Engineering Commons^™

Computer Education Program Schedule, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Phase 1 Inspection Report: National Dam Safety Program. Mississippi - Kaskaskia - St. Louis Basin. Ditch Creek Dam, Washington County, Missouri, Woodward-Clyde Consultants, Chicago, Illinois

Missouri Dam Safety Inspection Reports

This report presents the results of field inspection and evaluation of Ditch Creek Dam. It was prepared under the National Program of Inspection of Non-Federal Dams.

The inspection results indicate problems with the spillway adequacy. Although the dam is capable of passing the PMF without overtopping, the lack of a proper spillway and discharge channel and the need to pass runoff over a public transportation route (State Highway H) indicates a deficiency at this facility.

Phase 1 Inspection Report: National Dam Safety Program. Mississippi - Kaskaskia - St. Louis Basin. Cadet Mine Tailings Dam, Washington County, Missouri, International Engineering Company, Inc. Consulting Engineers, San Francisco, California

Missouri Dam Safety Inspection Reports

This report presents the results of field inspection and evaluation of the Cadet Mine Tailings Dam. It was prepared under the National Program of Inspection of Non-Federal Dams.

Phase 1 Inspection Report: National Dam Safety Program. Mississippi - Kaskaskia - St. Louis Basin. Lac Benet Dam, St. Francois County, Missouri, Hoskins-Western-Sonderegger, Inc. Consulting Engineers, Lincoln, Nebraska

Missouri Dam Safety Inspection Reports

This report presents the results of field inspection and evaluation of the Lac Benet Dam (MO 30281).

It was prepared under the National Program of Inspection of Non-Federal Dams.

This dam has been classified as unsafe, non-emergency by the St. Louis District as a result of the application of the following criteria:

a. Spillway will not pass 50 percent of the Probable Maximum Flood without overtopping the dam.

b. Overtopping of the dam could result in failure of the dam.

c. Dam failure significantly increases the hazard to loss of life downstream.

Phase 1 Inspection Report: National Dam Safety Program. Mississippi - Kaskaskia - St. Louis Basin. Little Indian Creek Dam, Washington County, Missouri, Woodward-Clyde Consultants, Chicago, Illinois

Missouri Dam Safety Inspection Reports

This report presents the results of field inspection and evaluation of the Little Indian Creek Dam (MO 30718).

It was prepared under the National Program of Inspection of Non-Federal Dams.

This dam has been classified as unsafe, non-emergency by the St. Louis District as a result of the application of the following criteria:

a. This dam retains less than 50 percent of the Probable Maximum Flood without overtopping the embankment.

b. Overtopping of the embankment could result in failure of the dam.

c. Dam failure significantly increases the hazard to loss of life downstream.

Phase 1 Inspection Report: National Dam Safety Program. Mississippi -St. Francis Basin. Nims Lake Dam, Washington County, Missouri, Woodward-Clyde Consultants, Chicago, Illinois

Missouri Dam Safety Inspection Reports

This report presents the results of field inspection and evaluation of Nims Lake Dam, Missouri Inventory Number 30064.

It was prepared under the National Program of Inspection of Non-Federal Dams.

This dam has been classified as unsafe, non-emergency by the St. Louis District as a result of the application of the following criteria:

a. Spillway will not pass 50 percent of the Probable Maximum Flood without overtopping the dam.

b. Overtopping of the dam could result in failure of the dam.

c. Dam failure significantly increases the hazard to loss of life downstream.

Rubber Covered Rolls-The Nonlinear Elastic Problem, R. C. Batra

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The problem of the indentation of a rubberlike layer bonded to a rigid cylinder and indented by another rigid cylinder is analyzed. The rubberlike layer is assumed to be made of a homogeneous Mooncy-Rivlin material. The materially and geometrically nonlinear problem is solved by using the finite-element code developed by the author. Results computed and presented graphically include the pressure profile at the contact surface, stress distribution at the bond surface and the deformed shape of the indented surface. © 1980 by ASME.

The Influence Of Harvesting Strategies And Economic Constraints On The Feasibility Of Farm Grain Drying And Storage Facilities, Otto J. Loewer Jr., Thomas C. Bridges, G. M. White, Douglas G. Overhults

Biosystems and Agricultural Engineering Faculty Publications

The economic return to on-the-farm grain drying and storage facilities is influenced by many factors including harvesting strategies, facility management, market conditions, energy considerations, and facility design. This study evaluates the influence of these factors on expected net return.

Economic Comparison Of Alternative Burley Tobacco Harvesting Practices By Computer, Thomas C. Bridges, Larry G. Wells, George A. Duncan, John N. Walker

Biosystems and Agricultural Engineering Faculty Publications

The computer model CATCH (Computer Analysis of Tobacco Cutting and Housing) was developed to provide the individual tobacco producer with management information concerning alternative methods of harvesting burley tobacco. CATCH utilizes specific producer in-puts to analyze 24 alternative burley production systems and presents up to four economic rankings containing costs, equipment and labor for each system. The economic rankings aid the producer in decision making with regard to his own operation.

A Survey And Analysis Of Electrical Engineering Curricula In Communications And Signal Processing, Rodger E. Ziemer, William H. Tranter

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

An Improved Technique For Calibrating And Testing Power System Generator Automatic Synchronizing And Speed Matching Relays, David C. Nagy, Earl F. Richards

Electrical and Computer Engineering Faculty Research & Creative Works

The design of a unique special purpose instrument for calibrating and testing power system automatic synchronizing and speed matching relays is described. The unit is constructed using inexpensive integrated circuit components and provides a direct digital readout of slip frequency from 0.05 Hz to 0.50 Hz resolution and advance angle from 0 to 99.9 degrees with 0.1-degree resolution. This device eliminates the need for expensive test equipment previously required, expedites the test procedure and solves the problem of referencing against a variable bus frequency source. Copyright © 1980 by The Institute Of Electrical and Electronics Engineers, Inc.

Traffic Speed Report No. 111 : Interim Report, Richard Philip Guenthner, George K. Stafford

JTRP Technical Reports

No abstract provided.

Determination Of Contract Time Durations For Ishc Highway Construction Projects, James E. Rowings

JTRP Technical Reports

No abstract provided.

A Cost Effectiveness Approach For The Evaluation Of Highway Safety Improvements In The State Of Indiana, Taro Kaji

JTRP Technical Reports

No abstract provided.

Thin, Applied Surfacing For Improving Skid Resistance Of Concrete Pavements, Charles F. Scholer

JTRP Technical Reports

No abstract provided.

Brochure: John Deere Waterloo Works, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1359: John Deere 4040 Syncro Range Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1364: Massey-Ferguson Mf205-4 Diesel 6-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1367: Massey-Ferguson Mf220 Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1370: Kubota L295 Dt Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1371: Kubota L305 Dt Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1372: Kubota L345 Dt Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1373: White Iseki 2-30 Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Luminescence In Slipped And Dislocation-Free Laser-Annealed Silicon, R.H. Uebbing, P. Wagner, H. Baumgart, H. J. Queisser

Electrical & Computer Engineering Faculty Publications

Photoluminescence of cw laser-annealed silicon shows a dramatic difference in electronic behavior of the reconstructed material depending upon either creation or suppression of dislocations. Beyond a critical exposure time slip appears, and the luminescence of these samples is dominated by dislocation-related defect levels.

Use Of Extreme Value Theory In Estimating Flood Peaks From Mixed Populations, Ronand V. Canfield, D. R. Olsen, R. H. Hawkins, T. L. Chen

Reports

The flood magnitude for a given frequency or return period is estimated by fitting a probability distribution to the historical annual flood series. The log-Pearson type III distribution has been selected by the Water Resources Council for general use by the federal government, but practitioners should examine an annual flood series and use alternative distributions where they will produce better estimates. Empirical goodness of fit is one criterion for choosing a distribution, but the reasonableness of the assumptions theoretically associated with the form of the distribution should also be considered. In theory, extreme-value distributions are particularly applicable to flow series …

Influence Of Unsaturated Hydraulic Properties On Infiltration From Circular Surface Areas, Abdolhossien Nassehzadeh-Tabrizi, Roland W. Jeppson

Reports

The effects and interactive effects on infiltration of parameters in the Brooks-Corey equation for defining the hydraulic properties of unsaturated soils are investigated by analyzing the results of numerical solutions of the unsaturated flow characteristics resulting from water applied on a circular surface area. The soil parameters are allowed to vary continuously as a function of depth. The parameters that have been allowed to vary separately and in pairs are: (1) The pore size distribution exponent, (2) Pb- The bubbling pressure, (3) Sr- The residual saturation, (4) n- The soil porosity and (5) Ko- The saturated hydraulic conductivity. The conclusions …

Analysis Of Hardened Concrete For Admixture Content, William Lee Dolch

JTRP Technical Reports

No abstract provided.

Use Of Synthetic Demand Modeling Techniques In Transportation Planning For Small Urban Areas In Indiana, Kumares C. Sinha, Hani S. Mahmassani, James Robert Mekemson, Edward Wilson Hanscom

JTRP Technical Reports

No abstract provided.

Traffic Speed Report No. 112 : Interim Report, Richard Philip Guenthner, George K. Stafford

JTRP Technical Reports

No abstract provided.

Traffic Speed Report No. 113 : Interim Report, Richard Philip Guenthner, George K. Stafford

JTRP Technical Reports

No abstract provided.