Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2020

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 3601 - 3630 of 10642

Full-Text Articles in Engineering

Performance Analysis Of Netted Radar Data Fusion Systems, Zhijie Chen, Bin Rao, Yongzhen Li, Zhiwei Zong Jul 2020

Performance Analysis Of Netted Radar Data Fusion Systems, Zhijie Chen, Bin Rao, Yongzhen Li, Zhiwei Zong

Journal of System Simulation

Abstract: The performance analysis of netted radar data fusion systems was proposed. The principles of two representative radar netting modes (i.e., centralized fusion and distributed fusion) were introduced and the associated capabilities of anti-jamming, anti-stealth, fusion accuracy, fusion discrimination, and communication requirements were quantitatively analyzed. Simulation results indicate that the netting essence is, centralized fusion by using ‘or' rule to complement information and realize trajectory composition whereas distributed fusion by using ‘and' rule to reduce information redundancy and realize discrimination ability. The research can provide some enlightenment for the newly-developed intellective netted radar data fusion systems.

Go to article

Parameter Optimization On Coordinated Control System Of Thermal Power Units In High Rate Variable Load Operation Mode, Tian Liang, Liu Fang, Xinping Liu, Jizhen Liu Jul 2020

Parameter Optimization On Coordinated Control System Of Thermal Power Units In High Rate Variable Load Operation Mode, Tian Liang, Liu Fang, Xinping Liu, Jizhen Liu

Journal of System Simulation

Abstract: The frequent fluctuations and rapid change of power grid generating load instruction cause the deterioration of control quality of generating load and throttle pressure in thermal power units. To solve this problem, a trial and error method, the parameters adjustment range of which could be quantified, was proposed. Based on the model of controlled object, the initial value of controller parameters were set conservatively. By calculating the difference between current value and the target value of load change rate, the optimization times were determined, the PID controller parameters optimization method of coordinated control system was studied, and the effectiveness …

Go to article

Research On Section Optimization Of Water Quality Monitoring Based On Comprehensive Hierarchical Clustering, Xiaofeng Lian, Peng Sen, Xiaoyi Wang, Zaiwen Liu Jul 2020

Research On Section Optimization Of Water Quality Monitoring Based On Comprehensive Hierarchical Clustering, Xiaofeng Lian, Peng Sen, Xiaoyi Wang, Zaiwen Liu

Journal of System Simulation

Abstract: In order to optimize the layout of water quality monitoring section of river, lake and reservoir effectively, a new method for water quality monitoring section optimization was proposed based on comprehensive hierarchical clustering (CHC). A normalized matrix was constructed according to the original monitoring data of water quality. The method calculated the similarity to obtain the affinity-disaffinity relationship among the monitoring variables by 5 different distance algorithms, and then clustered the data set automatically by 4 different connection algorithms. Moreover, taking the correlation coefficient as the evaluation criteria, optimal hierarchical clustering algorithm was selected. With the generation …

Go to article

Sliding Parameters Calculation Of Agricultural Tracked Robot Based On Ukf And Smo, Jiao Jun, Kong Wen, Lichuan Gu, Wang Qiang, Ya Gao, Chenchen Yuan Jul 2020

Sliding Parameters Calculation Of Agricultural Tracked Robot Based On Ukf And Smo, Jiao Jun, Kong Wen, Lichuan Gu, Wang Qiang, Ya Gao, Chenchen Yuan

Journal of System Simulation

Abstract: In order to make ensure an Agricultural Tracked Robot (ATR) stable driving in farmland and reduce the slip phenomenon parameters, a novel sliding parameters estimation scheme of ATR based on UKF (Unscented Kalman Filter) and SMO (Sliding Mode Observer) was proposed. The motion equation and measurement equation of ATR were fused by UKF to compensate the measurement error from sensors and to reconstruct the precision pose parameters of ATR. Three slip parameter observers were designed for the sideslip angle, left and right track slip rate, which used the tangent function was used as the switching function to cover chattering …

Go to article

Experiment Platform For Pure Electric Vehicles And Bi-Directional Power Conversion, Shaojian Song, Qingfang Lin, Xiaofeng Lin Jul 2020

Experiment Platform For Pure Electric Vehicles And Bi-Directional Power Conversion, Shaojian Song, Qingfang Lin, Xiaofeng Lin

Journal of System Simulation

Abstract: As the energy consumption and environmental pollution brought by traditional internal combustion engine vehicles, the experimental platform for pure electric vehicle research is scarce, and most of the research uses virtual vehicle simulation software, which is difficult to accurately reflect the real vehicle system. An experiment platform for LiFePO4 Battery pack (the main energy source) and ultra-capacitor (the auxiliary energy source) hybrid pure electric vehicles and bi-directional power conversion was introduced. The test results show that the introduced experimental platform can be performance test for the key components of pure electric vehicle and energy management, running under …

Go to article

Implementation And Application Of Coordinate Stretched Pml Under Two-Dimensional Cylindrical Coordinate, Anshi Zhu, Zili Chen, Yang Yong, Yunhui Zhen Jul 2020

Implementation And Application Of Coordinate Stretched Pml Under Two-Dimensional Cylindrical Coordinate, Anshi Zhu, Zili Chen, Yang Yong, Yunhui Zhen

Journal of System Simulation

Abstract: According to the numerical calculation of electromagnetic field under cylindrical coordinate, the conventional split field absorbing boundary is no longer applicable. The coordinate stretched perfectly matched layers (CS-PML) were applied in the two-dimensional stretched cylindrical coordinate system. The updating equations of Maxwell curl equations in CS-PML were derived by using auxiliary equation method. The simulation results show that theoretical derivation is correct. The reflection coefficient of CS-PML is less than -30 dB, and it is able to meet the precision demand of numerical calculation. Besides, the CS-PML was adopted to investigate the radiation characteristic of the …

Go to article

Simulation Of Converter Torsional Vibration Based On Multi-Body Dynamics, Hongbin Liu, Yongsheng Shi, Zhang Lei, Hongbiao Han Jul 2020

Simulation Of Converter Torsional Vibration Based On Multi-Body Dynamics, Hongbin Liu, Yongsheng Shi, Zhang Lei, Hongbiao Han

Journal of System Simulation

Abstract: Torsional vibration of large converter is very easy to cause the transmission gear failure. In order to solve large converters' torsional vibration during working, a converter multi-body dynamic analysis model on rigid-flexible coupling method was built by using of multi-body dynamics simulation software RecurDyn and the finite element analysis software ANSYS. And the dynamic simulation study of this model was carried out. The effects of torsional vibration by different parking methods, parking times, the converters' vibration frequency and the amplitude were obtained through the dynamics simulation calculation. The results show that the torsional vibration amplitude of converter can …

Go to article

Air Quality Improvement During Triple-Lockdown In The Coastal City Of Kannur, Kerala To Combat Covid-19 Transmission, C. T. Resmi, T. Nishanth, M. K. Satheesh Kumar, M. G. Manoj, M. Balachandramohan, K. T. Valsaraj Jul 2020

Air Quality Improvement During Triple-Lockdown In The Coastal City Of Kannur, Kerala To Combat Covid-19 Transmission, C. T. Resmi, T. Nishanth, M. K. Satheesh Kumar, M. G. Manoj, M. Balachandramohan, K. T. Valsaraj

Faculty Publications

The novel SARS-CoV-2 coronavirus that emerged in the city of Wuhan, China, last year has since become the COVID-19 pandemic across all continents. To restrict the spread of the virus pandemic, the Government of India imposed a lockdown from 25 March 2020. In India, Kannur district was identified as the first "hotspot" of virus transmission and a "triple-lockdown" was implemented for a span of twenty days from 20 April 2020. This article highlights the variations of surface O-3, NO, NO2, CO, SO2, NH3, VOC's, PM10, PM2.5 and meteorological parameters at the time of pre-lockdown, lockdown and triple-lockdown days at Kannur …

Go to article

Study On Theory Of Scale Model Simulation Of Light Wave-Microwave System On Inequality Electrical Length Conditions, He Jing, Miao Qiang, Qifan Zhao Jul 2020

Study On Theory Of Scale Model Simulation Of Light Wave-Microwave System On Inequality Electrical Length Conditions, He Jing, Miao Qiang, Qifan Zhao

Journal of System Simulation

Abstract: Light wave model measurement microwave system at big scale factor on inequality electrical length conditions was proposed. The analysis idea of such model measurement was put forward. The feasibility of simulating electromagnetic scattering at microwave band using optic wave was discussed from the angle of physical similitude and technological feasibility. Then according to this idea, the similitude relationship and conditions in the application such as RCS measurement and multipath effect measurement were analyzed in detail on inequality electrical length conditions model measurement. The research result offers a new research approach in the field of large scale electromagnetic system simulation.

Go to article

Finite Element Simulation Of Machining 7075 Aluminum Alloy Based On Advantedge And Corresponding Experimental Study, Yusong Liao, Han Jiang Jul 2020

Finite Element Simulation Of Machining 7075 Aluminum Alloy Based On Advantedge And Corresponding Experimental Study, Yusong Liao, Han Jiang

Journal of System Simulation

Abstract: Abstract: The finite element simulation of cutting 7050 aluminum alloy was carried out based on the software of AdvantEdge, and Johnson-Cook constitutive model was chosen for the workpiece material in the model. The parameters for the constitutive model were obtained through the Hopkinson experiment. The cutting forces and surface qualities were observed through different cutting velocities and cutting depths. The cutting velocity and cutting depth were optimized, and the experiment was carried out with the guidance of the simulation results. The machined workpiece obtained from the experiment shows that the optimized cutting parameters can improve the machined surface property …

Go to article

Study On Operation Mechanism Of Mixed Closed Loop Transportation Network With Exponential Queues, Li Bing, Xuan Hua, Li Jing Jul 2020

Study On Operation Mechanism Of Mixed Closed Loop Transportation Network With Exponential Queues, Li Bing, Xuan Hua, Li Jing

Journal of System Simulation

Abstract: Mixed transport queuing network is composed of single route station road and multiple route station as parallel and series form. Two random variables to denote respectively time interval of vehicle arriving freight station and the service time of these handling platforms in freight station obeyed negative exponential distribution. The closed mixed transportation queuing network was simulated using SimEvents module in Matlab software. The dynamic changes of the queue length and waiting time in freight station were analyzed. Then vehicle distribution in mixed closed loop transportation network was analyzed. The formulation to compute vehicle distribution probability in steady state was …

Go to article

Relating Asphalt Concrete’S Pore Structure To Its Durability, Mohiuddin Ahmad Jul 2020

Relating Asphalt Concrete’S Pore Structure To Its Durability, Mohiuddin Ahmad

Civil Engineering ETDs

Most of the pavements in the USA are constructed using asphalt concrete (AC). AC changes its property over time due to moisture intrusion and aging. These two factors deteriorate AC significantly, and they are considered as the most important durability measures of AC. Moisture enters a pavement in both liquid and vapor form through the permeable pores that are interconnected. Similarly, oxygen, which is required for the aging process, access an asphalt concrete pavement through the connected pore. However, none of the previous studies correlated AC’s pore structure to the flow of moisture, moisture damage, and aging. In this study, …

Go to article

Implementation Of Biogas-Based Energy Security Program And Evaluation Of Its Sustainability In Kediri Village, Pringsewu District, Lampung Province, Sri Ismiyati Damayanti, Simparmin Ginting, Otik Nawansih, Siti Hudaidah Jul 2020

Implementation Of Biogas-Based Energy Security Program And Evaluation Of Its Sustainability In Kediri Village, Pringsewu District, Lampung Province, Sri Ismiyati Damayanti, Simparmin Ginting, Otik Nawansih, Siti Hudaidah

ASEAN Journal of Community Engagement

The Biogas-based energy security program in Kediri Village, Pringsewu District, Lampung Province, aims to provide awareness and knowledge to villagers about the potential of cow dung to be made into biogas and promote awareness of good environment quality. An evaluation of the sustainability of the program in the community was conducted. The methods that were used in this program are (1) socialization to provide awareness of good environment quality and energy security, (2) digester construction and stove and biogas lamp installation, which was carried out by the community together with certified trainers, (3) creation of a master design of the …

Go to article

Cross-Border Development: A Long-Term Role For Universities, Robert Brian Smith, Nucharee Nuchkoom Smith Jul 2020

Cross-Border Development: A Long-Term Role For Universities, Robert Brian Smith, Nucharee Nuchkoom Smith

ASEAN Journal of Community Engagement

Low-income economies are experiencing potential serious threats in terms of long-term sustainability and social development. At the same time, most developing economies are grappling with possible disruptions from the Fourth Industrial Revolution and the current COVID-19 pandemic and its economic consequences. However, every economy has the same goal of elevating its status to that of a developed country. This research uses the narrative/case study approach to examine cross-border development and the role that universities can play as important actors in the development of society. Moreover, this research combines observations and literature analysis. Universities are clearly best placed to play an …

Go to article

Visually Evoked Responses Are Enhanced When Engaging In A Video Game, Jason J. Ki, Lucas C. Parra, Jacek P. Dmochowski Jul 2020

Visually Evoked Responses Are Enhanced When Engaging In A Video Game, Jason J. Ki, Lucas C. Parra, Jacek P. Dmochowski

Publications and Research

While it is well known that vision guides movement, less appreciated is that the motor cortex also provides input to the visual system. Here, we asked whether neural processing of visual stimuli is acutely modulated during motor activity, hypothesizing that visual evoked responses are enhanced when engaged in a motor task that depends on the visual stimulus. To test this, we told participants that their brain activity was controlling a video game that was in fact the playback of a prerecorded game. The deception, which was effective in half of participants, aimed to engage the motor system while avoiding evoked …

Go to article

Pesticide Occurrence And Persistence Entering Recreational Lakes Residing In Watersheds Of Various Land Uses, Jessica Satiroff Jul 2020

Pesticide Occurrence And Persistence Entering Recreational Lakes Residing In Watersheds Of Various Land Uses, Jessica Satiroff

Department of Environmental Engineering: Theses and Other Student Research

Common Use Pesticides (CUPs) are important for agricultural producers to sustain food production. As a result, regions with high rates of agricultural production, such as the Midwest, often have ubiquitous occurrences of pesticides in surface and groundwater 1. Once pesticides are introduced into an ecosystem, pesticides have the potential for creating unwanted effects on non-target species and downstream environments 2,3. However, pesticides do not come strictly from agricultural practices. Therefore, the research presented in this thesis focuses on the neonicotinoid and fungicide concentrations detected in recreational lakes as well as their persistence in these aquatic environments during the …

Go to article

Review On Modeling And Simulation Of Critical Infrastructures, Baoliang Xiao, Mingzhi Zhang, Xiaoyuan He Jul 2020

Review On Modeling And Simulation Of Critical Infrastructures, Baoliang Xiao, Mingzhi Zhang, Xiaoyuan He

Journal of System Simulation

Abstract: Economic prosperity, national security and society well-being have long depended on the important services that some critical infrastructures are provided. The safety of the critical infrastructures is vital for the normal operation of the country. On the basis of research on the connotation of critical infrastructure to different nation in different historical period, the definition, classification and model of interdependencies among critical infrastructures were analyzed. The principal modeling and simulation techniques of critical infrastructure and their merits and drawbacks were summarized. The significant protection projection s and tools were analyzed and researched. Depending on all above studies, knowing …

Go to article

Fire Reconstruction Method Based On Les And Linear Programming, Guangyao Yao, Peizhong Yang, Tan Xun Jul 2020

Fire Reconstruction Method Based On Les And Linear Programming, Guangyao Yao, Peizhong Yang, Tan Xun

Journal of System Simulation

Abstract: A method based on LES and linear programming was proposed for the numerical construction of fire accident. In the simulation with LES method, all the quantities were decomposed into large-scale components and small-scale components. For large-scale components, the direct simulation method was used. For small-scale components, the subgrid model was used. The LES method could improve the simulation accuracy. In the linear programming method, the parameters were locally linearized to solve the optimization problem. It could improve the simulation efficiency. The method was applied to the numerical reconstruction of a wholesale market fire in Shanghai. The spread of fire …

Go to article

Compressed-Sensing Based Up-Sampling Method For Fluid Simulation, Yijing Qian, Xubo Yang Jul 2020

Compressed-Sensing Based Up-Sampling Method For Fluid Simulation, Yijing Qian, Xubo Yang

Journal of System Simulation

Abstract: In computer fluid animation, the grid-based Euler method is a well-matured and effective way of simulating fluids, but a key bottleneck of Euler method is that it is limited to the traditional Nyquist-Shannon sampling theorem in sampling step. So it cannot effectively reduce the massive data and computing of the large-scale flow fields. In order to solve this problem, compressed sensing theory was used to probe a way to break through the limitation of the sampling theorem in fluid simulation. The sparsity and compressibility of fluid data were explored, then applicable sampling function, compressive basis and reconstruction algorithm for …

Go to article

Modeling Research On Dynamic Pressure Distribution Of Pilot Body In Maneuver Flight, Liu Gang, Yunpu Wang, Hongwei Chi, Hongyin Yuan Jul 2020

Modeling Research On Dynamic Pressure Distribution Of Pilot Body In Maneuver Flight, Liu Gang, Yunpu Wang, Hongwei Chi, Hongyin Yuan

Journal of System Simulation

Abstract: Relationship between dynamic surface forces distribution of pilot body and flight load in maneuver flight was studied. Dynamic surface pressure and shear distribution of pilot body seated posture were expressed by setting up dynamic pressure factor and dynamic shear factor. Flight kinetic equations of pilot body seated posture were established. In the equations, relationship between pilot body inertia forces and dynamic surface forces were given, and the equations are square nonlinear for dynamic pressure factor and shear factor. Finally an example for climbing turn maneuver flight of some aircraft was done, dynamic surface forces distribution of pilot …

Go to article

Numerical Simulation Of Hot And Cold Fluids Mixing In A Tee-Junction, Wenli Wei, Yunfei Hong, Shipeng Shao, Yuling Liu Jul 2020

Numerical Simulation Of Hot And Cold Fluids Mixing In A Tee-Junction, Wenli Wei, Yunfei Hong, Shipeng Shao, Yuling Liu

Journal of System Simulation

Abstract: Flow and heat transfer model in tee junction was established and the 3D RNG k-ε turbulence model was completed to simulate the process of mixing and capture the information of velocity and temperature. The simulation results and measured data of the mean value of velocity and temperature were analyzed and compared, and are in a good agreement, which indicates that the RNG k-ε model combined with the heat transfer model can well simulate the hydraulic characteristics and heat transfer mechanism of hot and cold fluids in a tee junction. Furthermore, the upstream segment of a tee junction has two …

Go to article

Research On Fault Diagnosis For Pitch Sensors Of Wind Turbines, Yanjie Zhai, Dinghui Wu, Yiyang Li, Zhicheng Ji Jul 2020

Research On Fault Diagnosis For Pitch Sensors Of Wind Turbines, Yanjie Zhai, Dinghui Wu, Yiyang Li, Zhicheng Ji

Journal of System Simulation

Abstract: Considering the biased output fault of pitch sensors for wind turbines, a fault diagnosis method based on the multi-innovation kalman filter algorithm was proposed. The corresponding relationship between the change of the pitch angle and the tiny displacement produced by the force acting on the tower was established according to the mechanical structure characteristics of wind turbines. More accurate estimated value for the tiny displacement was achieved by using the multi-innovation kalman filter algorithm which had higher convergence speed and estimation accuracy to reduce the large noise of the output information generated by sensors. The fault could be detected …

Go to article

Research On Methods For Transformation Of Declarative Model For Semi-Physical Simulation, Weijian Huang, Jianwan Ding, Liping Chen, Zhaoyuan Zhou Jul 2020

Research On Methods For Transformation Of Declarative Model For Semi-Physical Simulation, Weijian Huang, Jianwan Ding, Liping Chen, Zhaoyuan Zhou

Journal of System Simulation

Abstract: A new method for the transformation from the declarative model to the model for semi-physical simulation was proposed aiming at semi-physical simulation. By analyzing the mathematical form of the declarative model and the model for semi-physical simulation, based on bipartite graph, the mathematical form of declarative model to the mathematical form of the model for semi-physical simulation was transformed through decomposition based on bipartite graph and tearing the algebraic loop, using clutch model as the model transformation examples. The declarative model transforming idea has overcome the disadvantages of process modeling method such as considering the causality, difficult …

Go to article

Numerical Simulation About Fuel Injection Source Location Impacting On Turbulent Combustion Process, Sun Hui, Guangcheng Cai, Jiang Lin, Shibo Wang Jul 2020

Numerical Simulation About Fuel Injection Source Location Impacting On Turbulent Combustion Process, Sun Hui, Guangcheng Cai, Jiang Lin, Shibo Wang

Journal of System Simulation

Abstract: Fuel injection source location has very important influence on combustion process. It determines the location of the furnace flame. The three dimensional model of the furnace was established by the numerical simulation method. Under different conditions, the fuel injection source location on the temperature field within the furnace, the pollutant concentration field, and the flow field distribution inside the furnace combustion process were investigated. The results were compared and analyzed. After analysis, the results show that the fuel injection source location from 1.1 ~ 1.5 meter process of change, the average temperature within the furnace continue to rise, the …

Go to article

Image Saliency Analysis Based On Grey Relational Computation And Prior Combination, Qiangqiang Zhou, Zhicheng Wang, Weidong Zhao, Yufei Chen, Wang Gang Jul 2020

Image Saliency Analysis Based On Grey Relational Computation And Prior Combination, Qiangqiang Zhou, Zhicheng Wang, Weidong Zhao, Yufei Chen, Wang Gang

Journal of System Simulation

Abstract: An image saliency analysis method based on the combination of grey relational computation and prior knowledge, which is a saliency computation and integration based on three different priori of boundary background, global color distribution and top salient information. The SLIC method segment the image into superpixels, then selecting the boundary superpixels on four image sides respectively to construct the reference sequence, and the same method used to construct the comparative sequence of the rest superpixels. Then four initial saliency images was derived based on boundary background priori through a grey relational computation, to make weighted and …

Go to article

Improved Crack Removing Algorithm For Quad-Tree Terrain Rendering, Wan Ming, Liang Xia, Fengming Zhang Jul 2020

Improved Crack Removing Algorithm For Quad-Tree Terrain Rendering, Wan Ming, Liang Xia, Fengming Zhang

Journal of System Simulation

Abstract: In 3D large scale multi-resolution terrain rendering, an improved algorithm based on LOD control and visibility for crack removing was proposed. It is proved that quad-tree grid is restricted while the ratio of visible distance to grid extent is large than 3. In preprocess stage, cracks were classified to raise crack and dropped crack, and crack patches with the same size as cracks were generated and attached to the latter. In real-time rendering stage, no special calculation by CPU for restriction of level of detail or for crack removing between adjacent grids was needed. Example shows that …

Go to article

Chaos Analysis For Tcp Congestion Control In Heterogeneous Networks, Xuhui Wei, Wang Hui Jul 2020

Chaos Analysis For Tcp Congestion Control In Heterogeneous Networks, Xuhui Wei, Wang Hui

Journal of System Simulation

Abstract: In order to study the chaos nature of TCP in Heterogeneous Network, the major features were demonstrated such as periodicity, sensitivity to initial conditions (butterfly effect), and strange attractor of chaotic system by analyzing parameters in Heterogeneous Network proving that TCP shows chaos nature in Heterogeneous Network in certain situations. Numerical examples show that in the case of system with low bottleneck link, the system shows fine periodic and stable behavior, and there is no TCP deadlock phenomenon in the heterogeneous network system. In the case of system with larger bottleneck link, the system shows chaotic. And a …

Go to article

Design And Motion Control Of Four-Wheel Automotive Chassis Inspection Robot, Jue Zhu, Yongbin Huang, Zhang He Jul 2020

Design And Motion Control Of Four-Wheel Automotive Chassis Inspection Robot, Jue Zhu, Yongbin Huang, Zhang He

Journal of System Simulation

Abstract: The system structure of an automobile chassis inspection robot was introduced. Furthermore the equation of motion state of robot was established and a decoupling controller was designed. The robot with omnidirectional wheel moving mechanism achieved the chassis image acquisition with wireless camera system and employed the active disturbance rejection controller for motion control. The robot has the characters of wide applicability, flexibility of platform movement, the stability of motion state, which can effectively compensate for the lack of traditional inspection methods, and a reasonable design in automobile chassis inspection is proved. The motion equation of state established for omnidirectional …

Go to article

Adaptive Multichannel Double L-Shaped Microphone Array Sound Source Localization Algorithm, Yecai Guo, Sainan Zhu, Zhang Ning Jul 2020

Adaptive Multichannel Double L-Shaped Microphone Array Sound Source Localization Algorithm, Yecai Guo, Sainan Zhu, Zhang Ning

Journal of System Simulation

Abstract: Aiming at the lack of ability to resist noise and reverberation and the location estimation low accuracy for the sound source localization method based on microphone array in the indoor sound environments, a sound source localization algorithm based on adaptive multichannel double L-shaped microphone array was proposed. In this proposed algorithm, normalized multichannel frequency-domain least mean square algorithm was used to estimate the impulse responses of different array elements and acquire the time delay under condition of the single source and multiple reverberation model, the spectrum energy was modified by penalty function to improve the ability to suppress noise …

Go to article

Cqpso Algorithm Based Control System Parameter Optimization, Genyuan Wei, Xinqiang Feng, Han Pu Jul 2020

Cqpso Algorithm Based Control System Parameter Optimization, Genyuan Wei, Xinqiang Feng, Han Pu

Journal of System Simulation

Abstract: According to the shortcomings of optimization methods of control system parameters, and the result of PSO algorithm usually falling into the partial optimum, Chaos Search and Quantum Space Search were added to the PSO algorithm, constituting the Chaos Quantum Particle Swarm Optimization algorithm, which was applied to the typical thermal control system parameters optimization. Introducing the selection of object functions of control system parameter optimization, describing the CQPSO algorithm process, the CQPSO algorithm was tested and analyzed through multiple test functions. The result shows that, compared with PSO and CPSO algorithm, CQPSO algorithm makes the particle swarm get out …

Go to article

First Prev Next Last