Engineering Commons^™

Bridges: Synthesis Of Load Histories And Analysis Of Fatigue, James H. Havens, Robert C. Deen

Kentucky Transportation Center Research Report

Repeated stressing of metals above certain limits induces inter- and intra-crystalline dislocations and cleavages and eventually cracks which propagate to failure. Some authorities consider crack propagation to be a separate and discrete stage in the failure process. The internal damage is insidiously cumulative and irreversible. This phenomenon was recognized as early as 1829 and was termed fatigue as early as 1839(1). From the beginning of fatigue testing (Wohler, 1858-1870), results have been reported as S-N, S-log N, or log S-log N curves, where N is the number of repetitions of stress S. From a structural design point of view, …

The Plasma Polymerization Of Vinyl Monomers. I. The Design, Construction, And Operation Of An Inductively Coupled Plasma Generator And Preliminary Studies With Nine Monomers, L. F. Thompson, Kenneth G. Mayhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

An apparatus was constructed which would allow vinyl‐type monomers (and others) to polymerize at ambient temperatures in the presence of an inductively coupled RF field. The details of the construction of the system are reported along with preliminary results obtained from nine monomers: styrene, methylvinyldichlorosilane, vinyl acetate, acrylonitrile, vinyl fluoride, 1,1‐difluoroethylene, vinyl chloride, ethylene, and 1,3‐butadiene. Copyright © 1972 John Wiley & Sons, Inc.

Saturated Enthalpies For Mixtures Of Propane And Propene, David B. Manley, George W. Swift

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

The Plasma Polymerization Of Vinyl Monomers. Ii. A Detailed Study Of The Plasma Polymerization Of Styrene, L. F. Thompson, Kenneth G. Mayhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

A study has been made on the plasma polymerization of styrene monomer in a cold, low‐power, inductively coupled RF plasma. Styrene monomer yielded an insoluble, crosslinked film which was slightly colored. A kinetic study is reported for styrene. The effects of power level, bleed rate of monomer, pressure, and reactor geometry on the rate of polymer formation are reported. A mechanism is postulated for plasma polymerization. It was found that the initiation step was the rate controlling step and that the reaction followed a cationic polymerization scheme. Both crosslinking and discoloration of the polymers occur at the time of polymerization …

Characterization Of Poly(Methyl Methacrylate) From Radiation‐Induced Polymerization In The Presence Of A Kaolin Clay Substrate, J. J. Beeson, Kenneth G. Mayhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Two types of polymer are formed in the radiation‐initiated polymerization of methyl methacrylate (MMA)–kaolin clay complexes. Homopolymer can be extracted from the complex by the use of organic solvents. Inserted polymer must be removed by dissolution of the polymer–clay complex with hydrofluoric acid. The polymers formed show no differences in structure (as determined by infrared analysis), had high molecular weights (1–5 x 106), and had similar molecular weight distributions (as determined by GPC). The molecular weights of the homopolymer increased as temperature increased (25°–75°C), and dose rate decreased (24.9–7.35 rads/sec). The isotacticity of the polymers when compared to irradiated bulk …

An Experimental And Numerical Study Of Elastic Strain Waves On The Center Line Of A 6061-T6 Aluminum Bar, J. L. Habberstad, K. G. Hoge, J. Earl Foster

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The elastic strain waves resulting from the impact of two 3/4-in-dia 6061-T6 aluminum bars are studied experimentally and analytically. Experimental data are obtained from strain gages on the center line and outer surface of the bar, located at various distances from the impact end of the bar. Experimental data are compared to numerical results obtained from integrating the exact equations of two-dimensional motion. In general, agreement between the numerical and experimental results is very good. © 1972 by ASME.

An Application Of Bubble Shape Theory To The Determination Of Air Transfer Through Adsorbed Surface Films, Robert A. Medrow

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Magnetohydrodynamic Stability Of The Developing Laminar Flow In A Parallel-Plate Channel, T. S. Chen, T. E. Eaton

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Linear stability of the developing laminar flow of an electrically conducting, incompressible fluid in a parallel-plate channel under a transverse magnetic field is investigated. The case of small magnetic Reynolds numbers is treated. The developing flows whose stability characteristics are studied correspond to those induced by a uniform and a parabolic velocity distribution at the channel inlet. The stability of the fully developed Hartmann flow is also reexamined. Neutral stability curves and axial variations of the critical Reynolds number are presented for a range of Hartmann numbers between 0 and 4. It is found that for Hartmann numbers larger than …

Finite-Element Analysis Of Pressure Vessels, Robert L. Davis, H. Dean Keith

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The finite-element technique has been applied in the analysis of a variety of pressure vessel problems. The example problems described in this paper suggest that the finite element method is perhaps the most suitable means currently available for obtaining quick and accurate solutions for real-life pressure vessel problems. Finite-element programs can be used by the practicing engineer. Companion programs are available that can be used to check the input data and graphically display both the input and output data. © 1972 by ASME.

A Strain Energy Comparison Of Discrete Modeling For Vibrating Continuous Systems, S. K. Tolani, Richard Dale Rocke

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Lumped parameter models commonly used to describe continuous one-dimensional and Bernoulli-Elder beam vibration problems have been compared on the basis of maximum system, strain energy. The consistent mass matrix approach has been included in the comparison. Standard matrix techniques have been employed to mathematically obtain desired solutions. Closed form solutions and solutions via the models to Ike system strain energy were obtained for all systems in three dynamic states: Free vibrations, constant base acceleration, and half sine base acceleration. Behavior of the strain energy errors, in general, were found to be similar to those of the frequency root errors. © …

The Hydraulics Of Waste Stabilization Ponds, Gary Z. Watters

Reports

The treatment efficiency of waste stabilization ponds depends primarily on the biological factors of type of waste and organic loading. However, the biological activity in a pond is greatly influenced by the environmental conditions of temperature, wind, sunlight, and the hydraulic flow patterns. In the past little attention has been given to the hydraulic characteristics of waste stabilization ponds such as the gross flow patterns within stabilization ponds as affected by the shape of the pond or lagoon, the presence of dead spaces, and positioning of inlets and outlets and the degree of density stratification. These hydraulic flow characteristics will …

The Great Salt Lake And Utah's Water Resources , Utah Water Research Laboratory

Reports

Introduction: It is appropriate to introduce these proceedings with a brief description of this history and objectives of the American Water Resources Association (AWRA). Quoting from a recent information borchure published by the AWRA, it is a non-profit, scientific organization that was incorporated in the State of Illinous in March, 1964, with headquarters in Urbana, Illinois. A major factor in the establishment of the AWRA was the need for an organization to encourage and foster interdisciplinary communication between professionals of diverse backgrounds working on all aspects of water resources problems. The principal objectives of AWRA are stated briefly as follows: …

Optimizing Resistance Coefficients For Large Bed Element Streams, D. E. Overton, Harl E. Judd, C. W. Johnson

Reports

This is a report of a comparison of Darcy resistance coefficients calculafed for previously reported laboratory data and those calculated for large bed element streams. Large bed element (LBE) streams exist frequently in nature where rocks derived from valley walls or from channels cutting through ancient glacial or fluvial deposits are moved only under conditions of extreme flood. The height of bed elements is a significant part of the mean depth of flow. The stream gradients are high and are quite stable for all but the highest flows.

Effects Of Land Use On Water Quality: Summit Creek, Smithfield, Utah, David W. Meyers, E. Joe Middlebrooks, Donald B. Porcella

Reports

The effects of various land uses on water quality in Summit Creek were evaluated during the period beginning March 13, 1971, and ending October 27, 1971. Potential sources of pollution investigated where: (1) septic tank use, (2) feedlot runoff, (3) urban runoff, (4) rural runoff. Samples were collected from five sampling stations on 16 separate days during the sampling period. Analyses were performed to determine the following constituents: ammonia, nitrite, nitrate, total phosphorus, orthophosphate, coliform bacteria, chloride, suspended solids, volatile suspended solids, total carbon, organic carbon, temperature, and pH. Agricultural activates, including livestock feedlot operations, were identified as the major …

Experimental Study Of Water Hammer In Buried Pvc And Permastran Pipes, Roland W. Jeppson, Gordon H. Flammer, Gary Z. Watters

Reports

No abstract provided.

Model Study Of The Manifold To Be Used As A Component Of The Virginia Electric And Power Company, 1974 Extension Of Yorktown Power Station, Roland W. Jeppson, Calvin G. Clyde, Charles Kincaid

Reports

Introduction: This report describes the fabrication and laboratory testing of a 1/12 scale model of the 5 branch converging manifold to be installed as a component of the Virginia Electric and Power Company 1974 extension of the Yorktown power station. The design of the manifold (see Fig. 1) was supplied by Brown & Root, Inc. The geometry of Branch number 1 as shown on Fig. 1 was modified slightly from the original design after conferring with Browth & Root, Inc. in order to facilitate the fabrication of this branch of the model. In addition to the fabrication of the manifold …

Studies To Develop And Investigate An Inverse Formulation For Numerically Solving Three-Dimensional Free Surface Potential Fluid Flows, Roland W. Jeppson

Reports

An inverse formulation is developed for solving three-dimensional potential fluid flows which considers the magnitudes of the cartesian coordinates x, y, and z as the dependent variables in the space defined by the potential function and two mutually orthogonal stream surface functions whose intersection defines the physical space streamlines. This formulation reverses the usual role of the variables. In this inverse space irregular boundaries, with unknown position in the physical space, such as free surfaces become plane boundaries, and the space of most potential flow problems is a parallelepiped. The basin partial differential equations resulting from this formulation are nonlinear …

Limitations Of Some Finite Difference Methods In Solving The Strongly Nonlinear Equation Of Unsaturated Flow In Soils, Roland W. Jeppson

Reports

No abstract provided.

Relationships Of Infiltration Characteristics To Parameters Describing The Hydraulic Properties Of Soils, Roland W. Jeppson

Reports

No abstract provided.

Calibration Of Parshall Flumes With Non-Standard Entrance Transitions, Cheng-Lung Chen, Calvin G. Clyde, Min-Shoung Chu, Chi-Yuan Wei

Reports

The 9-ince and 18-inch Parshall flumes with the throat section installed level with the bottom of an incoming pipe were tested. The measured discharges for given flow depths (free flow) or differences in flow depths (submerged flow) were found to deviate quite significantly fromt he computed standard Parshall flume disharges at both low and high flow rates. New empirical formulats have been developed to take such deviations into account. It is noted that values of the coefficients and exponents contained in the new formulas depend on the throat size of the flume and the slope of the incoming pipe. Calibration …

Water Resources Planning To Satisfy Growing Demand In An Urbanizing Agricultural Region, Thomas C. Anderson

Reports

Although it is condeded that an adequate supply of water is essential to economic growth and development, what constitutes an "adequate" supply is often controversial and difficult to determine. The problem can be solved by applying basin economic concepts: determining the value of water be estimating its supply and demand. This report demonstrates one method for doing this. The theory of the demand for irrigation water and its empirical application are discussed. An example problem based on data from one of the sub-regions of the study area (the Jordan River Basin of Utah) is presented to illustrate the method. The …

Chronological Listing Of Research Reports, Division Of Research, Kentucky Department Of Highways

Kentucky Transportation Center Research Report

No abstract provided.

Experimental Overlay Of Glazon Over Two Bridge Decks, Assaf S. Rahal, A. B. Blankenship

Kentucky Transportation Center Research Report

In accordance with a Personal Service Agreement entered into with the Glazon Industries, Inc., on July 2, 1971, the two subject decks were patched and overlayed with Glazon. On July 27, 1971, work started on RP 106-286-HG3, KY 395 bridge over I 64 in Shelby County. Work consisted of routing old concrete and sandblasting the surface (Figures 1 and 2). State personnel and equipment were used for all cleaning operations. The same procedures were followed to clean HM 99-1324A-MB3 in Powell County near Clay City.

On July 28, 1971, Glazon personnel and equipment arrived at the work site in Shelby …

Subject Listing Of Research Reports, Division Of Research, Kentucky Department Of Highways

Kentucky Transportation Center Research Report

No abstract provided.

Test 1091: Deutz D60 06 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1099: International Utility 574 Diesel (Also International 574 Row Crop Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1100: John Deere 6030 Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1101: John Deere 7520 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1094: International Farmall 766 Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1103: Case 1270 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …