza Aboutalebi, Mandana Adeli, Javad Moghaddam, Saeid Karimi, Janaka Jayamini Wijenayake, Lana Alagha May 2026

Selective Extraction Of Nickel And Cobalt From Limonitic Laterite Via Optimized Sulfation Roasting–Water Leaching And Solvent Extraction, Maryam Osali, Farid Ahani, Mohammad Reza Aboutalebi, Mandana Adeli, Javad Moghaddam, Saeid Karimi, Janaka Jayamini Wijenayake, Lana Alagha

Mining Engineering Faculty Research & Creative Works

Limonitic laterites typically contain low Ni and Co contents and significant impurities, making the development of technical and economically feasible processes challenging. To address this challenge, this study investigates and evaluates an integrated hydrometallurgical process comprising sulfation roasting, water leaching, and solvent extraction (SX) for the selective recovery of Ni and Co from limonite-type laterite. Response Surface Methodology coupled with a Central Composite Design (RSM-CCD) was employed as a statistical experimental design tool to efficiently optimize the sulfation roasting conditions. Under the optimal sulfation roasting conditions (temperature 703 °C), selective leaching efficiencies of 87.2% for Ni and 96.6% for Co …

Go to article

Sulfuric Acid Mist Generation, Calculation, And Suppression Mechanism And Methods In Electrowinning: A Review, Ashish Kakoria, Mirza Muhammad Zaid, Guang Xu Apr 2026

Sulfuric Acid Mist Generation, Calculation, And Suppression Mechanism And Methods In Electrowinning: A Review, Ashish Kakoria, Mirza Muhammad Zaid, Guang Xu

Mining Engineering Faculty Research & Creative Works

This review discusses the events of acid mist production at the final stage of hydrometallurgical metal production in copper electrowinning. This review entails the complete process of oxygen bubble generation on the anode and its stages to form into acid mist at the surface of the electrolyte. When these bubbles burst at the solution/air interface, fine acid-containing liquid droplets become airborne and spread throughout the workspace, with the impact factors suppressing the acid mist produced during the process. Also, parameters such as bubble size, temperature, surface tension, and visco-elasticity also affect the acid mist. Sulfuric acid affects the tank houses …

Go to article

Sex-Based Effects Of Shock Energy Exposure In Warfighters, Melissa Sutter, Catherine Johnson Apr 2026

Sex-Based Effects Of Shock Energy Exposure In Warfighters, Melissa Sutter, Catherine Johnson

Mining Engineering Faculty Research & Creative Works

Personal armors were initially designed to fit against the male torso, as men previously filled roles requiring them, thus not made to accommodate the female anatomy. As a result, armor worn by female warfighters tends to have non-form fit in the waist, armpit, bust, and collarbone areas, causing reduced coverage. Shifting, riding up, air gaps, breathing difficulty, and physical discomfort have also been observed. Although this has been documented, the impact on the armor's protective capabilities has not been well studied. To address this, this study compared the protective capabilities of unisex armor for male and female warfighters from shock …

Go to article

Efficiency Comparison Of Reduced Graphene Oxide (Rgo) Composite-Incorporated Polyacrylonitrile Nanofibrous Filters For Respirable Crystalline Silica Dust And Coal Dust, Mahsa Moradi, Ashish Kakoria, Lina Zheng, Guang Xu Mar 2026

Efficiency Comparison Of Reduced Graphene Oxide (Rgo) Composite-Incorporated Polyacrylonitrile Nanofibrous Filters For Respirable Crystalline Silica Dust And Coal Dust, Mahsa Moradi, Ashish Kakoria, Lina Zheng, Guang Xu

Mining Engineering Faculty Research & Creative Works

The health of miners working in underground mines is greatly threatened by their exposure to respirable crystalline silica (RCS) found in coal dust. While coal dust includes RCS, it is important to know the specific filtration efficiency for RCS particles compared to coal dust to improve protective measures. This study compares the filtration efficiency of reduced graphene oxide (rGO) composite-incorporated Polyacrylonitrile (PAN) nanofibrous filters at four different concentrations of rGO (0, 2, 6, and 10 wt.%) for RCS particles and coal dust. The filters were made using the electrospinning method. They were tested separately with RCS particles and coal dust …

Go to article

An Adaptive Immersive Training Framework For Miner Self-Escape Readiness In Underground Mining Emergencies, Muhammad Azeem Raza, Samuel Frimpong, Saima Ghazal Mar 2026

An Adaptive Immersive Training Framework For Miner Self-Escape Readiness In Underground Mining Emergencies, Muhammad Azeem Raza, Samuel Frimpong, Saima Ghazal

Mining Engineering Faculty Research & Creative Works

Underground mining environments are complex and hazardous operations where emergencies continue to happen. Underground mine emergencies require rapid, high-stakes decision-making under conditions of uncertainty, stress, and limited visibility. Conventional mine emergency training largely relies on instruction-based approaches which provide insufficient exposure to the cognitive and behavioral demands of real underground emergency situations. There has been an identified need to train miners for knowledge, skills, abilities, and other characteristics (KSAOs). This study proposes an Adaptive Immersive Training Framework (AITF), a cognitively grounded architecture that integrates cognitive task analysis (CTA), KSAOs, and situational awareness assessment for miner self-escape training and readiness. The …

Go to article

Electroactive Pvdf/Ti3c2tx Mxene Functionalized Nanofiber Mats With High Surface Potential For High-Efficiency Indoor & Outdoor Submicron Pm(0.3-2)Μm Filtration, Ashish Kakoria, Mirza Muhammad Zaid, Aamir Iqbal, Mahsa Moradi, Lina Zheng, Guang Xu Mar 2026

Electroactive Pvdf/Ti3c2tx Mxene Functionalized Nanofiber Mats With High Surface Potential For High-Efficiency Indoor & Outdoor Submicron Pm(0.3-2)Μm Filtration, Ashish Kakoria, Mirza Muhammad Zaid, Aamir Iqbal, Mahsa Moradi, Lina Zheng, Guang Xu

Mining Engineering Faculty Research & Creative Works

Fine PM0.3-2.0 rapidly penetrates the respiratory system and causes health problems. Commercial filters remove 0.3 μm particles at ∼95 % efficiency but impose high pressure drops that make breathing difficult. We fabricate a novel electrospun PVDF-Ti3C2Tx nanofiber mat for PM0.3–2.0 filtration. Where a high electric field stretched PVDF and PVDF-Ti3C2Tx solutions into ultrafine fibers that were collected as porous nanofibrous mats. PVDF was chosen for its electroactive behavior and high dielectric constant, enabling efficient electrostatic filtration. The incorporation of Ti3C2Tx MXene enhances surface charge density and interfacial polarization, …

Go to article

A Literature Review And Conceptual Framework For Sustainability In Open-Pit Mine Planning, Raymond Kudzawu-D'Pherdd, Kwame Awuah-Offei, Esteban Koberg De La Cruz, Marcos Goycoolea, Andrea Brickey, Alexandra M. Newman Jan 2026

A Literature Review And Conceptual Framework For Sustainability In Open-Pit Mine Planning, Raymond Kudzawu-D'Pherdd, Kwame Awuah-Offei, Esteban Koberg De La Cruz, Marcos Goycoolea, Andrea Brickey, Alexandra M. Newman

Mining Engineering Faculty Research & Creative Works

This paper presents a comprehensive literature review and a conceptual framework for integrating environmental sustainability into strategic mine planning, focusing on open pits. Despite growing interest, easily discernible sustainability metrics remain elusive in early mine-planning stages, and are included as a post-processing step, if at all, rather than integrated a priori into a mine plan via, e.g., optimization. Through a literature review, we identify efforts regarding how environmental dimensions, such as emissions, water use, and land rehabilitation, are addressed across mine planning phases. We propose the Environmental Stewardship and Sustainability Framework for Mine Planning, which: (i) embeds sustainability into decision …

Go to article

Utilizing Digital Twins To Model And Optimize Hydraulic Excavator Operator Performance Through Arena Simulation, Mateo Fernando Montenegro Defaz, Kwame Awuah-Offei Jan 2026

Utilizing Digital Twins To Model And Optimize Hydraulic Excavator Operator Performance Through Arena Simulation, Mateo Fernando Montenegro Defaz, Kwame Awuah-Offei

Mining Engineering Faculty Research & Creative Works

This study aims to provide a digital twin tool for mining and construction companies to evaluate the effect of operator behaviors on the truck-loading process, focusing on swing and bucket rotation. While equipment performance estimators are available, there are few tools to assess the influence of operators. The aim is to create a discrete event simulation (DES) model in Arena® to evaluate how variations in swing and bucket angles affect hydraulic excavator production rates. We validated the DES model using real-world data from a case study to assess the differences in behavior among four operators. Results showed that Operator 1 …

Go to article

Stall Detection In Hydraulic Excavator Operations Using Heuristics And Machine Learning: A Case Study, Mateo Fernando Montenegro Defaz, Kwame Awuah-Offei, Yixiang Gao Jan 2026

Stall Detection In Hydraulic Excavator Operations Using Heuristics And Machine Learning: A Case Study, Mateo Fernando Montenegro Defaz, Kwame Awuah-Offei, Yixiang Gao

Mining Engineering Faculty Research & Creative Works

This work aims to develop a reliable algorithm for stall detection during excavator digging by analyzing key operational variables such as velocity and angular displacements from machine monitoring data. The work develops and validates a heuristic algorithm to detect stalling events and trains a support vector machine classification algorithm to distinguish between "normal" digging cycles and cycles with stalling. This work is a novel attempt at using a classification algorithm to categorize digging cycles into normal and those with stalling events based on machine monitoring data alone. The developed classification algorithm achieved a sensitivity of 100%, indicating it correctly identified …

Go to article

Analysis Of Pull-Out Tests For Resin-Grouted Rib Bolts, Khaled Mohamed, Yuting Xue, Dogukan Guner, Alper Kirmaci, Taghi Sherizadeh Jan 2026

Analysis Of Pull-Out Tests For Resin-Grouted Rib Bolts, Khaled Mohamed, Yuting Xue, Dogukan Guner, Alper Kirmaci, Taghi Sherizadeh

Mining Engineering Faculty Research & Creative Works

Resin-grouted rib bolts serve as a crucial means of stabilizing spalling of coal ribs in underground coal mines. A comprehensive investigation into their efficacy was undertaken by a collaborative effort between the National Institute for Occupational Safety and Health (NIOSH) and Missouri University of Science and Technology (MST). This study involved pull-out tests of rib bolts in multiple locations, including six coal mines and the NIOSH research mine. A total of seventy-three (73) pull-out tests were conducted for rib bolts installed at different rotation speeds and a wide range of anchorage lengths, ranging from a short encapsulation length of 0.305 …

Go to article

Next Last