Engineering Commons^™

Stress Generation In Ni50.3Ti29.7Hf20 Shape Memory Alloys, Utsav Shah

Theses and Dissertations--Mechanical and Aerospace Engineering

Shape memory alloys such as NiTiHf and NiTi have the ability to generate large recovery stresses when they are constrained after pre-straining and then heated above their Austenite Finish Temperature (A_f). In this work Ni_49.9Ti_50.1 (at.%), the most well-known SMA with impressive shape memory properties but limited temperature range and Ni_50.3Ti_29.7Hf₂₀, a promising high temperature shape memory alloy, were characterized to reveal their stress generation capabilities. The effects of pre-straining on stress generation were investigated via martensite reorientation method of NiTi and NiTiHf alloys by loading the samples till …

Filtered-Dynamic-Inversion Control For Unknown Minimum-Phase Systems With Unknown Relative Degree, Sumit Suryakant Kamat

Theses and Dissertations--Mechanical and Aerospace Engineering

We present filtered-dynamic-inversion (FDI) control for unknown linear time-invariant systems that are multi-input multi-output and minimum phase with unknown-but-bounded relative degree. This FDI controller requires limited model information, specifically, knowledge of an upper bound on the relative degree and knowledge of the first nonzero Markov parameter. The FDI controller is a single-parameter high-parameter-stabilizing controller that is robust to uncertainty in the relative degree. We characterize the stability of the closed-loop system. We present numerical examples, where the FDI controller is implemented in feedback with mathematical and physical systems. The numerical examples demonstrate that the FDI controller for unknown relative degree …

The Influence Of Cryogenic Machining On Surface Integrity And Functional Performance Of Titanium Alloys For Biomedical And Aerospace Applications, Ying Sun

Theses and Dissertations--Mechanical and Aerospace Engineering

The excellent properties of titanium alloys such as high strength, as well as good corrosion and fatigue resistance are desirable for the biomedical and aerospace industry. However, the same properties that make titanium alloys desirable in high-performance applications also make these space-age materials “difficult-to-machine” materials, as the titanium alloys exhibit high cutting temperatures because of their high strength and low thermal conductivity.

Cryogenic machining is a severe plastic deformation (SPD) processes which uses liquid nitrogen as the coolant to take away the heat generated during machining in a relatively short time. Cryogenic machining can significantly reduce the cutting temperatures at …

Influence Of Size Effects On Surface Generation During Finish Machining And Surface Integrity In Ti-6al-4v, Ian S. Brown

Theses and Dissertations--Mechanical and Aerospace Engineering

Finish machining is an essential manufacturing process that is used to enhance the mechanical characteristics of critical components. The deformation that occurs at the tool and workpiece interface in finish machining significantly affects a host of component properties, commonly referred to as “surface integrity” properties. Surface roughness is a machining deformation-affected characteristic that is of high relevance in contemporary manufacturing. However, over recent decades it has been made clear that the material properties of the deformed surface layers are relevant to component performance as well. Predicting the overall surface quality of a machined component is of great relevance to the …

Safety Concepts For Every Ride: A Statistical Ensemble Simulation To Mitigate Rotational Falls In Eventing Cross Country, Shannon Wood

Theses and Dissertations--Mechanical and Aerospace Engineering

Rotational falls are the leading cause of death and serious injury in the equestrian sport of eventing. Previous studies to develop safety devices used physical models representing one or at most several physical situations leading to different designs and no common understanding. In this thesis, a statistical ensemble model is developed and applied to generate and evaluate 10,000 different situations that might potentially lead to rotational falls. For accurate statistical representation of the horse and rider inertia distributions, measurements of over 400 training or competing horses and riders were recorded and incorporated. Video was recorded of 218 total competitors approaching …

Capillary Flow Of Liquid Aluminum Alloy In Wetting And Wetting/Non-Wetting Systems, Yangyang Wu

Theses and Dissertations--Mechanical and Aerospace Engineering

In this dissertation, the capillary flow of liquid aluminum alloy in both wetting and wetting/non-wetting systems is investigated.

The impact of gravity and surface topography on the capillary flow has been studied in a wetting/non-wetting assembly (an AA3003/Al₂O₃ wedge-tee configuration). The research includes (i) kinetics of liquid Al-Si-K_xAl_yF_z alloy triple line movements and dynamic macro advancing and receding contact angles and (ii) free surface profiles of the molten alloy driven by surface tension and impacted by gravity. A trade-off between the surface tension and gravity force has been found by calculating the …

Flame Stabilization Of A Premixed Jet In Vitiated Coflow, Tyler Owens

Theses and Dissertations--Mechanical and Aerospace Engineering

Premixed staged combustion in gas turbine engines can reduce emissions by lowering peak flame temperatures but can also lead to different stability characteristics when compared to traditional combustors. High pressure ratio and subsequently high temperatures can lead to conditions suitable for both autoignition and premixed flame propagation in an environment where spatial fuel/air variations are present.

An experimental facility which issues a premixed jet into a coflowing vitiated mixture was studied to examine the stability behavior, resulting in a lifted flame. The effective ignition delay observed flame was much greater than homogeneous ignition delay calculations for the same conditions. It …

Development And Application Of Novel Sound Absorbers, Weiyun Liu

Theses and Dissertations--Mechanical and Aerospace Engineering

The sound absorbers in most common use today are porous materials like fibers and foams. This work examines three alternatives to porous absorbers: microperforated panels, acoustic fabrics, and additively manufactured absorbers. The research is a combination of design, measurement and characterization of their properties, and analysis.

Microperforated panels are thin metallic or plastic panels with sub-millimeter size holes or perforations. Sound absorption can be tuned by adjusting the spacing between the panel and a cavity behind the panel. Several different configurations were considered where the geometry behind the panel was divided up into channels of varying length and cross-sectional area. …

Development Of Micro-Scale High Aspect Ratio Patterned Features With Electroless Nickel Plating, Lorli Smith

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis describes a novel method designed to pattern high aspect ratio metallic microscale features using a modified photolithography and electroless nickel plating process. This method utilizes modified photolithography techniques to create a polymer mold that is used to control the location of metal deposition on substrate during electroless nickel plating. In order to generate high aspect ratio mold features, a multiple spin-step process was developed to deposit thick layers of SU-8 photoresist, and inclined lithography was also used to generate tapered sidewalls that could help aid mold removal after plating. Results from electroplating experiments were evaluated using a Zygo …

Development Of Universal Solver For High Enthalpy Flows Through Ablative Materials, Umran Duzel

Theses and Dissertations--Mechanical and Aerospace Engineering

Atmospheric entry occurs at very high speeds which produces high temperature around the vehicle. Entry vehicles are thus equipped with Thermal Protection Systems which are usually made of ablative materials. This dissertation presents a new solver that models the atmospheric entry environment and the thermal protection systems. In this approach, both the external flow and the porous heat shield are solved using the same computational domain. The new solver uses the Volume Averaged Navier-Stokes Equations adapted for hypersonic non-equilibrium flow, and is thus valid for both domains. The code is verified using analytical problems, set of benchmarks and also a …

Bacterial Cell Wall Characterization Via Atomic Force And Confocal Microscopy, Joree Sandin

Theses and Dissertations--Mechanical and Aerospace Engineering

Poor oral hygiene is a severe global health issue, with about 44% of the Earth’s population suffering from untreated tooth decay, accounting for over $100 billion dollars spent on dental services per year in the United States, alone. Manual treatments, such as brushing, flossing, or swishing with antiseptic rinse are the main ways to alleviate harmful bacteria that cause these oral health problems. Streptococcus mutans (S. mutans) is a group of highly antibiotic, Gram-positive bacteria that heavily contribute to oral cavities, plaque build-up, and potential loosening or loss of dental implants if a biofilm develops. Currently, the mechanism …

Carbon Oxidation At The Atomic Level: A Computational Study On Oxidative Graphene Etching And Pitting Of Graphitic Carbon Surfaces, Simon Schmitt

Theses and Dissertations--Mechanical and Aerospace Engineering

In order to understand the oxidation of solid carbon materials by oxygen-containing gases, carbon oxidation has to be studied on the atomic level where the surface reactions occur. Graphene and graphite are etched by oxygen to form characteristic pits that are scattered across the material surface, and pitting in turn leads to microstructural changes that determine the macroscopic oxidation behavior. While this is a well-documented phenomenon, it is heretofore poorly understood due to the notorious difficulty of experiments and a lack of comprehensive computational studies. The main objective of the present work is the development of a computational framework from …

Fabrication And Characterization Of Nickel Plated Micro-Resonators For Noncommutative Orientation Control In Microrobots, Marc Manheim

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis describes a procedure for fabricating arrays of microstructures out of SU-8 photoresist and nickel, which was developed with the goal of yielding microrobots capable of 1D rotation byway of magnetically-induced beam vibration that could be used for non-commutative orientation control. Several multi-layer geometries were designed, fabricated, tested and refined. In this process, micro-adhesion of multiple SU-8 layers was also studied. A method for depositing nickel via electroless plating was also developed, tested and characterized. While no microrobots were shown to produce rotation, the final results included beams that were capable of magnetically-induced vibration when subjected to an AC …

Expanded Predictive Equation For Dc Arc-Flash Incident Energy In 125v Battery Systems, Austin Gaunce

Theses and Dissertations--Electrical and Computer Engineering

Arc-flash is a dangerous phenomenon that can occur during an arcing fault in an electrical system. People nearby may be subjected to extreme heat, light, pressure, and sound. Research regarding arc-flash has focused primarily on AC arc-flash due to the prevalence of AC electricity in the grid. However, the grid has begun to integrate more DC electrical sources as a result of decentralization efforts and environmental concerns. The increased proliferation of DC electrical sources demands research into DC arc-flash to assess the hazard as low-voltage DC sources have already become commonplace. Some DC arc-flash models have been produced to estimate …

Ecosystem Of Bagged Grain Stored Under Naturally Ventilated Warehouse: Analysis And Modelling, Michael Ayodele Omodara

Theses and Dissertations--Biosystems and Agricultural Engineering

Grain in Africa and indeed most developing parts of the world are stored in polypropylene or jute bags arranged in stacks of varied dimensions in naturally ventilated warehouses. This practice is, however, associated with high postharvest losses due to poor temperature and moisture management during storage. This constitutes a major economic and food security challenge in these countries. Therefore, this study characterizes changes in moisture content and temperature occurring in a stack of bagged corn by determining the permeability of bag materials that influence moisture transfer and developing a mathematical model of heat and mass transfer which incorporates the unique …

Characterizing And Predicting The Antimicrobial Properties Of Lignin Derivatives, Ryan Kalinoski

Theses and Dissertations--Biosystems and Agricultural Engineering

Due to the overuse of antibiotics in our society, there has been a steady rise in highly antimicrobial-resistant bacteria in the last decade. This has created a renewed interest in natural phenolic compounds for antimicrobial discovery amongst the scientific community. To this end, lignin is the most abundant naturally occurring phenolic polymer on earth and has already been known to have antimicrobial properties due to its polyphenolic structure. In addition, lignin is considered a major waste product for lignocellulosic biorefineries, and its valorization into value-added products will generate extra profit for a biorefinery, making biofuels less expensive, increasing their marketability …

Physicochemical Characterization, Structural Determination, And Molecular Dynamic Modeling Of Proso Millet Proteins For Enhanced Food Functionality, Felix Akharume

Theses and Dissertations--Biosystems and Agricultural Engineering

More than one-third of Americans today incorporate plant-based protein into their diet and about 40% believed that plant-based protein is healthier than animal protein, especially Millennials. The increasing global demand for plant-based proteins driven by the high cost of animal proteins, consumers’ desire for lean protein, vegetarianism, and the need for more sustainable green protein products have necessitated research into alternate emerging and underutilized sources of protein to complement or supplement the major plant protein in the market- soy, pea, and gluten. Therefore, this dissertation is focused on the valorization of the proteins in proso millet. Specifically, this work focused …

Effects Of Watershed Disturbances And River-Tributary Confluences On Sedimentation Dynamics In The Upper Ohio River Basin, Ciara Pickering

Theses and Dissertations--Biosystems and Agricultural Engineering

Harmful algal blooms (HABs) are of increasing concern in the Ohio River Basin. Fine sediment dynamics in riverine environments are increasingly recognized to play important roles in proliferation and toxicity of Microcystis blooms. Further, the fate of sediment at confluences of tributaries and the main river system are important zones for sediment retention and transient storage. The objective of this study was to improve understanding of watershed sediment loading dynamics and backwater inundation influencing sedimentation within confluence watersheds. The study site is the Fourpole Creek watershed in Huntington, WV which is a disturbed forested watershed impacted by a backwater confluence …

The Optimum Design Of A Vacuum-Compatible Manipulator To Calibrate Space Based Ultraviolet Imagers, Jason L. Grillo

Master's Theses

Recent discoveries in geospace science have necessitated the design of compact UV imaging instruments to make space-based observations from multiple vantage points. The miniaturized ultraviolet imager (MUVI) instrument from the Space Sciences Laboratory (SSL) at UC Berkeley is under development to facilitate such discoveries on a wider scale. This thesis documents the design, integration, and characterization of a vacuum compatible manipulator to calibrate the MUVI instrument inside the UV thermal vacuum chamber at SSL. Precision linear and rotation stages were implemented with custom mounting plates to achieve four degrees of freedom. Optical components were installed to imitate the MUVI instrument …

Opendrop Software Development, Jiajun Guan

Electrical Engineering

To be able to transfer and mix solutions more efficiently and accurately during biology experiments, the Electrical Engineering department at Cal Poly University is planning to purchase or engineer the OpenDrop device. The OpenDrop device uses electro-wetting technology to control the movement of small droplets of water on a planar electrode array to transport and mix different solutions. This device is an open-source project and could be purchased online through the GaudiLab. The basic code of the system could be found in GitHub. With this code as a reference, the goal of this senior project is to develop the firmware, …

Organophosphorus-Hydrazides As Potential Reactive Flame Retardants For Epoxy, Alexander B. Morgan, Vladimir Benin, Donald A. Klosterman, Abdulhamid Bin Sulayman, Mustafa Mukhtar, Mary L. Galaska

Chemical and Materials Engineering Faculty Publications

For structural composites used in vehicles and aircraft, flame retardant chemistries which enhance char formation and reduce heat release are preferred. Phosphorus-based and phosphorus–nitrogen flame retardants for epoxies have been well studied to date, but phosphorus hydrazides have not been studied for their flame-retardant potential in epoxy. These hydrazides offer some novel structures and they can potentially offer a combination of vapor and condensed phase flame retardant action. A series of eight compounds were systematically investigated in this study as reactive flame retardants in a bisphenol F epoxy/aliphatic amine resin system at a level of 2.5 wt% phosphorus. Results suggest …

Improving Air Pollution Exposure Estimation Using Cell Phone Location Data And Low-Cost Sensors, Xiaonan Yu

Electronic Theses and Dissertations, 2020-2023

Human exposure estimation to air pollution plays an important role in epidemiological studies which are designed to reveal correlations between human exposures to certain air pollutants and certain diseases, such as asthma, cardiovascular disease and reproductive diseases. Traditionally, when people's mobile data is hard to get, home location is used to estimate people's exposures assuming that people stay at home all the time. Whereas, people move and it is more accurate to estimate people's exposures including people's mobility. In our study, we showcased two methods to obtain people's mobile data: Google Maps location history (GMLH) data and Call Detailed Record …

Provably Trustworthy And Secure Hardware Design With Low Overhead, Qutaiba Alasad

Electronic Theses and Dissertations, 2020-2023

Due to the globalization of IC design in the semiconductor industry and outsourcing of chip manufacturing, 3PIPs become vulnerable to IP piracy, reverse engineering, counterfeit IC, and hardware Trojans. To thwart such attacks, ICs can be protected using logic encryption techniques. However, strong resilient techniques incur significant overheads. SCAs further complicate matters by introducing potential attacks post-fabrication. One of the most severe SCAs is PA attacks, in which an attacker can observe the power variations of the device and analyze them to extract the secret key. PA attacks can be mitigated via adding large extra hardware; however, the overheads of …

Subsurface Characterization Of Internally Eroded Soils In Karst Using The Cone Penetration Test, Ryan Shamet

Electronic Theses and Dissertations, 2020-2023

Sinkholes are a major geohazard with life-threatening consequences when not properly detected and mitigated. Geologic conditions comprised of soluble bedrock (e.g., limestone or other carbonate-based lithologies) overlain by fine-grained sandy and clayey soils, are known internationally as "karst topography" and is generally characterized by such sinkholes, caves, sinking streams, and highly variable groundwater flow conditions. Karst sinkholes, however, are complex geohazards and are difficult to precisely characterize through geotechnical considerations alone. Deterministic methods (e.g., analytical and numerical solutions) may provide for a more robust analysis of internal soil erosion (known as soil raveling) but have limitations for the practical use …

Theoretical Investigation Of The Low Frequency Fundamental Mechanism Of The Objective Occlusion Effect Induced By Bone-Conducted Stimulation, Kevin Carillo, Olivier Doutres, Franck Sgard

Études primaires

The objective occlusion effect induced by bone-conducted stimulation refers to the low frequency acoustic pressure increase that results from occluding the ear canal opening. This phenomenon is commonly interpreted as follows: the bone-conducted sound “leaks” through the earcanal opening and is “trapped” by the occlusion device. This instinctive interpretation misrepresents the fundamental mechanism of the occlusion effect related to the earcanal impedance increase and already highlighted by existing electro-acoustic models. However, these models simplify the earcanal wall vibration (i.e., the origin of the phenomenon) to a volume velocity source which, in the authors' opinion, (i) hinders an exhaustive comprehension of …

Physiological Effects During Aerobatic Flights On Science Astronaut Candidates, Pedro Llanos, Diego M. Garcia

Publications

Spaceflight is considered the last frontier in terms of science, technology, and engineering. But it is also the next frontier in terms of human physiology and performance. After more than 200,000 years humans have evolved under earth’s gravity and atmospheric conditions, spaceflight poses environmental stresses for which human physiology is not adapted. Hypoxia, accelerations, and radiation are among such stressors, our research involves suborbital flights aiming to develop effective countermeasures in order to assure sustainable human space presence. The physiologic baseline of spaceflight participants is subject to great variability driven by age, gender, fitness, and metabolic reserve. The objective of …

Physiological Effects On Scientist Astronaut Candidates: Hypobaric Training Assessment, Pedro Llanos, Diego Garcia

Publications

This paper is addressed to expanding our understanding of the effects of hypoxia training on our bodies to better model its dynamics and leverage some of its implications and effects on human health. Hypoxia training is a recommended practice for military and civilian pilots that allow them to recognize their early hypoxia signs and symptoms, and Scientist Astronaut Candidates (SACs) who underwent hypobaric hypoxia (HH) exposure as part of a training activity for prospective suborbital flight applications. This observational-analytical study describes physiologic responses and symptoms experienced by a SAC group before, during and after HH exposure and proposes a model …

Language Education For Ab Initio Flight Training: A Plan Going Forward, Jennifer Roberts, Alan Orr

Publications

English language proficiency for the aviation industry is a critical issue given the industry’s growth in regions of the world where English is not a first or a national language. This chapter discusses language training for ab initio flight students who will comprise much of the next generation of aviation professionals (NGAP). It describes aviation English as a form of English for Specific Purposes (ESP), and the language skills required for flight school contexts where English is the Medium of Instruction (EMI). The chapter advocates for the assessment of incoming ab initio flight school students using a tool adapted from …

Automated Testing And Bug Reproduction Of Android Apps, Yu Zhao

Theses and Dissertations--Computer Science

The large demand of mobile devices creates significant concerns about the quality of mobile applications (apps). The corresponding increase in app complexity has made app testing and maintenance activities more challenging. During app development phase, developers need to test the app in order to guarantee its quality before releasing it to the market. During the deployment phase, developers heavily rely on bug reports to reproduce failures reported by users. Because of the rapid releasing cycle of apps and limited human resources, it is difficult for developers to manually construct test cases for testing the apps or diagnose failures from a …

Coverage Guided Differential Adversarial Testing Of Deep Learning Systems, Jianmin Guo, Houbing Song, Yue Zhao, Yu Jiang

Publications

Deep learning is increasingly applied to safety-critical application domains such as autonomous cars and medical devices. It is of significant importance to ensure their reliability and robustness. In this paper, we propose DLFuzz, the coverage guided differential adversarial testing framework to guide deep learing systems exposing incorrect behaviors. DLFuzz keeps minutely mutating the input to maximize the neuron coverage and the prediction difference between the original input and the mutated input, without manual labeling effort or cross-referencing oracles from other systems with the same functionality. We also design multiple novel strategies for neuron selection to improve the neuron coverage. The …