Engineering Commons^™

Sorption Of Binary Mixtures Of Aromatic Nitrogen Heterocyclic Compounds On Subsurface Materials, John M. Zachara, Calvin C. Ainsworth, Christina E. Cowan, Berta L. Thomas

United States Department of Energy: Publications

Single and binary solute sorption of pyridine, quinoline, and acridine has been investigated on two low organic carbon subsurface materials with similar properties but different equilibrium pH when saturated with water. Single solute sorption for all compounds is higher in the acidic soil as compared to the basic soil, reflecting stronger sorption of the protonated organic cations. The protonated species exhibit high selectivity for the exchange complex at low aqueous concentration with selectivity increasing with ring number. Binary sorption experiments with quinoline/pyridine and quinoline/acridine demonstrate that competitive sorption occurs between compounds in the acidic subsoil where the protonated compound species …

Applications Of The Semiclassical Spectral Method To Nuclear, Atomic, Molecular, And Polymeric Dynamics, M. L. Koszykowski, G. A. Pfeffer, D. W. Noid

United States Department of Energy: Publications

Nonlinear dynamics plays a dominant role in a variety of important problems in chemical physics. Examples are unimolecular reactions, infrared multiphoton decomposition of molecules, the pumping process of the gamma ray laser, dissociation of vibrationally excited state-selected van der Waals’s complexes, and many other chemical and atomic processes. The present article discusses recent theoretical studies on the quasi-periodic and chaotic dynamical aspects of vibrational-rotational states of atomic, nuclear, and molecular systems using the semiclassical spectral method (SSM). We note that the coordinates, momenta, and so on, are found using classical mechanics in the studies included in this review. Consequently, certain …

Bioconcentration Of Heavy Metals (Cu, Cr, Pb, And Zn) In The Missouri River Near Sioux City, Iowa, Robert Conklin, Suzie Galles, Edward Shane, Rod Tondreau

United States Army Corps of Engineers, Omaha District

The concentrations of the heavy metals- copper, chromium, lead, zinc- in the biota of the Missouri River were measured at a control site upstream of Sioux City and at a site downstream of the city. Bioconcentration factors for each of the metals were calculated for fish, periphyton, and invertebrates, and the concentrations of metals in the river sediments were measured.

Concentrations of the same metals were measured in the sediment, water, periphyton, invertebrates, zooplankton, and fish of Snyder's Bend Lake. Bioconcentration factors were calculated for each of the biological communities and were found to be very similar to those found …

Characteristic Surfaces For Three-Position Motion Generation With Planar Four-Bar Mechanisms, Clark R. Barker, J. Baumann

Mining Engineering Faculty Research & Creative Works

This paper considers the relationship between the three-position motion generation problem and the solution space for planar four-bar mechanisms. After one half of the basic four bar had been selected, two infinities of solutions still remained. These solutions are mapped in a plane to determine where the particular types of mechanisms occur. A contour is then generated in the mapping plane which joins together all solutions which share a common characteristic in regard to their link lengths. This same contour can be displayed in the solution space and in the Cartesian plane in which the motion generation is defined. Significant …

Characteristic Surfaces For Three-Position Motion Generation With Planar Four-Bar Mechanisms., Clark R. Barker, J. Baumann

Mining Engineering Faculty Research & Creative Works

This paper considers the relationship between the three-position motion generation problem and the solution space for planar four-bar mechanisms. After one half of the basic four bar had been selected, two infinities of solutions still remained. These solutions are mapped in a plane to determine where the particular types of mechanisms occur. A contour is then generated in the mapping plane which joins together all solutions which share a common characteristic in regard to their link lengths. This same contour can be displayed in the solution space and in the Cartesian plane in which the motion generation is defined.

Automated Acoustic Intensity Measurements And The Effect Of Gear Tooth Profile On Noise, William J. Atherton, Adam Pintz, David G. Lewicki

Mechanical Engineering Faculty Publications

Acoustic intensity measurements were made at NASA Lewis Research Center on a spur gear test apparatus. The measurements were obtained with the Robotic Acoustic Intensity Measurement System developed by Cleveland State University. This system provided dense spatial positioning, and was calibrated against a high quality acoustic intensity system. The measured gear noise compared gearsets having two different tooth profiles. The tests evaluated the sound field of the different gears for two speeds and three loads. The experimental results showed that gear tooth profile had a major effect on measured noise. Load and speed were found to have an effect on …

Issues In The Design And Implementation Of Expert Systems, Clive L. Dym

All HMC Faculty Publications and Research

This article discusses the issues that arise in the design and implementation of expert systems. These issues include: task selection; the stages of development of expert system projects; knowledge acquisition; languages and tools; development and run-time environments; and organizational and institutional issues. The article closes with some speculation about the future development of expert systems.

Acuta Enews January 1987, Vol. 16, No. 1

ACUTA Newsletters

In This Issue

Potpourri

Party Line

You, Too, Can Avoid Those Frightening Pitfalls during implementation of a New Phone System

Mule Helps Maintain Phone Line In Canyon

Leihigh constructs voice/data net

Development Deal Brings AT&E's Wristwatch Pager Closer

Letter to the Editor

Conservation Tillage: Perceived And Actual Use, Elbert C. Dickey, Paul J. Jasa, Bryn J. Dolesh, Lisa A. Brown, S. Kay Rockwell

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A mail survey of farmers in Nebraska showed their perceived use of conservation tillage was about 55%. However, using the 30% residue cover criterion that the Conservation Tillage Information Center uses to define conservation tillage, a field survey of seven counties in 1984 showed that actual use of conservation tillage was less than 5%. Fewer than 20% of the producers surveyed had more than 20% residue cover remaining after tillage and planting. The field survey also showed disk tillage systems were used by almost 70% of the producers. The moldboard plow was used by only 15% of the producers, thus …

Instructions To Connect An Agtext Telecaption Ii Decoder To Your Tv In Rural Areas, Tom Priddy

Agricultural Engineering Extension Updates

• Follow all safety instructions as provided in your Telecaption II Decoder manual.
• Plug your Telecaption II Decoder into regular 110-115V house current outlet.
• Plug your TV power cord into the rear of your Telecaption II Decoder.
• Turn your TV on (from this point your Telecaption II Decoder turns your TV off/on). Now press the Decoder ''power on'' button.
• Look at the rear panel of your Telecaptlon II Decoder. Connect your outside antenna (or cable coaxial if you're on cable TV) to the rear of your Telecaption II Decoder connection labeled "from ant or cable''. If you are using TV ribbon, …

Trickle Irrigation Installation For Horticulture Crops, Richard C. Warner, Jim Baier

Agricultural Engineering Extension Updates

Course Outline

1. Trickle Irrigation Overview
2. Design Planning
3. Water Supply
4. Basic Trickle Irrigation System
5. Design Drawing
6. Installation
7. Emitter Clogging Problems
8. Irrigation Scheduling

Grain Drying & Storage - Quick Reference Chart, Doug G. Overhults, Sam Mcneill

Agricultural Engineering Extension Updates

No abstract provided.

Characteristic Surfaces For Three Position Function Generation With Planar Four Bar Mechanisms, Clark R. Barker, P. L. Tso

Mining Engineering Faculty Research & Creative Works

This paper considers the relationship between the three-position function generation problem and the solution space for planar four bar mechanisms. The two infinities of solutions possible are mapped in a plane to determine the locations where particular types of mechanisms occur. It is possible to generate a contour in the mapping plane which joins together all solutions which possess a common characteristic in regard to their link lengths. This same contour can be displayed in the solution space to ascertain the overall characteristics of potential solutions to the design problem. A numerical example is used for illustrative purposes, but the …

Letters To The Editor, Partho Neogi

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

Measurement Of The Condensation Coefficient Of Water In The Umr Simulation Chamber, Daniel R. White, James L. Kassner, John C. Carstens, Donald E. Hagen, John L. Schmitt, Darryl J. Alofs, Alfred R. Hopkins, Max B. Trueblood, Max W. Alcorn, William L. Walker

Physics Faculty Research & Creative Works

The UMR Cloud Simulation Facility is described. The facility is designed to provide a controlled environment simulating the conditions of natural atmospheric processes. It consists of two cooled-wall expansion cloud chambers and peripheral instrumentation for generation and characterization of aerosols used for cloud formation studies. Results of initial studies of the growth of warm cloud droplets and inferred measurements of the condensation coefficient are described.

Microstructural Inhomogeneity In Sintered Pb(Mg1/3nb2/3)O3‐Pbtio3 Based Dielectrics, Jyoti P. Guha, Harlan U. Anderson

Materials Science and Engineering Faculty Research & Creative Works

The sintering behavior and microstructural development of dielectric ceramics based on Pb(Mg_1/3Nb_2/3)O₃‐PbTiO₃ solid solutions are greatly affected by the formation of a liquid phase at ∼ 1290°C. Prolonged sintering at and above this temperature gives rise to an excessive PbO loss and the resultant variation in composition leads to an inhomogeneous microstructure. The inhomogeneity is characterized by the formation of a dense, localized region containing a PbO‐rich liquid near the surface with a porous interior region in the bulk of the sample. Copyright © 1987, Wiley Blackwell. All rights reserved

Modelling Earthquake Ground Motions In Seismically Active Regions Using Parametric Time Series Methods, G. W. Ellis, A. S. Çakmak, J. Ledolter

Engineering: Faculty Publications

Strong motion accelerograms can be efficiently modelled using time series analysis. Because of the nonstationarity of accelerograms, transformations must first be applied to stabilize the variance and frequency content. An ARMA model can then be fit to the stabilized series. By analyzing a large number of accelerograms in California, these ARMA and transform parameters have been related to physical variables. Thus it is possible to generate simulated ground motions in the area studied. The validity of the modelling process is measured by comparing the simulations and their frequency spectra to actual records.

Bridge Decks And Overlays, James H. Havens, Theodore Hopwood Ii, Edgar E. Courtney

Kentucky Transportation Center Research Report

The report presents a historical perspective of the Transportation Cabinet's bridge deck construction and maintenance efforts directed toward increasing bridge deck durability.

Bridge decks crack in specific patterns that primarily depend upon bridge designs. Normal deck cracking is due to load-induced and thermal effects. Each type of cracking has a distinct pattern.

One-hundred and nineteen experimental bridge deck overlays were inspected. Included were 9 membrane bridges, 87 latex concrete overlays and 23 low-slump overlays. The overlays had been placed originally on both new and existing bridge decks on various routes throughout the state. Most of the overlays were rated in …

Thermomechanical Design Criteria For Zr02-Y203 Coated Surfaces, J. Padovan, Benjamin T.F. Chung, Glen E. Mcdonald, Robert C. Hendricks

Mechanical Engineering Faculty Research

Thermocycling of ceramic-coated turbomachine components produces high thermomechanical stresses that are mitigated by plasticity and creep but aggravated by oxidation, with residual stresses exacerbated by all three. These residual stresses, coupled with the thermocyclic loading, lead to high compressive stresses that cause the coating to spall. In the paper a ceramic-coated gas path seal is modeled with consideration given to creep, plasticity, and oxidation. The resulting stresses and possible failure modes are discussed.

Automated Data Acquisition For Low-Volume Road Inventory And Management, Theodore Hopwood Ii, Gary W. Sharpe, John W. Hutchinson, Robert C. Deen

Kentucky Transportation Center Research Report

Local governments need suitable inventories and condition surveys to accurately determine and prioritize their funding needs. An efficient method of performing an inventory of the roads and subsequently determining the condition of major system components is to use an automated data-acquisition system to measure and record essential data. The data may be collected and processed by a central inventory management group. The inventory should include pavement characteristics, roadway geometries, and roadside features. Pavement condition may include structural integrity, road roughness, and skid resistance. Roadway geometries include horizontal curvature, length, width, superelevation, and grade. Roadside features include signing, intersections, guardrails, and …

Evaluation Of 1985 Aashto Flexible Pavement Design Equations And Nomographs, Herbert F. Southgate, Gary W. Sharpe, Robert C. Deen

Kentucky Transportation Center Research Report

The 1985 AASHTO nomograph and equations for flexible pavements were reviewed and analyzed to determine requirements for input data, sensitivity of designs based on the additional variables for percent reliability, standard deviation, and resilient modulus of subgrade material. Design thicknesses using the 1985 AASHTO Guide were compared to thicknesses using the 1981 Kentucky thickness design method for flexible pavements.

Nebraska Summary: S094 S.A.M.E Antares 110vdt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S011-S012 Massey Ferguson 3070, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Chromate Adsorption On Amorphous Iron Oxyhydroxide In The Presence Of Major Groundwater Ions, John M. Zachara, Donald Girvln, Ronald Schmidt, C. Thomas Resch

United States Department of Energy: Publications

Chromate adsorption on amorphous iron oxyhydroxide was investigated in dilute iron suspensions as a single solute and in solutions of increasing complexity containing CO₂ (g), SO₄^2-(aq), H₄Si0₄(aq), and cations [K⁺, Mg²⁺, Ca²⁺(aq)]. In paired-solute systems (e.g., CrO₄^2- =H₂CO₃*), anionic cosolutes markedly reduce CrO₄^2- adsorption through a combination of competitive and electrostatic effects, but cations exert no appreciable influence. Additionally, H4Si04 exhibits a strong time-dependent effect: CrO₄^2- adsorption is greatly decreased with increasing H₄SiO_{4 …}

Master Of Science In Computer-Based Learning 1987-89 Catalog, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Master Of Science In Computer-Based Learning Catalog, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Master Of Science In Computer-Based Learning Catalog, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Center For Computer-Based Learning Doctor Of Arts In Information Systems, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Memorandum Re: Microcomputer Applications In Education Program, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Computer-Based Graduate Programs In Computer Education 1987-88 Catalog, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.