Engineering Commons^™

The Influence Of Local Buckling On The Structural Behavior Of Singly-Symmetric Cold-Formed Steel Columns, Gale P. Mulligan, Teoman Peköz

CCFSS Library (1939 - present)

INTRODUCTION Cold-formed steel sections are formed from thin steel sheets, of typical thickness 0.015-0.25 inches, by either production cold roll forming or by specialized press braking. As a result, it is possible to produce economically a variety of cross-sectional shapes, which have high strength-to-weight ratios. Some structural applications include primary and secondary load-carrying framing members, such as columns, purlins and wall studs; and shear diaphragms, such as floor and roof decks and wall panels (Yu [1973]). Their design is governed by the American Iron and Steel Institute (AISI) Specification [1980], which is unique because of its generality, e.g., no specific …

Hydraulic Analysis Of Surcharged Storm Sewer Systems, Don J. Wood, Gregory C. Heitzman

KWRRI Research Reports

Surcharge in a storm sewer system is the condition in which an entire sewer section is submerged and the pipe is flowing full under pressure. Flow in a surcharged storm sewer is essentially slowly varying unsteady pipe flow and methods for analyzing this type of flow are investigated. In this report the governing equations for unsteady fluid flow in pressurized storm sewers are presented. From these governing equations three numerical models are developed using various assumptions and simplifications. These flow models are applied to several example storm sewer systems under surcharge conditions. Plots of hydraulic grade and flow throughout the …

Plan Of Study For Cross Florida Barge Canal: Economic Analysis, United States. Army. Corps Of Engineers. Jacksonville District

Correspondence and Textual Material

At the time of the previous study of transportation savings, commerce in coal primarily for electric power generation could not be ·projected with any degree of accuracy because most electric utilities had not developed firm plans for building new coal-fired plants· or for converting from petroleum products or natural gas to coal at existing plants. Today, with plants already constructed that will burn coal, there is a greater probability of defining coal needs. So there is a need to reevaluate potential coal traffic via the CFBC. Also there is a need to evaluate the other types of benefits mentioned under …

Grand Prairie Water Supply Project - Phase 1, Richard C. Peralta, Roberto Arce, Timothy M. Skergan

Civil and Environmental Engineering Faculty Publications

On the Grand Prairie, rice has required irrigation. Present day economics are favoring irrigation for soybeans as well. Water needs are currently being filled primarily from three sources: rainfall, a Tertiary aquifer and a Quaternary aquifer. Rainfall and rainfall storage meet some of the total water needs. The Tertiary aquifer lies at depths of 750 to 1400 feet beneath the surface of the Grand Prairie. Some water is obtained from the formation, but the outlook for significantly increasing withdrawals is bleak because of the cost involved in drilling new wells. Roughly seventy-five percent of the irrigation water needs are met …

Evaluation And Accessing Of Data For A Water Resources Simulator, Richard C. Peralta, Roberto Arce, Timothy Skergan

Civil and Environmental Engineering Faculty Publications

This report evaluates the availability of data needed to use a groundwater simulation model for real time conjunctive water management in the Arkansas Grand Prairie. It is assumed that the goal of such management is to protect existing groundwater rights by maintaining water levels so that wells do not go dry, even in time of drought.

Sufficient hydrogeologic data exists to use the simulation model to predict the effect of known pumping rates on groundwater levels. Developing an optimal set of "target" levels and annually managing pumping to achieve those levels requires additional data: fall groundwater levels, degree of connection …

Design Of Oil Shale Disposal Embankment, Vincent P. Drnevich, Tommy C. Hopkins, Samuel S. Hale

Kentucky Transportation Center Research Report

Mining processes and associated regulations for oil shale development in eastern United States are discussed with emphasis given to overburden and spent shale disposal at the mining site. Curves are presented which allow for quick determination of stripping ratios, overburden quantities and oil shale quantities. Procedures are outlined for determining quantities of materials to be disposed and graphs are given for sizing various zones of the disposal embankment. These procedures are demonstrated with an example.

Stability of slopes and magnitude of settlement are functions of the engineering properties of the embankment materials. Procedures for obtaining these data are from field …

Engineering Properties Of Two Spent Shales And Minus 1/4-Inch Raw Shale For The Means Project, Vincent P. Drnevich, David L. Allen, Tommy C. Hopkins

Kentucky Transportation Center Research Report

A geotechnical investigation was performed to determine the physical properties (classification) and engineering properties of the Sunbury oil shale from a proposed oil shale mining site in Montgomery County (Means Project). Three materials were recieved in sealed metal drums and were labeled Raw Oil Shale (only material less than 0.25 inch), Sunbury, spent shale, and Sunbury shale (2.5-inch to 1/4-inch). The material labeled Sunbury, spent shale, (hereafter referred to as Spent Shale No. 1), has very little fines and the particles were angular in shape. The Sunbury, spent shale, 2.5-inch to 0.25 inch, (hereafter referred to as Spent Shale No. …

Traffic Safety Analysis: University Of Kentucky Area, Kentucky Transportation Research Program

Kentucky Transportation Center Research Report

The concept of Transportation System Management (TSM) is based on the use of transportation facilities for the efficient and safe movement of people and goods. Through a grant administered by the U.S. Department of Transportation, the Lexington-Fayette Urban County Government contracted with the University of Kentucky (UK) to develop and implement a "Ridesharing Program" and a "Minor Traffic Control Improvements Program".

Discussions of the traffic safety problems around the University area by the Lexington-Fayette Urban County Council coincided with UK's initial work in the traffic safety portion of the grant. Following those discussions, a request was made by the Council …

A Computerized Analysis Of Flexible Pavement Rutting Behavior (Pavrut), David L. Allen

Kentucky Transportation Center Research Report

Flexible pavements are known to fail in several modes, one of which is rutting. In an effort to determine where in the pavement structure and to what extent rutting occurs and to determine the factors that control rutting, a comprehensive laboratory testing program was performed. Various traffic and environmental parameters were controlled in the study; and from the data, mathematical models that describe the rutting characteristics of an asphalt concrete, a dense graded aggregate, and a subgrade soil were formulated. Details of the materials, equipment, and laboratory procedures were reported by Allen in a previous report. Also, the mathematical models …

Analysis Of Lost Times At Signalized Intersections, Kenneth R. Agent, Joseph D. Crabtree

Kentucky Transportation Center Research Report

When determining the capacity of a signalized intersection, knowledge of certain traffic parameters is necessary. The previous investigation conducted under this study dealt with an analysis of saturation flow values. The objective of this investigation was to determine appropriate values to use for lost times at signalized intersections. The lost times at the beginning and ending of the phases were analyzed, as well as lost times during the phase due to the interference of pedestrians, local buses, and opposing traffic for left turns. Factors affecting those lost time values were identified. The lost time values, along with the previously identified …

Development Of A Thickness Design System For Portland Cement Concrete Pavements, Herbert F. Southgate, James H. Havens, Robert C. Deen, Donald C. Newberry Jr.

Kentucky Transportation Center Research Report

This report covers the merger of criteria used in the Portland Cement Association's and MSHTO's pavement thickness design systems. The combined criteria is coupled with the principle of equal work as defined in classical physics to produce thickness design curves for portland cement concrete pavements. The thickness of portland cement concrete varied by approximately 0.15 inches for the same CBR and design EAL when the thickness of crushed-stone base varied from 3 to 6 inches. Therefore, the design thickness of the portland cement concrete is relatively insensitive to changes in thickness of the crushed stone base.

Revenue Calculations Pertaining To A Change In County Local-Option Highway-User Taxes Proposed By The Indiana Association Of County Commissioners, Association Of Indiana Counties, And Indiana Association Of Cities And Towns, Herpicc

Indiana Local Technical Assistance Program (LTAP) Publications

The projected revenue values contained in this report are the product of computer programs developed by staff members of the Highway and Extension Research Project for Indiana Counties and Cities (HERPICC). In its role as provider of technical information to the state's counties and municipalities, HERPICC produced this report in response to a request from the three associations who, as representatives of local governments, proposed the changes analyzed herein. Given its status as a state agency, HERPICC'S production of this report is not intended to represent, nor should it be interpreted as, either an endorsement or a criticism of the …

Single-Reflection Film—Substrate Half-Wave Retarders With Nearly Stationary Reflection Properties Over A Wide Range Of Incidence Angles, R. M.A. Azzam, M. Emdadur Rahman Khan

Electrical Engineering Faculty Publications

The complex reflection coefficient for the p polarization of a transparent film on an absorbing or transparent substrate can be made equal to the negative of that for the s polarization, and hence the film—substrate system acts as a half-wave retarder (HWR), by proper selection of film refractive index N₁, film thickness d, and angle of incidence Φ. This condition, which generally holds only at normal incidence, becomes possible at oblique incidence also if N₁ is within a certain range, 1 < N₁ < N̂₁ . For a given substrate and given N₁, …

Complex Reflection Coefficients For The Parallel And Perpendicular Polarizations Of A Film-Substrate System, R. M.A. Azzam, M. Emdadur Rahman Khan

Electrical Engineering Faculty Publications

The complex reflection coefficients R_v(ø,ζ) of a film-substrate system for the parallel (v = p) and perpendicular (v = s) polarizations are examined in detail as functions of the angle of incidence ø(0 ≤ ø ≤ 90°) and the reduced normalized film thickness ζ(0 ≤ ζ < 1). For definiteness, the reflection of light of wavelength λ = 0.6328 µm by the air–SiO₂–Si system is assumed. Families of circles that represent the constant-angle-of-incidence contours, their envelopes, and the associated constant-thickness contours ofR_p and R_s are all presented in the complex plane. Furthermore, the amplitude-reflectance and phase-shift functions, |R_v|(ø,ζ) and argR_v(ø,ζ) …

Crop Harvester Including A Quickly Adjustable Semi-Floating, Self-Steering Cutter Head, Larry D. Swetnam, James H. Casada, Linus R. Walton

Biosystems and Agricultural Engineering Faculty Patents

The present invention is directed to an easily adjustable, semi-floating, self-steering cutter head for row crops. The present invention incorporates self-steering capabilities, a cut-off mechanism and a quick-adjustment into a single integral unit. Direction sensing is accomplished by utilizing a feeler arm or a set of feeler arms which follow the plant stock row or other protrusions or indentations. Forces detected by the guidance sensors are transmitted to a ring which is a part of the housing and/or shielding of the cut-off device. The steering forces may be transmitted to a steering system through a single connection. The present invention …

Bevolute Gear System, Willis M. Carter

Mechanical Engineering Faculty Patents

The present invention relates to a bevolute gearing system which transmits torque between non-intersecting shafts at right angles to each other. The bevolute gear system includes a pinion gear which is flat and in one plane. The pinion gear is designed to include teeth which are shaped in the form of an involute spiral. The bevolute gear system includes a second gear which is also designed to include teeth which are shaped in the form of an involute spiral. The second gear is mounted on a non-intersecting axis at a right angle to the axis of the pinion gear. The …

Cold-Formed Steel Design Manual, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Design Of Automotive Structural Components Using High Strength Sheet Steels, Wei-Wen Yu, Chiravut Santaputra, M. Brad Parks

CCFSS Library (1939 - present)

INTRODUCTION In recent years, automobile manufacturers have introduced new lines of lighter vehicles for the purpose of achieving fuel economy. To construct such vehicles, formable and weldable, high strength, sheet steels with yield points ranging up to 140 ksi have been used for parts and structural components. 1.1-1.7 Because various types of newer high strength sheet steels are now available for engineers to reduce car weight and because these steels permit the use of existing production equipment with virtually no change in techniques or production rates, the design criteria for efficient and economical use of these high strength steels in …

Repetitive Load Deformation Of Cohesionless Soil, Rodney Lentz

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Thermal Gasification Of Densified Sewage Sludge And Solid Waste, Samuel A. Vigil, George Tchobanoglous

Civil and Environmental Engineering

Disposing of sewage sludge in an economical and environmentally acceptable manner is a problem for all communities that have wastewater treatment plants , Similarly , many communities are having to dispose of increasing quantities of solid waste. These problems could be solved by co-disposal of sludge and solid waste in a common facility. This study, a condensation of the original report, presents results of an experimental program on the feasibility of gasifying densified sludge and source-separated solid waste.

Test 1468: White Farm Equipment 2-110 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Us Army Missile Command Regulation 10-1, Chapter 29, Missile Intelligence Agency, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

The Army Missile Command was the successor to the Army Ballistic Missile Agency at Redstone Arsenal in Huntsville, AL. The Army Ballistic Missile Agency was an organization that developed missiles for the Army and launched the first United States satellite, Explorer 1, on 31 January 1958. It was staffed, in part with Wernher von Braun and his team of scientists and engineers from Germany.

Missile Intelligence Agency was a special-purpose intelligence production organization concerned with missiles and related technology used or being developed by foreign armed forces.

In the Army system, a regulation numbered 10-1 often describes the organization and …

An Improved Rotary Singulator, Burford J. Furman, J. M. Henderson

Faculty Publications, Mechanical Engineering

A new operating approach for a previously existing rotary singulator was developed which improves the versatility of the device. This was accomplished by the implementation of a modular mechanism that performed the basic functions of agitation, gating, pocket formation, and exit, all inherent in this type of singulation device.

Doctor Of Arts In Information Science A Field-Based Program For Librarians And Information Managers, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

The Effects Of Limited Food Availability On The Striped Bass Fishery In Lake Mead, John R. Baker, Larry J. Paulson

Publications (WR)

The original range of striped bass (Morone saxatilis) was along the Atlantic Coast. They were introduced into the lower Sacramento River in 1879 and are now also found along the Pacific Coast. A landlocked striped bass fishery was established in Santee-Cooper Reservoir, South Carolina, in 1954, and they have since been introduced into numerous other reservoirs, including Lake Havasu, Lake Mead and Lake Powell on the Colorado River. Striped bass were introduced into Lake Mead in 1969 in response to declines in the largemouth bass (Micropterus salmoides) fishery that occurred during the 1960s and in order to further utilize the …

Limiting Swine Stress With Evaporative Cooling In The Southeast, Robert L. Fehr, K. T. Priddy, Samuel G. Mcneill, Douglas G. Overhults

Biosystems and Agricultural Engineering Faculty Publications

Three-hourly weather data for 7 locations in the Southeast and Central United States were used to evaluate the feasibility of evaporative cooling for reducing swine stress. Stress was defined as a relationship between dry and wet bulb temperatures which exceeded a stress index of 85. This analysis indicates that properly installed evaporative coolers could reduce the number of hours that stress would occur in swine facilities from 89.6 to 96.4% depending on location.

A Dairy Cow Housing System Featuring Motel Free Stalls, Robert L. Fehr, William L. Crist

Agricultural Engineering Extension Updates

The term motel free stalls describes a milking cow housing system that utilizes roof area which protects only the free stalls. Alleys are only partially protected by the roof overhang. This system provides little protection from extreme temperatures but can provide some summer protection if properly constructed. Motel free stall systems reduce the initial cost of constructing lactating cow housing. Motel free stall system described in this paper should be used with caution in climatic regions colder than Kentucky because of limited protection from extreme cold temperatures. This paper describes the application of motel free stall housing systems and a …

File Editing On The Hp3000 For The Sedimot Ii Computer Model, David S. Logsdon, Richard C. Warner

Agricultural Engineering Extension Updates

Since the release of the SEDIMOT II model, the Agricultural Engineering Department has taught approximately 300 consulting and mining engineers, reclamation specialists, government agency personnel, and academia. The program is being used on all types of computer systems, company owned as well as time sharing vendors. Over 50 firms are using the HP3000 system of the College of Agriculture at the University of Kentucky under arrangements with the Institute for Mining and Minerals Research, Office of Informational Services and Technical Liaison.

Some Recommended Tobacco Barn Construction Features, George A. Duncan

Agricultural Engineering Extension Updates

Following are several recommendations concerning tobacco barn construction or remodeling. These recommendations are included in newly revised blueprints available through the Agricultural Engineering Plan Service (see separate plans list).

Energy Storage Capacity Of Reversible Liquid‐Phase Diels Alder Reaction Between Maleic Anhydride And 2‐Methyl Furan, B. G. Sparks, Bruce E. Poling

Chemical and Biochemical Engineering Faculty Research & Creative Works

Calorimetry was used to determine the heat of reaction and equilibrium constant at 318 K for the reaction between maleic anhydride (A) and 2‐methyl furan (B). The values were −60 kJ/gmol and 614 cm3/gmol, respectively. The motivation for this work was to find a single phase‐reacting system that could be used to store solar energy. Thus, the energy storage capacity was calculated for a mixture of A and B, both initially at 7 kmol/m3, in dioxane. The maximum apparent heat capacity of 7.37 J/cm3·K occurred at 334 K. This maximum value is 76% higher than the heat capacity of pure …