Engineering Commons^™

Energy Analysis For Process Parameter Prediction Of Direct Energy Deposition Metal Additive Manufacturing, Daniel John Pulscher

Graduate Research Theses & Dissertations

Metal Additive Manufacturing with the Direct Energy Deposition (DED) process allows for rapid prototyping and low-volume custom manufacturing of complex geometries at a lower cost than traditional manufacturing methods. Direct energy deposition is a complex process having many inter-related process parameters that effect the overall quality and mechanical properties of the build. When new powder feedstocks are used, calibrating these process parameters is typically done empirically in trials that can contain more than a hundred different combinations of parameters. This time-consuming process can be reduced by performing an analytical analysis on how the energy from the laser transfers into the …

Applied Fluid Mechanics Lab Manual, Habib Ahmari, Shah Md Imran Kabir

Civil Engineering Faculty Publications - Archive

This lab manual provides students with the theory, practical applications, objectives, and laboratory procedure of ten experiments. The manual also includes educational videos showing how student should run each experiment and a workbook for organizing data collected in the lab and preparing result tables and charts.

Application Of Rb/Sr Ratio In Paleo-Climate Inversion, Shupei Ouyang, Muhammad Aqeel Ashraf, Yung-Tse Hung

Civil and Environmental Engineering Faculty Publications

In order to study the intensity of chemical weathering during the formation of sedimentary strata in the site profile, the evolution of climatic environment in the region where the site profile is located was revealed. The rubidium (Rb) and strontium (Sr) values in the rubidium (Rb) and strontium (Sr) were tested and analysed. The Rb/Sr ratio has become an ideal alternative indicator in the study of regional environmental evolution. The Rb value in the strata section of Zhongba site is low, and the average value (calculated based on 202 sample values) is only 80 g/g. The Sr value was higher, …

Ultrabroadband Mid-Infrared Emission From Cr 2+ -Doped Infrared Transparent Chalcogenide Glass Ceramics Embedded With Thermally Grown Zns Nanorods, Xiaosong Lu, Zhiqiang Lai, Runan Zhang, Haitao Guo, Jing Ren, Lukas Strizik, Tomas Wagner, Gerald Farrell, Pengfei Wang

Articles

We report, for the first time to our knowledge, an ultrabroadband mid-infrared (MIR) emission in the range of 1800–2800 nm at room temperature from a Cr2+-doped chalcogenide glass ceramic embedded with pure hexagonal (wurtzite) β-ZnS nanorods and study the emission-dependent properties on the doping concentration of Cr2+. A new family of chalcogenide glasses based on (100 − x) Ge1.5As2S6.5 – x ZnSe (in mol.%) was prepared by melt-quenching method. The Cr2+: β-ZnS nanorods of ˜150 nm in diameter and ˜1 μm in length were grown in the Cr2+-doped glass after thermal annealing. The compositional variations of glass structures and optical …

Bc(A)R Compliance - The Colander Effect, Seamus Harrington

Other Resources

The Building Control (Amendment) Regulations of 2014 has sought to leave the days of self-regulation in the past. However, the opt-out clause has created a two-tiered regulatory structure that questions if the regulations are fit for purpose?

This presentation takes an in depth look at the current regulatory structure and questions if there is a requirement for the introduction of a top-down Local Authority lead approach to Building Regulation Control, similar to that currently utilised throughout the UK and Northern Ireland in respect of all building projects?

Framework For Improving Complex System Performance, Charles B. Keating, Polinpapilinho F. Katina, Ra'ed Jaradat, Joseph M. Bradley, Richard Hodge

Engineering Management & Systems Engineering Faculty Publications

This paper introduces a framework for improvement of complex system performance. Complex systems are besieged with conditions marked by increasing uncertainty, emergence, and ambiguity. Additionally, demands for increased productivity, resource efficiencies, and performance improvement make new approaches paramount for modern systems engineers. In response, a framework to improve complex system performance is developed. Following an introduction, the paper pursues four objectives: (1) introduction of Complex System Governance (CSG) as a foundation to describe essential system functions, (2) suggest system `pathologies' as an explanation for deep system performance issues, (3) exploration of system performance improvement as a function of `requisite variety' …

Development Of A New Instrument To Assess The Performance Of Systems Engineers, Niamat Ullah Ibne Hossain, Morteza Nagahi, Raed Jaradat, Charles Keating

Engineering Management & Systems Engineering Faculty Publications

Complex systems continue to confound the capabilities of systems engineers to deal with and navigate a new generation of problems. Thus, there is an emerging need to develop a cadre of effective systems engineers capable of efficiently addressing complex systems problems. This paper introduces a new system engineering instrument that assesses the performance of systems engineers. The instrument is based on the set of performance indicators examining six fundamental system engineering attributes. This instrument would provide a baseline to understand the current state of the systems engineering skills for a systems engineer and indicate developmental areas to enhance those skills. …

Healthcare Robotics: Key Factors That Impact Robot Adoption In Healthcare, Sujatha Alla, Pilar Pazos

Engineering Management & Systems Engineering Faculty Publications

In the current dynamic business environment, healthcare organizations are focused on improving patient satisfaction, performance, and efficiency. The healthcare industry is considered a complex system that is highly reliant of new technologies to support clinical as well as business processes. Robotics is one of such technologies that is considered to have the potential to increase efficiency in a wide range of clinical services. Although the use of robotics in healthcare is at the early stages of adoption, some studies have shown the capacity of this technology to improve precision, accessibility through less invasive procedures, and reduction of human error during …

Masat Dhe Veprimet Për Parandalimin Dhe Menaxhimin E Rreziqeve Në Kantier Ndërtimi - Rasti Studimor N.N.Sh “Labi Gipser”- Deçan, Fatmir Ahmetxhekaj

Theses and Dissertations

Sektori i ndërtimit mbetet mjaft sfidues dhe me rrezik të lartë edhe pse viteve të fundit ka pasur një rritje të lehtë për sa i takon rregullimit juridik dhe ndërmarrjes së masave për menaxhimin e tij. Megjithatë, ndërrmarrja e masave dhe menaxhimi i rrezikut mbetet ende larg normave dhe standardeve për siguri dhe mbrojtje në punë. Mbështetur në statistika të deklaruara nga agjencioni i statistikave të Kosovës, inspektorati i punës në Republikën e Kosovës, si dhe burime tjera të shkruara dhe elektronike rezulton se rastet e lendimeve dhe atyre me fatalitet në sektorin e ndërtimit po tregojnë rritje të lehtë …

Beating Clusters Created With Cardiac Extracellular Matrix From Decellularized Pig Hearts And Repopulated With Human Induced Pluripotent Stem Cell-Derived Cardiomyocytes, Isaac Myres, Bryce Allen, Silvia Moncada, Sebastian Valencia, Beverly L. Roeder, Alonzo D. Cook

Library/Life Sciences Undergraduate Poster Competition 2019

Due to the high prevalence of heart disease, scarcity of donors, and high risk of transplant rejection, we aim to engineer patient specific beating cardiac patches and whole hearts for transplant.

A Promising Modification Of Pt Surfaces With Cnts For Decreasing Poisoning Impact In Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Aya A. Khalifa Ms.

Chemical Engineering

Direct methanol fuel cells (DMFCs) are clean energy sources that have many applications due to the high energy density of methanol as a fuel. However, this type of fuel cells (FCs) has limitations that are preventing it from being commercialized. One such limitation is the adsorption of intermediates such as CO into the surface of the Platinum (Pt) catalyst during methanol oxidation (MO) which deactivates its active sites, where the reaction is taking place, and leads to poisoning of the electrode over the long term. In this study, multi-walled carbon nanotubes (MWCNTs) have been introduced to the Pt-modified glassy carbon …

Enhanced Electro-Oxidation Of Methanol At Pt-Au Nanocatalyst For Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

In this investigation, a Pt-Au nanocatalyst prepared by the coelectrodeposition of Pt (PtNPs) and Au (AuNPs) nanoparticles is assembled onto a glassy carbon (GC) electrode for efficient methanol oxidation (MO). Several molar ratios between PtNPs and AuNPs have been used and the corresponding catalytic activity towards MO is tracked. The Pt1:Au1 catalyst showed the highest catalytic activity (5 times higher oxidation peak current (Ip) and a 126 mV negative shift in the onset potential (Eonset) toward MO). The catalyst’s morphology, composition and activity are investigated and the ehancement mechanism is recognized.

A Simple And Effective Way To Overcome Carbon Monoxide Poisoning Of Platinum Surfaces In Direct Formic Acid Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Sohair A. Darwish Ms

Chemical Engineering

A glassy carbon (GC) electrode modified with multi-walled carbon nanotubes (MWCNTs) and platinum nanoparticles (PtNPs), Pt/MWCNTs-GC, has been introduced for formic acid electro-oxidation (FAO). A similar loading of PtNPs has been conserved for a proper comparison between the Pt/MWCNTs-GC and the unmodified Pt/GC electrodes. The modification with MWCNTs could enhance the loading of PtNPs onto the GC electrode in a way that minimizes its agglomeration and increases its dispersion in the CNTs network. This not only increases the surface area exposed to the reaction but also interrupts the contiguity of the Pt active sites minimizing the adsorption of the poisoning …

A Multi-Response Optimization For Isomerization Of Light Naphtha, Donia Abdel Nasser Fathy, Moustafa A. Soliman

Chemical Engineering

Isomerization process is considered one of the main processes used to produce high octane rating gasoline with improved environmental conditions and less emissions. The main keys of performance in isomerization units are the product yield, paraffin isomerization number (PIN) and octane number (RON). In this article we present a multi-response optimization strategy for an industrial naphtha continuous isomerization-process that aims to maximize RON, PIN and yield. Data of 53-runs including feed compositions as well as operating conditions; reactor temperature, benzene content, liquid hour space velocity, feed PIN, hydrogen to hydrocarbon ratio, feed octane number, C7+ content, inlet reactor temperature and …

Evaluate Probe Speed Data Quality To Improve Transportation Modeling, Fahmida Rahman

Theses and Dissertations--Civil Engineering

Probe speed data are widely used to calculate performance measures for quantifying state-wide traffic conditions. Estimation of the accurate performance measures requires adequate speed data observations. However, probe vehicles reporting the speed data may not be available all the time on each road segment. Agencies need to develop a good understanding of the adequacy of these reported data before using them in different transportation applications. This study attempts to systematically assess the quality of the probe data by proposing a method, which determines the minimum sample rate for checking data adequacy. The minimum sample rate is defined as the minimum …

E-Construction Technologies For Efficient Highway Construction Inspections, Dhaivat Patel

Theses and Dissertations--Civil Engineering

Over recent years, organizations such as the Federal Highway Administration and Departments of Transportation across the United States have showed interest in automating highway construction processes. The addition of e-Construction and other advanced technologies can significantly improve the efficiency and safety of highway paving operations, specifically paving inspections. Activities such as collecting load tickets, tracking pavement lay-down temperatures, and monitoring roller movement are antiquated practices that DOT inspectors perform during paving operations. E-Ticketing, Paver Mounted Thermal Profiling, and Intelligent Compaction were proposed to automate paving inspections and were recently tested in two resurfacing pilot projects in the state of Kentucky. …

Leaching Characteristics Of Rare Earth Elements From Bituminous Coal-Based Sources, Xinbo Yang

Theses and Dissertations--Mining Engineering

The demand for rare earth elements (REEs) has increased over the last decade due to applications in high technology devices including those in the defense industry. The recovery of REEs from primary sources such as rare earth minerals are viable using physical separations followed by chemical processing. However, weak market values and environmental concerns have limited the viability of such operations. On the other hand, REE recovery from secondary sources such as apatite ore, bauxite waste, and waste recycling, provides an opportunity to take advantage of a resource that does not require mining costs as well as other associated costs …

Thermodynamic Modeling And Equilibrium System Design Of A Solvent Extraction Process For Dilute Rare Earth Solutions, Alind Chandra

Theses and Dissertations--Mining Engineering

Rare earth elements (REEs) are a group of 15 elements in the lanthanide series along with scandium and yttrium. They are often grouped together because of their similar chemical properties. As a result of their increased application in advanced technologies and electronics including electric vehicles, the demand of REEs and other critical elements has increased in recent decades and is expected to significantly grow over the next decade. As the majority of REEs are produced and utilized within the manufacturing industry in China, concerns over future supplies to support national defense technologies and associated manufacturing industries has generated interest in …

Benefits Of Developing An App To Map The Potholes In West Virginia, Trevor R. Smith

Honors Projects

No abstract provided.

Neuroengineering Of Clustering Algorithms, Leonardo Enzo Brito Da Silva

Doctoral Dissertations

"Cluster analysis can be broadly divided into multivariate data visualization, clustering algorithms, and cluster validation. This dissertation contributes neural network-based techniques to perform all three unsupervised learning tasks. Particularly, the first paper provides a comprehensive review on adaptive resonance theory (ART) models for engineering applications and provides context for the four subsequent papers. These papers are devoted to enhancements of ART-based clustering algorithms from (a) a practical perspective by exploiting the visual assessment of cluster tendency (VAT) sorting algorithm as a preprocessor for ART offline training, thus mitigating ordering effects; and (b) an engineering perspective by designing a family of …

Experimental Study On Enhanced Oil Recovery (Eor) Mechanisms Of Nanogel Combining With Low Salinity Water For Carbonate Reservoirs, Pu Han

Doctoral Dissertations

"Nanomaterials have been widely studied and applied in the oil and gas industry. Among the developed nanomaterials, nano-sized crosslinked polymeric gel particle (nanogel) has shown great potential in recovering residual oil and improving oil recovery. This dissertation carried out their potential EOR mechanisms and the synergetic effect between nanogel and low salinity water. Nanogel used in this study was synthesized through the suspension polymerization process in our lab. The morphology, size distribution, and zeta potential were studied for nanogel dispersed in brine with variable ionic strength. The injectivity of nanogel was elucidated at first to ensure their in-depth penetration ability. …

Ares Cleaning System, Andy Sagers, John Cunningham, Peter Greig, Jack Glynn

Mechanical Engineering

In this Final Design Review, the team outlines the general scope of the ARES Cleaning System project and the final design direction chosen and built. This team consists of a group of four mechanical engineering students who have been tasked with designing and manufacturing an autonomous ARES cleaning system to help their sponsor, Fracsun, better track soiling losses measured at large solar arrays. They designed, conceptualized, manufactured, and tested throughout the project as they looked to create a final, functioning product. In creating this Final Design Review, they have identified how the product will perform the desired functions and what …

Smart Control Architecture For Microgrid Application, Vikram Roy Chowdhury

Doctoral Dissertations

"This research proposes non-linear control architectures dedicated towards improving transient response, reliability and computational burden for grid connected inverters applicable for ac micro-grids. Also this work proposes an optimization procedure applied to a small microgrid to reduce the billing cost for power incorporating battery degradation mechanism.

Three works are discussed in this research that discusses methodologies to improve the operation of a three phase grid connected inverters. The first work discusses a globally stable estimation architecture for estimating the plant parameters for a grid connected inverter during its operation. Then a Lyapunov based control architecture is utilized and online parameter …

Development Of Functional Ionic Liquids For Separation And Recovery Of Rare Earth Elements, Mostafa Khodakarami

Doctoral Dissertations

“This research focused on the design and synthesis of task-specific ionic liquids for enhanced extraction and separation of rare earth elements (REEs). Two novel ammonium-based functional ionic liquids (FILs) with oxygen donating groups: trioctyl(2-ethoxy-2-oxoethyl)ammonium dihexyl diglycolamate, [OcGBOEt][DHDGA], and tricaprylmethylammonium dihexyl diglycolamate, [A336][DHDGA] were synthesized and tested for the recovery and separation of selected REEs from aqueous solutions. Functionalities with different denticities were incorporated into both anionic and cationic parts of ionic liquids, which are solely composed of incinerable atoms including C, H, O, and N. The structural, physical, and chemical properties of the synthesized FILs were studied using nuclear magnetic …

Development And Preliminary Evaluation Of An Integrated Individual Nozzle Direct Injection And Carrier Flow Rate Control System For Pesticide Applications, Joe D. Luck, Scott A. Shearer, Michael P. Sama

Biosystems and Agricultural Engineering Faculty Publications

Direct injection systems for agricultural spray applications continue to present challenges in terms of commercialization and adoption by end users. Such systems have typically suffered from lag time and mixing uniformity issues, which have outweighed the potential benefits of keeping chemical and carrier separate or reducing improper tank-mixed concentration by eliminating operator measurements. The proposed system sought to combine high-pressure direct nozzle injection with an automated variable-flow nozzle to improve chemical mixing and response times. The specific objectives were to: (1) integrate a high-pressure direct nozzle injection system with variable-flow carrier control into a prototype for testing, (2) assess the …

Economic Analysis Of Deficit Irrigation In Sugarcane Farming: Nchalo Estate, Chikwawa District, Malawi, Mavuto M. Banda, Derek M. Heeren, Derrel Martin, Francisco Muñoz-Arriola, László G. Hayde

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Sustenance of the growing world population calls for increased agricultural production. However, this will have to be done while forecasts of water withdrawals on a global scale predict sharp increases in future demand to meet human needs. The inadequacy of irrigation water supplies has led to the need to consider deficit irrigation (DI) as a water saving strategy. DI is a deliberate under-application of water to growing crops.

In this study we carried out an economic analysis of DI in sugarcane farming with an aim of developing an understanding of the economic impact of various irrigation water management strategies. The …

Patellar Tendon Morphology In Trans-Tibial Amputees Utilizing A Prosthesis With A Patellar-Tendonbearing Feature, Kai-Yu Ho, Michelle Harty, Jessica Kellogg, Kelly Teter, Szu-Ping Lee, Yu-Jen Chang, Gregory Bashford

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A patellar-tendon-bearing (PTB) bar is a common design feature used in the socket of trans-tibial prostheses to place load on the pressure-tolerant tissue. As the patellar tendon in the residual limb is subjected to the perpendicular compressive force not commonly experienced in normal tendons, it is possible for tendon degeneration to occur over time. The purpose of this study was to compare patellar tendon morphology and neovascularity between the residual and intact limbs in trans-tibial amputees and healthy controls. Fifteen unilateral trans-tibial amputees who utilized a prosthesis with a PTB feature and 15 age- and sex- matched controls participated. Sonography …

Stochastic Cost-Optimization And Risk Assessment Of In Situ Chemical Oxidation For Dense Non-Aqueous Phase Liquid (Dnapl) Source Remediation, Ungtae Kim, Jack C. Parker, Robert C. Borden

Civil and Environmental Engineering Faculty Publications

This study involved development of a computer program to determine optimal design variables for in situ chemical oxidation (ISCO) of dense nonaqueous phase liquid (DNAPL) sites to meet site-wide remediation objectives with minimum life-cycle remediation cost while taking uncertainty in site characterization data and model predictions into consideration. A physically-based ISCO performance model computes field-scale DNAPL dissolution, instantaneous reaction of oxidant with contaminant and with readily oxidizable natural oxidant demand (NOD), second-order kinetic reactions for slowly oxidizable NOD, and time to reach ISCO termination criteria. Remediation cost is computed by coupling the performance model with a cost module. ISCO termination …

Hybrid Localization: A Low Cost, Low Complexity Approach Based On Wi-Fi And Odometry, Letizia Moro, Hani Mehrpouyan

Electrical and Computer Engineering Faculty Publications and Presentations

Localization in indoor environments is essential to further support automation in a wide array of scenarios. Moreover, direction-of-arrival knowledge is essential to supporting high speed millimeter-wave (mmWave) links in indoor environments, since most mmWave links are of a line-of-sight nature to combat the high pathloss in this band. Accurate wireless localization in indoor environments, however, has proved a challenging task due to multi-path fading. Additionally, due to the effects of multi-path fading, methods such as trilateration alone do not result in accurate localization. As such, in this paper we propose to combine the knowledge of wireless localization methods with that …

Conceptual Groundwater Remedial Alternatives At Coal Combustion Residuals Sites†, Herwig Goldemund, Jeffrey M. Ahrens

Coal Combustion and Gasification Products Journal Archive

Groundwater below many basins that have been used to store coal combustion residuals (CCRs) may have concentrations of certain inorganic constituents in excess of applicable regulatory standards. Given that many inorganic CCR constituents are also naturally occurring in the aquifer matrix, their detection may not always be indicative of a release from the CCR unit. Inorganics may be present at elevated levels in groundwater due to natural or background conditions, or due to changes to the aquifer geochemistry resulting from the presence of the CCR basin, which then mobilizes these naturally occurring constituents beneath the CCR unit. Care must be …