Engineering Commons^™

Low-Cost Carbon Fibre Derived From Sustainable Coal Tar Pitch And Polyacrylonitrile: Fabrication And Characterisation, Omid Zabihi, Sajjad Shafei, Seyed Mousa Fakhrhoseini, Mojtaba Ahmadi, Hossein Ajdari Nazarloo, Rohan Stanger, Quang Anh Tran, John Lucas, Terry Wall, Minoo Naebe

Research outputs 2014 to 2021

Preparation of high-value pitch-based carbon fibres (CFs) from mesophase pitch precursor is of great importance towards low-cost CFs. Herein, we developed a method to reduce the cost of CFs precursor through incorporating high loading of coal tar pitch (CTP) into polyacrylonitrile (PAN) polymer solution. The CTP with a loading of 25% and 50% was blended with PAN and their spinnability was examined by electrospinning process. The effect of CTP on thermal stabilization and carbonisation of PAN fibres was investigated by thermal analyses methods. Moreover, electrospun PAN/CTP fibres were carbonised at two different temperatures i.e., 850 °C and 1200 °C and …

An Underground Radio Wave Propagation Prediction Model For Digital Agriculture, Abdul Salam

Faculty Publications

Underground sensing and propagation of Signals in the Soil (SitS) medium is an electromagnetic issue. The path loss prediction with higher accuracy is an open research subject in digital agriculture monitoring applications for sensing and communications. The statistical data are predominantly derived from site-specific empirical measurements, which is considered an impediment to universal application. Nevertheless, in the existing literature, statistical approaches have been applied to the SitS channel modeling, where impulse response analysis and the Friis open space transmission formula are employed as the channel modeling tool in different soil types under varying soil moisture conditions at diverse communication distances …

Nanogels And Microgels: From Model Colloids To Applications, Recent Developments, And Future Trends, Mattias Karg, Andrij Pich, Thomas Hellweg, Todd Hoare, L. Andrew Lyon, J. J. Crassous, Daisuke Suzuki, Rustam A. Gumerov, Stefanie Schneider, Igor I. Potemkin, Walter Richtering

Engineering Faculty Articles and Research

Nanogels and microgels are soft, deformable, and penetrable objects with an internal gel-like structure that is swollen by the dispersing solvent. Their softness and the potential to respond to external stimuli like temperature, pressure, pH, ionic strength, and different analytes make them interesting as soft model systems in fundamental research as well as for a broad range of applications, in particular in the field of biological applications. Recent tremendous developments in their synthesis open access to systems with complex architectures and compositions allowing for tailoring microgels with specific properties. At the same time state-of-the-art theoretical and simulation approaches offer deeper …

Non-Invasive Beam Monitoring With Harmonic Cavities, Brock F. Roberts

Electrical and Computer Engineering ETDs

NON INVASIVE BEAM MONITORING WITH HARMONIC CAVITIES

by

Brock Franklin Roberts

B.S PHYSICS, UNIVERSITY OF CALIFORNIA DAVIS, 1992

DOCTOR OF PHILOSOPHY IN ELECTRICAL ENGINEERING

UNIVERSITY OF NEW MEXICO, 2019

ABSTRACT

A cavity designed to have multiple harmonic TM0N0 modes can be used to accurately measure the longitudinal profile of a bunched charged particle beam passing through its bore, non-invasively, and in real time.

Multi-harmonic TM0N0 cavities were designed, constructed, and beamline tested in a variety of experiments at the Thomas Jefferson National Accelerator Facility (TJNAF or Jlab). Measurements with a sampling oscilloscope provided signals that resemble the profile of electron …

Metal-Insulator Transition (Mit) Materials For Biomedical Applications, Mohiuddin Munna, Protap Mahanta, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

Transitional metal oxides get considerable interest in electronics and other engineering applications over few decades. These materials show several orders of magnitude metal-insulator transition (MIT) triggered by external stimuli. Bio-sensing using Vanadium dioxide (VO₂), a MIT material is largely unexplored. In this short article, we investigate the VO₂ based thermal sensor performance for measuring the biomolecule concentration. Active sensing layer is chromium and niobium co-doped VO₂ as it shows 11.9%/°C temperature coefficient of resistance (TCR) with practically no thermal hysteresis. Our study demonstrated that VO₂ based microsensors can be used to measure the biomolecule concentrations, …

Cold Plasma Poration And Corrugation Of Pumpkin Seed Coats, Alexander G. Volkov, Jewel S. Hairston, Darayas Patel, Ryan P. Gott, Kunning G. Xu

PRC-Affiliated Research

The treatment of seeds and plants by electrically generated cold atmospheric pressure plasma can accelerate seed germination and radicle growing rates. The plasma generated reactive oxygen and nitrogen species, UV photons, and high frequency electromagnetic fields can penetrate into seed coats and modify their surface properties. Atomic force microscope data shows that cold helium or argon plasma induces strong corrugation of pumpkin seed coats, produces pores and surface defects. These structural deformations and poration enhance water uptake by seeds during the imbibing process, accelerate seeds germination, and increase seed growth. The cold atmospheric pressure plasmas treatment of pumpkin seeds also …

Engineering Education Students Present Research At The Aera Annual Meeting | College Of Engineering, Utah State University

College of Engineering News

Theresa Green and Darcie Christensen, two doctoral students in the Department of Engineering Education, presented research at the 2019 Annual Meeting of the American Education Research Association (AERA) held on April 5-9 in Toronto, Ontario, Canada.

Cold Plasma Poration And Corrugation Of Pumpkin Seed Coats, Alexander G. Volkov, Jewel S. Hairston, Darayas Patel, Ryan P. Gott, Kunning G. Xu

PRC-Affiliated Research

The treatment of seeds and plants by electrically generated cold atmospheric pressure plasma can accelerate seed germination and radicle growing rates. The plasma generated reactive oxygen and nitrogen species, UV photons, and high frequency electromagnetic fields can penetrate into seed coats and modify their surface properties. Atomic force microscope data shows that cold helium or argon plasma induces strong corrugation of pumpkin seed coats, produces pores and surface defects. These structural deformations and poration enhance water uptake by seeds during the imbibing process, accelerate seeds germination, and increase seed growth. The cold atmospheric pressure plasmas treatment of pumpkin seeds also …

Cold Plasma Poration And Corrugation Of Pumpkin Seed Coats, Alexander G. Volkov, Jewel S. Hairston, Darayas Patel, Ryan P. Gott, Kunning G. Xu

PRC-Affiliated Research

The treatment of seeds and plants by electrically generated cold atmospheric pressure plasma can accelerate seed germination and radicle growing rates. The plasma generated reactive oxygen and nitrogen species, UV photons, and high frequency electromagnetic fields can penetrate into seed coats and modify their surface properties. Atomic force microscope data shows that cold helium or argon plasma induces strong corrugation of pumpkin seed coats, produces pores and surface defects. These structural deformations and poration enhance water uptake by seeds during the imbibing process, accelerate seeds germination, and increase seed growth. The cold atmospheric pressure plasmas treatment of pumpkin seeds also …

Chaotic Lunar Capture Designs And Operations Of A Cubesat Using A Low Thrust System, Kennedy V. Haught

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Kennedy V. Haught on April 17, 2019.

Low-Dimensional Materials With Protective Coatings For Applications Under Extreme Conditions, Qiming Zou

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Traditional ceramic-based, conductive materials used under extreme conditions are severely limited due to their conditional electrical conductivity and poor stability under harsh circumstances. Advanced composite structures based on vertically aligned carbon nanotubes (VACNTs) and high-temperature ceramics are expected to address this grand challenge, in which ceramic serves as a shielding layer protecting the VACNTs from the oxidation and erosive environment, while the VACNTs work as a conductor. However, it is still a great challenge to fabricate VACNT/ceramic composite structures due to the limited infiltration of ceramics inside the VACNT arrays. Hence developing a feasible method to infiltrate ceramics into VACNT …

Artificial Intelligence In The Context Of Human Consciousness, Hannah Defries

Senior Honors Theses

Artificial intelligence (AI) can be defined as the ability of a machine to learn and make decisions based on acquired information. AI’s development has incited rampant public speculation regarding the singularity theory: a futuristic phase in which intelligent machines are capable of creating increasingly intelligent systems. Its implications, combined with the close relationship between humanity and their machines, make achieving understanding both natural and artificial intelligence imperative. Researchers are continuing to discover natural processes responsible for essential human skills like decision-making, understanding language, and performing multiple processes simultaneously. Artificial intelligence attempts to simulate these functions through techniques like artificial neural …

Adsorption Of Organic Micropollutants To Biosolids-Derived Biochar: Estimation Of Thermodynamic Parameters, Yiran Tong, Brooke K. Mayer, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

This research quantified thermodynamic parameters to better understand the use of wastewater biosolids-derived biochar as an adsorbent to remove micropollutants. The objective of this research was to quantify adsorption capacity; isosteric heat; and change of enthalpy, entropy, and free energy characterizing adsorption reactions between biochar and micropollutants. Adsorption isotherms were developed using a range of temperatures for the micropollutants benzyldimethyldecylammonium chloride (BAC-C10) Carbamazepine (CBZ), 17β-estradiol (E2), 17α-ethynylestradiol (EE2), and triclosan (TCS). The thermodynamic parameters derived from the isotherm data were used to assist in characterizing binding affinity, spontaneity, and mechanisms of adsorption. More polar compounds such as BAC-C10 and CBZ …

A High Magnification Uv Lens For High Temperature Optical Strain Measurements, Robert S. Hansen, Trevor J. Bird, Ren Voie, Katharine Z. Burn, Ryan B. Berke

Mechanical and Aerospace Engineering Faculty Publications

Digital Image Correlation (DIC) measures full-field strains by tracking displacements of a specimen using images taken before and after deformation. At high temperatures, materials emit light in the form of blackbody radiation, which can interfere with DIC images. To screen out that light, DIC has been recently adapted by using ultraviolet (UV) range cameras, lenses, and filters. Before now, UV-DIC had been demonstrated at the centimeter scale using commercially available UV lenses and filters. Commercial high-magnification lenses using visible light have also been used for DIC. However, there is currently no commercially available high-magnification lens that will allow images to …

Bathymetric Surveying In Lake Superior: 3d Modeling And Sonar Equipment Comparing, Eugene Levin, Guy Meadows, Roman Shults, Utku Karacelebi, Hasan Salih Kulunk

School of Technology Publications

This paper represents the overview of hydrographic surveying and different types of modern and traditional surveying equipment, and data acquisition using the traditional single beam sonar system and a modern fully autonomous underwater vehicle (AUV) IVER3. During the study, the data sets were collected using the vehicles of the Great Lake Research Center at Michigan Technological University. This paper presents how to process and edit the bathymetric data on SonarWiz5. Lastly, it compares the accuracy of the two different sonar systems in the different missions and creates 3D models to display and understand the elevations changes. Moreover, the 3D models …

Investigation Of Fouling Mechanisms On Ion Exchange Membranes During Electrolytic Separations, Matthew James Edwards

Honors Theses

The global water crisis is a major problem in our developing world due to the increasing growth of our global population, the depletion of natural water resources, and the continuing contamination of existing water resources as a result of industrialization. Membrane separation is a potential solution for these issues. Electrodialysis (ED) is a separation process which employs membranes to separate inorganic and organic substances. This study investigated how different fouling agents influenced membrane surface characteristic and separation efficiency within an electrodialysis system. While applicable for waste water, this study focuses on model salt water solutions with various fouling agents added …

End-To-End Learning: Using Neural Networks For Vehicle Control And Obstacle Avoidance, Keith Russell

Honors College Theses

End to End learning is a method of deep learning which has been used to great effect to solve complex problems which would normally be performed by humans. Within this thesis, a neural network was created to mimic the steering patterns of humans in highway driving situations. A Turtlebot was used in place of a car and was tested within a laboratory on a closed loop track to drive within the lanes created for it. The network architecture was based on that of Nvidia’s model which was used for predicting steering angles of a vehicle. The network was successfully trained …

Fabrication Of Photonic Lpcvd Silicon Nitride Waveguides, Robert Dalheim

Journal of the Microelectronic Engineering Conference

No abstract provided.

Single Electron Transistors For Molecular Computer Readout, Matthew Filmer

Journal of the Microelectronic Engineering Conference

No abstract provided.

Demonstration Of Record-High Mm-Wave Power Performance Using N-Polar Gallium Nitride Hemts, Brian Romanczyk

Journal of the Microelectronic Engineering Conference

Gallium Nitride high electron mobility transistors (GaN HEMTs) are proven to be well suited devices for highly efficient solid-state radio frequency power amplification, especially when high output power is desired. Existing GaN transistor technologies using the Ga-polar crystal orientation (0001) have been demonstrated operating at millimeter-wave frequencies (30 to 300 GHz). While these Ga-polar devices have demonstrated good large signal functionality, their performance has largely saturated. With growing interest in communication and imaging applications operating at mm-wave frequencies there is a need for transistors technologies with higher performance at these frequencies. This work focuses on the development and demonstration of …

Biristor Array Investigation, Jeremiah Leit

Journal of the Microelectronic Engineering Conference

No abstract provided.

Fefet Fabrication And Characterization At Rit, Jordan Merkel

Journal of the Microelectronic Engineering Conference

No abstract provided.

64th Conference On Senior Engineering Design, College Of Engineering And Applied Sciences

Senior Engineering Design Conference

The 64th Conference on Senior Engineering Design Projects. The conference was held from 8:00 a.m. to 4:00 p.m., Tuesday, April 16, 2019 at the College of Engineering and Applied Sciences on the Parkview Campus of Western Michigan University. The College of Engineering and Applied Sciences sponsors the conference to showcase the work of its graduating seniors, who are required to complete a capstone project that puts into practice what they have learned. Many of the projects are sponsored by business and industry.

New Clock-Driven Algorithm Based On Separation Of Synaptic Conductance Computation, Zhijie Wang, Peng Xia, Han Fang, Xiaochun Gu

Journal of System Simulation

Abstract: In order to reduce the computing time when simulating the biologic neural network, an efficient clock-driven algorithm based on the separation of synaptic conductance computation is presented. It is found that the calculation of the synaptic state variables can be separated into two independent parts: one called conductance coefficient related with the pre-synaptic neuron, and the other called synaptic current. By introducing the data structure of the virtual synapse cluster to storing sequences of synaptic conductance coefficient, the former part can be calculated independently according to the spiking states of pre-synaptic neuron at each time step. When calculating the …

Grasping Simulation Of Linkage Underactuated Mechanical Finger, Xiali Li, Tianyi Lan, Licheng Wu

Journal of System Simulation

Abstract: For verifying the design rationality and the property of a linkage underactuated finger, Solidworks is utilized to simulate the grasp operation of the finger with some different objects at the different positions. The simulations can be used to analyze the grasping range, the underactuated characteristic, the uniformity of grasp motion and the mechanical property. The finger mechanism contains springs that brings adaptive grasp capability of different objects. The results show that the finger can make suitable capability for grasping the objects whose size can vary from 0.106 to 0.851 times of the finger length. And the finger can give …

All-Optical Control Of Lead Halide Perovskite Microlasers, Nan Zhang, Yubin Fan, Kaiyang Wang, Zhiyuan Gu, Yuhan Wang, Li Ge, Shumin Xiao, Qinghai Song

Publications and Research

Lead halide perovskites based microlasers have recently shown their potential in nanophotonics. However, up to now, all of the perovskite microlasers are static and cannot be dynamically tuned in use. Herein, we demonstrate a robust mechanism to realize the alloptical control of perovskite microlasers. In lead halide perovskite microrods, deterministic mode switching takes place as the external excitation is increased: the onset of a new lasing mode switches off the initial one via a negative power slope, while the main laser characteristics are well kept. This mode switching is reversible with the excitation and has been explained via cross-gain saturation. …

Method And Apparatus For Fabricating Ceramic And Metal Components Via Additive Manufacturing With Uniform Layered Radiation Drying, Ming-Chuan Leu, Amir Ghazanfari, Wenbin Li, Greg Hilmas, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A freeform extrusion fabrication process for producing three - dimensional ceramic, metal and functionally gradient composite objects, including the steps of filling a plurality of paste sources with a respective plurality of aqueous paste compositions, operationally connecting respective syringes containing respective aqueous paste compositions to a mix ing chamber, moving a first aqueous paste composition from a first respective paste source into the mixing chamber, moving a second aqueous paste composition from a second respective paste source into the mixing chamber, mixing the first and second aqueous paste compositions to define a first admixture having a first admixture composition, extruding …

Seismic Performance Of Earth Slopes Subjected To Earthquake Mainshock – Aftershock Sequences, Alisha Khanal

Civil Engineering Theses

Mainshocks are usually followed by aftershocks. Aftershocks continue over a period of time with a decreasing frequency and there is not sufficient time for repair and retrofit between a mainshock – aftershock sequence. Typically, aftershocks are smaller in magnitude; however, aftershock ground motion characteristics such as the intensity and duration can be greater than the mainshock due to the changes in the earthquake mechanism and location with respect to the site. The seismic performance of slopes is typically evaluated based on the sliding displacement predicted to occur along a critical sliding surface. Various empirical models are available that predict sliding …

Metabolon-Inspired Design Of Multi-Modal Catalytic Cascade, Madelaine Seow Chavez

Chemical and Biological Engineering ETDs

Developing hybrid catalytic systems has been researched for the past decade in an effort to efficiently incorporate catalysts of different modalities in catalytic cascades. It has become imperative to design a cascade system where the catalysts are spatially organized to control the delivery of precursors, intermediates, and products. In this work, we have shown that a molecular catalyst, biocatalyst, and metallic catalyst can be co-localized using a carbonaceous support to create a hybrid catalytic system and complete the oxidation of oxalic acid to create a microchemical reactor. The molecular, pyrene-TEMPO catalyst oxidizes glyoxalic acid to oxalic acid. The enzyme oxalate …

Design And Performance Evaluation Of Linear And Axial-Flux Magnetic Gears, Mojtaba Bahrami Kouhshahi

Dissertations and Theses

The conversion from low speed to high speed and vice versa in various forms, including rotary and linear motion, is a requirement for a wide range of applications. For example, wind power generation requires a conversion of low speed rotation of turbine blades to high speed generator rotation, and ocean wave power generation is achievable by conversion of low speed linear motion to either high speed rotation or high speed linear motion. Mechanical gearboxes, hydraulic and pneumatic actuators are commonly used to achieve these conversions. However, these systems suffer from reliability issues, high maintenance requirements, noise, and lack of overload …