Engineering Commons^™

Monitoring Of Ac Motors Parameters Using Industrial Internet Of Things, Mohammad Muheisen

Theses and Dissertations

In this thesis, the industrial internet of things has been introduced, as a very newborn research field. The suggested prototype has been assembled at the university laboratory to simulate the system conditions. Two three-phase induction motors have been utilized to perform this study, to monitor and gather data, regarding vibration and temperature. As a very newborn field, the data collected from the two motors can be analyzed to achieve a couple of goals, in energy consumption, to reduce the financial burden of the remedy works. A fast Fourier transformer has been applied to measure the motor's vibrations, and the current …

Graphene-Conductive Ink Coated Laser Engraved Kapton Electrochemical Biosensor For The Detection Of Dopamine And Immune Sensing, Dipannita Ghosh

Theses and Dissertations

Novel and flexible disposable laser-engraved Kapton (LEK) electrodes modified with graphene conductive inks have been developed for dopamine and Interleukin-6 (IL-6) detection. The LEK sensors exhibit high reproducibility (RSD=0.76%, N=5) and stability (RSD=4.39%, N=15)after multiple bendings, and thus make the sensors ideal for wearable and stretchable bioelectronics applications. We have developed graphene conductive ink- PEDOT:PSS (G-PEDOT:PSS) and polyaniline (G-PANI) based electrode coatings for working electrode modification to improve the sensitivity (41.41 times higher for screen printed electrode with G-PEDPT:PSS ink modification),and limit of detection (LOD) . We have further compared the performance of the fabricated electrodes with commercially available screen-printed …

A Reconfigurable Architecture For Matrix Multiplication For Low Power Applications, Jeffrey Love

Electrical and Computer Engineering ETDs

This thesis presents a hardware architecture for performing matrix multiplication via a systolic array to reduce time complexity and power consumption. The proposed architecture, the Neural Network Accelerator (NNA), was designed in Verilog HDL to perform 8-bit multiplication to reduce the resources required to implement the NNA on low-power FPGAs. The NNA’s open architecture is designed to support radiation test for fault tolerant designs targeting space applications. Commercial hardware architecture information is not public knowledge, which led us to build our own matrix multiplication architecture so that we could later study its feasibility for space applications.

The NNA was compared …

Universal Short-Circuit And Open-Circuit Fault Detection For An Inverter, Buck Brown

All Theses

Short-circuit and open-circuit faults of an inverter’s power device often lead to catastrophic failure of the entire system if not detected and acted upon within a few microseconds, particularly for emerging wide bandgap (WGB) power semiconductors. While a significant amount of research has been done on the fast and accurate protection and detection of short-circuit faults, there has been less success corresponding to the research on open-circuit faults. Common downfalls include protection and detection that are too application-specific, take longer than a couple of microseconds, and are not cost-efficient. This study proposes a new open-circuit fault protection and detection system …

Considerations Of The Impacts And System-Level Mitigation Of Electric Vehicle Charging On The Integrated Resource Planning Process, Grant Wollam

All Theses

Electric vehicles (EV) are growing in popularity and therefore adoption rate. Best estimates predict a 6.2% EV adoption rate by 2035 in the southeastern United States. With this level of EV adoption, utility planners must begin to consider the impact that EVs will have on the power grid. This paper aims to help predict these EV impacts on the power grid. Specifically, an urban-commercial feeder is analyzed in detail to provide worst-case and most-likely results of varying levels of EV impact. Results show that a 26.2% peak increase is the most likely result for this feeder in 2035.

Mitigation techniques …

Procedural City Generation With Combined Architectures For Real-Time Visualization, Griffin Poyck

All Theses

The work and research of this paper sought to build upon traditional city generation and simulation in creating a tool that both realistically simulates cities and their prominent features and also creates aesthetic and artistically rich cities using assets that combine several contemporary or near contemporary architectural styles. The major city features simulated are the surrounding terrain, road networks, individual buildings, and building placement. The tools used to both create and integrate these features were created in Houdini with Unreal Engine 5 as the intended final destination. This research was influenced by the city, town, and road networking of Ghost …

A Novel Deep Learning, Camera, And Sensorbased System For Enforcing Hand Hygiene Compliance In Healthcare Facilities, Samyak Shrimali, Christof Teuscher

Electrical and Computer Engineering Faculty Publications and Presentations

Hospital-acquired infections are a major cause of death worldwide, and poor hand hygiene compliance is a primary reason for their spread. This paper proposes an artificial intelligence, microcontroller, and sensor-based system that monitors and improves staff hand hygiene compliance at various critical points in a hospital. The system uses a Convolutional Neural Network (CNN) to detect and track if staff have followed the WHO hand rub/hand wash guidelines at alcohol dispensers, hospital sinks, and patient beds. The system also uses RFID tags, vibration motors, LEDs, and a central server to identify staff, alert them of their cleaning requirements, monitor their …

The Networked Nitrous Node: A Low-Power Field-Deployable Cots-Based N2o Gas Sensor Platform, Ronaldo Leon, Wenyu Bi, Eyal Eynis, Travis Johnson, Wei Yan, David C. Burnett, John M. Acken

Electrical and Computer Engineering Faculty Publications and Presentations

We present a wireless nitrous oxide (N 2 O) gas sensor system consisting of a commercial high-current infrared N 2 O sensor wrapped in a “smart” sensor framework to make it suitable for battery-powered deployment. This framework consists of wireless mesh networking, data storage, additional environmental sensors, and a gas sensor power control circuit managed by a central microcontroller. The N 2 O sensor is the first order consumer of power and sampling N 2 O at approximately ten minute intervals yields an estimated system lifetime of 63 days when using four 18650 Li-ion batteries. The node stores data locally …

A Pwm Method For Reducing Dv/Dt And Switching Losses In Two-Stage Power Converters, Mahima Gupta, Abhijeet Prem

Electrical and Computer Engineering Faculty Publications and Presentations

Today's semiconductor devices are accompanied by high switching frequencies (> kilo-hertz) and small transition times (< micro-seconds). Such fast transition times are accompanied by undesirable effects such as voltage overshoots at the load terminals, ground leakage currents, wide-band electromagnetic noise, etc. With the advent of wide band-gap devices, several applications are moving towards higher switching frequency operation with at-least an order of magnitude reduction in transition times. While these characteristics are considered necessary to break the next-generation barriers in power density, efficiency and applicability, the undesirable effects due to faster transitions are expected to present obstacles. This work proposes a PWM approach to modify the shape of the switching voltages to overcome the disadvantages of the fast transition times without any increase in switching losses. In fact, several of the switching transitions feature ZVS operation, resulting in reduced switching losses. The paper discusses the analytical details of the approach using a simple DC-DC boost-buck converter and extends it to a DC to three-phase AC converter using the principles of space vector modulation. The paper presents detailed simulation and comparative results in terms of voltage over-shoots over long cables, loss calculations and electromagnetic noise. Results from a laboratory-scale working prototype confirm the benefits of the proposed approach in terms of EMI and loss reduction.

Iii-Nitride Triangular Microcantilevers For Multimodal Sensing Applications, Balaadithya Uppalapati

All Dissertations

Micro-electromechanical systems (MEMS)-based sensors have gained significant attention due to their ability to sense, measure, and process various physical, chemical, and biological parameters. The small size of MEMS sensors provides numerous advantages, including low power consumption, high sensitivity, and rapid response time, making them suitable for various applications in healthcare, automotive, aerospace, and consumer electronics.

In the past few years, AlGaN/GaN MEMS devices have been found to offer several advantages over silicon-based MEMS devices. One of the main advantages of AlGaN/GaN MEMS is their high sensitivity to surface stresses and forces due to their high piezoelectric coefficients. This sensitivity allows …

Deep Reinforcement Learning And Game Theoretic Monte Carlo Decision Process For Safe And Efficient Lane Change Maneuver And Speed Management, Shahab Karimi

All Dissertations

Predicting the states of the surrounding traffic is one of the major problems in automated driving. Maneuvers such as lane change, merge, and exit management could pose challenges in the absence of intervehicular communication and can benefit from driver behavior prediction. Predicting the motion of surrounding vehicles and trajectory planning need to be computationally efficient for real-time implementation. This dissertation presents a decision process model for real-time automated lane change and speed management in highway and urban traffic. In lane change and merge maneuvers, it is important to know how neighboring vehicles will act in the imminent future. Human driver …

Enhanced Mobile Networking Using Multi-Connectivity And Packet Duplication In Next-Generation Cellular Networks, Prabodh Mishra

All Dissertations

Modern cellular communication systems need to handle an enormous number of users and large amounts of data, including both users as well as system-oriented data. 5G is the fifth-generation mobile network and a new global wireless standard that follows 4G/LTE networks. The uptake of 5G is expected to be faster than any previous cellular generation, with high expectations of its future impact on the global economy. The next-generation 5G networks are designed to be flexible enough to adapt to modern use cases and be highly modular such that operators would have the flexibility to provide selective features based on user …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

Entropy Aided Rf-Dna Fingerprint Learning From Gabor-Based Images, Mohamed Alfatih Taha

Masters Theses and Doctoral Dissertations

The number of devices connected to the internet have been increasing and shape Internet of Things (IoT). The security of IoT is an issue due to the use of weak or no encryption. Specific Emitter Identification (SEI) was introduced to overcome this issue by introduce RF-DNA fingerprinting exploring the PHY layer features. Recently, The SEI performance improved by the usage of the signal’s Time Frequency (TF) representation and accelerated using the Deep learning (DL) Convolutional Neural Network (CNN). While the classification accuracy has been improved from using raw signals learning the amount of data generated is large and computationally expensive. …

When Less Is More: How Increasing The Complexity Of Machine Learning Strategies For Geothermal Energy Assessments May Not Lead Toward Better Estimates, Stanley P. Mordensky, John Lipor, Jacob Deangelo, Erick R. Burns, Cary R. Lindsey

Electrical and Computer Engineering Faculty Publications and Presentations

Previous moderate- and high-temperature geothermal resource assessments of the western United States utilized data-driven methods and expert decisions to estimate resource favorability. Although expert decisions can add confidence to the modeling process by ensuring reasonable models are employed, expert decisions also introduce human and, thereby, model bias. This bias can present a source of error that reduces the predictive performance of the models and confidence in the resulting resource estimates.

Our study aims to develop robust data-driven methods with the goals of reducing bias and improving predictive ability. We present and compare nine favorability maps for geothermal resources in the …

Analyzing The Influence Of Stale Data On Autonomous Intelligent Transportation Systems, August St. Louis

All Theses

Intelligent transportation has been at the forefront of recent technological advancement. Individuals have developed a number of algorithms intended to automate and improve essential intelligent transportation functions. New developments include the incorporation of vehicle platooning and path planning algorithms within a number of use cases. Data perturbation can affect both algorithms significantly. We define data perturbation as any natural or unnatural phenomenon that causes the data to be skewed in any way. Perturbations within either system can cause its respective algorithm to operate with stale or incorrect data. This can significantly affect performance. This paper conducts a fault injection campaign …

Peak To Average Power Ratio Reduction In Spectrally Efficient Fdm Using Repeated Clipping And Filtering, Buthaina Mosa Omran, Yamaan Esmiel Majeed, Iftekhar Ahmad

Research outputs 2022 to 2026

Multi-carrier transmission may be considered one of the important developments in wireless communications. Spectrally efficient frequency division multiplexing (SEFDM) is a promising multi-carrier modulation which can significantly improve utilization of spectral. The SEFDM has high peak to average power ratio (PAPR) like any multicarrier system. High PAPR reduces the random forest (RF) transmitter power amplifier efficiency, which minimize the use of this technique in limited power supply transmitters. In this work, a repeated clipping and filtering method is introduced to reduce the PAPR in SEFDM with minimum or no out of band radiation. The results of the simulated approach show …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

State Estimation And Data Fusion With Data-Driven Communication, Xiaolei Bian

University of New Orleans Theses and Dissertations

This dissertation focuses on the systemic design of proper estimation as well as fusion techniques and data-driven communication schemes to infer the state of a dynamic discrete-time linear system over a wireless network. The goal is to effectively extract and share key information over networks to enhance estimates of system states. Such co-design research is drawn by the need to leverage limited resources (communication bandwidth, energy and computational power) for a multitude of data and data sources in networked systems.

We first build the overarching structure by synthesizing communication and estimator/fuser, and research the collective behaviors of the system.

In …

Comparison Of Facial Emotion Recognition Models Using Deep Learning, Arsany Hanin

University of New Orleans Theses and Dissertations

Facial emotion recognition is a widely studied area with applications in diverse domains such as human-computer interaction, affective computing, and social robotics. This thesis aims to improve the accuracy of facial emotion recognition models by incorporating a second neural network trained on original probabilities and probability transformation, while also comparing the performance of different techniques. The thesis begins with a thorough review of available datasets and technologies used for data collection, highlighting the challenges associated with these datasets. A detailed analysis of various facial emotion detection models, including the baseline model and its different architectures, is presented. The thesis also …

Generation Of Plasma With A Rotating Electric Field, Franklin Price Mosely

Electrical & Computer Engineering Theses & Dissertations

Nonthermal plasma generation is an important area of research that has many applications ranging from semiconductor production to medical applications including the treatment of cancers and sterilization of surfaces. Specific radicals and excited species and discharge powers are critical for the successful completion of these processes. It is important that these excited species are shown to be achievable for a given discharge system without leading to instabilities such as arcing.

The present thesis details the design, fabrication, testing, and analysis of a novel plasma generation system based on multiphase excitation. As predicted by theory, the experimental results demonstrate that a …

An Efficient Deep Learning Architecture For Turkish Lira Recognition And Counterfeit Detection, Burak İyi̇kesi̇ci̇, Ergun Erçelebi̇

Turkish Journal of Electrical Engineering and Computer Sciences

Banknote counterfeiting is a common practice worldwide. Due to the recent developments in technology, banknote imitation has become easier than before. There are different kinds of algorithms developed for the detection of counterfeit banknotes for different countries in the literature. The earlier algorithms utilized classical image processing techniques where the implementations of machine learning and deep learning algorithms appeared with the developments in the artificial intelligence field as well as the computer hardware. In this study, a novel convolutional neural networks-based deep learning algorithm has been developed that detects counterfeit Turkish Lira banknotes and their denominations using the banknote images …

Trace Dna Detection Using Diamond Dye: A Recovery Technique To Yield More Dna, Leah Davis

Master's Theses

This study aspires to find a new screening approach to trace DNA recovery techniques to yield a higher quantity of trace DNA from larger items of evidence. It takes the path of visualizing trace DNA on items of evidence with potential DNA so analysts can swab a more localized area rather than attempting to recover trace DNA through the general swabbing technique currently used for trace DNA recovery. The first and second parts consisted of observing trace DNA interaction with Diamond Dye on porous and non-porous surfaces.

The third part involved applying the Diamond Dye solution by spraying it onto …

Effect On Focusing Fields By Ferromagnetic Cell Cores In Linear Induction Accelerators, Cooper Guillaume

Senior Honors Theses

In the Los Alamos National Laboratories DARHT facility, there are two perpendicular linear induction accelerators, LIAs. The LIAs’ solenoids produce magnetic fields which focus the electron beam. Simultaneously, the accelerating pulse creates a magnetic field. These two field intensities act upon a ferromagnetic material in the cells to enhance magnetic flux density. Due to the nonlinearity of the material, this flux density will reach a saturation point. In turn, the magnetic field intensity of the axial solenoidal magnetic field will be affected and slightly altered. The width of the electron beam will increase, causing a decrease in effectiveness. Through simulation, …

Trajectory Analysis For Driving Safety Quantification, Michael I. Chang

UNLV Theses, Dissertations, Professional Papers, and Capstones

In order to evaluate the efficacy of the skid recovery exercise in the Driver’s Edge teenage driving program, a process is established to determine the trajectories of vehicles from recorded videos, compare them in terms of similarity through dynamic time warping (DTW), and then analyze the similarity measurements to assess whether the program has a significant effect on driving ability by repeated measures analysis of variance (rANOVA). The video is analyzed by Harris corner detection and Lucas-Kanade optical flow method to ascertain the vehicle trajectories. A homography is then estimated to translate coordinates from video into real-world. The instructor and …

Analysis And Application Of Finite Element And High-Order Finite Difference Methods For Maxwell’S Equations In Complex Media, Li Zhu

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Perfectly Matched Layer (PML) technique is an effective tool introduced by B´erenger [13] to reduce the unbounded wave propagation problem to a bounded domain problem. This dissertation focuses on two different PML models and their applications to wave propagation problems with Maxwell’s equation in complex media. We investigate these models using two popular numerical methods: the Finite Difference Method (FDM) in Chapters 2 and 3, and the Finite Element Method (FEM) in Chapters 4 and 5.In Chapter 2, we focus on analyzing the stability of a PML developed by B’ecache et al. [10] for simulating wave propagation in the …

A Low Power, Rad-Hard, Ecl Standard Cell Library, Zakaraya A. Hamdan

Masters Theses

Space exploration for life both inside and outside of our solar system demand the design and fabrication of robust, reliable electronics that can take measurements, process data, and sustain necessary operations. However, the presence of high radiation and the cold temperature of space poses a challenge to most designers. This thesis presents the design of a radiation-hardened, cold capable emitter coupled logic standard cell library with the intention of being used for space applications. The cells are designed and fabricated in a 90nm silicon germanium BiCMOS process. First, a review of emitter coupled logic is presented. Then, the design methodology …

An Isostable Coordinate Based Amelioration Strategy To Mitigate The Effects Of Jet Lag, Talha Ahmed

Masters Theses

Commercial air travel has become extremely commonplace in the last 20 to 30 years especially as the world has moved towards new heights of globalization. Though air travel has greatly reduced transit times allowing people to cover thousand of miles within hours, it comes with its fair share of issues. jet-lag can be regarded to be at the top of those list of problems; jet-lag typically results from rapid travel through multiple time zones which causes a significant misalignment between the person's internal circadian clock and the external time. A person's circadian clock is governed by a population of coupled …

Restorative Hand Therapy Exercise Using Iot-Based Flex Force Smart Glove, Yi Neng Chang, Mohamad Khairi Ishak, Khalid Ammar

Makara Journal of Technology

Stroke has long been a major health concern in Malaysia, with cerebrovascular disease accounting for one-third of all deaths. Patients who have had a stroke have varying degrees of movement impairment, which can be improved with physiotherapy. A smart glove system is proposed in this paper to measure and visualize patient finger flexes in real-time remotely and record these flexes for further analysis to monitor and assess patient physiotherapy sessions. The system is designed to help physiotherapists evaluate physiotherapy exercises of patients and provide detailed information regarding the rehabilitation process. This paper also includes performance analysis and data from physiotherapy …

Choice Of Instruments For Verification And Calibration Of Gas Analyzers, Ortigali Khakimov, Paraxat Mayliyevna Matyakubova, Mirolim Muhammad O'G'Li Maxmudjonov

Chemical Technology, Control and Management

This article analyzes the process of metrological control of gas analyzers and metrological requirements for them. The current state of the standards used in the state metrological control of gas analyzers and the results of the analyzes were studied. The task of choosing the measuring instruments used in the verification process and optimizing the requirements for them is set. An experimental verification process was organized in three groups using several measuring devices, and the reliability of the verification results was assessed. With the use of modern measuring instruments, a graph of the output value was built during the experimental verification …