Engineering Commons^™

Hierarchical Routing Protocols For Wireless Sensor Network: A Compressive Survey, Hiu Fai Chan, Heiko Rudolph, Karina Gomez Chavez, Akram Hourani

Staff Publications

Wireless Sensor Networks (WSNs) are one of the key enabling technologies for the Internet of Things (IoT). WSNs play a major role in data communications in applications such as home, health care, environmental monitoring, smart grids, and transportation. WSNs are used in IoT applications and should be secured and energy efficient in order to provide highly reliable data communications. Because of the constraints of energy, memory and computational power of the WSN nodes, clustering algorithms are considered as energy efficient approaches for resource-constrained WSNs. In this paper, we present a survey of the state-of-the-art routing techniques in WSNs. We first …

Design And Installation Of Post-Installed Reinforcements: A State-Of-The-Art Review, Daniel T. W. Looi, Yuen Fai, Augustus Lee, Ray K. L. Su, Yanlong Zhang

Staff Publications

Post-installed reinforcement (PIR) helps facilitate retrofitting works, mitigate misplaced reinforcement problems, as well as support newly cast concrete members such as modular integrated construction. However, it has not been holistically addressed in major international reinforced concrete (RC) design codes. Nonetheless, based on established design philosophy and associated failure modes, the cast-in reinforcement design method in RC can be extended to design qualified PIR systems. The qualification of PIR system can be referenced to AC 308 (2016), European Assessment Document (EAD) 330087 (2018) and EAD 330499 (2017) in the US and Europe, respectively. In Hong Kong, PIR is conservatively limited to …

Graduate School Of Engineering And Management Catalog 2020-2021, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Three-Dimensional Characterization Of Peripapillary Retinal Pigment Epithelium-Basement Membrane Layer In Patients Following Lumbar Puncture, Junfei Tong, Pengfei Dong, Sachin Kedar, Deepta Ghate, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Purpose: To develop and test an innovative semi-automatic method for quantifying the three-dimensional morphology of the peripapillary retinal pigment epithelium-basement membrane (ppRPE/BM) layer, with application to lumbar puncture (LP) patients. Methods: Nineteen patients undergoing LP were recruited. The optic nerve head images of both eyes were acquired in 12 radial directions using optical coherence tomography (OCT) before and after LP. For each OCT image, the ppRPE/BM layer was automatically segmented with manual corrections by independent graders when necessary. The linear regression model of the ppRPE/BM layer was fitted using the least squares approach, and the ppRPE/BM layer angle was measured …

Roboticdeviceswithonboard Control And Related Systems And Devices, Shane Michael Farritor, Erik Mumm, Philip Chu, Nishant Kumar, Jason Dumpert, Yutaka Tsutano

Department of Mechanical and Materials Engineering: Faculty Publications

The embodiments disclosed herein relate to various medical device components, including components that can be incorporated into robotic and/or in vivo medical devices. Certain embodiments include various modular medical devices for in vivo medical procedures.

Comparative Analysis Of Single-Cell Transcriptomics In Human And Zebrafish Oocytes, Handan Can, Sree K. Chanumolu, Elena Gonzalez-Muñoz, Sukumal Prukudom, Hasan H. Otu, Jose Cibelli

Department of Electrical and Computer Engineering: Faculty Publications

Background: Zebrafish is a popular model organism, which is widely used in developmental biology research. Despite its general use, the direct comparison of the zebrafish and human oocyte transcriptomes has not been well studied. It is significant to see if the similarity observed between the two organisms at the gene sequence level is also observed at the expression level in key cell types such as the oocyte.

Results: We performed single-cell RNA-seq of the zebrafish oocyte and compared it with two studies that have performed single-cell RNA-seq of the human oocyte. We carried out a comparative analysis of genes expressed …

Cdc42-Dependent Transfer Of Mir301 From Breast Cancer-Derived Extracellular Vesicles Regulates The Matrix Modulating Ability Of Astrocytes At The Blood–Brain Barrier, Golnaz Morad, Cassandra C. Daisy, Hasan H. Otu, Towia A. Libermann, Simon T. Dillon, Marsha A. Moses

Department of Electrical and Computer Engineering: Faculty Publications

Breast cancer brain metastasis is a major clinical challenge and is associated with a dismal prognosis. Understanding the mechanisms underlying the early stages of brain metastasis can provide opportunities to develop efficient diagnostics and therapeutics for this significant clinical challenge. We have previously reported that breast cancer-derived extracellular vesicles (EVs) breach the blood–brain barrier (BBB) via transcytosis and can promote brain metastasis. Here, we elucidate the functional consequences of EV transport across the BBB. We demonstrate that brain metastasis-promoting EVs can be internalized by astrocytes and modulate the behavior of these cells to promote extracellular matrix remodeling in vivo. We …

Ieee Access Special Section Editorial: Green Signal Processing For Wireless Communicationsand Networking, Wen-Long Chin, David Shiung, Yi Qian, Woongsup Lee, Andres Kwasinki, Yansha Deng

Department of Electrical and Computer Engineering: Faculty Publications

No abstract provided.

Che 472-Hm2: Process And Plant Design Honors, Nellone Reid

Chemical and Materials Engineering Syllabi

No abstract provided.

Social Media Based Algorithmic Clinical Decision Support Learning From Behavioral Predispositions, Radhika V. Medury

Doctoral Dissertations

Behavioral disorders are disabilities characterized by an individual’s mood, thinking, and social interactions. The commonality of behavioral disorders amongst the United States population has increased in the last few years, with an estimated 50% of all Americans diagnosed with a behavioral disorder at some point in their lifetime. AttentionDeficit/Hyperactivity Disorder is one such behavioral disorder that is a severe public health concern because of its high prevalence, incurable nature, significant impact on domestic life, and peer relationships. Symptomatically, in theory, ADHD is characterized by inattention, hyperactivity, and impulsivity. Access to providers who can offer diagnosis and treat the disorder varies …

Civil Engineering Research In Ireland 2020: Conference Proceedings, Kieran Ruane, Vesna Jaksic, Bidisha Ghosh, Magdalena Hajdukiewicz, Ciaran Hanley, Niall Holmes, Jennifer Keenahan, Zili Li, Patrick Mcgetrick, Ted Mckenna, Mary Moloney, Vikram Pakrashi, Niamh Power

Publications

Civil Engineering Research in Ireland 2020: Conference Proceedings.

Role Of Interfacial Transition Zones In The Fracture Of Cu/V Nanolamellar Multilayers, Siyuan Wei, Shijian Zheng, Lifeng Zhang, Yue Liu, Jian Wang, Xianping Wang, Jiangwei Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Plastic deformation and fracture behavior of Cu/V nanoscale metallic multilayers (NMMs) were systematically investigated through in situ transmission electron microscopy testing. Two different types of interfaces: sharp interfaces and interfacial transition zones (ITZs), formed in the as-fabricated Cu/V NMMs. Upon deformation, sharp interfaces and ITZs exert distinct influences on the fracture behavior of Cu/V NMMs. Sharp interfaces can impede the crack propagation by deflecting the crack propagation and blunting the crack tip, while the ITZs can induce microcracks and facilitate the fracture process. These findings shed light on the important roles of interface structures in the deformation of a broad …

Nanoengineered Core-Shell Structures Using Tubile Halloysite Clay, Yusuf A. Darrat

Doctoral Dissertations

Halloysite nanotubes are a versatile nanomaterial that can be used in a wide variety of applications. They have a unique structure which could be described as a flat material that consists of silica on one side and alumina on the other; this structure is rolled up in a way naturally forming an internal 10-15 nm lumen and interlayer spacing. This could lead to many potential applications for example incorporating halloysite as a template material or as a support structure. They are an inexpensive clay material that is available in large quantities (thousands of tons), so they may be practically used …

Ce 432-102: Structural Steel Design, Raj Navalurkar

Civil and Environmental Engineering Syllabi

No abstract provided.

Mech 236-004: Engineering Mechanics: Dynamics, Rajib Moral

Civil and Environmental Engineering Syllabi

No abstract provided.

Mech 236-002: Engineering Mechanics: Dynamics, Rajib Moral

Civil and Environmental Engineering Syllabi

No abstract provided.

Thei Student Applied Research Presentations Sarp 2020, Research Office, Technological And Higher Education Institute Of Hong Kong

THEi Student Applied Research Presentations (SARP)

No abstract provided.

Building Information Modelling For Building Services Engineering: Benefits, Barriers And Conducive Measures, Wai Yee Betty Chiu, Joseph H.K. Lai

Faculty of Science & Technology (THEi)

Purpose – Mandating the use of building information modelling (BIM) in building projects has sprawled, but the uptake of BIM in building services engineering (BSE) remains sluggish. The purpose of this paper is to explore how to achieve wider adoption of BIM in BSE. Design/methodology/approach – Through an extensive literature review, the benefits of, barriers to and measures conducive to, using BIM for BSE were identified and classified. Built upon the review and a focus group meeting, a questionnaire was devised for an industry-wide survey in Hong Kong and the survey data were processed by statistical analyses. Findings – On …

Exploring The Nebraska Rural Poll, 2020, Rebecca Vogt, Cheryl A. Burkhart-Kriesel, Bradley Lubben, L.J. Mcelravy, Timothy Meyer, Steve Schulz, Jason L. Weigle

Rural Futures Institute: Publications

The Nebraska Rural Poll was initiated in 1996. Over the past 24 years, input has been gathered from over 64,000 nonmetropolitan Nebraskans. 102 separate reports have been produced covering 31 unique topics

Trend Analysis

Subgroup Comparisons

Some questions have been repeated at various intervals of time

Incorporating Cardiac Substructures Into Radiation Therapy For Improved Cardiac Sparing, Eric Daniel Morris

Wayne State University Dissertations

Growing evidence suggests that radiation therapy (RT) doses to the heart and cardiac substructures (CS) are strongly linked to cardiac toxicities, though only the heart is considered clinically. This work aimed to utilize the superior soft-tissue contrast of magnetic resonance (MR) to segment CS, quantify uncertainties in their position, assess their effect on treatment planning and an MR-guided environment.

Automatic substructure segmentation of 12 CS was completed using a novel hybrid MR/computed tomography (CT) atlas method and was improved upon using a 3-dimensional neural network (U-Net) from deep learning. Intra-fraction motion due to respiration was then quantified. The inter-fraction setup …

Computational Analysis Of Oxidative Stress In Endothelial Dysfunction: Insights On The Role Of Tetrahydrobiopterin, Ascorbate And Glutathione, Sheetal Kedar Panday

Wayne State University Dissertations

Oxidative stress and endothelial dysfunction are reported in the cardiovascular and neurovascular diseases. Oxidative stress is caused due to an increase in the generation of reactive oxygen (ROS) and nitrogen species (RNS) and incapacity of antioxidant systems to eliminate ROS and RNS. Endothelial dysfunction is characterized by a reduction in nitric oxide (NO) bioavailability. NO is constitutively produced by enzyme endothelial nitric oxide synthase (eNOS). A reduction in tetrahydrobiopterin (BH4), which is an essential cofactor of eNOS, can lead to eNOS uncoupling. There is complex interplay between the ROS/RNS and antioxidant system underlying pathophysiologies of vascular diseases, however our quantitative …

Nanoparticle-Mediated Controlled Myocardial Drug Delivery: A New Treatment For Hypertrophic Cardiomyopathy, Michelle Katherine Mcgrath Copeland

Bioengineering Dissertations - Archive

Hypertrophic cardiomyopathy (HCM) is a genetic disease of the sarcomere, resulting in overgrowth of the septum that separates the left and right ventricles. HCM can affect as many as 1/200 people, making it the most common genetic cardiomyopathy in the general population, as well as the most common cause of sudden cardiac death (SCD). In severe HCM cases, cardiothoracic surgeons perform septal myectomy to remove the excess tissue. However, many patients are poor surgical candidates and require another, less invasive treatment option. In these cases, alcohol septal ablation (ASA) is performed. With ASA, cardiologists deliver pure alcohol through a catheter …

Prosthetic Hand: Structure, Riley Smith, Riley Smith

All Undergraduate Projects

The objective of this project was to design the structure of a prosthetic hand that has articulating fingers and thumb in order to grip various objects. A design was developed that can add to the available options of prosthetics on the market.

In order to create a base hand for the project, the hand was modeled off of rough human hand dimensions. Analyses determined the feasible size of components. Once a base size was found the movement system in both grip and return form were developed and refined. With the parts being modeled in Solidworks and 3D printed, iterations of …

Electrathon Vehicle: Front Suspension, Christopher Clark

All Undergraduate Projects

Central Washington University does not currently have a competition field-able Electrathon America electric vehicle with adequate front suspension. The aim of this project was to provide the vehicle with handling that supports sound ground contact throughout the competition environment. Handling that supports sound ground contact is important for vehicles so they can go around corners without a loss of traction or flipping over. The solution to this engineering problem was designed and tested through various requirements. The requirements at hand were that the suspension components weigh less than 50 pounds, that there be no more than 3 inches of suspension …

Jcati Composite Delaminator, Payden Coffman

All Undergraduate Projects

Improvements need to be made to the existing delaminator system designed to crush proprietary Boeing 777 composite material. The current design incorporates a hydraulic system to achieve the high loads needed to separate material layers. The new system will need to be able to apply the same loads while at the same time allowing for a constant feed of material through the system. To achieve this, a “gear-like” crushing system will be implemented that will apply a high enough radial load into the material that will achieve delamination equal or greater than the previous design while at the same time …

Next Generation Longboard Trucks Ng-Trucks, Zach J. Ducatt

All Undergraduate Projects

A device is needed that will provide longboard riders with a truck that is specifically designed for the sharp turns and high speeds they experience throughout their ride. This longboard truck must have a design that is engineered for these purposes and avoids the standard pin and bushing design that is commonly copied from the closely related skateboard truck. This standardized design is outdated, and more importantly, was made to adhere to the skateboard style of riding, consisting primarily of performing tricks with less turning. The longboard truck provides a secure connection point upon the two wheels and the board …

Forge Burner, Caleb Desjardins

All Undergraduate Projects

Can small scale blacksmithing operations achieve a level of efficiency in their forge comparable to that of a large scale industry? The causes for the lack of efficiency needed to be pinpointed, and then the geometry of the existing design for the burner could be changed to fix the underlying issues, while still maintaining functionality. The problems with the previous design is the geometry of the intake giving an unknown air/fuel ratio, and the attachment of to the forge allowing the intake air to be contaminated by exhaust gasses. A burner needed to be designed that would solve these problems …

Drone Payload Storage & Release System (Dpsrs), Joseph E. Key

All Undergraduate Projects

The retail giant Amazon has become a household name synonymous with nearly instantaneous online shopping. What previously took weeks to deliver at exorbitant shipping fees can now arrive at your doorstep within two days—and all for free. This huge buyer incentive has skyrocketed the demand for online shopping, making Amazon the most valuable brand in the world. To meet this demand, Amazon and its distributors have proposed using drones to make deliveries. However, due to issues with cost and complexity, this has not yet materialized. As such, this project’s objective was to create a cheap and lightweight package-delivery system that …

Tensile Specimen Punch, Triet Huynh

All Undergraduate Projects

There is a significant demand of tensile specimen for the students in MET 426 Lab. The solution would be to facilitate specimen production in the lab. This project designed a punch and die to take raw sheet material and produce some tensile specimens. The project was conceived, analyzed, and designed at the Central Washington University (CWU) Mechanical Engineering Technology department. Working within the constraints of our university resource, all the parts were made in the CWU machine shop. This project includes the base, that holds the specimen in place, and the punch, that will remove the material. Two dies and …

Composite Ruddervator Replacement, Kelson Mills

All Undergraduate Projects

The Beechcraft V-tail Bonanza is a popular general aviation aircraft. Over 10,000 were built, but with the weakness of magnesium skinned control surfaces. Control surfaces on aircraft must be light, and precisely balanced. The V-tail Bonanza uses a unique “ruddervator” system, which combines the rudder and elevator into one surface to reduce drag, controlling the pitch and yaw of the aircraft. Magnesium was chosen by the designers for its lightweight properties, but corrodes badly and is becoming difficult to source for replacement parts. Aerodynamic flutter, from flexibility in the lightly built surface, and corrosion can cause breakup in flight, and …