Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Series

Discipline
Institution
Keyword
Publication Year
Publication
File Type

Articles 68371 - 68400 of 75074

Full-Text Articles in Engineering

Engineering Soils Map Of Adams County, Indiana, Arvind Chaturvedi Jan 1989

Engineering Soils Map Of Adams County, Indiana, Arvind Chaturvedi

JTRP Technical Reports

No abstract provided.

Go to article

Test 1631: John Deere 8760 Powershift Diesel 12-Speed, Nebraska Tractor Test Lab Jan 1989

Test 1631: John Deere 8760 Powershift Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Go to article

Test 1634: Deutz-Allis 9170 Diesel 18-Speed, Nebraska Tractor Test Lab Jan 1989

Test 1634: Deutz-Allis 9170 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Go to article

Test 1635: Deutz-Allis 9190 Diesel 18-Speed, Nebraska Tractor Test Lab Jan 1989

Test 1635: Deutz-Allis 9190 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Go to article

Nebraska Summary: S075 Case-Ih 5120, Nebraska Tractor Test Lab Jan 1989

Nebraska Summary: S075 Case-Ih 5120, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Go to article

Nebraska Summary: S072 Massey Ferguson 3680, Nebraska Tractor Test Lab Jan 1989

Nebraska Summary: S072 Massey Ferguson 3680, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Go to article

Nebraska Summary: S071 Massey Ferguson 253, Nebraska Tractor Test Lab Jan 1989

Nebraska Summary: S071 Massey Ferguson 253, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Go to article

The Development Of Optimal Strategies For Maintenance, Rehabilitation, And Replacement Of Highway Bridges: Volume 2 - A System For Bridge Structural Condition Assessment, Ah Beng Tee, Mark D. Bowman, Kumares C. Sinha Jan 1989

The Development Of Optimal Strategies For Maintenance, Rehabilitation, And Replacement Of Highway Bridges: Volume 2 - A System For Bridge Structural Condition Assessment, Ah Beng Tee, Mark D. Bowman, Kumares C. Sinha

JTRP Technical Reports

No abstract provided.

Go to article

The Development Of Optimal Strategies For Maintenance, Rehabilitation, And Replacement Of Highway Bridges: Volume 4 - Cost Analysis : Executive Summary And Final Report, Mitsuru Saito, Kumares C. Sinha Jan 1989

The Development Of Optimal Strategies For Maintenance, Rehabilitation, And Replacement Of Highway Bridges: Volume 4 - Cost Analysis : Executive Summary And Final Report, Mitsuru Saito, Kumares C. Sinha

JTRP Technical Reports

No abstract provided.

Go to article

Gaas Photoconductive Closing Switches With High Dark Resistance And Microsecond Conductivity Decay, M. S. Mazzola, K. H. Schoenbach, V. K. Lakdawala, R. Germer, G. M. Loubriel, F. J. Zutavern Jan 1989

Gaas Photoconductive Closing Switches With High Dark Resistance And Microsecond Conductivity Decay, M. S. Mazzola, K. H. Schoenbach, V. K. Lakdawala, R. Germer, G. M. Loubriel, F. J. Zutavern

Electrical & Computer Engineering Faculty Publications

Silicon-doped n-type gallium arsenide crystals, compensated with diffused copper, were studied with respect to their application as photoconductive, high-power closing switches. The attractive features of GaAs:Cu switches are their high dark resistivity, their efficient activation with Nd:YAG laser radiation, and their microsecond conductivity decay time constant. In the authors' experiment, electric fields are high as 19 kV/cm were switched, and current densities of up to 10 kA/cm2 were conducted through a closely compensated crystal. At field strengths greater than approximately 10 kV/cm, a voltage `lock-on' effect was observed.

Go to article

Surface Cover Provided By Selected Legumes, John E. Gilley, J. F. Power, P. J. Reznicek, S. C. Finkner Jan 1989

Surface Cover Provided By Selected Legumes, John E. Gilley, J. F. Power, P. J. Reznicek, S. C. Finkner

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The use of legumes in conservation tillage systems may yield several benefits including reduced erosion resulting from establishment of surface cover. The effectiveness in furnishing surface cover of 18 plant species seeded on three different dates was evaluated over an 11-month period. For several of the legume species, planting date significantly influenced maximum surface cover and the number of days required to reach maximum cover. For each of the planting dates, hairy vetch achieved maximum cover as rapidly as any other legume and maintained the greatest cover throughout the study period. Relationships for estimating legume surface cover from vegetative mass …

Go to article

Germ Weight, Germ Oil Content, And Estimated Oil Yield For Wet-Milled Yellow Dent Corn As Affected By Moisture Content At Harvest And Temperature Of Drying Air, Curtis L. Weller, Marvin R. Paulsen, Stephen Mbuvi Jan 1989

Germ Weight, Germ Oil Content, And Estimated Oil Yield For Wet-Milled Yellow Dent Corn As Affected By Moisture Content At Harvest And Temperature Of Drying Air, Curtis L. Weller, Marvin R. Paulsen, Stephen Mbuvi

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A split-plot experimental design was used to determine the effect of moisture content at harvest and temperature of drying air on weight, oil content, and estimated oil yield of corn germs recovered from laboratory wet milling. The effects were determined for a high-yielding hybrid of yellow dent corn widely grown in the corn belt that was hand-picked and hand-shelled. Germ oil content decreased significantly as moisture content at harvest and temperature of drying air increased. Germ weight and estimated oil yield generally decreased as both moisture content at harvest and temperature of drying air increased from 17.2 to 29.6% and …

Go to article

Determining Crop Residue Cover With Electronic Image Analysis, Elbert C. Dickey, David P. Shelton, G.E. Meyer, K.T. Fairbanks Jan 1989

Determining Crop Residue Cover With Electronic Image Analysis, Elbert C. Dickey, David P. Shelton, G.E. Meyer, K.T. Fairbanks

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Crop residue management is one of the best and most efficient soil conservation methods available to farmers. Determinations of the percentage of the soil surface covered with crop residue are often needed for: soil conservation research; erosion control demonstrations; and maintaining compliance with federal, state, or local soil conservation regulations. A number of methods can be used to estimate residue cover, however, many have limitations. To help overcome some of these limitations, a technique, which uses readily-available microcomputer-related hardware and standard video camera equipment has been developed to estimate crop residue cover from photographic slides. This procedure is relatively rapid, …

Go to article

Enhancing The Adoption Of Soil Conservation Practices With Targeted Educational Programs, David P. Shelton, Elbert C. Dickey, Paul J. Jasa, David A. Biere Jan 1989

Enhancing The Adoption Of Soil Conservation Practices With Targeted Educational Programs, David P. Shelton, Elbert C. Dickey, Paul J. Jasa, David A. Biere

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Two independent, but closely related, grant funded educational programs have been developed and implemented to reduce soil erosion in selected areas of eastern Nebraska, U.S.A. Traditional extension programming methods as well as other more nontraditional approaches have been extensively used. In one program, encompassing 220,000 ha of cropland, annual soil erosion has been reduced by 2.5 Mt and annual fuel savings of 1.5 ML have been achieved through a reduction in the number of tillage operations. During a one-year period in the second project, more than 81,000 m of terraces were constructed, which resulted in an annual soil erosion reduction …

Go to article

Oxygen Reduction In A Proton Exchange Membrane Test Cell, S. J. Ridge, Ralph E. White, Y. Tsou, R. N. Beaver, G. A. Eisman Jan 1989

Oxygen Reduction In A Proton Exchange Membrane Test Cell, S. J. Ridge, Ralph E. White, Y. Tsou, R. N. Beaver, G. A. Eisman

Faculty Publications

Oxygen reduction in a gas-fed porous electrode attached to a proton exchange membrane is discussed. Experimental data and a mathematical model are presented for the test cell used. Various membrane and electrode assemblies were tested at different levels of platinum loading and Teflon® content. The model accounts for the diffusion and reaction of oxygen and the diffusion and reaction of hydrogen ions. Sulfuric acid was placed above the membrane in the test cell reservoir to provide a source of protons for the reduction of oxygen at the cathode. Based upon model predictions, it is shown that the transport of the …

Go to article

An Algebraic Model For A Zinc/Bromine Flow Cell, G. D. Simpson, Ralph E. White Jan 1989

An Algebraic Model For A Zinc/Bromine Flow Cell, G. D. Simpson, Ralph E. White

Faculty Publications

An algebraic model for a parallel plate, zinc/bromine flow cell is presented and used to predict various performance quantities, which are compared to those predicted by using previously published differential equation models. The results presented compare well with previous work. The model is based on the concept of using well-mixed zones and linear concentration and potential profiles for the diffusion layers and the separator. The Butler-Volmer equation is used for the electrochemical reactions, and the homogeneous reaction between bromine and bromide is included.

Go to article

A Comparison Of Newman's Numerical Technique And Deboor's Algorithm, D. A. Curtis, T. I. Evans, Ralph E. White Jan 1989

A Comparison Of Newman's Numerical Technique And Deboor's Algorithm, D. A. Curtis, T. I. Evans, Ralph E. White

Faculty Publications

No abstract provided.

Go to article

Estimation Of Electrode Kinetic Parameters Of The Lithium/Thionyl Chloride Cell Using A Mathematical Model, T. I. Evans, Ralph E. White Jan 1989

Estimation Of Electrode Kinetic Parameters Of The Lithium/Thionyl Chloride Cell Using A Mathematical Model, T. I. Evans, Ralph E. White

Faculty Publications

A one-dimensional mathematical model for the lithium/thionyl chloride primary cell is used in conjunction with a parameter estimation technique, in order to estimate the electrode kinetic parameters of this electrochemical system. The electrode kinetic parameters include the anodic transfer coefficient and exchange current density of the lithium oxidation, a,1 and i0,1,ref; the cathodic transfer coefficient and the effective exchange current density of the thionyl chloride reduction, c,4 and a0i0,4,ref, and a morphology parameter, . The parameter estimation is performed on simulated data first in order to gain confidence in the method. Data reported in …

Go to article

A Mathematical Model Of A Lithium/Thionyl Chloride Primary Cell, T. I. Evans, T. V. Nguyen, Ralph E. White Jan 1989

A Mathematical Model Of A Lithium/Thionyl Chloride Primary Cell, T. I. Evans, T. V. Nguyen, Ralph E. White

Faculty Publications

A one-dimensional mathematical model for the lithium/thionyl chloride primary cell has been developed to investigate methods of improving its performance and safety. The model includes many of the components of a typical lithium/thionyl chloride cell such as the porous lithium chloride film which forms on the lithium anode surface. The governing equations are formulated from fundamental conservation laws using porous electrode theory and concentrated solution theory. The model is used to predict one-dimensional, time dependent profiles of concentration, porosity, current, and potentialas well as cell temperature and voltage. When a certain discharge rate is required, the model can be used …

Go to article

A Thermal Analysis Of A Spirally Wound Battery Using A Simple Mathematical Model, T. I. Evans, Ralph E. White Jan 1989

A Thermal Analysis Of A Spirally Wound Battery Using A Simple Mathematical Model, T. I. Evans, Ralph E. White

Faculty Publications

A two-dimensional thermal model for spirally wound batteries has been developed. The governing equation of the model is the energy balance. Convective and insulated boundary conditions are used, and the equations are solved using a finite element code called TOPAZ2D. The finite element mesh is generated using a preprocessor to TOPAZ2D called MAZE. The model is used to estimate temperature profiles within a spirally wound D-size cell. The model is applied to the lithium/thionyl chloride cell because of the thermal management problems that this cell exhibits. Simplified one-dimensional models are presented that can be used to predict best and worst …

Go to article

Measured Spectra Of The Hygroscopic Fraction Of Atmospheric Aerosol Particles, Darryl J. Alofs, Donald E. Hagen, Max B. Trueblood Jan 1989

Measured Spectra Of The Hygroscopic Fraction Of Atmospheric Aerosol Particles, Darryl J. Alofs, Donald E. Hagen, Max B. Trueblood

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Relation between Dry Diameter (Xo) and Critical Supersaturation (Sc) for Atmospheric Submicron Aerosol Particles is Investigated. the Particles Are Passed through an Electrostatic Aerosol Size Classifier, and Then through an Isothermal Haze Chamber. Results Are Reported in Terms of an Apparent Volume Fraction of Soluble Material, Εv, Defined Such that for Particles Composed Only of Ammonium Sulfate and Water Insoluble Compounds, Εv is the Actual Volume Fraction of Soluble Material. the Probability Distribution of Εv is Found to Be Approximately Gaussian in the Εv Range 0.2 to 1.3. the Mean Εv is 0.5, for Electrostatic Aerosol Classifier Settings of …

Go to article

Group Set-Up For Printed Circuit Board Assembly, Tali F. Carmon, Oded Z. Maimon, Ezey M. Dar-El Jan 1989

Group Set-Up For Printed Circuit Board Assembly, Tali F. Carmon, Oded Z. Maimon, Ezey M. Dar-El

Industrial and Manufacturing Engineering

The current practice in the assembly of electronic components on printed circuit boards (PCBs) is serial production. a process characterized by very long set-up times. However, with the advent of efficient on-line process information .. new production control methods are now possible. This paper proposes a different production method, called the group set-up (GSU) method, which can significantly reduce set-up times. The traditional and the GSU production methods are compared, and it is shown that the GSU always performs better than the traditional method in terms of total production flow (throughput) and labour time However, the traditional method performs better …

Go to article

Evaluation Of Algrow As A Binder In Hydromulch And Preliminary Determination Of The Influence Of Algrow On Germination And Seedling Growth, C. Earl Israelsen, Gilberto Urroz, Ronald V. Canfield Jan 1989

Evaluation Of Algrow As A Binder In Hydromulch And Preliminary Determination Of The Influence Of Algrow On Germination And Seedling Growth, C. Earl Israelsen, Gilberto Urroz, Ronald V. Canfield

Reports

Introduction: The application of mulch during or immediately following seeding provides the minimum following advantages: energy dissipation of falling raindrops which decreases or eliminates erosion, prevention of surface-soil crusting, decreased water loss, and surface temperature modification. To better hold mulch in place, chemical binders are addd to it during munufacture or just before it is applied to the soil. Sometimes a binder is applied as an oversptray after the mulch is in place. (This overspray is generally referred to as a tackifier.) Algea Produkter A/S, Drammen, Norway, produces a product called ALGROW which may habe utility as a mulch binder …

Go to article

Toxicity And Environmental Health Hazards Of Petroleum Products In Wells Used For Drinking Water In The Intermountain West, Robert D.R. Parker, Raghubir P. Sharma, R. Ryan Dupont, Gin-Chang Hsieh Jan 1989

Toxicity And Environmental Health Hazards Of Petroleum Products In Wells Used For Drinking Water In The Intermountain West, Robert D.R. Parker, Raghubir P. Sharma, R. Ryan Dupont, Gin-Chang Hsieh

Reports

Introduction: Groundwater is aprimary source of drinking water for about 50 percent of the population in the U.S. This source of drinking water has been generally regarded as safe from contamination. Several papers indicate that numerous underground storage tanks containing petroleum products may be leaking and contaminating public water supply wells across the U.S. (Matis, 1971; Ferguson, 1979; Woodhull, 1981; Burmaster and Harris, 1982; Lehman, 1984; Dowd, 1984; OTA, 1984). A study conducted by the Utah Cureau of Solid and Hazardous Wastes in 1985 concluded that there are at least 2,314 underground steel tanks, most of which are used to …

Go to article

Soil Phase Photodegradation Of Toxic Organics At Contaminated Disposal Sites For Soil Renovation And Groundwater Quality Protection, W. M. Moore, R. Ryan Dupont, J. E. Mclean Jan 1989

Soil Phase Photodegradation Of Toxic Organics At Contaminated Disposal Sites For Soil Renovation And Groundwater Quality Protection, W. M. Moore, R. Ryan Dupont, J. E. Mclean

Reports

Accurate assessment of the potential for contaminated soil remediation requires detailed knowledge of the fate of waste constituents within the soil environment. For many non-biodegradable organics compounds, photochemical degradation may provide a potential pathway for the removal of such compounds from soil surfaces. A study was conducted to evaluate the rate of photodegradation of ten hazardous organic compounds from three soils, silica gel, and four soil minerals (kaolinite, montmorillonite, illite, and calcite) under conditions of controlled irradiation. In addition, the effect of siz amendment treatments (methylene blue, riboflavin, hydrogen peroxide, diethylamine, peat moss, and silica gel) on the rates of …

Go to article

Bear River Water Quality: Bioavailable Phosphorus Measurement, Sources, And Control, Kenneth W. Barker, Darwin L. Sorensen, Jay C. Andersen, Jean M. Ihnat Jan 1989

Bear River Water Quality: Bioavailable Phosphorus Measurement, Sources, And Control, Kenneth W. Barker, Darwin L. Sorensen, Jay C. Andersen, Jean M. Ihnat

Reports

No abstract provided.

Go to article

Friction Factor Tests On 300 Mm High Density Polyethylene Pipe, Steven L. Barfuss, J. Paul Tullis Jan 1989

Friction Factor Tests On 300 Mm High Density Polyethylene Pipe, Steven L. Barfuss, J. Paul Tullis

Reports

No abstract provided.

Go to article

Friction Factor Tests On 375 Mm High Density Polyethylene Pipe, Steven L. Barfuss, J. Paul Tullis Jan 1989

Friction Factor Tests On 375 Mm High Density Polyethylene Pipe, Steven L. Barfuss, J. Paul Tullis

Reports

No abstract provided.

Go to article

Coordinating Institutional Approaches To Assure Sustainable Groundwater Of Adequate Quality And Quantity In Utah, Richard C. Peralta, A. W. Peralta, K. Wyatt, Robert W. Hill Jan 1989

Coordinating Institutional Approaches To Assure Sustainable Groundwater Of Adequate Quality And Quantity In Utah, Richard C. Peralta, A. W. Peralta, K. Wyatt, Robert W. Hill

Civil and Environmental Engineering Faculty Publications

Utah is an arid state, without the abundant surface water resources enjoyed by states in the humid east. Most precipitation in the state falls in the higher elevations of the Uinta and Wasatch mountains of northern and central Utah. Much of this precipitation ultimately ends up in alluvial deposits at the base of these ranges, from which the vast majority of pumping wells draw their water (Barnes and Croft, 1986). This groundwater is an essential resource for use by the people of Utah. About sixty-three percent of Utah's population is at least partially reliant on groundwater for domestic use. In …

Go to article

Optimizing Short-Term Plume Containment: Comparison Of Well Arrangements., Herminio H. Suguino, Richard C. Peralta Jan 1989

Optimizing Short-Term Plume Containment: Comparison Of Well Arrangements., Herminio H. Suguino, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

Three well configurations were compared in terms of term ground-water contaminant plume containment. include parallel, octagonal and combination systems. system had three extraction wells upqradient and injection wells downgradient of the contaminant plume.
For each system, optimal pumping values and resulting potentiometric surface smoothness were computed for a hypothetical plume. Tested models utilized linear programming optimization and simulation via the response matrix method.
The octagonal well configuration required less pumping for a pumping period of 8 days, than did the parallel or combination systems. The octagonal configuration resulted in the smoothest potentiometric surface, in terms of difference in final head …

Go to article

First Prev Next Last