Engineering Commons^™

Rapid Profiling Of Soybean Aromatic Compounds Using Electronic Nose, Ramasamy Ravi, Ali Taheri, Durga Khandekar, Reneth Millas

Agricultural and Environmental Sciences Faculty Research

Soybean (Glycine max (L.)) is the world’s most important seed legume, which contributes to 25% of global edible oil, and about two-thirds of the world’s protein concentrate for livestock feeding. One of the factors that limit soybean’s utilization as a major source of protein for humans is its characteristic soy flavor. This off-flavor can be attributed to the presence of various chemicals such as phenols, aldehydes, ketones, furans, alcohols, and amines. In addition, these flavor compounds interact with protein and cause the formation of new off-flavors. Hence, studying the chemical profile of soybean seeds is an important step in understanding …

Static Accuracy Analysis Of Vicon T40s Motion Capture Cameras Arranged Externally For Motion Capture In Constrained Aquatic Environments, Shreyas L. Raghu, Chang-Kwon Kang, Paul Whitehead, Akifumi Takeyama, Ryan Conners

PRC-Affiliated Research

While the capabilities of land-based motion capture systems in biomechanical applications have been previously reported, the possibility of using motion tracking systems externally to reconstruct markers submerged inside an aquatic environment has been under explored. This study assesses the ability of a motion capture system (Vicon T40s) arranged externally to track a retro-reflective marker inside a glass tank filled with water and without water. The reflective tape used for marker creation in this study was of Safety of Life at Sea (SOLAS) grade as the conventional marker loses its reflective properties when submerged. The overall trueness calculated based on the …

Reversal Of Transmission And Reflection Based On Acoustic Metagratings With Integer Parity Design., Yangyang Fu, Chen Shen, Yanyan Cao, Lei Gao, Huanyang Chen, C T Chan, Steven A Cummer, Yadong Xu

Henry M. Rowan College of Engineering Departmental Research

Phase gradient metagratings (PGMs) have provided unprecedented opportunities for wavefront manipulation. However, this approach suffers from fundamental limits on conversion efficiency; in some cases, higher order diffraction caused by the periodicity can be observed distinctly, while the working mechanism still is not fully understood, especially in refractive-type metagratings. Here we show, analytically and experimentally, a refractive-type metagrating which can enable anomalous reflection and refraction with almost unity efficiency over a wide incident range. A simple physical picture is presented to reveal the underlying diffraction mechanism. Interestingly, it is found that the anomalous transmission and reflection through higher order diffraction can …

Static Accuracy Analysis Of Vicon T40s Motion Capture Cameras Arranged Externally For Motion Capture In Constrained Aquatic Environments, Shreyas L. Raghu, Chang-Kwon Kang, Paul Whitehead, Akifumi Takeyama, Ryan Conners

PRC-Affiliated Research

While the capabilities of land-based motion capture systems in biomechanical applications have been previously reported, the possibility of using motion tracking systems externally to reconstruct markers submerged inside an aquatic environment has been under explored. This study assesses the ability of a motion capture system (Vicon T40s) arranged externally to track a retro-reflective marker inside a glass tank filled with water and without water. The reflective tape used for marker creation in this study was of Safety of Life at Sea (SOLAS) grade as the conventional marker loses its reflective properties when submerged. The overall trueness calculated based on the …

Static Accuracy Analysis Of Vicon T40s Motion Capture Cameras Arranged Externally For Motion Capture In Constrained Aquatic Environments, Shreyas L. Raghu, Chang-Kwon Kang, Paul Whitehead, Akifumi Takeyama, Ryan Conners

PRC-Affiliated Research

While the capabilities of land-based motion capture systems in biomechanical applications have been previously reported, the possibility of using motion tracking systems externally to reconstruct markers submerged inside an aquatic environment has been under explored. This study assesses the ability of a motion capture system (Vicon T40s) arranged externally to track a retro-reflective marker inside a glass tank filled with water and without water. The reflective tape used for marker creation in this study was of Safety of Life at Sea (SOLAS) grade as the conventional marker loses its reflective properties when submerged. The overall trueness calculated based on the …

An Experimental Study On The Impacts Of Using Multiple Pdc Cutters On Rock Cutting Process, Kian Sheikhrezaei

LSU Doctoral Dissertations

The ultimate goal in drilling in oil and gas applications is to improve the rate of penetration (ROP) and one important factor that affects the ROP enhancement is Drill Bit. Today, PDC bit plays a significant role in drilling all types of formations. Besides the material development, bit design or a way of cutters arrangements on a bit is a regular challenge for bit designers to improve the bit performance. This concept has been experimentally studied in this work.

Different sets of cutters arrangements containing three PDC cutters on a flat bit profile have been used to conduct a variety …

A New Uav-Based Module Lifting And Transporting Method: Advantages And Challenges, Jin Choi, Dong Bin Kim

Civil and Environmental Engineering and Construction Faculty Research

The modular construction technique is the one key technology that can substantially advance the competitiveness of the construction industry. However, the industry is having difficulty creating an optimum environment for broader and more effective use of modularization due to one key barrier: implementing a modular construction technique, that is, shipping modules from the fabrication shop to the build site. Multiple issues are potentially challenging to overcome, such as module size and center of gravity, rigging, tie-down, site access, site congestion, and transportation regulations, as well as the availability of local heavy lift equipment. The researchers propose to implement drones as …

A Pilot Study Of Identifying Execution Plan Differences For Accelerated Bridge Construction, Jin Choi, Elina Prajapati

Civil and Environmental Engineering and Construction Faculty Research

Accelerated bridge construction (ABC) is an innovative construction technique used to accelerate the construction of new bridges, as well as the renovation/replacement of existing bridges. Due to the benefits offered by ABC, transportation authorities have a higher preference in executing an accelerated approach over conventional bridge construction. The execution of an accelerated approach has differences when compared to the conventional approach, and it is important to identify such differences for the successful implementation of ABC projects. However, there have been no studies to identify such execution differences. Therefore, this study was conducted to identify execution plan differences relevant to ABC. …

Calibrating Cii Rt283s Modularization Critical Success Factor Accomplishments, Jin Choi, James T. O’Connor, Young Hoon Kwak, Rajarshi Ghimire

Civil and Environmental Engineering and Construction Faculty Research

Modularization is a well-known construction technique where sections of the job are moved from on-site to a fabrication shop. Previously, the researchers identified the 21 most influential Critical Success Factors (CSFs) for successful modularization and quantified the degree of each CSF’s accomplishment by conducting a survey with 19 subject matter experts, and a case study with three modular projects. Through this methodology, the findings relied on the experience of experts. However, still missing from the understanding of modularization CSFs is a validation of the current degree of each CSF’s accomplishment by examining actual modular projects using a sufficient number of …

Investigating Stakeholders' Perceptions Of Feasibility And Implications Of Modular Construction-Based Post-Disaster Reconstruction, Pedram Ghannad, Yong-Cheol Lee, Jin Ouk Choi

Civil and Environmental Engineering and Construction Faculty Research

Natural Disasters cause major adverse social and financial effects by destroying homes and infrastructures. For example, Hurricane Katrina in August 2005 damaged over 214,700 homes in New Orleans and forced over 800,000 citizens to live outside of their homes due to flooding. Thus, these disasters require a quick and efficient response to post-disaster housing issues and provide resources for temporary houses for short-term disaster relief and reconstruction of destroyed and damaged housing for full rehabilitation. Reconstruction of permanent housing for disaster victims is one of the most time-consuming activities in the post-disaster recovery process. However, time is a critical factor …

Performance Enhancement Of Ssi-Leds And Geometrically Confinement Of Lighting Dots By Using Patterned Wafer Approaches, Shengli Wu, Yiwei Liu, Xiaoning Zhang, Can Yang, Lingguang Liu, Yaogong Wang, Gang Niu

Semiconductor Technology for Ultra Large Scale Integrated Circuits and Thin Film Transistors VII (ULSIC VS TFT 7)

Solid state incandescent light emitting devices (SSI-LEDs) were first demonstrated in 2013 by Kuo’s group, which have the metal-oxide-semiconductor structure and emit white light directly¹. The conductive filaments (CFs) through CAFM figures out that Si wafer has a significant impact on the device performance^{2, 3}, multiplayer dielectric layers structure have also been study to enhance the light emission⁴. We demonstrate two approaches to improve the performance of SSI-LEDs by using patterned wafer in this work.

Please click Additional Files below to see the full abstract.

Impact Of Oxygen Plasma Treatment On Carrier Transport And Molecular Adsorption In Graphene, Hongmei Li, Austin Singh, Ferhat Bayram, Anthony S. Childress, Apparao Rao, Goutam Koley

Publications

Impact of plasma treatment on graphene's transport properties and interaction with gas molecules has been investigated with Raman, X-ray photoelectron spectroscopy, and Hall measurements. Experimental results indicate the formation of nanocrystalline domains and the enhanced fraction of adsorbed oxygen following oxygen plasma treatment, which correlates with a significant reduction in carrier mobility and an increase in carrier density. The oxygen plasma treated graphene was found to exhibit much stronger sensitivity toward NH3 molecules both in terms of magnitude and response rate, attributable to increased domain edges and oxygen adsorption related enhancement in p-type doping. The carrier mobility in plasma exposed …

Effects On Strength And Corrosive Characteristics Of Hardened Cement Paste Using Rice Husk And Sugarcane Bagasse, Travis D. Garrett

Master's Theses

Cement is one of the most used building materials in the world. The production of ordinary Portland cement contributes to the release of harmful greenhouse gasses. In an effort to reduce these emissions, different materials are being evaluated for their use as partial replacements for ordinary Portland cement. Rice husk and sugarcane bagasse are agricultural waste products and large amounts of these are currently landfilled, making them inexpensive and available. When combusted at high temperatures they form rice husk ash and sugarcane bagasse ash that have pozzolanic characteristics. The high silicon dioxide in these products makes them good options to …

Total Fume Emissions And Emission Factors Applicable To Gas Metal Arc Welding, Nayara De Souza

LSU New Orleans Theses and Dissertations

Welding is a common industrial practice that has the potential to emit air pollutants. Emission factors are useful indicators to help in the understanding of the extent of pollution from a process and managing them to reduce or minimize health impacts. The objective of this thesis is to determine emission factors applicable to the gas metal arc welding (GMAW), under varying current and voltage conditions. The most used base metals and an electrode for the shipbuilding industry were considered. A weld fume chamber was used to achieve the project goals along with standard sampling and analytical procedures. Three test runs …

Stackcbpred: A Stacking Based Prediction Of Protein-Carbohydrate Binding Sites From Sequence, Suraj Gattani

LSU New Orleans Theses and Dissertations

Carbohydrate-binding proteins play vital roles in many vital biological processes and study of these interactions, at residue level, are useful in treating many critical diseases. Analyzing the local sequential environments of the binding and non-binding regions to predict the protein-carbohydrate binding sites is one of the challenging problems in molecular and computational biology. Prediction of such binding sites, directly from sequences, using computational methods, can be useful to fast annotate the binding sites and guide the experimental process. Because the number of carbohydrate-binding residues is significantly lower than non-carbohydrate-binding residues, most of the methods developed are biased towards over predicting …

Geotechnical And Geothermal Properties Of Louisiana Coastal Sediments, Myriam Bou-Mekhayel

LSU New Orleans Theses and Dissertations

Land loss in South Louisiana is increasing at a fairly rapid rate. In an effort to reduce land loss and save the marshes of Louisiana, marsh creation projects have been proposed in carefully selected regions around the coast as part of the CPRA Coastal Master Plan 2017. Properties and characteristics of the soil obtained from soil borings were analyzed and used to determine the various design parameters that allow the marsh creation process to occur. Other properties that were taken into consideration for Louisiana coastal sediment are the geothermal properties.

This research analyses those different properties obtained from geotechnical reports …

Modeling The Effect Of A Compartment Fire On Spaces Adjacent To A Bulkhead With And Without Attachments, Carl E. Hendrickson Ii

LSU New Orleans Theses and Dissertations

Structural fire protection is an integral component of shipboard fire safety. There are national and international regulations that delineate requirements for the insulation placed throughout ships. The attachments that penetrate the insulation for hanging wires and pipes can disrupt the integrity of the division, and cause a failure to adhere to the regulations. This problem will be analyzed by using a simplified lumped capacitance model and ANSYS FLUENT CFD. A standard time-temperature fire curve is applied to the fire side of the enclosure. The thermal conductivity of the insulation and steel are made to be temperature dependent. The density of …

Directional Comparison Bus Protection Using Superimposed Partial Operating Current Characteristics, Bishwas Baral

LSU New Orleans Theses and Dissertations

Various directional comparison bus protection methods including widely used superimposed directional element method need to have both voltages and currents from all feeders connected to the zone of protection to find the direction of current for detecting a bus fault or a line fault. The purpose of the thesis is to present a new technique for directional comparison bus protection to discriminate a bus fault from line fault and normal condition. The new technique, which is implementing superimposed directional element method to modify partial operating current characteristics (POC) method to superimposed POC (SPOC) method, does not use voltages from feeders, …

Evaluation Of Total Fume And Heavy Metal Emission Factors Applicable To Gas Metal Arc Welding, Abhinay Jilla

LSU New Orleans Theses and Dissertations

Welding is a metal joining process widely used in many manufacturing facilities around the world. It involves the process of heating the base and filler metals to a high temperature that leads to the formation of fumes. Welding emissions consist of gaseous pollutants and micron and sub-micron particles consisting of different heavy metals. Health risks associated with exposures to weld fume is well recognized in the literature. This research evaluates emissions and emission factors applicable to gas metal arc welding (GMAW) on AH 36 (mild steel) and 316 L (stainless steel). Emission factors evaluated consisted, total fume, chromium, cobalt, lead, …

Detection Of Sand Boils From Images Using Machine Learning Approaches, Aditi S. Kuchi

LSU New Orleans Theses and Dissertations

Levees provide protection for vast amounts of commercial and residential properties. However, these structures degrade over time, due to the impact of severe weather, sand boils, subsidence of land, seepage, etc. In this research, we focus on detecting sand boils. Sand boils occur when water under pressure wells up to the surface through a bed of sand. These make levees especially vulnerable. Object detection is a good approach to confirm the presence of sand boils from satellite or drone imagery, which can be utilized to assist in the automated levee monitoring methodology. Since sand boils have distinct features, applying object …

Scalable Community Detection Using Distributed Louvain Algorithm, Naw Safrin Sattar

LSU New Orleans Theses and Dissertations

Community detection (or clustering) in large-scale graph is an important problem in graph mining. Communities reveal interesting characteristics of a network. Louvain is an efficient sequential algorithm but fails to scale emerging large-scale data. Developing distributed-memory parallel algorithms is challenging because of inter-process communication and load-balancing issues. In this work, we design a shared memory-based algorithm using OpenMP, which shows a 4-fold speedup but is limited to available physical cores. Our second algorithm is an MPI-based parallel algorithm that scales to a moderate number of processors. We also implement a hybrid algorithm combining both. Finally, we incorporate dynamic load-balancing in …

Proposed New Military Live Load For Highway Bridges In The United States, Walter P. Parker

LSU New Orleans Theses and Dissertations

This thesis presents the results of a mathematical analysis of various live load combinations on highway bridge spans up to 304.8 meters (1,000 feet) total lengths. The analysis included continuous beams, but only the results for simple beams is presented. The analysis was performed using an independently developed Microsoft EXCEL spreadsheet computation, based on superposition and classical mechanics.

In this thesis, several actual bridge live loadings and several hypothetical live loadings were analyzed and compared to the American Association of State Highway and Transportation Officials Load and Resistance Factor Design method. Also considered was the new bridge design method adopted …

Using Thermal Gradient Measurements To Compare Bath Temperature And Agitation Effects On The Quenching Performance Of Palm Oil, Canola Oil And A Conventional Petroleum Oil, Bozidar Matijevic, Bruno F. Canale, Božidar Lišcic, George Totten

Mechanical and Materials Engineering Faculty Publications and Presentations

A proprietary Liscic/Petrofer cylindrical Inconel 600 probe of 50-mm diameter and 200-mm length which was instrumented with three thermocouples on the same radius of the crosssection at the middle of the length was used to determine the differences in quenching performance of two vegetable oils, palm oil and canola oil, and they were compared to a locally produced conventional petroleum oil quenchant. The cooling curves and heat transfer performance of these oils were determined at different bath temperatures and agitation rates. The work was performed at the Quenching Research Centre located at the Faculty for Mechanical Engineering, University of Zagreb, …

Statistical Viability Analysis Of United States Air Force Estimating Cost Factor For Sustainable Construction, Philip A. Ramsey, Diedrich Prigge, Torrey J. Wagner, Alfred E. Thal Jr.

Faculty Publications

Varying legislation and executive orders coupled with needs for energy resiliency have led the United States Air Force (USAF) to pursue sustainable construction. However, the limited understanding of initial costs to implement these changes have contributed to poor project cost estimating, resulting in 62 percent of USAF projects experiencing more than 5 percent cost growth. After reviewing 1628 USAF Military Construction (MILCON) construction projects in 922 category codes (CATCODEs), a twotailed t-test for populations with unequal variance was accomplished on the final normalized contract cost for 340 projects in 16 CATCODEs executed between 2002 and 2017. This analysis provides a …

Non-Canonical Amino Acid Labeling In Proteomics And Biotechnology, Aya M. Saleh, Kristen M. Wilding, Sarah Calve, Bradley Charles Bundy, Tamara L. Kinzer-Ursem

Faculty Publications

Metabolic labeling of proteins with non-canonical amino acids (ncAAs) provides unique bioorthogonal chemical groups during de novo synthesis by taking advantage of both endogenous and heterologous protein synthesis machineries. Labeled proteins can then be selectively conjugated to fluorophores, affinity reagents, peptides, polymers, nanoparticles or surfaces for a wide variety of downstream applications in proteomics and biotechnology. In this review, we focus on techniques in which proteins are residue- and site-specifically labeled with ncAAs containing bioorthogonal handles. These ncAA-labeled proteins are: readily enriched from cells and tissues for identification via mass spectrometry-based proteomic analysis; selectively purified for downstream biotechnology applications; or …

Very High Frequency Bipolar Junction Transistor Frequency Multiplier Drive Network Design And Analysis, Daniel Dale Schaeffer

Dissertations and Theses

The function of a frequency multiplier is verbatim -- a frequency multiplier is a circuit that takes a signal of particular frequency at the input and produces harmonic multiples of the input signal's frequency at the output. Their use is widespread throughout history, primarily in the application of frequency synthesis. When implemented as a part of a large system, a chain of multipliers can be used to synthesize multiple reference signals from a single high-performance reference oscillator.

Frequency multiplier designs use a variety of nonlinear devices and topologies to achieve excitation of harmonics. This thesis will focus on the design …

A Simplified Crossing Fiber Model In Diffusion Weighted Imaging, Sheng Yang, Kaushik Ghosh, Ken Sakaie, Satya S. Sahoo, Sarah J. Ann Carr, Curtis Tatsuoka

Mathematical Sciences Faculty Research

Diffusion MRI (dMRI) is a vital source of imaging data for identifying anatomical connections in the living human brain that form the substrate for information transfer between brain regions. dMRI can thus play a central role toward our understanding of brain function. The quantitative modeling and analysis of dMRI data deduces the features of neural fibers at the voxel level, such as direction and density. The modeling methods that have been developed range from deterministic to probabilistic approaches. Currently, the Ball-and-Stick model serves as a widely implemented probabilistic approach in the tractography toolbox of the popular FSL software package and …

Development Of Traffic Live Load Models For Bridge Superstructure Rating With Rbdo And Best Selection Approach, Sasan Siavashi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

Reliability-based design optimization (RBDO) is frequently used to determine optimal structural geometry and material characteristics that can best meet performance goals while considering uncertainties. In this study, the effectiveness of RBDO to develop a rating load model for a set of bridge structures is explored, as well as the use of an alternate Best Selection procedure that requires substantially less computational effort. The specific problem investigated is the development of a vehicular load model for use in bridge rating, where the objective of the optimization is to minimize the variation in reliability index across different girder types and bridge geometries. …

David G. Tarboton Named Utah Water Research Lab Director | College Of Engineering, Utah State University

College of Engineering News

One of the state’s largest research laboratories is getting a new director. David Tarboton, a professor of civil and environmental engineering at Utah State University, will lead the Utah Water Research Laboratory beginning July 1.

Triperyleno[3,3,3]Propellane Triimides: Achieving A New Generation Of Quasi-D3h Symmetric Nanostructures In Organic Electronics, Lingling Lv, Josiah Roberts, Chengyi Xiao, Zhenmei Jia, Wei Jiang, Chad Risko, Lei Zhang

Chemistry Faculty Publications

Rigid three-dimensional (3D) polycyclic aromatic hydrocarbons (PAHs), in particular 3D nanographenes, have garnered interest due to their potential use in semiconductor applications and as models to study through-bond and through-space electronic interactions. Herein we report the development of a novel 3D-symmetric rylene imide building block, triperyleno[3,3,3]propellane triimides (6), that possesses three perylene monoimide subunits fused on a propellane. This building block shows several promising characteristics, including high solubility, large π-surfaces, electron-accepting capabilities, and a variety of reactive sites. Further, the building block is compatible with different reactions to readily yield quasi-D_3h symmetric nanostructures (9, …