Engineering Commons^™

Swarm-Based Design Of Proportional Integral And Derivative Controllers Using A Compromise Cost Function: An Arduino Temperature Laboratory Case Study, Paulo De Moura Oliveira, John Hedengren, Eduardo Solteiro Pires

Faculty Publications

Simple and easy to use methods are of great practical demand in the design of Proportional, Integral, and Derivative (PID) controllers. Controller design criteria are to achieve a good set-point tracking and disturbance rejection with minimal actuator variation. Achieving satisfactory trade-offs between these performance criteria is not easily accomplished with classical tuning methods. A particle swarm optimization technique is proposed to design PID controllers. The design method minimizes a compromise cost function based on both the integral absolute error and control signal total variation criteria. The proposed technique is tested on an Arduino-based Temperature Control Laboratory (TCLab) and compared with …

The Effect Of Guide Vane Opening Variations And Total Blades On Cross Flow Turbine Performance Using Computational Fluid Dynamic, Muhamad Akbar Navis, Heru Suryanto, Putut Murdanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia is an agrarian country that continuously produces water, so it has the potential to develop a hydroelectric power plant. Computational Fluid Dynamic (CFD) application could be used to be an economical, quick, and efficient approach to improve the engineering design and turbine performance. This research aimed to find the effect of guide vane opening variations and total blades on cross-flow turbine performance using CFD simulation. This research used experimental modelling method with ANSYS program for turbine design with 22, 24, and 26 turbine blades and guide vane opening variations of 12°, 16°, 20°, 24°, and 36°. The data were …

Energy And Exergy Efficiency Of Double Slope Passive Solar Still, Jandri Fan Ht Saragi, Wawan Septiawan Damanik

Journal of Mechanical Engineering Science and Technology (JMEST)

Solar desalination functions to filter water, both sea water and brackish water, to produce clean water that is fit for consumption with energy from the sun. Solar energy is a renewable energy source that has been widely studied for its use. One of its uses is in a double slope passive solar still where the sun is the main source. Energy and exergy obtained from solar energy are not all used to evaporate water in the desalination system, so it is necessary to calculate efficiency energy and exergy in the system. This study aims to obtain data on the amount …

Characteristics Biolubricant Enriched With Nanoparticle Additives: A Review, Zhahra Hanif Sholiha, Gaguk Jatisukamto

Journal of Mechanical Engineering Science and Technology (JMEST)

The engine movement mechanism is a system composed of machine elements that contact or rub against each other between these surfaces. Surfaces that rub against each other will cause a friction force that causes wear on the surface, so it requires energy to fight the friction force. Lubricants are needed to reduce friction and reduce wear rates, where lubricants are generally made of mineral materials. Lubricants made from synthetic materials are non-renewable and cause environmental problems. The development of biolubricants as lubricating materials based on animal fats or vegetable oils is continuously being carried out. This study aims to observe …

Optimization Of Stir Casting Of Aluminum Matrix Composites (Amcs) With Filler Of Recycled Glass Powder (Rgp) For The Mechanical Properties, Yusup Hendronursito, Tumpal Ojahan, Anang Anshori, Asep Yunanto

Journal of Mechanical Engineering Science and Technology (JMEST)

A study of making Aluminum Matrix Composites (AMCs) uses recycled glass powder (RGP) as a filler has been carried out through the stir casting process. The experimental design uses the Taguchi method of 3^3 orthogonal array L9 with the parameters of powder size (20>x> 80, 80>y> 200, 200>z> 325), percentage of filler vs matrix (2%, 7%, 12%), and stirring time (30 Seconds, 3 Minutes, 12 Minutes). The optimum conditions for the hardness of Al-GRp composites were obtained from specimens with Mesh powder size parameters 200> z> 325, the percentage of glass vs aluminum powder was 12% wt, …

Surface Properties And Adsorption Capacities Of Rice Bran-Activated Carbon, Dewa Ngakan Ketut Putra Negara, Tjokorda Gde Tirta Nindhia, Wayan Nata Septiadi

Journal of Mechanical Engineering Science and Technology (JMEST)

The growing need for activated carbon requires alternative raw materials to replace non-renewable raw materials whose existence is decreasing. Biomass is a very promising precursor, one of which is from rice bran. This research concerns the development of activated carbon derived from rice bran. Carbonization was carried out at 600 OC and physically activated with nitrogen flow rates of 150 mL/min for 40, 80, and 120 minutes. The activated carbons produced (AC-D40, AC-D80, and AC-D120) were characterized to determine the surface properties, surface morphology, and adsorption capacity for nitrogen and blue methylene adsorptions. The results showed that activated carbon that …

Design Of Savonius Vertical Axis Wind Turbine For Vehicle, Filian Arbiyani, Fernando Pranata Lasut

Journal of Mechanical Engineering Science and Technology (JMEST)

The use of cellular phones is increasing in society, but due to the limited battery capacity of cell phones, it is necessary to charge the battery when travelling in the long distances. The Savonius type wind turbine has a potential as an energy source harvesting the wind energy flowing around the car. However, due to the available space on the car, careful design of Savonius vertical axis wind turbine for vehicle is necessary. The research is conducted numerically using MATLAB software. The wind speed, Reynolds number, and electric power output are numerically simulated to obtain the swept area design. Innovative …

New Design Of Aluminum 6061 Welding Joining Using Friction Stir Welding Method, Widia Setiawan, Nugroho Santoso, Surojo Surojo

Journal of Mechanical Engineering Science and Technology (JMEST)

Parallel, lap, corner, and T joints are commonly used in fusion welding and solid welding. Other joints made are lap and butt joint. This study aims to evaluate a new design of fitting model single U and double U for friction stirr welding of Aluminum. Aluminum sheet 6061with a thickness of 10 mm, will be cut to a length of 150 mm and a width of 100 mm, then a locking groove will be made with an inner size of 5 mm and a length of 150 mm The flow is used to be paired in the FSW process. This …

Tool Life Prediction Of Ti [C,N] Mixed Alumina Ceramic Cutting Tool Using Gradient Descent Algorithm On Machining Martensitic Stainless Steel, Joseph Daniel S, Senthil Kumar A

Journal of Mechanical Engineering Science and Technology (JMEST)

In automated manufacturing systems, most of the manufacturing processes, including machining, are automated. Automatic tool change is one of the important parameters for reducing manufacturing lead time. Machining studies on Martensitic Stainless Steel was conducted using Ti[C,N] mixed alumina ceramic cutting tool. Tool life was evaluated using flank wear criterion. The tool life obtained from experimental machining process was taken as training dataset and test dataset for machine learning. Tool life model was developed using Gradient Descent Algorithm. The accuracy of the machine learning model was tested using the test data, and 99.83% accuracy was obtained.

Moisture Reduction Of Honey In Dehumidification And Evaporation Processes, Anang Lastriyanto, Sasongko Aji Wibowo, Erwan Erwan, Firman Jaya, Jati Batoro, Dewi Masyithoh, J.S.A Lamerkabel

Journal of Mechanical Engineering Science and Technology (JMEST)

The high water content of honey can lead to fermentation and accelerate the deterioration of honey. One way to prevent fermentation in honey is to reduce the water content of honey. There are several ways to reduce the water content of honey, namely through a dehumidifier and evaporation. This study aimed to examine the relationship of reduced water content towards time in between dehumidifier and evaporation processes. The research method uses an exponential equation model to determine the value of the constant (K). The constant value (K) is used to predict the rate of reduction in moisture content between the …

Designing Next-Generation Transportation Systems With Emerging Vehicle Technologies, Zhiwei Chen

USF Tampa Graduate Theses and Dissertations

Recent advances in computing and artificial intelligence have enabled the development of various emerging vehicle technologies, e.g., autonomous vehicles (AV) and modular autonomous vehicles (MAV). These technologies bring new scientific and engineering problems challenging transportation researchers and practitioners. This dissertation aims to develop a suite of scalable computational and analytical tools for designing and analyzing next-generation transportation systems with the MAV technologies. Also, we intend to empirically study the system impacts in terms of the quality of service, energy implications, and inequality impacts.

For MAV system design, we develop a methodological framework centering at theoretical properties of the optimal system …

Methodologies To Quantify Transit Performance Metrics At The System-Level Using High-Resolution Gps, Stop-Level, And Gtfs Archived Transit Data, Travis Bradley Glick

Dissertations and Theses

Performance metrics have typically focused at two main scales: a microscopic scale that focuses on specific locations, time-periods, and trips; and, a macroscopic scale that averages metrics over longer times, entire routes, and networks. When applied to entire transit systems, microscopic methodologies often have computational limitations while macroscopic methodologies ascribe artificial uniformity to non-uniform analysis areas. These limitations highlight the need for a middle approach.

This dissertation presents a mesoscopic analysis based around timepoint-segments, which are a novel application of an existing system for many transit agencies. For this research, routes are divided into a consecutive group of bus stops …

Biomechanical Comparison Of The Validity Of Two Configurations Of Simulators For Body-Powered Hand Prostheses, Camille Bennett, Amanuel Matias, Brendan Smith, Jenevieve Roper, Stephen Estelle

Honors Thesis

Simulators are often used in prosthesis research to evaluate new devices or characterize aspects of prosthesis use, so as to recruit participants without amputations. Simulators, in general, must locate the prosthesis somewhere other than where the intact biological limb exists. In this study, we compared two configurations of simulators for hand prostheses to determine which leads to more natural elbow and shoulder kinematics, and in turn, which is the more valid simulator. One configuration located the prosthesis in-line with the forearm, beyond the biological hand; the other located it beside the hand. We measured the kinematics of 12 non-amputee participants …

Pedagogy Of The Pandemic: A Case Study Of Emergency Remote Education In A Private Higher Education Institution In Egypt, Rania M Rafik Khalil, Shadia Fahim, Wadouda Badran, Hadia Fakhreldin, Maguid Hassan, Hani Ghali, Attia Attia, Sarah Khalil, Hassan Abdelhamid, Yasmine Abdel Moneim, Omar H. Karam

English Language and Literature

COVID19 caught almost every higher education institution off guard. The pandemic interrupted the teaching and learning process and required immediate implementation of emergency remote learning strategies. Teaching pedagogy turned to new ways of thinking about learning. Consequently, both academic staff and students had to adapt without warning to the challenges of teaching with advanced technology from home which was taking the world by storm. Overcoming this challenge in Egypt has been much easier for private universities in comparison to state universities because of the availability of facilities, funding, smaller cohorts and validation by partner western universities. This paper shares reflections …

Review Of Γ’ Rafting Behavior In Nickel-Based Superalloys: Crystal Plasticity And Phase-Field Simulation, Zhiyuan Yu, Xinmei Wang, Fuqian Yang, Zhufeng Yue, James C. M. Li

Chemical and Materials Engineering Faculty Publications

Rafting is an important phenomenon of the microstructure evolution in nickel-based single crystal superalloys at elevated temperature. Understanding the rafting mechanism and its effect on the microstructure evolution is of great importance in determining the structural stability and applications of the single crystal superalloys. Phase-field method, which is an excellent tool to analyze the microstructure evolution at mesoscale, has been gradually used to investigate the rafting behavior. In this work, we review the crystal plasticity theory and phase-field method and discuss the application of the crystal plasticity theory and phase-field method in the analysis of the creep deformation and microstructure …

The Economics Of Classroom 3-D Printing Of Open-Source Digital Designs Of Learning Aids, Nicole Gallup, Joshua M. Pearce

Michigan Tech Publications, Part 1

While schools struggle financially, capital for purchasing physical learning aids is often cut. To determine if costs could be reduced for learning aids, this study analyzed classroom-based distributed digital manufacturing using 3-D printing of open-source learning aid designs. Learning aid designs are analyzed in detail for their economic viability considering printing and assembly costs with purchased components and compared to equivalent or inferior commercial products available on Amazon. The results show current open-source 3-D printers are capable of manufacturing useful learning aids and that doing so provides high economic savings in the classroom. Overall, the average learning aid would save …

Clearance Of Solid Household Waste With The Reception Of Alternative Types Of Energy Carriers, Rakhmatullayev F, Turabdhanov S

Technical science and innovation

The research is devoted to improving the technology of obtaining alternative types of energy carriers by applying methods of pyrolysis of unclaimed types of solid domestic wastes of biological origin, which also allow solving the tasks of improving the ecological situation in the places of formation. The practical value and relevance of this research lies in the development of advanced technology for obtaining alternative fuels. The proposed pyrolysis unit allows producing gaseous and liquid hydrocarbons in a continuous cycle. In the atmosphere of the gasifying agent (air, oxygen, water vapor, carbon dioxide or their mixture), the gasification process is primarily …

Improvement Of Light Intensity And Efficiency Of N-Zno/Nio/P-Gan Heterojunction-Based White Light Emitting Diodes Using Micro-/Nanolens Array, Apurba Adhikary, Md Shamim Ahsan, Md Mahbub Hossain, Md Bipul Hossain, S. H. Shah Newaz, Farid Ahmed, Ik-Bu Sohn

Manufacturing & Industrial Engineering Faculty Publications

Our study proposes a technique to enhance light extraction efficiency of light emitting diodes (LEDs) by incorporating various micro-/nanolens arrays (MNLAs) on the substrate layer, which in turn increases the external quantum efficiency (EQE) of the LEDs. To simulate the LEDs, we utilized the finite difference time domain method. To achieve a white LED, we inserted a thin layer of NiO at the interface between the n-type ZnO and the p-type GaN. The basic n-ZnO/NiO/p-GaN heterojunction-based LED exhibited an EQE of 10.99% where the effective refractive index of the LED structure was 1.48. The EQE was further increased by engraving …

A First Investigation Of Agriculture Sector Perspectives On The Opportunities And Barriers For Agrivoltaics, Alexis Pascaris, Chelsea Schelly, Joshua M. Pearce

Michigan Tech Publications, Part 1

Agrivoltaic systems are a strategic and innovative approach to combine solar photovoltaic (PV)-based renewable energy generation with agricultural production. Recognizing the fundamental importance of farmer adoption in the successful diffusion of the agrivoltaic innovation, this study investigates agriculture sector experts’ perceptions on the opportunities and barriers to dual land-use systems. Using in-depth, semistructured interviews, this study conducts a first study to identify challenges to farmer adoption of agrivoltaics and address them by responding to societal concerns. Results indicate that participants see potential benefits for themselves in combined solar and agriculture technology. The identified barriers to adoption of agrivoltaics, however, include: …

Water Conservation Potential Of Self-Funded Foam-Based Flexible Surface-Mounted Floatovoltaics, Kaomi Soulemane Hayibo, Pierce Mayville, Ravneet Kaur Kailey

Michigan Tech Publications, Part 1

A potential solution to the coupled water–energy–food challenges in land use is the concept of floating photovoltaics or floatovoltaics (FPV). In this study, a new approach to FPV is investigated using a flexible crystalline silicon-based photovoltaic (PV) module backed with foam, which is less expensive than conventional pontoon-based FPV. This novel form of FPV is tested experimentally for operating temperature and performance and is analyzed for water-savings using an evaporation calculation adapted from the Penman–Monteith model. The results show that the foam-backed FPV had a lower operating temperature than conventional pontoon-based FPV, and thus a 3.5% higher energy output per …

Comparative Analysis Of Extreme Verification Latency Learning Algorithms, Muhammad Umer, Robi Polikar

Henry M. Rowan College of Engineering Departmental Research

One of the more challenging real-world problems in computational intelligence is to learn from non-stationary streaming data, also known as concept drift. Perhaps even a more challenging version of this scenario is when -- following a small set of initial labeled data -- the data stream consists of unlabeled data only. Such a scenario is typically referred to as learning in initially labeled nonstationary environment, or simply as extreme verification latency (EVL). Because of the very challenging nature of the problem, very few algorithms have been proposed in the literature up to date. This work is a very first effort …

Bibliometric Analysis Of Firefly Algorithm Applications In The Field Of Wireless Sensor Networks, Anupkumar M. Bongale Dr., Rahul Raghvendra Joshi Prof., Kalyani Dhananjay Kadam Prof.

Library Philosophy and Practice (e-journal)

Wireless Sensor Network is a network of wireless sensor nodes that are capable of sensing information from their surroundings and transmit the sensed information to data collection point known as a base station. Applications of wireless sensor networks are large in number and forest fire detection, landslide monitoring, etc. are few applications to note. The research challenges in wireless sensor networks is the transmission of data from the sensor node to the base station in an energy-efficient manner and network life prolongation. Cluster-based routing techniques are extensively adopted to address this research challenge. Researchers have used different metaheuristic and soft …

Under Frequency Load Shedding Scheme For Islanded Distribution System Based On Mixed Integer Linear Programming, Sohail Sarwar

Student Works (2020-2029)

In recent years, significant climate changes have pivoted the distribution system towards utilization of renewable energy, particularly through distributed generators (DGs). Although DGs offer many benefits, its integration affects the stability of the system, which could lead to blackout, when the grid is disconnected. The system frequency will drop drastically if DG’s generation capacity is less than the total load demand in the network. In order to sustain the system stability, Under Frequency Load Shedding (UFLS) is a commonly used technique to minimize the difference in load demand and power generation. However, existing load shedding techniques are lack in accurate …

Sustainable Drug Release From Polycaprolactone Coated Chitin‑Lignin Gel Fibrous Scaffolds, Turdimuhammad Abdullah, Kalamegam Gauthaman, Azadeh Mostafavi, Ahmed Alshahrie, Numan Salah, Pierfrancesco Morganti, Angelo Chianese, Ali Tamayol, Adnan Memic

Department of Mechanical and Materials Engineering: Faculty Publications

Non-healing wounds have placed an enormous stress on both patients and healthcare systems worldwide. Severe complications induced by these wounds can lead to limb amputation or even death and urgently require more effective treatments. Electrospun scaffolds have great potential for improving wound healing treatments by providing controlled drug delivery. Previously, we developed fibrous scaffolds from complex carbohydrate polymers [i.e. chitin-lignin (CL) gels]. However, their application was limited by solubility and undesirable burst drug release. Here, a coaxial electrospinning is applied to encapsulate the CL gels with polycaprolactone (PCL). Presence of a PCL shell layer thus provides longer shelf-life for the …

Compact Low-Cost Fiberless Diffuse Speckle Contrast Flow-Oximeter, Guoqiang Yu, Chong Huang, J. Todd Hastings

Biomedical Engineering Faculty Patents

A low-cost compact fiberless diffuse speckle contrast flow-meter includes a small laser diode and a 2-dimensional imaging device such as a charge coupled device (CCD) or complementary metal oxide semiconductor (CMOS) for directly contacting the tissue and measuring a parameter such as blood flow in a deep/thick volume of tissue (up to 10 mm depth). The small laser diode is fixed at a certain distance (0 to 20 mm) from the imaging device and directly contacts the tissue. Light emitted from the laser diode penetrates through the tissue and reflects back to the imaging device without passing through any lenses …

Power-Weighted Lpc Formant Estimation, Ruairí De Fréin

Conference papers

A power-weighted formant frequency estimation procedure based on Linear Predictive Coding (LPC) is presented. It works by pre-emphasizing the dominant spectral components of an input signal, which allows a subsequent estimation step to extract formant frequencies with greater accuracy. The accuracy of traditional LPC formant estimation is improved by this new power-weighted formant estimator for different classes of synthetic signals and for speech. Power-weighted LPC significantly and reliably outperforms LPC and variants of LPC at the task of formant estimation using the VTR formants dataset, a database consisting of the Vocal Tract Resonance (VTR) frequency trajectories obtained by human experts …

Hexakis Icosahedron Frame-Skin Vacuum Lighter Than Air Vehicle, Brian Cranston, Anthony N. Palazotto

AFIT Patents

A vacuum lighter than air vehicle (VLTAV) includes a rigid frame of rods connected together to form a hexakis icosahedron. A membrane skin covers the rigid frame and defines therewith a vessel configured to hold an internal vacuum that allows the vessel to float in the air. The plurality of rods and membrane skin have weights and dimensions that result in a neutral and/or positive buoyancy for the vessel while preventing geometric instability.

Measurements Of Ear-Canal Cross-Sectional Areas From Live Human Ears With Implications For Wideband Acoustic Immittance Measurements, Susan E. Voss, Nicholas J. Horton, Katherine E. Fairbank, Lu Xia, Lauren R. K. Tinglin, Kathryn D. Girardin

Engineering: Faculty Publications

Wideband acoustic immittance (WAI) measures are noninvasive diagnostic measurements that require an estimate of the ear canal’s area at the measurement location. Yet, physical measurements of the area at WAI probe locations are lacking. Methods to measure ear-canal areas from silicone molds were developed and applied to 169 subjects, ages 18–75 years. The average areas at the canal’s first bend and at 12mm insertion depth, which are likely WAI probe locations, were 63:4613:5 and 61:6613:5mm2, respectively. These areas are substantially larger than those assumed by current FDA-approved WAI measurement devices as well as areas estimated with acoustical methods or measured …

Chemical Interfacial Reactions Affecting The Speciation And Solubility Of Uranium In Organic-Rich Environments, Carmen A. Velasco

Civil Engineering ETDs

The aim of this dissertation was to investigate the interfacial reactions between uranium (U) and natural organic matter NOM) affecting the solubility, adsorption, and precipitation of U in organic-rich environments. The chemical interactions between U and NOM are not well understood, which justified the following research objectives: 1) Identify the effect of pH on U speciation and the organic functional chemistry in mineralized deposits from the Jackpile Mine.; 2) Identify the precipitation of U(VI) and NOM as a function of pH (2, 4 and 7); 3) Identify changes in DOM chemistry due to the reaction of NOM and U at …

A Systematic Literature Review With Bibliometric Meta-Analysis Of Deep Learning And 3d Reconstruction Methods In Image Based Food Volume Estimation Using Scopus, Web Of Science And Ieee Database, Prachi Kadam, Nayana Petkar, Shraddha Phansalkar Dr.

Library Philosophy and Practice (e-journal)

Purpose- Estimation of food portions is necessary in image based dietary monitoring techniques. The purpose of this systematic survey is to identify peer reviewed literature in image-based food volume estimation methods in Scopus, Web of Science and IEEE database. It further analyzes bibliometric survey of image-based food volume estimation methods with 3D reconstruction and deep learning techniques.

Design/methodology/approach- Scopus, Web of Science and IEEE citation databases are used to gather the data. Using advanced keyword search and PRISMA approach, relevant papers were extracted, selected and analyzed. The bibliographic data of the articles published in the journals over the past …