Electronic Devices and Semiconductor Manufacturing Commons^™

Polymer-Based Thermoelectric Devices, Stuart W. Hilsmier, Edward P. Tomlinson, Bryan Boudouris

The Summer Undergraduate Research Fellowship (SURF) Symposium

Currently, over 50% of all energy generated in the US is lost as waste heat, and thermoelectric generators offer a promising means to recoup some of this energy, if their efficiency is improved. While organic thermoelectric materials lack the efficiency of their inorganic counterparts, they are composed of highly abundant resources and have low temperature processing conditions. Recently, a new class of redox-active polymers, radical polymers, has exhibited high electrical conductivity in an entirely amorphous medium. In addition, these radical polymers have a simple synthetic scheme and can be highly tunable to provide desired electrical properties. In this study, the …

Characterization And Testing Of A 5.8 Kv Sic Pin Diode For Electric Space Propulsion Applications, Alexandra Toftul

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Inductive Pulsed Plasma Thrusters (IPPTs) are a type of in-space propulsion that has multiple advantages over conventional chemical propulsion for long-duration, deep space missions. Existing IPPT prototypes utilize spark gap switches, however these are subject to corrosion problems that make them unreliable for long-term use. Recent advances in solid state switching technology have opened up a variety of switching options that could provide greater reliability, controllability, and increased energy efficiency. Taking advantage of this, a novel thruster drive circuit topology containing a high-power silicon controlled rectifier (SCR) and series fast recovery diode (FRD) is proposed that is expected to increase …

Design, Fabrication And Characterization Of Plasmonic Fishnet Structures For The Enhancement Of Absorption In Thin Film Solar Cells, Sayan Seal

Graduate Theses and Dissertations

Incorporating plasmonic structures into the back spacer layer of thin film solar cells (TFSCs) is an efficient way to improve their performance. The fishnet structure; which is a tunable, plasmonic light scatterer is used to enhance light absorption. Unlike other plasmonic particles that have been previously suggested, the fishnet is an electrically connected wire mesh and does not result in electric field localization, hence it results in greater absorption in the intrinsic Si layer. Unlike other designs, the fishnet structure is placed in the back spacer layer of the TFSC, so it does not block any incident light. There is …

Thread Based Battery For Low Power E-Textile Applications, Pranav Laxmanan, Girish Chitnis, Rahim Rahimi, Babak Ziaie

The Summer Undergraduate Research Fellowship (SURF) Symposium

Textile electronic systems, or e-textiles, are on the rise but their utility is limited by its power demand. Potential applications include point-of-care diagnostic systems that would enable medical monitoring at the site of care. A small, inexpensive, and easy to use battery would enhance the capabilities of e-textile. Here we propose a thread based battery that attempts to satisfy these requirements. The thread based battery uses chemistry similar to an alkaline battery. The fabrication process involves patterning of current collector (silver epoxy or carbon ink) followed by zinc electroplating and manganese dioxide deposition. Thread present in between these two electrodes …

Understanding Vehicular Traffic Behavior From Video: A Survey Of Unsupervised Approaches, Brendan Tran Morris, Mohan Manubhai Trivedi

Electrical & Computer Engineering Faculty Research

Recent emerging trends for automatic behavior analysis and understanding from infrastructure video are reviewed. Research has shifted from high-resolution estimation of vehicle state and instead, pushed machine learning approaches to extract meaningful patterns in aggregates in an unsupervised fashion. These patterns represent priors on observable motion, which can be utilized to describe a scene, answer behavior questions such as where is a vehicle going, how many vehicles are performing the same action, and to detect an abnormal event. The review focuses on two main methods for scene description, trajectory clustering and topic modeling. Example applications that utilize the behavioral modeling …

Electrical Design Considerations And Packaging Of Power Electronic Modules, Shijie Wang

Graduate Theses and Dissertations

A modern power electronic module can save significant energy usage in the power electronic systems by improving their switching efficiencies. One way to improve the efficiency of the power electronic module is to reduce its parasitic circuit elements. The purpose of this thesis is to investigate the mitigation of parasitic circuit elements in power electronic modules. General methods of mitigating parasitic inductances were analyzed by the Q3D Extractor and verified by the time-domain reflectometry (TDR) measurements. In most cases, the TDR measurement results closely matched those predicted by the Q3D Extractor. These methods were applied to design and analyze a …

2-Dimensional Personal Motion Energy Harvester For Low Power Electronics, Manuel Gutierrez, Sean Scott, Dimitrios Peroulis

The Summer Undergraduate Research Fellowship (SURF) Symposium

In a lab, it becomes crucial to have a way to monitor that lab workers aren’t exposed to too much radiation. Such a device that detects this should have an energy harvester so that batteries aren’t required. The need for an energy harvester that generates power from a user’s movements in 2 dimensions is needed. This energy harvester is needed to power a radiation monitor. An energy harvester that generates power based off movements in 2 dimensions was developed. The energy harvester was created through a series of prototypes. Each prototype was built from a CAD drawing and a stereolithography …

Investigation Of Cds Nanowires And Planar Films For Enhanced Performance As Window Layers In Cds-Cdte Solar Cell Devices, Jianhao Chen

Theses and Dissertations--Electrical and Computer Engineering

Cadmium sulfide (CdS) and cadmium telluride (CdTe) are two leading semiconductor materials used in the fabrication of thin film solar cells of relatively high power conversion efficiency and low manufacturing cost. In this work, CdS/CdTe solar cells with a varying set of processing parameters and device designs were fabricated and characterized for comparative evaluation. Studies were undertaken to elucidate the effects of (i) each step in fabrication and (ii) parameters like thickness, sheet resistance, light absorptivity solution concentration, inert gas pressure etc. Best results were obtained when the thickness of CdS planar film for the window layer was in the …

Copper Indium Diselenide Nanowire Arrays In Alumina Membranes Deposited On Molybdenum And Other Back Contact Substrates, Bhavananda R. Nadimpally

Theses and Dissertations--Electrical and Computer Engineering

Heterojunctions of CuInSe₂ (CIS) nanowires with cadmium sulfide (CdS) were fabricated demonstrating for the first time, vertically aligned nanowires of CIS in the conventional Mo/CIS/CdS stack. These devices were studied for their material and electrical characteristics to provide a better understanding of the transport phenomena governing the operation of heterojunctions involving CIS nanowires. Removal of several key bottlenecks was crucial in achieving this. For example, it was found that to fabricate alumina membranes on molybdenum substrates, a thin interlayer of tungsten had to be inserted. A qualitative model was proposed to explain the difficulty in fabricating anodized aluminum oxide …

Wireless Sensor Networks And The Internet Of Things, Yingtao Jiang, Lei Zhang, Ling Wang

Electrical & Computer Engineering Faculty Research

It is estimated that mobile internet devices that can act as sensors will outnumber humans this year (2013), and by 2015, there will be about 15 billion internet-connected devices. Related applications are thriving in commercial, civic, and scientific operations that involve sensors, web, and services, leading by both academic societies and industry companies. It is commonly accepted that the next generation of internet is becoming the “Internet of Things (IoT)” which is a worldwide network of interconnected objects and their virtual representations uniquely addressable based on standard communication protocols. Identified by a unique address, any object including computers, mobile phones, …

Estimation Of Performance Indices For The Planning Of Sustainable Transportation Systems, Alexander Paz, Pankaj Maheshwari

Electrical & Computer Engineering Faculty Research

In the context of sustainable transportation systems, previous studies have either focused only on the transportation systemor have not used a methodology that enables the treatment of incomplete, vague, and qualitative information associated with the available data. This study proposes a system of systems (SOS) and a fuzzy logic modeling approach. The SOS includes the Transportation, Activity, and Environment systems. The fuzzy logic modeling approach enables the treatment of the vagueness associated with some of the relevant data. Performance Indices (PIs) are computed for each system using a number of performance measures. The PIs illustrate the aggregated performance of each …

Modeling Leakage Currents In Metal Insulator Metal Structures With High K Materials, Priyamvada Maleeswaran

Electrical & Computer Engineering Theses & Dissertations

Various products such as personal computers, cellular phones and mobile devices require high speed and low power consumption. Such improvements have been attained by minimizing physical dimensions of electronic devices, leading to high density integration of transistors and capacitors on integrated chips (]Cs). However, as a consequence of down-scaling device dimensions, tunneling of electrons through thin gate oxides (SiO₂) increases, leading to increased static power leakage. This constitutes wastage in power, and for the case of memory applications necessitates faster refresh cycles. In order to overcome such issues, high-k materials (such as HfO₂ and ZrO₂) …

Modeling Of Power Semiconductor Devices, Tanya Kirilova Gachovska

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

One of the requirements for choosing a proper power electronic device for a converter is that it must possess a low specific on-resistance. The specific on-resistance of a bipolar device is related to the base width and doping concentration of the lightly doped drift region. This means that the doping concentration and the width of the low-doped base region in a bipolar device must be carefully considered to achieve a desired avalanche breakdown voltage and on-resistance. In order to determine the technological parameters of a semiconductor device, a one dimensional analysis is used to calculate the minimum depletion layer width, …

Fabrication And Characterization Of Thermomechanically Processed Sulfur And Boron Doped Amorphous Carbon Films, Lonnie Carlson

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Small scale, high power density, reliable, and long-life power supplies would be useful or even critical for space missions or the growing number of microdetectors, microsensors, and miniature vehicles. Alpha or beta particle voltaic devices could satisfy these requirements but have been shown to degrade quickly due to radiation damage. Amorphous carbon (a-C) PN junctions or PIN devices could provide radiation hardness and sufficiently high efficiency. As the range of alpha and beta particles in a-C is ~20-120μm, much thicker films than are typical are needed to maximize collection of the particle energy.

In this work, the fabrication of thermomechanically …

Cell Phone Charger For The Dc House Project, Andrew Hefner, Antonio Magdaleno

Electrical Engineering

The goal of this project is to create a multiple output cell phone charger for the DC House project. The cell phone charger is essentially a DC-DC converter. The converter takes an input of 48 volts from the outlet in the DC House and decreases the voltage level to 5 volts; the input voltage level of all cellular devices. By designing an isolated flyback converter with initial specification in LTSpice simulation software, a converter was created. By monitoring the input and output voltage and current using the multi-meters and electronic load, we determined the charger to be 71% efficient when …

Energy Harvesting From Elliptical Machines: Dc-Dc Converter Design Using Sepic Topology, Martin Kou

Master's Theses

Cal Poly’s ongoing Energy Harvesting from Exercise Machines (EHFEM) project is a very convenient and cost-effective way for generating DC power from physical exercise and sending it back to the electrical grid as AC power, providing a renewable energy source for the future. The EHFEM project consists of numerous subprojects involving converting different types of exercise machines for power generation. This project is a continuation of one of the previous subprojects, specifically involving an elliptical machine, and focuses on improving system functionality at different machine settings without altering the elliptical user’s experience by selecting a new DC-DC converter design, while …

Can Morphology Tailoring Improve The Open Circuit Voltage Of Organic Solar Cells?, Biswajit Ray, M. S. Lundstrom, Muhammad A. Alam

Birck and NCN Publications

While the effect of interfacial morphology on the short circuit current (I_SC) of organic photovoltaic devices (OPVs) is well known, its impact on open circuit voltage (V_OC) and fill-factor (FF) are less clear. Since the output power of a solar cell Pout = I_SCV_OCFF, such understanding is critical for designing high-performance, morphology-engineered OPVs. In this letter, we provide an explicit analytical proof that any effort to radically improve V_OC by tailoring bulk heterojunction morphology is futile, because any increase in ISC due to larger interface area is counterbalanced by corresponding increase …

Fabrication Of Composite Nanomaterials For Thin Film Amorphous Silicon Solar Cells, Benjamin Seth Newton

Graduate Theses and Dissertations

A material with the precise combination of amorphous silicon and polycrystalline silicon would be able to take advantage of the high absorption capabilities of amorphous silicon and the electron transport capabilities of polycrystalline silicon. Polycrystalline nanostructures in the form of wires can also take advantage of other properties of light absorption, trapping and scattering inherent in nanowire structures. These properties of high absorption and electron transport in one device would lead to advances in the search for highly efficient low cost solar cells and sensors. In this work a thin film material composed of an array of polycrystalline silicon nanostructures …

In-Situ Ellipsometry Characterization Of Anodically Grown Silicon Dioxide And Lithium Intercalation Into Silicon, Eric A. Montgomery

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, in-situ ellipsometry and electroanalytical investigations of two electrochemical processes are reported: including the formation of anodically grown silicon dioxide and the intercalation of lithium into silicon. Analysis of the ellipsometry data shows that the anodically grown silicon dioxide layer is uniform and has similar properties as thermally grown silicon dioxide. The lithium-ion intercalation data reveals non-uniform thin film formation, which requires further studies and development of appropriate ellipsometric optical models.

Advisers: Eva Schubert and Mathias Schubert

Programmable Household Led Light Fixture, Jordan Locano

Electrical Engineering

This report details the development and construction of a LED light fixture to be used for household lighting. This document details background information, design ideas, project specifications, production, assembly, testing, and conclusions involved with this project. The goals of this project is to design and build a cost-effective replacement for traditional room lighting that can perform better and last longer than traditional methods.

Project 308: Augmented Reality Mario Kart, Joseph Abad, David Allender, Joryl Calizo, Ryan Gaspar, Gavin Lee

Computer Engineering

Mario Kart is a popular go-kart racing game developed by Nintendo. The premise of the game is simple: drive a go-kart along a racetrack and reach the finish line before the other players. What makes this game unique, however, is the inclusion of weapons, traps, and other projectiles that a player can use to gain an advantage in the race. We have taken on the challenge of not only recreating this amazing game, but using the art of Augmented Reality to fully immerse the player in the full experience. Rather than play the game on a television screen with a …

A Compact Physical Model For Morphology Induced Intrinsic Degradation Of Polymer Based Bulk Heterojunction Solar Cell, Biswajit Ray, Muhammad A. Alam

Birck and NCN Publications

The gradual loss of efficiency during field operation poses a fundamental challenge for economic viability of any solar cell technology. Well known examples include light-induced degradation in Si-based cell (Staebler-Wronski effect), Cu diffusion in thin film (CIGS) cell, hot-spot degradation in series connected modules, etc. Here we develop a compact model for an intrinsic degradation concern for bulk heterojunction type organic photovoltaic (BH-OPV) cells that involve continued (thermal) phase segregation of the donor-acceptor molecules leading to characteristic loss of efficiency and performance. Our approach interprets a number of BH-OPV device degradation measurements within a common framework and suggests/rationalizes intuitive routes …

The Applications And Limitations Of Printable Batteries, Matthew Delmanowski

Graphic Communication

This study focuses on the potential applications for printed batteries and how they could affect the printing industry. It also analyzes the main problems associated with manufacturing this technology and what needs to be done to overcome these issues. To find the answers to these questions, two methods of research were used. The first was through the elite and specialized interviewing of Dr. Scott Williams of Rochester Institute of Technology and Professor Nancy Cullins from Cal Poly. The second form of research was a common, yet useful, method called secondary research. This entailed looking at recent written research papers about …

Dc-Dc Converter For Harvesting Energy From An Exercise Bike, Henry Ureh, Chris Henry

Electrical Engineering

Create an efficient buck-boost converter that adapts to input voltage range from ~3.8V to 70V, and outputs 13.7V DC, the voltage required by a charge controller to charge a battery. The energy stored in the battery will be supplied back to the grid.

The cost of energy saved by the converter should eventually cover the initial price of the converter. The converter should help reduce the net power consumption of the exercise machines used in the Cal Poly gym

A Systematic Study On Structural And Optical Properties In Conjugated Polymer Photovoltaic Devices, Sri Sabarinadh Sunkavalli

Electrical & Computer Engineering Theses & Dissertations

Conjugated polymer/fullerene based solar cells represent an exciting alternative to inorganic ones because of their low production costs, flexibility and low weight. At present, commercialization of organic photovoltaic (OPV) cells is limited due to their relatively low efficiency in comparison to silicon ones. In order to understand the operation of OPV cells and to increase their efficiency, more information about the structure of the absorber layer is needed. In particular, the connection between structure and properties of the absorber layer is of great importance. Performance of bulk heterojunction organic solar cells based on poly (3-hexylthiophene) as donor and a soluble …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Monte Carlo Analysis Of Millimeter-Wave Gan Based Gunn Effect Oscillators, Sridhara Viswanadham

Electrical & Computer Engineering Theses & Dissertations

Gunn diodes are one of the most common high frequency solid-state oscillators at the present time, and are considered as promising devices for millimeter and submillimeter wave applications. Monte Carlo studies of Gunn diodes based on bulk wurtzite GaN have been carried out in this thesis research. Two structures have been examined: (i) devices with conventional single notch structure and (ii) repetitive structures with serial segments to fashion a "multiple domain" device. Wurtzite GaN has been chosen because of the high drift velocity and because analytical expressions for the band structure have recently become available. Performance parameters of interest such …

Cuin1-Xalxse2 Thin Films And Solar Cells, P. D. Paulson, M. W. Haimbodi, S. Marsillac, R. W. Birkmire, W. N. Shafarman

Electrical & Computer Engineering Faculty Publications

CuIn[sub 1-x]Al[sub x]Se[sub 2] thin films are investigated for their application as the absorber layer material for high efficiency solar cells. Single-phase CuIn[sub 1-x]Al[sub x]Se[sub 2] films were deposited by four source elemental evaporation with a composition range of 0≤x≤0.6. All these films demonstrate a normalized subband gap transmission >85% with 2 µm film thickness. Band gaps obtained from spectroscopic ellipsometry show an increase with the Al content in the CuIn[sub 1-x]Al[sub x]Se[sub 2] film with a bowing parameter of 0.62. The structural properties investigated using x-ray diffraction measurements show a decrease in lattice spacing as the Al content increases. …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …