Engineering Commons^™

Anti-Corrosion Performance Of Magnesium Potassium Phosphate Cement Coating On Steel Reinforcement: The Effect Of Boric Acid, Fan Zhang, Jihui Qin, Kangyi Cai, John J. Myers, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

It has recently been found that magnesium potassium phosphate cement (MKPC) paste coating applied on the surface of steel reinforcement can effectively retard the onset of corrosion and suppress corrosion reactions. However, the fast-setting nature of MKPC—which is a merit in repair—can be problematic in a practical engineering process of coating the steel reinforcement with MKPC paste. To address this problem, boric acid (H₃BO₃) was added as a retarder in an MKPC formulation to prolong the setting time. This work investigated the impact of boric acid (at 5% by weight of MgO) on the anti-corrosion performance …

Combined 3d Fea And Machine Learning Design Of Inductive Polyphase Coils For Wireless Ev Charging, Lucas A. Gastineau, Donovin D. Lewis, Dan M. Ionel

Electrical and Computer Engineering Graduate Research

Wireless power transfer (WPT) technologies are currently researched and developed for charging the batteries of electric unmanned air and ground vehicles. This paper presents systems with special polyphase inductive coils, which generate rotating fields and achieve high power density and efficiency. The complex geometry is modeled and studied with 3D electromagnetic finite element analysis (FEA). In order to reduce the substantial computational effort, machine learning techniques are proposed for surrogate modeling. A deep learning algorithm is introduced to capture the physics-based relationships between geometry and electromagnetic properties in inductive coils for wireless charging. Parametric models are systematically generated and analyzed …

Beyond 2d: Novel Biomaterial Approaches For Modeling The Placenta, Samantha G. Zambuto, Adrienne K. Scott, Michelle L. Oyen

Biomedical Engineering Faculty Publications

This review considers fully three-dimensional biomaterial environments of varying complexity as these pertain to research on the placenta. The developments in placental cell sources are first considered, along with the corresponding maternal cells with which the trophoblast interact. We consider biomaterial sources, including hybrid and composite biomaterials. Properties and characterization of biomaterials are discussed in the context of material design for specific placental applications. The development of increasingly complicated three-dimensional structures includes examples of advanced fabrication methods such as microfluidic device fabri- cation and 3D bioprinting, as utilized in a placenta context. The review finishes with a discussion of the …

Size And Shape Dependence Of Hydrogen-Induced Phase Transformation And Sorption Hysteresis In Palladium Nanoparticles, Xingsheng Sun, Rong Jin

Chemical and Materials Engineering Faculty Publications

Phase transitions of metals in hydrogen (H) environments are critically import- ant for applications in energy storage, catalysis, and sensing. Nanostructured metallic particles can lead to faster charging and discharging kinetics, increased lifespan, and enhanced catalytic activities. However, establishing a direct causal link between nanoparticle structure and function remains challenging. In this work, we establish a computational framework to explore the atomic config- uration of a metal-hydrogen system when in equilibrium with a H environ- ment. This approach combines Diffusive Molecular Dynamics with an itera- tion strategy, aiming to minimize the system’s free energy and ensure uniform chemical potential across …

Accelerated Bridge Construction (Abc) Decision Tool, Phil Barutha, Marc Maguire, Elio Saldana, Fray F. Pozo-Lora

Nebraska Department of Transportation: Research Reports

This report investigates the creation and assessment of a decision-making tool developed to aid the Nebraska Department of Transportation (NDOT) in determining the suitability of the Accelerated Bridge Construction (ABC) method for bridge replacement projects. The tool utilizes the Analytic Hierarchy Process (AHP) to integrate different criteria, including Average Daily Traffic (ADT), Average Daily Truck Traffic (ADTT), detour time, railroad impact, economy of scale, and the use of typical details, which were found to be paramount in the decision-making process across the state. A sensitivity analysis was conducted to evaluate the tool’s performance and identify the most significant factors influencing …

Effect Of Antioxidant Additives And Recycling Agents On Performance Of Asphalt Binders And Mixtures – Phase Ii, Nitish R. Bastola, Muhammad Ahmad, Mahdieh Khedmati, Jamilla Teixeira, Hamzeh Haghshenas

Nebraska Department of Transportation: Research Reports

The use of reclaimed asphalt pavement (RAP) in combination with recycling agents (RAs) (i.e., rejuvenators or softening agents) has gained significant attention from the pavement industry as a sustainable pavement solution, reducing the carbon footprint of manufactured products through the conservation of energy and reduction on the use of raw materials. Current research has found that RAs can improve RAP recycled asphalt mixture’s cracking resistance, while being capable of maintaining their rutting resistance. However, there are some concerns about the effect of RAs on the moisture damage resistance and the long-term performance (aging) of these additives. The current need is …

Lithicone-Protected Lithium Metal Anodes For Lithium Metal Batteries With Nickel-Rich Cathode Materials, Ridwan A. Ahmed, Kevin V. Carballo, Krishna P. Koirala, Qian Zhao, Peiyuan Gao, Ju-Myung Kim, Cassidy S. Anderson, Xiangbo Meng, Chongmin Wang, Ji-Guang Zhang, Wu Xu

Mechanical Engineering Faculty Publications and Presentations

The high energy density advantage of lithium (Li) metal batteries (LMBs) makes them increasingly desirable; however, problems such as strong reactivity and dendrite growth of Li metal anode limit their practical uses. In this work, a novel Li-containing glycerol (LiGL) or lithicone protection layer on a 50 μm thick Li metal anode is employed for improving the performance of LMBs. This LiGL layer was accurately deposited via a molecular layer deposition (MLD) process at 150°C, using lithium tert-butoxide and glycerol as precursors. The as-formed LiGL coating layer is highly tunable in its thickness by simply adjusting MLD cycles and shows …

Investigating The Effect Of Microwave Pretreatment On Bastnasite Grinding For Comminution Energy Reduction And Rare Earth Recovery, Kaveh Asgari, Qingqing Huang, Rick Q. Honaker, Edward Sabolsky

Chemical and Materials Engineering Faculty Publications

This study explored the impact of microwave pretreatment on the grinding efficiency of bastnaesite ore using a stirred mill. Bastnaesite ore was prepared using a staged crushing and sieving process, followed by microwave pretreatment in a specially designed microwave furnace system. Representative samples of the crushed ore underwent stirred mill grinding, with power draw measurements recorded and adjusted to reflect only the specific energy input required for grinding. Particle size distribution was analyzed periodically using laser particle size analysis. In addition, a Box–Behnken design was used to statistically assess the effects of various parameters on the results, ensuring a robust …

Development Of Crop2cloud: An Iot-Integrated Platform For Automated Irrigation Scheduling Using Multi-Source Stress Indices, Bryan Nsoh

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Efficient water management in agriculture is critical, as irrigation accounts for 70% of global freshwater withdrawals. While precision agriculture technologies offer potential solutions, integrating diverse data streams for real-time irrigation scheduling remains challenging, particularly in combining plant and soil-based stress indicators. This research addresses these challenges through three interconnected studies.

A systematic review first examined the current state and future potential of IoT-based automated irrigation management systems, analyzing how these technologies can enhance agricultural water use efficiency and crop productivity. The review identified critical gaps in data integration and real-time processing while highlighting opportunities for combining multiple stress indices for …

Engineering The Coherent Phonon Transport In Polar Ferromagnetic Oxide Superlattices, In Hyeok Choi, Seung Gyo Jeong, Do-Gyeom Jeong, Ambrose Seo, Woo Seok Choi, Jong Seok Lee

Chemical and Materials Engineering Faculty Publications

Artificial superlattices composed of perovskite oxides serves as an essential platform for engineering coherent phonon transport by redefining the lattice periodicity, which strongly influences the lattice-coupled phase transitions in charge and spin degrees of freedom. However, previous methods of manipulating phonons have been limited to controlling the periodicity of superlattice, rather than utilizing complex mutual interactions that are prominent in transition metal oxides. In this study on oxide superlattices composed of ferromagnetic metallic SrRuO3 and quantum paraelectric SrTiO3 , phonon modulation by controlling the geometry of superlattice in atomic-scale precision is realized, demonstrating the coherent phonon engineering using structural and …

Underrepresented Minority Faculty In The Usa Face A Double Standard In Promotion And Tenure Decisions, Theodore Masters-Waage, Christiane Spitzmueller, Ebenezer Edema-Sillo, Ally St. Aubin, Michelle Penn-Marshall, Erika Henderson, Peggy Lindner, Cynthia Werner, Tracey Rizzuto, Juan Madera

Engineering Management and Systems Engineering Faculty Research & Creative Works

Underrepresented minority (URM) faculty face challenges in many domains of academia, from university admissions to grant applications. We examine whether this translates to promotion and tenure (P&T) decisions. Data from five US universities on 1,571 faculty members' P&T decisions show that URM faculty received 7% more negative votes and were 44% less likely to receive unanimous votes from P&T committees. A double standard in how scholarly productivity is rewarded is also observed, with below-average h-indexes being judged more harshly for URM faculty than for non-URM faculty. This relationship is amplified for faculty with intersectional backgrounds, especially URM women. The differential …

Atmosphere Effects In Laser Powder Bed Fusion: A Review, Ben Brown, Cody Lough, Davis Wilson, Joseph Newkirk, Frank Liou

Materials Science and Engineering Faculty Research & Creative Works

The use of components fabricated by laser powder bed fusion (LPBF) requires the development of processing parameters that can produce high-quality material. Manipulating the most commonly identified critical build parameters (e.g., laser power, laser scan speed, and layer thickness) on LPBF equipment can generate acceptable parts for established materials and moderately intricate part geometries. The need to fabricate increasingly complex parts from unique materials drives the limited research into LPBF process control using underutilized parameters, such as atmosphere composition and pressure. As presented in this review, manipulating atmosphere composition and pressure in laser beam welding has been shown to expand …

Engineering Technology Capstone: Exploring The Current State, Rustin Webster, Matthew Turner

School of Engineering Technology Faculty Publications

The characteristics that make up the general identity of engineering technology (ET) degree programs and their graduates are well known; however, the explicit characteristics of ET capstone nationally is unknown. In other words, there are multiple gaps in the general ET capstone body of knowledge that need to be filled in order to fully understand and describe the current state. The purpose of this short paper is to provide a synopsis of 1) the current known identity of ET education, 2) existing ET capstone research, and 3) ET capstone knowledge gaps (i.e., future research areas). Internal preliminary findings comparing traditional …

Editorial To Advances In Minimally Invasive Spine Surgery, Gabriel C. Tender, George A. Crabill

School of Medicine Faculty Publications

No abstract provided.

Safety-Centric Analysis Of Grounding Systems For Substations In Distribution Grids, Fazel Mohammadi, Mahmood Mirhashemi

Electrical & Computer Engineering and Computer Science Faculty Publications

The safety of grounding systems for substations in distribution grids is paramount to ensuring operational reliability, protecting personnel and equipment, and maintaining the stability of distribution grids while complying with regulatory standards. This paper explores essential safety aspects of grounding systems, including fault current handling strategies, the interdependence between protective devices and grounding systems, and maintenance practices. The integration of grounding systems design with overall substation layout and design considerations by focusing on mitigating Ground Potential Rise (GPR) and optimizing bonding techniques, is examined. Additionally, advanced techniques, such as high-frequency grounding and Transient Ground Potential Rise (TGPR) management, are presented …

Optimal Control Of Nonlinear, Nonautonomous, Energy Harvesting Systems Applied To Point Absorber Wave Energy Converters, Houssein Yassin, Tania Demonte Gonzalez, Kevin Nelson, Gordon Parker, Wayne Weaver

Michigan Tech Publications

Pursuing sustainable energy solutions has prompted researchers to focus on optimizing energy extraction from renewable sources. Control laws that optimize energy extraction require accurate modeling, often resulting in time-varying, nonlinear differential equations. An energy-maximizing optimal control law is derived for time-varying, nonlinear, second-order, energy harvesting systems. We demonstrate that sustaining periodic motion under this control law when subjected to periodic disturbances necessitates identifying appropriate initial conditions, inducing the system to follow a limit cycle. The general optimal solution is applied to two point absorber wave energy converter models: a linear model where the analytical derivation of initial conditions suffices and …

Insulator-To-Metal Transition And Isotropic Gigantic Magnetoresistance In Layered Magnetic Semiconductors, Gokul Acharya, Bimal Neupane, Chia-Hsiu Hsu, Xian P. Yang, David Graf, Eun Sang Choi, Krishna Pandey, Md Rafique Un Nabi, Santosh Karki Chhetri, Rabindra Basnet, Sumaya Rahman, Jian Wang, Zhengxin Hu, Bo Da, Hugh O.H. Churchill, Guoqing Chang, M. Zahid Hasan, Yuanxi Wang, Jin Hu

Physics Faculty Publications and Presentations

Magnetotransport, the response of electrical conduction to external magnetic field, acts as an important tool to reveal fundamental concepts behind exotic phenomena and plays a key role in enabling spintronic applications. Magnetotransport is generally sensitive to magnetic field orientations. In contrast, efficient and isotropic modulation of electronic transport, which is useful in technology applications such as omnidirectional sensing, is rarely seen, especially for pristine crystals. Here a strategy is proposed to realize extremely strong modulation of electron conduction by magnetic field which is independent of field direction. GdPS, a layered antiferromagnetic semiconductor with resistivity anisotropies, supports a field-driven insulator-to-metal transition …

Flow Dynamic Factors Correlated With Device-Related Thrombosis After Left Atrial Appendage Occlusion, Brennan Vogl, Emily Vitale, Sunyoung Ahn, Agata Sularz, Alejandra Chavez Ponce, Gerardo V. Lo Russo, Jeremy Collins, Alessandra Maria Bavo, Ahmed El Shaer, Anders Kramer, Yuheng Jia, Davorka Lulic, Matthieu De Beule, Jens Erik Nielsen-Kudsk, Ole De Backer, Mohamad Alkhouli, Hoda Hatoum

Michigan Tech Publications

Background: Device-related thrombosis (DRT) occurs in up to 4% of patients undergoing left atrial appendage occlusion (LAAO) and is associated with substantial morbidity and mortality. However, its pathophysiology, predictors, and optimal management remain unclear. Objectives: This study aims to assess flow dynamic factors correlating to DRT. Methods: A multicenter registry of patients who underwent LAAO and had pre- and post-computed tomography imaging was used. Patient-specific 3-dimensional digital models of the left atrium were created, and finite element simulations were performed to implant an LAAO device into each model in a position that matched the clinical deployment. Computational fluid dynamic simulations …

Blackberry Growth Monitoring And Feature Quantification With Unmanned Aerial Vehicle (Uav) Remote Sensing, Akwasi Tagoe, Alexander Silva, Cengiz Koparan, Aurelie Poncet, Dongyi Wang, Donald Johnson, Margaret Worthington

Biological and Agricultural Engineering Faculty Publications and Presentations

Efficiently managing agricultural systems necessitates accurate data collection from crops to examine phenotypic characteristics and improve productivity. Traditional data collection processes for specialty horticultural crops are often subjective, labor-intensive, and may not provide accurate information for precise management decisions in phenotypic studies and crop production. Reliable and standardized techniques to record and evaluate crop features using agricultural technology are essential for improving agricultural systems. The objective of the research was to develop a methodology for accurate measurement of blackberry flowers and vegetation coverage using UAV remote sensing and image analysis. The UAV captured 20,812 images in the visible spectrum, and …

Mechanisms Of Extracellular Vesicle Uptake And Implications For The Design Of Cancer Therapeutics, Stephanie R. Jackson Cullison, Joseph P. Flemming, Kubra Karagoz, Peter J. Wermuth, Mỹ G. Mahoney

Department of Pharmacology, Physiology, and Cancer Biology Faculty Papers

The translation of pre-clinical anti-cancer therapies to regulatory approval has been promising, but slower than hoped. While innovative and effective treatments continue to achieve or seek approval, setbacks are often attributed to a lack of efficacy, failure to achieve clinical endpoints, and dose-limiting toxicities. Successful efforts have been characterized by the development of therapeutics designed to specifically deliver optimal and effective dosing to tumour cells while minimizing off-target toxicity. Much effort has been devoted to the rational design and application of synthetic nanoparticles to serve as targeted therapeutic delivery vehicles. Several challenges to the successful application of this modality as …

Techniques For Modeling Ocean Soundscapes: Detailed Description For Wind Contributionsa, Martin Siderius, Michael A. Ainslie, John Gebbie, Alexandra Schäfke, N Ross Chapman, Bruce Martin, Kay L. Gemba

Electrical and Computer Engineering Faculty Publications and Presentations

Wind over the ocean creates breaking waves that generate air-filled bubbles, which radiate underwater sound. This wind-generated sound is a significant component of the ocean soundscape, and models are essential for understanding and predicting its impact. Models for predicting sound pressure level (SPL) from wind have been studied for many years. However, the terminology and definitions behind modeling approaches have not been unified, and ambiguity has led to differences in predicted SPL. The 2022 Ambient Sound Modeling Workshop was organized to compare ambient sound modeling approaches from different researchers. The main goal of the workshop was to quantify differences in …

Verifying Models Of The Underwater Soundscape From Wind And Ships With Benchmark Scenariosa), S Bruce Martin, Martin Siderius, Michael A. Ainslie, Michele B. Halvorsen, Leila Hatch, Mark K. Prior, Daniel Brooker, James Caplinger, Christine Erbe, John Gebbie, Multiple Additional Authors

Electrical and Computer Engineering Faculty Publications and Presentations

Models of the underwater acoustic soundscape are important for evaluating the effects of human generated sounds on marine life. The performance of models can be validated against measurements or verified against each other for consistency. A verification workshop was held to compare models that predict the soundscape from wind and vessels and estimate detection ranges for a submerged target. Eight modeling groups participated in the workshop which predicted sound levels with observation windows of 1 min and 1 km2. Substantial differences were found in how modelers computed the propagation losses for decidecade bands and estimated the source level of wind. …

An Overview Of Ancillary Services Provided By Vehicle-To-Grid Systems, Fazel Mohammadi, Mahmood Mirhashemi

Electrical & Computer Engineering and Computer Science Faculty Publications

Vehicle-to-Grid (V2G) systems are emerging as a pivotal technology in modern power systems, offering a range of ancillary services that enhance the stability and reliability of power systems. This paper provides an overview of the key ancillary services provided by V2G systems, highlighting their role in grid modernization. Technical challenges, economic implications, and policy considerations associated with the deployment of V2G systems are explored to assess their potential impact on advancing a more resilient and sustainable energy infrastructure.

Implementation Of Mash Surrogate Test Vehicles For Sign Supports, Breakaway Poles, And Work Zone Traffic Control Devices, Mahfuza Rahman Doreen

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This describes the development of two surrogate test vehicles, or "bogie vehicles," for performing compliance testing of breakaway devices found on the roadside according to the American Association of State Highway and Transportation Officials (AASHTO) Manual for Assessing Safety Hardware (MASH). Historically, surrogate vehicle testing and approval of roadside structures was not permitted, because critical vehicle behaviors could not be emulated using the existing or modified rigid frame structures. Therefore, Project NCHRP 22-55 was funded to develop two reusable bogie vehicles to emulate the MASH 1100C small car and 2270P pickup truck. This thesis describes the background data collection, initial …

Bridging Human And Machine Intelligence: Reverse-Engineering Radiologist Intentions For Clinical Trust And Adoption, Akash Awasthi, Ngan Le, Zhigang Deng, Rishi Agrawal, Carol C. Hu, Hien Van Nguyen

Computer Science and Computer Engineering Faculty Publications and Presentations

In the rapidly evolving landscape of medical imaging, the integration of artificial intelligence (AI) with clinical expertise offers unprecedented opportunities to enhance diagnostic precision and accuracy. Yet, the "black box" nature of AI models often limits their integration into clinical practice, where transparency and interpretability are important. This paper presents a novel system leveraging the Large Multimodal Model (LMM) to bridge the gap between AI predictions and the cognitive processes of radiologists. This system consists of two core modules, Temporally Grounded Intention Detection (TGID) and Region Extraction (RE). The TGID module predicts the radiologist's intentions by analyzing eye gaze fixation …

Noncontact Diffuse Reflectance Spectroscopy Of Synovial Fluid Samples For Rapid Identification Of Infections, Erin E. Drewke, Robert L. Brand, Caroline G. Geels, Hanna K. Jensen, Kevin Wong, Jarret D. Sanders, Narasimhan Rajaram

Biomedical Engineering Faculty Publications and Presentations

Severe joint infections, such as septic arthritis, require rapid diagnostic testing of the synovial fluid aspirated from joints level so that a surgical team can be assembled quickly. We present a diffuse reflectance spectroscopy (DRS) system for noncontact determination of infection. Using a light-tight syringe holder and fiber optic probe, diffusely reflected light from 475 to 655 nm was acquired from 18 patient samples through the wall of a syringe in a noncontact and sterile manner. We determined the reflectance ratios at two different wavelengths—R ₄₉₀/R ₆₀₀ and R ₅₈₀/R ₆₀₀ and found statistically significant …

Mitigating Operational Greenhouse Gas Emissions In Ageing Residential Buildings Using An Urban Digital Twin Dashboard, Pradeep Alva, Martín Mosteiro-Romero, Clayton Miller, Rudi Stouffs

Research Collection College of Integrative Studies

With the increasing stock of ageing infrastructure and resource constraints in Singapore, related risks and carbon emissions can be mitigated through long-term resilience planning, automated building inspection, and effective maintenance. Sustainable actions are needed to maintain Singapore's ageing infrastructure. Hence, a state-of-the-art control and management system is required in the form of smart city digital tools. We introduce an Urban Digital Twin (UDT)—GHG App for decision-makers in Singapore's operational building greenhouse gas (GHG) emission mitigation and decarbonisation initiatives. Based on multiple-criteria decision analysis (MCDA), a Potential for Intervention (PFI) map was created to rejuvenate the building system. Decision-makers can use …

Causal Knowledge Graph For Scene Understanding In Autonomous Driving, Utkarshani Jaimini, Cory Henson, Amit Sheth

Publications

The current approaches to autonomous driving focus on learning from observation or simulated data. These approaches are based on correlations rather than causation. For safety-critical applications, like autonomous driving, it’s important to represent causal dependencies among variables in addition to the domain knowledge expressed in a knowledge graph. This will allow for a better understanding of causation during scenarios that have not been observed, such as malfunctions or accidents. The causal knowledge graph, coupled with domain knowledge, demonstrates how autonomous driving scenes can be represented, learned, and explained using counterfactual and intervention reasoning to infer and understand the behavior of …

Liquid Crystalline Collagen Assemblies As Substrates For Directed Alignment Of Human Schwann Cells, Homa Ghaiedi, Luis Carlos Pinzon-Herrera, Saja Alshafeay, Leonard Harris, Jorge Almodovar, Karthik Nayani

Chemical Engineering Faculty Publications and Presentations

Collagen is a key component of the extracellular matrix (ECM) and well-oriented domains of collagen are important for mimicking the local cell environment in vitro. While there has been significant attention directed towards the alignment of collagen, formation of large-scale oriented domains remains a key challenge. Type I collagen self-assembles to form liquid crystalline (LC) mesophases in acidic conditions at concentrations above 100 mg mL−1. The LC mesophase provides an efficient platform for large-scale alignment and patterning of collagen coated substrates. However, there still exist challenges related to solubilizing and processing of collagen at such high concentrations in order …

Irl For Restless Multi-Armed Bandits With Applications In Maternal And Child Health, Gauri Jain, Pradeep Varakantham, Haifeng Xu, Aparna Taneja, Prashant Doshi, Milind Tambe

Research Collection School Of Computing and Information Systems

Public health practitioners often have the goal of monitoring patients and maximizing patients’ time spent in “favorable” or healthy states while being constrained to using limited resources. Restless multi-armed bandits (RMAB) are an effective model to solve this problem as they are helpful to allocate limited resources among many agents under resource constraints, where patients behave differently depending on whether they are intervened on or not. However, RMABs assume the reward function is known. This is unrealistic in many public health settings because patients face unique challenges and it is impossible for a human to know who is most deserving …