Mining Engineering Commons^™

Preliminary Remote Identification Of Unstable Zone On Large-Scale Waste Dump At Mae Moh Mine Using Insar Technique, Chitra Buth

Chulalongkorn University Theses and Dissertations (Chula ETD)

Mae Moh Mine is one of the largest lignite mine in Southeast Asia, operated by the Electricity Generating Authority of Thailand (EGAT). It is located in the northern part of Thailand, in Mae Moh district, Lampang province. In March 2018, a significant sliding incidence occurred at a waste dump site with sliding area of 1.56 km2 approximately, highlighting the pressing issue of instability within this large-scale waste dump area. This study aims to address this concern in the future and demonstrate an innovative method for investigating the failure by employing Interferometric Synthetic Aperture Radar (InSAR) technology. The methodology involves the …

Performance And Field Testing Of Geotextiles For Dewatering Rare Earth Element Hydraulic Preconcentrate From Hardrock Amd, Ian R. Bird

Graduate Theses, Dissertations, and Problem Reports (ETD)

As part of ongoing efforts to develop a domestic Rare Earth Elements (REE) supply chain the Hydraulic Preconcentrate (HPC) produced at the Horseshoe bend treatment plant (HsB) was manufactured and evaluated as a potential source for feedstock. After the existing clarifiers on the site were flipped to the desired pH set points, HPC was manufactured and pumped to 24 geobags. The geobags were then passively dewatered to increase the total solids percentage. The geobags evaluated were comprised of: Woven geotextiles, composite (woven and non- woven), and geobags augmented with Capillary Channel Fiber (CCF). Column Filtration Tests (CFTs) were performed onsite …

Characterization And Evaluation Of Various Biochar Types As Green Adsorbents For Rare Earth Element Recovery From Aqueous Solutions, Oluwaseun Victor Famobuwa

Graduate Theses, Dissertations, and Problem Reports (ETD)

Rare earth elements (REEs) are members of the lanthanide family (atomic number 57 – 71). They are significantly important to the global economy due to their applications in renewable energy, defense, and medical industries. REEs are primarily derived from bastnaesite and monazite but may also be present in xenotime, cerite, alanite, and many other types of mineralization in lesser amounts. Due to the increasing demand for REEs and their criticality in the supply chain, the need to explore secondary sources of REEs has gained tremendous importance.

Secondary sources of REEs include but are not limited to acid mine drainage (AMD), …

Anaerobic Reductive Bioleaching Of Manganese Ores, Neha Sharma

Dissertations, Master's Theses and Master's Reports

Manganese extraction by biological methods is a green and economical way to produce manganese from low as well as high grade manganese ores. This is especially important for US ores, which are primarily either small in extent, low-grade with a high iron content, or both. They are therefore not suitable for conventional mining, which is very capital-intensive and requires a large up-front investment and are therefore imported at high costs. The goal is therefore to develop a process that can be applied at small scales, with minimal startup costs, and low equipment and labor requirements. It is also critical to …

The Effects Of Uv-Radiation On The Removal Of Microplastics In Water Using Agglomeration-Micro-Flotation, Palot Srichonphaisarn

Chulalongkorn University Theses and Dissertations (Chula ETD)

Microplastics, plastic particles with diameter 1 micrometer to 5 millimeters, can disturb marine ecosystems due to their small size and surface properties which can be a carrier for hazardous matters. While wastewater treatment plants could remove some microplastics but some of them remain. Among the various removal techniques, flotation is a potential method due to the hydrophobic nature of microplastics. This study investigates the effects of ultraviolet radiation on the surface wettability of microplastics and removal efficiency of microplastics. The 6 types of microplastics were prepared from plastic boards. After the ultraviolet radiation, the results showed that ultraviolet radiation could …

Dig Limits Optimization Using Binary Integer Linear Programming Method In Open Pit Mines, Hussam Naif Altalhi

Masters Theses

"Dig limits optimization is the process for classifying different materials (e.g., ore, stockpile material, and waste) into appropriately sized contiguous zones for open pit mining. The efficient determination of dig-limits is crucial for profitable and sustainable resource extraction in mining. Previous research has focused on defining dig-limits manually or using optimization approaches, but these methods are limited to only handling two material destinations (ore and waste). Thus, there is a need for operations research methods that consider the selectivity of mining equipment and can optimize dig-limits for metal mining operations with more than two material destinations. Consequently, the objective of …

The Influence Of Surfactants' Ionicity On The Performance Of Coal Dust Suppression, Zidong Zhao, Ping Chang, Apurna Ghosh, Guang Xu, Yanwei Liu, Ramakrishna Morla

Mining Engineering Faculty Research & Creative Works

Coal dust is a significant health hazard for coal workers, as prolonged inhalation can lead to severe diseases such as Coal Workers' Pneumoconiosis. Water spray with surfactants is commonly used as a pre-control strategy to control coal dust in underground mines. The zeta potential test is a widely used static test to evaluate surfactants with different ionicities. However, there are still some arguments about the evaluation criteria of zeta potential on surfactant performance between different researchers. Moreover, whether zeta potential can be used as an index to evaluate the surfactant suppression performance is inconclusive. To address these problems, this study …

Minerrouter : Effective Message Routing Using Contact-Graphs And Location Prediction In Underground Mine, Abhay Goyal, Sanjay Madria, Samuel Frimpong

Computer Science Faculty Research & Creative Works

Location-based distributed communication in underground mines has been a hard problem to solve due to unreliable centralized architecture such as leaky feeder systems, high attenuation, and the unavailability of GPS signals. Delay Tolerant Networks (DTN) enable decentralized message routing using the store-carry-forward method that can help in creating situational awareness needed to handle emergency and disaster scenarios. The ability to predict where the DTN nodes (miner) might have been at/are headed to (with respect to the mine regions and pillars) at different times, combined with contact-based routing and intelligent handling of buffer, can be used for better delivery of messages. …

Investigating Critical Mineral Recovery And Carbon Mineralization Potential In Coal Fly Ash, Syabilla Cardosh

Graduate Theses, Dissertations, and Problem Reports (ETD)

Coal fly ash (CFA), a byproduct of coal combustion, represents an innovative opportunity to address the rising demand for critical minerals and the need to reduce CO2 emissions due to its significant concentrations of calcium and magnesium. By providing insights and preliminary data, this study aims to contribute to the foundational understanding necessary for future development.

A multidisciplinary approach was employed to assess CFA’s potential, including detailed chemical and mineralogical characterization using X-ray fluorescence (XRF), inductively coupled plasma mass spectrometry (ICP-MS), X-ray diffraction (XRD), and scanning electron microscopy (SEM). XRD analysis revealed crystalline phases in the CFA samples. At the …

Novel Uses Of Distributed Optical Fiber Sensing For Geo-Mechanical Monitoring, Samuel Vincent Nowak

Doctoral Dissertations

"Rock mass monitoring in underground excavations is crucial for ensuring workplace safety and efficiency. As mines become deeper and more complex, the need to monitor larger volumes of rock during mining becomes impractical with existing instruments due to high costs. Distributed Optical Fiber Sensing (DOFS) is a powerful technology with advantages like long sensor length, real-time measurement capabilities, ease of installation, low cost, and distributed measurement. However, its application in rock mass monitoring is limited, especially in the mining industry. This study addresses a major gap in DOFS technology, specifically the inability of long-range distributed optical fiber strain sensors to …

Monitoring And Control Of Coal Dust Exposure Using Low-Cost Pm Sensors And Computational Fluid Dynamics, Nana Kobina Amoako Amoah

Doctoral Dissertations

"Overexposure to respirable coal mine dust has been linked to causing serious health problems including coal workers pneumoconiosis (CWP) and chronic massive fibrosis. The prevalence of these health problems has been on the increase since the 2000s due to increased exposure levels with roof bolter operators having the highest exposure levels. The currently used PDM3700 is too expensive, heavy and bulky which limits their use only for regulatory monitoring failing to measure miners’ personal exposure levels. Also, since roof bolter operators are more prone to elevated coal dust levels, the canopy air curtain (CAC) was developed to protect then high …

Optimization Of Fire Emergency Preparedness In Underground Mining Environments: An Agent-Based Evacuation Approach, Oluwafemi Babatunde Salami

Doctoral Dissertations

"Underground mining environments present a complex interplay of thermal and non-thermal hazards, with fires constituting a significant risk due to the release of heat smoke from incomplete combustion. The propagation of these hazards through the ventilation networks underscores the critical need for understanding fire scenarios and their interaction with the underground environment. Existing knowledge regarding past mine fire disasters, and quantification of associated hazards and risks are insufficient for optimizing emergency evacuation strategies in the event of an underground fire emergency.

This research endeavors to bridge this gap by developing advanced quantitative risk assessment and evacuation models tailored specifically for …

Numerical Investigation For The Effect Of Joint Persistence On Rock Slope Stability Using A Lattice Spring-Based Synthetic Rock Mass Model, Mariam Al-E'Bayat, Dogukan Guner, Taghi Sherizadeh, Mostafa Asadizadeh

Mining Engineering Faculty Research & Creative Works

This study underscores the profound influence of rock joints, both persistent and non-persistent with rock bridges, on the stability and behavior of rock masses—a critical consideration for sustainable engineering and natural structures, especially in rock slope stability. Leveraging the lattice spring-based synthetic rock mass (LS-SRM) modeling approach, this research aims to understand the impact of persistent and non-persistent joint parameters on rock slope stability. The Slope Model, a Synthetic Rock Mass (SRM) approach-based code, is used to investigate the joint parameters such as dip angle, spacing, rock bridge length, and trace overlapping. The results show that the mobilizing zones in …

Comparative Analysis Of Different Cfd Turbulence Models For A Diesel Pool Combustion Event In An Underground Mine: A Case Study, Ashish Ranjan Kumar, Oluwafemi Salami, Nana A. Amoah, Guang Xu

Mining Engineering Faculty Research & Creative Works

Underground Mine Fires Are Dangerous, Consume Resources, and Emit Pollutants. Therefore, Acquiring In-Mine Data for Fire Research is Hazardous and Expensive Due to Unsteady Temperature Changes and Toxic Gas Emissions. Computational Fluid Dynamics (CFD) Models Are Often Developed to Mimic Airflows and Combustion-Associated Heat Transfer. However, Research on the Performance Evaluation of the CFD Turbulence Models to Mimic Fire Events is Limited. This Paper Summarises the Modelling Results for a Diesel Pool Fire Event in an Experimental Underground Mine that Uses an Exhaust Ventilation System. a Fire Dynamics Simulator (FDS) Model Was Developed to Show the Spatio-Temporal Temperature Evolution. Reynolds-Averaged …

Investigation Into Helmet–Head Shock Wave Interactions At Low Overpressures Through Free-Field Blasts And Schlieren Imagery, C. J.H. Thomas, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

Brain Injuries in Warfighters Due to Low-Level Blasts, Even While Wearing a Helmet, Are Common. Understanding How the Form of a Shock Wave Changes When Impacting a Head Donning a Helmet May Present Solutions to Reducing Shock Loading on the Head, Thereby Reducing the Prevalence of Blast-Induced Traumatic Brain Injury. a Manikin with PCB Piezoelectric Transducers throughout the Head Was Exposed to Low-Pressure Free-Field Blasts using an RDX-Based Explosive Charge Designed to Output a Side-On overpressure of 4 Pounds Per Square Inch (Psi) [27.5 Kilopascals (KPa)] with and Without a Helmet. Orientations of 0, 45, 90, 135, and 180 Degrees …

Quantitative Proteomic Profiling In Brain Subregions Of Mice Exposed To Open-Field Low-Intensity Blast Reveals Position-Dependent Blast Effects, M. Jackson, S. Chen, P. Liu, M. Langenderfer, C. Li, H. R. Siedhoff, A. Balderrama, R. Li, Catherine E. Johnson, C. M. Greenlief, I. Cernak, R. G. Depalma, J. Cui

Mining Engineering Faculty Research & Creative Works

The Neurological Consequences of Combat Blast-Induced Neurotrauma (BINT) Pose Important Clinical Concerns for Military Service Members and Veterans. Previous Studies Have Shown that Low-Intensity Blast (LIB) Results in BINT with Multifaceted Characteristics in Mice Exposed to Open-Field Blast in Prone Position. Although the Prone Position is Natural for Rodents, Experimental Models of Blast using This Position Do Not Represent Common Scenarios of Human Standing While Being Exposed to Blast during Deployment or Military Training. in This Study, We Used Our Previously Developed BINT Mouse Model of Open-Field LIB with Mice in an Upright Position and Then Used Quantitative Proteomics and …

The Mechanism And Effect Of Seismic Source Location Using Double Waves In Three-Dimensional Microseismic Monitoring, Zhigang Wang, Xiaoqing Wang, Shunlin Yin, Maochen Ge

Mining Engineering Faculty Research & Creative Works

Accurate seismic source location has always been the most important purpose of micro seismic and seismic monitoring. The location accuracy inside the existing monitoring networks is generally high, whereas the accuracy in the external area and sensor accessories area tends to be low. This scenario contributes to an overall limitation in the effective monitoring area. The seismic source location was performed in this study using P waves and S waves to improve the location accuracy outside the monitoring networks and in the adjacent area and enlarge the high-accuracy control area of the monitoring networks. Moreover, the mechanism of seismic source …

Spatiotemporal Variance Image Reconstruction For Thermographic Inspections, Logan M. Wilcox, Emily M. Johnson, Emma T. Bohannon, Catherine E. Johnson, Kristen M. Donnell

Mining Engineering Faculty Research & Creative Works

Active microwave thermography (AMT) is a nondestructive testing and evaluation (NDT&E) technique that utilizes a radiating antenna to induce a thermal increase on or within a specimen under test (SUT). The radiated power density is spatially nonuniform and therefore results in a spatially nonuniform thermal excitation, which may result in missed or false indications of defects. To this end, this work proposes a novel image reconstruction technique for nonuniform excitation/heating and is referred to as Spatiotemporal Variance Reconstruction (STVR). STVR utilizes the spatial and temporal variance of the surface thermal profile. STVR is advantageous in that it does not require …

Generation Of Micro-Fracture Clouds In Rocks: Mechanisms And Applications, U. Mutlu, G. Boitnott, A. Lisjak, O. Mahabadi, Taghi Sherizadeh, D. Guner, S. Nowak, A. Ghassemi

Mining Engineering Faculty Research & Creative Works

Volume increasing or decreasing processes in rocks can lead to inter or intragranular fractures in subsurface formations. The volume change can be caused by chemical reactions involving fluid, reactive transport, and coupling with the mechanical deformation of the grains. Depending on stress, material properties and coupled thermo-hydro-mechanical-chemical (THMC) conditions, grain scale fractures may propagate and coalesce, forming a cloud of well-connected fracture networks. The mechanisms responsible for propagation, coalescence and inhibition of cloud fractures are not well known. In this study, we review coupled micro-fracture network generation mechanisms as published in the literature and observed in field, experiments, and models. …

A Review Of Current Safe Distance Calculations And The Risk Of Mild Traumatic Brain Injury, A. R. Loflin, C. E. Johnson

Mining Engineering Faculty Research & Creative Works

Explosive breaching is a tactic operational professionals use to gain rapid entry and tactical advantage. This tactic exposes individuals to repeated low-level blasts (LLB), overpressure exposure generally occurring from user-directed munitions. The experimentation described in this paper highlights the need for further research into implementing explosives in tactical situations, specifically in confined areas, and the effects on individuals exposed. While current safety calculations predict peak pressures from an open-air detonation, this study incorporates the impulse of the total explosive event in a confined space. Sixteen explosive events were conducted to measure peak overpressures of the total duration of the event …

Experimental Investigation Of A Viscoelastic Liner To Reduce Under Helmet Overpressures And Shock Wave Reflections, Cody J.H. Thomas, Fatih Dogan, Catherine E. Johnson

Materials Science and Engineering Faculty Research & Creative Works

Introduction: Shock wave overpressure exposures can result in blast-induced traumatic brain injury (bTBI) in warfighters. Although combat helmets provide protection against blunt impacts, the protection against blast waves is limited due to the observed high overpressures occurring underneath the helmet. One route to enhance these helmets is by incorporating viscoelastic materials into the helmet designs, reducing pressures imposed on the head. This study aims to further investigate this mitigation technique against under-helmet overpressures by adding a viscoelastic liner to the inside of a combat helmet. Methods: The liner's effectiveness was evaluated by exposing it to free-field blasts of Composition C-4 …

A Binary Integer Linear Programming Model For Optimizing Underground Stope Layout, Theophilus Mensah

Masters Theses

"Underground mine planning engineers face significant challenges when determining what geometry provides the most profitable and safe stope for extraction. Several techniques and optimization algorithms have been developed in recent years, but most fail to find optimal solutions because they are heuristic or LP-based without efficient geometric constraints. This thesis work proposes a two-dimensional binary linear programming (BILP) model for determining the optimal combination of blocks in a stope that maximizes the economic value of the layout of stopes for a sublevel deposit. The work draws from Queyranne and Wolsey’s (2017 & 2018) formulations of tight constraints for bounded up/down …

High Strain Rate Analysis Of 3d Printed Concrete As Compared To Conventionally Cast Concrete, Weston Mcleod Thomsen

Masters Theses

"3D Printed Concrete (3DPC) is a developing method of construction that has advantages over conventional methods, including formwork reduction, complex geometry, and expedited construction. This technology has potential benefits for the military when considering the austere environments that forward operating bases are built in. This study aims to assess 3DPC applications in protective structures that protect critical assets from explosive blasts. These protective structures experience a high-strain rate response during blast loading of the structure, and the effects of this have yet to be analyzed in the literature concerning 3DPC. With the lack of prior research, the focus here will …

Laboratory Scale Experimental Analysis Of The Effect Of Surfactants On Acid Mist Suppression During Copper Electrowinning, Thurman Kollie Elgin

Masters Theses

"The reduction in acid mist generation is an industrial occupational objective in the electrowinning industry of base metals. The technology of electrowinning as an extractive metallurgical technique of metals proficiently contributed to the recovery of pure base metals. During the process of electrowinning, oxygen bubbles are generated on the anode of the electrowinning cell because of the over potential in the cell due to high voltage. The bubbles formed tend to contain sulfuric acid of the electrolyte in the form of liquid-gas ascending particles of the solution. As these bubbles ascend to the surface of the solution, they burst at …

Discrete Event Simulation (Des) In Swapping/Charging Of Battery Electric Vehicles In Underground Mining, Albert Einstein Amponsem

Masters Theses

"With climate change concerns escalating, international agreements such as the Kyoto Protocol, the US Presidential Policy, and the Paris Agreement aim to reduce greenhouse gas (GHG) emissions, targeting significant reductions by 2050. The mining sector, a notable contributor to GHG emissions primarily through diesel-powered material haulage, emits approximately 68 million tons of CO₂ annually. Transitioning to Battery Electric Trucks (BETs) presents a viable mitigation strategy by replacing diesel trucks with electric alternatives, thus eliminating CO₂ emissions.

However, the effectiveness of BETs hinges on optimized battery swapping and charging procedures. This study employs Discrete Event Simulation (DES), a computational …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Critical Links And Development Trends Of Research On Active Tectonics, Yuan Daoyang, Wang Youlin, Li Shuwu, Wang Wanhe, Li Linyuan, Zou Xiaobo, Wen Yameng

Coal Geology & Exploration

Following a brief introduction of the general characteristics of active tectonics in China, this study analyzed two new features of large earthquakes with M_s ≥ 7 that have struck continental China since the beginning of the 21st century: (1) Large earthquakes occur primarily in clusters along the boundary fault zone of the Bayanhar active tectonic block—part of the Qinghai-Tibet ateau active tectonic block. (2) Reverse fault-fold earthquakes have occurred multiple times within active basins or at basin-mountain boundaries. In response to the new seismic activity features and the new demand for disaster prevention and mitigation of engineering construction and …

Activity Variations Of The Shanzuokou-Sihong Fault Within The Jiangsu Segment Of The Tancheng-Lujiang Fault Zone And Their Origins, Zhang Hao, Li Wei, Li Limei, Yan Yunxiang, Jiang Xin, Wang Jinyan, Zhao Qiguang, Gu Qinping, Xu Hangang

Coal Geology & Exploration

The Shanzuokou-Sihong fault, having undergone the entire evolutionary process of the Tancheng-Lujiang fault zone, exhibits segmentation during the latest activity epoch. Determining the location and origin of its activity segmentation will provide a significant reference for exploring the activity variations of its branch faults and their origins. This study investigated the activity of the Shanzuokou-Sihong fault using a three-dimensional approach combining field geological surveys, shallow seismic exploration, and cross-well stratigraphic correlation. The results show that the Shanzuokou-Sihong fault is a Late Pleistocene active fault on the east side of the North Maling Mountain and a Middle Pleistocene fault in Xinyi …

Revealing Fine-Scale Crustal Structure And Tectonic Features In The Xiong’An New Area And Its Periphery Using Deep Seismic Reflection Profiling, Yue Hangyu, Wang Kai, Wang Xiaojiang, Zhang Baowei, Zhang Kai

Coal Geology & Exploration

As an effective method to accurately reveal the deep geological structures and tectonic features of the Earth, deep seismic reflection profiling has been increasingly applied to the exploration of the continental and oceanic crusts, as well as the upper mantle of the lithosphere, making it internationally recognized pioneer technique for deep Earth exploration. This study examined the deep seismic reflection profile spanning across the Xiong’an New Area in Hebei Province, aiming to reveal the crustal structure and tectonic features of the study area. Key findings are as follows: (1) The crust in the study area can be divided into the …

Application Of Integrated Geophysical Surveys In The Identification Of Hidden Fire Sources In Spontaneous Combustion Zones In Coal Seams, Ma Zijun, Yang Haiyan, Li Wenyu, Xu Yunlei, He Yunlan, Liu Zhuoming, Li Peng, Huang Jiu

Coal Geology & Exploration

Spontaneous combustion in coal seams, a factor influencing the development of many mining areas in China, can cause severe coal resource loss and environmental pollution. The positioning and distribution identification of hidden fire sources can provide an important basis for coal mine enterprises to prepare prevention and control measures. They are also a hot research topic and challenge in the field of coal fire disasters. Suitable channels for ventilation and oxygen supply are necessary for spontaneous combustion in coal seams. When the oxidative heat release rate of coals exceeds the heat dissipation rate, coal temperature will rise until the occurrence …