Engineering Commons^™

Improved Study Of Side-Channel Attacks Using Recurrent Neural Networks, Muhammad Abu Naser Rony Chowdhury

Boise State University Theses and Dissertations

Differential power analysis attacks are special kinds of side-channel attacks where power traces are considered as the side-channel information to launch the attack. These attacks are threatening and significant security issues for modern cryptographic devices such as smart cards, and Point of Sale (POS) machine; because after careful analysis of the power traces, the attacker can break any secured encryption algorithm and can steal sensitive information.

In our work, we study differential power analysis attack using two popular neural networks: Recurrent Neural Network (RNN) and Convolutional Neural Network (CNN). Our work seeks to answer three research questions(RQs):

RQ1: Is it …

In Silico Sequence Optimization For The Reproducible Generation Of Dna Structures, Michael D. Tobiason

Boise State University Theses and Dissertations

Biologically, deoxyribonucleic acid (DNA) molecules have been used for information storage for more than 3 billion years. Today, modern synthesis tools have made it possible to use synthetic DNA molecules as a material for engineering nanoscale structures. These self-assembling structures are capable of both resolutions as fine as 4 angstroms and executing programed dynamic behavior. Numerous approaches for creating structures from DNA have been proposed and validated, however it remains commonplace for engineered systems to exhibit unexpected behaviors such as low formation yields, poor performance, or total failure. It is plausible that at least some of these behaviors arise due …

Effects Of Magnetic Domain And Twin Boundary Interactions On Magneto-Mechanical Properties Of Magnetic Shape Memory Alloys, Medha Veligatla

Boise State University Theses and Dissertations

Magnetic shape memory (MSM) alloys deform substantially when exposed to a magnetic field. This recoverable plastic deformation occurs through crystallographic twinning. Thereby the internal magnetic domain structure modulates the deformation mechanisms through the interaction of magnetic domains with twin boundaries. We study the meso scale magneto-structural interactions that affect the macroscopic material properties of MSM alloys. The study at the meso length scale is most effective as it allows for resolving interactions at magnetic domain wall width resolution with reasonable computing cost. We apply micromagnetics simulations to evaluate the evolution of magnetic domains, their interaction with twin boundaries, the distribution …

Effect Of Corrective Surgery On Lower Limb Mechanics In Patients With Crouch Gait, Adelle Milholland

Boise State University Theses and Dissertations

Crouch gait a progressively degrading gait deviation associated with the neurological disorder cerebral palsy. If left untreated it can lead to anterior knee pain and a loss of ambulation. At present there exists no agreed upon metric for determining the surgical procedures used to treat crouch gait and there is insufficient means to analytically compare the results of different procedures. The aims of this thesis work were to create a pipeline to transform a patient’s gait analysis data into a finite element model, develop a model of sufficient complexity to evaluate a range of outcomes by which to judge the …

Isolated Nucleus Stiffens In Response To Low Intensity Vibration, Joshua Newberg

Boise State University Theses and Dissertations

The nucleus, central to all cellular activity, relies on both direct mechanical input and its molecular transducers to sense and respond to external mechanical stimuli. This response occurs by regulating intra-nuclear organization that ultimately determines gene expression to control cell function and fate. It has long been known that signals propagate from an extracellular environment to the cytoskeleton and into nucleus (outside-in signaling) to regulate cell behavior. Emerging evidence, however, shows that both the cytoskeleton and the nucleus have inherent abilities to sense and adapt to mechanical force, independent of each other. While it has been shown that isolated nuclei …

Nanoscale Optical And Correlative Microscopies For Quantitative Characterization Of Dna Nanostructures, Christopher Michael Green

Boise State University Theses and Dissertations

Methods to engineer nanomaterials and devices with uniquely tailored properties are highly sought after in fields such as manufacturing, medicine, energy, and the environment. The macromolecule deoxyribonucleic acid (DNA) enables programmable self-assembly of nanostructures with near arbitrary shape and size and with unprecedented precision and accuracy. Additionally, DNA can be chemically modified to attach molecules and nanoparticles, providing a means to organize active materials into devices with unique or enhanced properties. One particularly powerful form of DNA-based self-assembly, DNA origami, provides robust structures with the potential for nanometer-scale resolution of addressable sites. DNA origami are assembled from one large DNA …

Numerical Simulations Of Comprehensive Hydrodynamic Performance Of Darpa Suboff Submarine, Kenshiro Takahashi

Theses and Dissertations

A numerical study of the DARPA SUBOFF model using computational fluid dynamics (CFD) has been presented for developing a CFD application procedure to compute the hydrodynamic performance of underwater vehicles, including submarines. Several configurations, such as bare hull, fairwater, sterns, and/or ringwing-appended hulls, were examined for the straight-ahead, steady translation and turning, and self-propelled conditions. A systematic study was conducted to ensure an adequate computational domain expansion and reasonable prism layer mesh properties for solutions independent of the parameters. The hydrodynamic forces exerted on the hull and the appendages were verified and validated in accordance with a published methodology under …

Development Of A Novel System For The Analysis Of The Cardiovascular And Autonomic Nervous Systems, Seyedmohsen Dehghanojamahalleh

Theses and Dissertations

Chapter 1 - An introduction to autonomic nervous system (ANS) and cardiovascular system (CVS): The performance of the ANS can be evaluated by quantizing the changes made by the autonomic nervous system. The most common parameters that are being used in autonomic nervous system assessment tests are blood pressure, heart rate, pressure pulse wave velocity, heart rate variability, and pulse waveform. In this dissertation, we designed and developed a system that assesses the activity of these two systems. Therefore, we represented four methods to 1- evaluate the dependence of neuro- and cardiovascular systems on sex, 2- non-invasively estimate the blood …

The Influences Of Calculus I On Engineering Student Persistence, Amie Baisley

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

About half of the students that are declared engineering majors end up leaving engineering within their first two years at the university. This happens following the required math and science courses that these students must take before getting into the technical engineering coursework. There are two systems that students must be a part of at the university to feel comfortable and have the desire to continue on in their degree. These include the academic system and the social system. The experiences engineering students have during their first required math course, Calculus I, is likely not promoting integration into these two …

Rapid Prediction Of Low-Boom And Aerodynamic Performance Of Supersonic Transport Aircraft Using Panel Methods, Ted N. Giblette

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Utah State University Aerolab developed and tested a set of tools for rapid prediction of the loudness of a sonic boom generated by supersonic transport aircraft. This work supported a larger effort led by Texas A&M to investigate the use of adaptive aerostructures in lowering sonic boom loudness at off design conditions. Successful completion of this effort will improve the feasibility of supersonic commercial transport over land.

Funding was provided by a NASA University Leadership Initiative grant to several universities, including Utah State University, as well as industry partners to complete this work over a five year period. The …

Advancing Cyberinfrastructure For Collaborative Data Sharing And Modeling In Hydrology, Tian Gan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Hydrologic research is increasingly data and computationally intensive, and often involves hydrologic model simulation and collaboration among researchers. With the development of cyberinfrastructure, researchers are able to improve the efficiency, impact, and effectiveness of their research by utilizing online data sharing and hydrologic modeling functionality. However, further efforts are still in need to improve the capability of cyberinfrastructure to serve the hydrologic science community. This dissertation first presents the evaluation of a physically based snowmelt model as an alternative to a temperature index model to improve operational water supply forecasts in the Colorado River Basin. Then it presents the design …

Gpu-Accelerated Demodulation For A Satellite Ground Station, Emily Clark Young

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

One consequence of the increasing number of small satellite missions is an increasing demand for high data rate downlinks. As the satellites transmit at high data rates, ground-side receivers need to demodulate the transmitted data as quickly as possible. While application specific hardware can be designed, software defined radio solutions for ground stations are attractive for their flexibility, adaptability, and portability.

Another industry trend is the increasing use of Graphics Processing Units (GPUs) in general-purpose processing. By performing many operations simultaneously, GPUs are capable of accelerating processing when given a problem that can be implemented in a parallel manner. Furthermore, …

Reducing Thermal Bridging And Understanding Second-Order Effects In Concrete Sandwich Wall Panels, Taylor J. Sorensen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Structural engineers have traditionally detailed structures with structural and fabrication efficiency in mind, but often based on a limited understanding of thermal efficiency. Some connection designs can create significant thermal bridging, leading to unnecessary heat transfer and even premature degradation through condensation. Thermal bridging occurs when heat transfer is given a path through a more conductive material like concrete or steel rather than insulation. Concrete sandwich wall panels (SWP) tend to be highly efficient at preventing heat transfer in the middle of panels, with greatest heat transfer occurring at connections. This project identified thermally efficient details for future SWP construction …

Foreground Removal In A Multi-Camera System, Daniel T. Mortensen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Traditionally, whiteboards have been used to brainstorm, teach, and convey ideas with others. However distributing whiteboard content remotely can be challenging. To solve this problem, A multi-camera system was developed which can be scaled to broadcast an arbitrarily large writing surface while removing objects not related to the whiteboard content. Related research has been performed previously to combine multiple images together, identify and remove unrelated objects, also referred to as foreground, in a single image and correct for warping differences in camera frames. However, this is the first time anyone has attempted to solve this problem using a multi-camera system. …

Revolution In Autonomous Orbital Navigation (Raon), Rachit Bhatia

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spacecraft navigation is a critical component of any space mission. Space navigation uses on-board sensors and other techniques to determine the spacecraft’s current position and velocity, with permissible accuracy. It also provides requisite information to navigate to a desired position, while following the desired trajectory. Developments in technology have resulted in new techniques of space navigation. However, inertial navigation systems have consistently been the bedrock for space navigation.

Recently, the successful space mission GOCE used on-board gravity gradiometer for mapping Earth’s gravitational field. This has motivated the development of new techniques like cold atom accelerometers, to create ultra-sensitive gravity gradiometers, …

Hydro-Climatic Changes And Corresponding Impacts On Agricultural Water Demand In The Ganges Delta Of Bangladesh, Sonia Binte Murshed

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Ganges Delta in Bangladesh, a transboundary rural river basin, is an example of water-related calamities due to natural and human-induced stresses. It is an agriculture-dominated area with the presence of Sundarbans mangrove forest. Recently this area is facing unfavorable conditions due to limitations in quantity, quality, and timing of available freshwater. As a result, floods, droughts, water scarcity, stream depletion, salinity intrusion, excessive sedimentation are becoming common phenomena. These calamities are making this area unsuitable for agriculture and vulnerable to the Sundarbans’ ecosystem. This study aims to provide technical insight into issues related to water scarcity and projected agricultural …

Reservoir Applications Of Arced Labyrinth Weirs, Seth D. Thompson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In recent years, magnitudes of flood estimates used in hydraulic design have increased for many reservoirs. Consequently, many existing spillways are now deficient as they do not meet current discharge capacity requirements. To rehabilitate existing, fixed-width spillways, labyrinth weirs are often viable solutions. For reservoir applications, arcing labyrinth weirs into the reservoir increases hydraulic efficiency. This results from better cycle orientation to the approaching flow field.

This study supplements available arced labyrinth weir hydraulic data by observing flow characteristics of three laboratory-scale physical models and two numerical (CFD) models. Physical model results provide head (energy)-discharge data and empirical coefficients for …

A Soft-Error Reliability Testing Platform For Fpga-Based Network Systems, Hayden Cole Rowberry

Theses and Dissertations

FPGAs are frequently used in network systems to provide the performance and flexibility that is required of modern computer networks while allowing network vendors to bring products to market quickly. Like all electronic devices, FPGAs are vulnerable to ionizing radiation which can cause applications operating on an FPGA to fail. These low-level failures can have a wide range of negative effects on the performance of a network system. As computer networks play a larger role in modern society, it becomes increasingly important that these soft errors are addressed in the design of network systems.This work presents a framework for testing …

Maverick: A Stand-Alone Cad Flow For Partially Reconfigurable Fpga Modules, Dallon Godfrey Glick

Theses and Dissertations

Circuit designs for field-programmable gate arrays (FPGAs) are typically compiled by FPGA vendor tools, such as Xilinx's Vivado Design Suite. In recent years, partial reconfiguration (PR) has emerged as a popular technique that allows portions of an FPGA to be dynamically reconfigured after the complete device has been configured with an initial bitstream. However, the nature of current FPGA vendor tools limits further innovation and possible usage models of PR.This thesis presents Maverick, an open-source proof-of-concept computer-aided design (CAD) flow for generating reconfigurable modules (RMs) which target PR regions in FPGA designs. Maverick builds upon existing open source tools (Yosys, …

A New Qpcr Assay To Detect Geosmin-Producing Cyanobacteria, Shane Brian Davis

Theses and Dissertations

Taste-and-odor (T&O) compounds are frequently produced by cyanobacterial blooms in bodies of water. Geosmin, perhaps the most common T&O compound produced by these blooms, is not effectively removed by conventional water treatment processes and frequently causes the tap water to have an off flavor. Although geosmin is not harmful when ingested, it damages the consumers' confidence in the cleanliness of their water. There are treatment options for geosmin removal, but the most common methods are often not implemented until complaints are made by consumers.There has been an increasing amount of research on the use of polymerase chain reaction (PCR)-based methods …

Durability Of Hybrid Large Area Additive Tooling For Vacuum Infusion Of Composites, Nathan Joseph Northrup

Theses and Dissertations

The purpose of this research was to scientifically validate potential cost-saving measures for production of large area additively manufactured tooling for vacuum infusion of composites. These cost saving measures included using a hybrid additive/subtractive manufacturing system to fabricate the mold, requiring lower capital cost and creating shorter lead times. Fiberglass reinforcement was used instead of carbon in the mold material. The validation was done by designing and fabricating a mold for a custom test artifact and analyzing the surface geometry over the course of multiple infusions until tool failure.After printing and machining, the mold required a sealer in order to …

Design Optimization For A Compliant,Continuum-Joint, Quadruped Robot, Vallan Gray Sherrod

Theses and Dissertations

Legged robots have the potential to cover terrain not accessible to wheel-based robots and vehicles. This makes them better suited to perform tasks, such as search and rescue, in real-world unstructured environments. Pneumatically-actuated, compliant robots are also more suited than their rigid counterparts to work in real-world unstructured environments with humans where unintentional contact may occur. This thesis seeks to combine the benefits of these two type of robots by implementing design methods to aid in the design choice of a 16 degree of freedom (DoF) compliant, continuum-joint quadruped. This work focuses on the design optimization, especially the definition of …

The Flame Characteristics Of Diesel Fuel Blend With Kepuh (Sterculia Foetida) Biodiesel, Dani Hari Tunggal Prasetiyo, Nasrul Ilminnafik, Salahuddin Junus

Journal of Mechanical Engineering Science and Technology (JMEST)

Kepuh biodiesel fuel (sterculia foetida) is an alternative fuel that can be used to replace fossil fuel. Diesel fuel is performed to determine the laminar burning velocity and high flame by adding biodiesel kepuh volume of 10%, 20%, 30%. The purpose of this study was to study the effect of biodiesel and the effect of bunsen burners on the laminar burning velocity and flame height. Bunsen burner is made of copper and stainless steel. Testing of flame characteristics was carried out by heating the mixture of fuel and air at a temperature of 200°C. The purpose of heating the air …

Critical Solid Fraction Point Analysis: Case Study On Cement Mill Machine Diaphragm, Mochamad Achyarsyah, Poppy Puspitasari

Journal of Mechanical Engineering Science and Technology (JMEST)

During the solidification process, metal liquids turn into solid geometry units including the riser and gating system. The disruption in the liquid flow often causes shrinkage in the object. Critical Solid Fraction Point is a critical point where the continuous liquid supply turned solid and unable to pour to some sections. Simulation software can predict the critical solid fraction time of an object and the liquid supply behavior. The simulation helps the designer in the casting design. The application of low steel alloys in the cement industry, e.g., the Diaphragm, needs development to minimize the shrinkage. This research aimed to …

Characteristic Analysis Of Horizontal Axis Wind Turbine Using Airfoil Naca 4712, Bili Darnanto Susilo, Gaguk Jatisukamto, Nurkoyim Kustanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Wind energy has been developed and used as a source of electrical energy by converting wind energy into electrical energy using a generator. There are some wind turbine parameters that important for wind turbines design and model, includes the size of the rotor radius, airfoil selection, chord length, and pitch angle. The study aims to characterize the performance of a horizontal axis wind turbine using computational methods. The methods used a design and simulation of NACA 4412 and NACA 4712 airfoil using QBlade software using wind conditions in the region of Pancer, Jember. Results show that the maximum Cl value …

Synthesis And Applications Of Hematite Α-Fe2o3 : A Review, Muhamad Muhajir, Poppy Puspitasari, Jeefferie Abdul Razak

Journal of Mechanical Engineering Science and Technology (JMEST)

This article reviewed the hematite α-Fe2O3. It focuses on its material properties, nanostructures, synthesis techniques, and its numerous applications. Researchers prepared the hematite nanostructure using the synthesis methods such as hydrothermal, and, further, enhanced it by improving the techniques to accommodate the best performance for specific applications and to explore new applications of hematite in humidity sensing.

Failure Analysis On Titen Proto-Xx Car Chassis, Gaguk Jatisukamto, Rika Dwi Hidayatul Qoryah, Santoso Mulyadi

Journal of Mechanical Engineering Science and Technology (JMEST)

The car chassis as a skeleton supports all loads and is the most important component. Car chassis requirements must be rigid, twisting resistant, vibration resistant and resistant to fatigue. This study aims to find the cause of the failure of the Titen Proto-XX car chassis connection. The research methodology was conducted by testing the composition of materials and structural analysis using Ansys Workbench Release 15.0 software. The conclusion of the research is that the skeletal structure material uses Aluminum AA series 1XXX with Al content greater than 99.5%, the welding ability is low, causing a failure in the welded joint. …

The Effect Of Chlorophyll Concentration From Papaya Leaves On The Performance Of Dye-Sensitized Solar Cell, Dede Rizali, Heru Suryanto, Sukarni Sukarni

Journal of Mechanical Engineering Science and Technology (JMEST)

Dye-Sensitized Solar Cell (DSSC) is the third generation solar cell that has sandwich structure consisted of organic dye material and other components such as titanium dioxide (TiO2) semiconductor, electrolyte, and substrates (counter electrode and working electrode). The dye in the device was made from green plant chlorophyll such as papaya. This research aimed to find the influence of dye concentration from papaya leaves chlorophyll on the performance of DSCC. The discussion covered the output power (Pout), Fill Factor (FF), and efficiency (ɳ). The method in this research was explorative experimental with independent variables such as direct and indirect sunlight. The …

Microwave Tunneling And Robust Information Transfer Based On Parity-Time-Symmetric Absorber-Emitter Pairs, Zhicheng Xiao, Younes Ra’Di, Sergei Tretyakov, Andrea Alù

Advanced Science Research Center

Robust signal transfer in the form of electromagnetic waves is of fundamental importance in modern technology, yet its operation is often challenged by unwanted modifications of the channel connecting transmitter and receiver. Parity-time- (PT-) symmetric systems, combining active and passive elements in a balanced form, provide an interesting route in this context. Here, we demonstrate a PT-symmetric microwave system operating in the extreme case in which the channel is shorted through a small reactance, which acts as a nearly impenetrable obstacle, and it is therefore expected to induce large reflections and poor transmission. After placing a gain element behind the …

Deep Brain Stimulation: Prediction Model For Volume Of Tissue Stimulated, Melissa Jones, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

An attempt has been made to understand deep brain stimulation in humans via marketable devices that are approved by the US Food and Drug Administration. The electrode characteristics were presented to influence the volume of tissue stimulated. Experimental data were digitized and VTS data were presented a function of electrode diameter, aspect ratio, applied current, pulse duration, voltage and frequency. Amongst other trends voltage and VTS were found to exhibit a three-stage relation, where Stage II characteristics were represented by a linear equation. It is in this stage, the VTS was found to be stable and where the most effective …