Engineering Commons^™

Optimal Network Reconfiguration Based On Discrete Metaheuristic Techniques For Reduction Of Power Loss And Carbon Emission In Distribution Networks, Asad Ali, Hazlie Mokhlis, Nurulafiqah Nadzirah Mansor, Hussain Shareef, Hasmaini Mohamad, Munir Azam Muhammad

Turkish Journal of Electrical Engineering and Computer Sciences

Power distribution systems play a crucial role in transmitting electrical power from generation sources to end users. During transmission, significant power losses occur in the form of heat as the current flowing along the lines/cables has resistance. To minimize power losses, distribution network reconfiguration (DNR) has been widely adopted. This paper proposes optimal DNR based on metaheuristic techniques with discrete mutation feature targeting active power loss reduction, which subsequently lowers carbon emissions and operational costs. Through the discrete mutation feature, computational time to find optimal solution has been reduced significantly with fewer iterations compared to conventional mutation techniques. The proposed …

Quantifying And Integrating Community Hardship Into Two-Stage Stochastic Grid Reliability Optimization With Battery Storage, Fredrica Arthur

LSU Master's Theses

Traditional reliability planning for conventional distribution systems is largely utility-oriented, with a focus on collective system performance metrics like Expected Energy Not Supplied (EENS), where implicitly all unserved energy is considered of equal weight in terms of post-outage economic hardship. Yet, it is well understood that extended outage durations cause an uneven level of hardship to socioeconomically disadvantaged communities. This thesis proposes a community-informed reliability planning framework where the hardship caused by outages is explicitly considered in the battery energy storage system (BESS) location and sizing problem. First, a hardship-weighted Energy Not Supplied (WENS) measure is proposed, where income, education, …

Availability Model To Evaluate Ai Data Centers’ Role In Grid Stability, Troy Mcsimov, Trevor S. Kunz, Jeffrey Billo

SMU Data Science Review

The United States has made it clear; it is imperative that the US wins the global AI race. This paper focuses on one of the most challenging puzzle pieces surfaced at the POWER Data Center conference (San Antonio, Sept. 30.); for Electric Reliability Council of Texas (ERCOT) the limiting factor is not generation alone but the need to balance generation and load to preserve grid reliability.

The regulatory landscape fundamentally changed with the passage of Texas Senate Bill 6 in June 2025, which mandates new large loads must "contribute to the recovery of the interconnecting electric utility’s costs" (Texas Legislature, …

Reducing Range Anxiety Through Predictive Modeling Of Ev Battery Degradation, Caleb Thornsbury, Christian Castro, Bivin Sadler

SMU Data Science Review

Electric Vehicles (EV) range anxiety remains one of the top barriers for broader adoption. Range anxiety can be attributed to battery pack age and degradation over time. This paper plans to explore how to address this issue by creating a machine learning model that can predict degradation based on usage, temperature, battery chemistry, charging habits and exploring whether other factors tie into range degradation. This research will be using real world charging data along with lab tested chemistry data to build a model that can be chemistry specific for degradation. This paper will help perspective used-EV buyers learn about battery …

Characterizing Atmospheric Turbulence With The Lunar Step Response Method, Patrick D. Carattini, Caleb J. Stilp, Katelyn M. Atkinson, Stephen C. Cain

Faculty Publications

Most methods that astronomers use to characterize the strength of atmospheric turbulence in and around their observatories use differential image motion monitors observing a star to provide the necessary data for the measurement. With the Moon becoming a greater national priority, the need to characterize atmospheric paths between observatories on Earth and the Moon is potentially going to grow in the future. To this end, the differential image motion monitor is not an ideal instrument for characterizing turbulence along paths between observatories and the Moon as the bright Moon makes it difficult to detect and locate stars in its vicinity. …

Sensing Negative-Cone Rotational Diffusion Of Dipole-Like Emitters, Yuanxin Qiu, Kaizhi A. Nie, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Fluorescence anisotropy and single-molecule orientation-localization microscopy (SMOLM) are powerful techniques that quantify the rotational diffusion of dipole-like emitters, which is important for sensing molecular interactions and chemical environments at the nanoscale. Numerous theoretical and experimental studies have thoroughly characterized single-molecule rotations even when those rotations are much faster than the detector integration time. Here, we extend the theory of measuring rotational diffusion to situations where a single dipole rotates uniformly everywhere outside of an isotropic cone of a certain size, termed a negative cone. This scenario corresponds to negative fluorescence anisotropy 𝑟 and has been observed in emitters exhibiting strong …

Dynamic Deep Prompt Optimization For Defending Against Jailbreak Attacks On Llms, Doniyorkhon Obidov, Honggang Yu, Xiaolong Guo, Kaichen Yang

Michigan Tech Publications

Large Language Models (LLMs) demonstrate impressive capabilities across many applications but remain vulnerable to jailbreak attacks, which elicit harmful or unintended content. While model fine-tuning is an option for safety alignment, it is costly and prone to catastrophic forgetting. Prompt optimization has emerged as a promising alternative, yet existing prompt-based defenses typically rely on static modifications (e.g., fixed prefixes or suffixes) that cannot adapt to diverse and evolving attacks.

We propose Dynamic Deep Prompt Optimization (DDPO), the first jailbreak defense based on deep prompt optimization. DDPO uses the target LLM’s own intermediate layers as feature extractors to dynamically generate defensive …

Research Of Logic Elements Based On Complementary Bipolar Transistors, Nodira Batirdjanovna Alimova, Nilufar Baxtiyorovna Gulyamova

Chemical Technology, Control and Management

Important parameters for any type of inverter – a NOT logic gate – are the power consumption during switching and the supply voltage. The proposed connection of complementary (two different types) bipolar transistors reduces the current consumption and supply voltage by simultaneously using the cutoff and saturation modes of the bipolar transistors. It has been theoretically and experimentally established that an inverter using complementary bipolar transistors operates at low supply voltages, approximately 0.7 V. Power consumption is virtually independent of the inverter's static state. A method for calculating the transfer characteristic of an inverter using complementary bipolar transistors is developed, …

Algorithms Of Stable Adaptive Observation Of A Multidimensional Undefinite Object, Tursunova Sadoqat Abdusalom Qizi

Chemical Technology, Control and Management

This article presents an algorithm for simultaneously estimating the parameters and state coordinates of a multidimensional control object when some of its state variables are not directly measured. The inability to measure all state variables (coordinates) of an object is a well-known drawback of identification schemes. Such conditions require the construction of adaptive state observers. This work demonstrates that when identifying the parameters of a mathematical model for an uncertain multidimensional object, the asymptotic stability of the object and the convergence of its parameters to the model parameters are ensured, provided the input vector is sufficiently informative. The construction of …

Analysis Of The Carbonization Process Of Ammoniated Brine In Ammonia-Soda Production, Nadirbek Rustambekovich Yusupbekov, Djalolitdin Paxritdinovich Mukhitdinov, Fotima Faxritdinovna Iskhakova

Chemical Technology, Control and Management

The work provides an analytical review of the current state of modeling and controlling the carbonization process of ammoniated brine. It analyzes modern methods of mathematical, simulation, and intelligent modeling of heat and mass transfer, hydrodynamics, carbonation kinetics, and crystallization. The paper considers the potential of using digital twins, neural network models, fuzzy logic devices, and hybrid models to improve forecasting accuracy and the adaptability of process solutions. Modern carbonation process control strategies are also considered. A detailed analysis is provided of predictive control (MPC), neuro-fuzzy controllers, decentralized and multivariate control systems that ensure stable column operation under disturbances, optimize …

Analytical Method For Investigating Nonlinear Magnetic Circuits Of Measuring Transducers With A Standard Parameter Distribution Structure, Javhar Sulton O'G'Li Fayzullayev

Chemical Technology, Control and Management

The article proposes a new analytical method for investigating magnetic circuits with distributed parameters and nonlinear magnetic coupling. The method is based on introducing into the system of nonlinear differential equations of such circuits the condition that the second derivative of the magnetic flux with respect to the circuit length is equal to zero, as well as on assuming that one of the geometric parameters of the studied magnetic circuit – the value of the air gap between ferromagnetic cores, their thickness, width, or the linear value of the number of turns of the distributed excitation winding – is a …

Pid Control For Lower Limb Exoskeletons: A Framework Evaluation, Javlonbek Rakhmatillaev, Vytautas Bučinskas

Chemical Technology, Control and Management

This research provides a detailed guideline for implementing and evaluating Proportional Integral Derivative (PID) control frameworks in lower limb rehabilitation exoskeleton robotics. It examines the role of control systems within rehabilitation robotics, outlines the principles of PID control, describes exoskeleton architecture, explores applications of PID control, reviews optimization strategies, presents experimental validations, and considers future developments in the field. The proposed control framework incorporates aspects of mechanical design, actuator and sensor selection, and PID-based control algorithms, thereby promoting safe, accurate, and individualized rehabilitation support. Recommendations and effective guidance for future work are also presented.

Inductive Transducers For Measuring Vibrations, S.F. Amirov, A.Kh. Sulliev, A.A. Shoimkulov

Chemical Technology, Control and Management

A new design of an induction transducer has been developed for measuring linear and torsional vibrations in different directions with high sensitivity by constructing an inertial element consisting of four mutually perpendicular sectors and making the masses of two adjacent sectors different from the masses of the other two adjacent sectors. By constructing an inertial element in the form of a sector with two mutually diametric magnetic cores and different masses, and placing it between the horizontal and vertical axes, a design of an induction transducer has been developed that highly sensitively measures linear and torsional vibrations in different directions, …

The Main Errors Of The Ultrasonic Sensor In Measuring Water Flow In Open Channels, Anvar Urolovich Djalilov

Chemical Technology, Control and Management

This article analyzes the use of ultrasonic sensors in measuring water flow and the main errors that may occur in this process. In the conducted scientific research, a time-pulse ultrasonic sensor was tested. The absolute, relative and repeatability errors of the sensor during water flow measurement were studied. The absolute error represents the largest difference between the value recorded by the sensor and the real value, affecting the overall accuracy of the measurement system. This error can vary depending on environmental factors, the design and operating principles of the sensor. During the experiment, the performance of this sensor was …

Synthesis Of An Adaptive Synergistic Fuzzy Discrete Controller For Nonlinear Systems, Isamidin Xakimovich Sidikov, Gulruxsor Murot Qizi Nashvandova, Feruzakhon Botirxon Qizi Sodiqova

Chemical Technology, Control and Management

The paper considers the issues of synthesizing an adaptive fuzzy synergetic controller with discrete time for nonstationary nonlinear dynamic objects. The proposed approach is based on the integrated use of synergetic control principles and fuzzy logic methods, which ensure the formation of a control law for nonlinear dynamic objects that provides asymptotic stability of the control system. Such a hybrid combination makes it possible to guarantee the asymptotic stability of the closed-loop system and to shape the required dynamic behavior of the object over a wide range of operating modes. In addition, this approach provides the ability to adapt to …

Adaptive-Robust Control Of Dynamic Systems Using Generalized Predictive Methods, Shuxrat Tulyaganov

Chemical Technology, Control and Management

This paper considers an approach to adaptive-robust control of dynamic systems using generalized anticipation, where the object is described by a locally linearized model. Known self-tuning algorithms show insufficient stability to inaccurate selection of delay or model order. A generalized predictive control approach is suggested, with simulation outcomes showing superiority over traditional methods like generalized minimum variance control and pole assignment.This sliding horizon algorithm is based on predicting future system output signals several steps ahead, based on assumptions about subsequent control actions. One effective assumption is the presence of a “control horizon,” beyond which control signal increments are assumed to …

Review Of Modern Methods For Identification, Forecasting, And Intelligent Control Of Wastewater Biological Treatment Processes, Mirkhalil Agzamovich Ismailov, Boburbek Zokirjon O'G'Li Mannobjonov

Chemical Technology, Control and Management

This article presents a comprehensive review of contemporary approaches to the automation and intelligent control of wastewater biological treatment processes. Particular emphasis is placed on the digitalisation of wastewater treatment plants, ranging from the implementation of automated process control systems (APCS/SCADA-based solutions) to the application of predictive algorithms and the development of digital twins of bioreactors.

Special attention is devoted to mathematical models that underpin the control of bioprocesses. The evolution of the most widely used activated sludge models—ASM1, ASM2d, and ASM3—is examined, as these models describe key processes such as microbial community growth, nitrification, denitrification, and phosphorus removal. It …

Hybrid Cnn–Gru-Based Demand–Supply Forecasting To Enhance Sustainability In Renewable-Integrated Smart Grids, Süleyman Emre Eyimaya, Necmi Altin

Faculty Publications

The rapid integration of renewable energy sources in smart grids has introduced significant uncertainty in both power generation and consumption patterns, posing challenges to environmental, economic, and operational sustainability. Accurate short-term forecasting of energy demand and supply is essential for achieving optimal scheduling, grid stability, and resilient operation in renewable-integrated power systems. This study proposes a hybrid deep learning framework combining Convolutional Neural Networks (CNN) and Gated Recurrent Units (GRU) for intelligent joint demand–supply forecasting in smart grids. The model was developed and implemented in MATLAB using real-world datasets comprising electricity consumption, photovoltaic (PV) generation, temperature, and irradiance variables. Comparative …

Efficient Active Training For Deep Lidar Odometry, Beibei Zhou, Zhiyuan Zhang, Zhenbo Song, Jianhui Guo, Hui Kong

Research Collection School Of Computing and Information Systems

Robust and efficient deep LiDAR odometry models are crucial for accurate localization and 3D reconstruction, but typically require extensive and diverse training data to adapt to diverse environments, leading to inefficiencies. To tackle this, we introduce an active training framework designed to selectively extract training data from diverse environments, thereby reducing the training load and enhancing model generalization. Our framework is based on two key strategies: Initial Training Set Selection (ITSS) and Active Incremental Selection (AIS). ITSS begins by breaking down motion sequences from general weather into nodes and edges for detailed trajectory analysis, prioritizing diverse sequences to form a …

Orthogonal Time Frequency Space Modulation For Underwater Acoustic Communication Systems: A Review, Bevek Subba, Quoc Viet Phung, Stefan Lachowicz, Walid K. Hasan, Muhammad Haziq, Daryoush Habibi, Iftekhar Ahmad

Research outputs 2022 to 2026

Underwater Acoustic Communication (UAC) has garnered significant attention due to its applications in marine science, defence, and exploration. With the vast majority of the Earth's surface covered by water, there is a growing demand for reliable and effective communication techniques in underwater environments. However, the underwater acoustic channel is the most challenging channel due to its harsh characteristics, which significantly hinder the reliability and performance of UAC systems. Orthogonal Time Frequency Space (OTFS) modulation has emerged as a promising solution for next-generation UAC systems to address high Doppler and high mobility scenarios. It has demonstrated tolerance to fast time-varying channel …

Applying Two-Stage Risk-Based Market Structures For Energy Hub-Based Plug-In Electric Vehicles Using Information Decision Gap Theory And A Hybrid Recurrent Convolutional Network, A. Heidari, R. C. Bansal, R. Bo

Electrical and Computer Engineering Faculty Research & Creative Works

This paper investigates the optimal operation of an energy hub engaged in both day-ahead and real-time trading. A two-stage optimization framework Information Gap Decision Theory (IGDT) for day-ahead bidding and stochastic programming with Monte Carlo scenarios for real-time recourse is applied. Risk-neutral, risk-averse, and risk-taking strategies are considered to capture different risk preferences. The hub integrates combined heat and power, renewable energy, plug-in electric vehicles, and vehicle-to-grid and grid-to-vehicle technologies. Price and load forecasts are generated using a hybrid recurrent convolutional network (HRCN). Results highlight the trade-off between risk management and economic performance: costs are 16.5 % higher in the …

Portable Ice Cube Maker, Ayden Ziegler, Emiliano Hansen, Wyatt Engdahl, Dane Hansen

Mechanical Engineering

This Final Design Report outlines the senior design project undertaken by a team of mechanical engineering students at California Polytechnic State University, San Luis Obispo, for the development of a portable backpacking ice cube maker. The project aims to design, build, and test a lightweight, compact device that produces ice cubes for backpackers in remote outdoor environments. The goal is to create a functional prototype that is durable, user-friendly, and suitable for backcountry use. This document details background research, project objectives, and project plan, and current design status.

Microwave Dielectric Properties Of Geopolymer Precursor Powders, Linh T. Duong, Abu Naser Rashid Reza, Kristen M. Donnell, Christopher R. Shearer

Electrical and Computer Engineering Faculty Research & Creative Works

Geopolymers are sustainable structural materials with properties similar to ordinary Portland cement concrete. To better understand the fundamental reaction mechanisms of geopolymers, a microwave materials characterization approach is used. In this research work, the dielectric properties (permittivity and loss factor) of common precursor powders used to make geopolymers (GPPs)—fly ash, lime, metakaolin, silica fume, slag, and zeolite—are measured over the S- and X-band frequency ranges (i.e., 2.0–4.0 GHz and 8.2–12.4 GHz, respectively). The physical characteristics, elemental composition, mineralogical properties, and phase characterization of the GPPs are then correlated to dielectric properties. Permittivity of GPP, classified as pozzolanic or latent hydraulic, …

Sustainabake, Kevin Kunta Swanson Ii

Electrical Engineering

This senior project outlines the development of an oven that utilizes renewable energy to operate safely and effectively. It aims to test building an oven using mostly basic hardware students acquired during their time at Cal Poly and provide a starting point for those interested in creating a solar-powered oven. As our society continues to innovate and increasingly relies on electricity, it is important to place more emphasis on how we can make our lives sustainable to take care of our environment without introducing excessive pollutants. Food preparation is a daily activity that typically involves significant energy consumption, making this …

Mud Sound Speed Profile Constraints From Sub-Bottom Arrival Times, Charles W. Holland

Electrical and Computer Engineering Faculty Publications and Presentations

Arrival times of sub-bottom reflected paths together with co-located direct measurements of the angle of intromission provide narrow constraints on the sediment sound speed profile. Measurements of these two quantities at the central New England Mud Patch in March 2017 indicate that the average sound speed gradient in the upper 3m and upper 9m of mud is 6 s1. Gradients of 5 s1 and 7 s1 over the upper 9m are too small and large, respectively. Below 9m, the sandmud transition interval has a gradient of 200 s1. VC

Effects Of Asphalt Or Concrete On Dynamic Wireless Power Transfer, Yuou Peng, Daniela Wolter Ferreira Touma

Shelby Hall Graduate Research Forum Posters

Dynamic Wireless Power Transfer (DWPT) allows measurements should be done for 100 kHz and 77 kHz. electrical energy to be transferred wirelessly to a moving object, and it also possesses the ability to charge vehicles continuously while they are traveling down a specially equipped road.

A method of embedding the coils in the surface course shows that all coils achieve more than 54 kW of power at an efficiency of 95% in the power transmission evaluation. Advantage: Ability to charge vehicles continuously while they are traveling down a specially equipped road. Objective: Investigation of physical and structural feasibility of embedding …

Real-Time Simulation Analysis Of V2g Technique For Demand Response Using Survey Based Data Approach, Joseph Bentil

Shelby Hall Graduate Research Forum Posters

The demand of energy in the world concerning the power industry keeps growing even with the introduction of EVs. Traditional based demand response relies on load shedding and energy storage systems. However, EVs with their battery pack can serve as mobile energy storage systems for grid services.

Development of data-driven microgrid model using survey based vehicle data to evaluate V2G and demand side management strategies to improve grid services and test emerging artificial-based control algorithms.

State Of Charge Estimation Of Ev Secondary Battery Pack Using Hybrid Hedge Feedforward Feedback-Based Gated Recurrent Unit To Extend Lifespan, Md Ohirul Qays, Iftekhar Ahmad, Daryoush Habibi, Mohammad A.S. Masoum, Paul Moses

Research outputs 2022 to 2026

Accurate estimation of state of charge (SoC) and maintaining balanced charge levels across secondary battery cells are crucial in battery management systems (BMSs) to extend battery life while improving the performance and thermal stability of Li-ion batteries (LIBs) in electric vehicles (EVs). However, there are still underexplored challenges associated with circulating currents in electrochemical cells during continuous operation which can overheat battery packs, reducing their life span or result in dangerous thermal runaways. This paper investigates SoC estimation using various real-world charging and discharging profiles, along with charge-balancing strategies to enhance the longevity of parallel-connected Li-ion battery cells. A newly …

Addressing System Strength And Reliability Concerns In Renewable Energy-Based Weak Grids Using Synchronous Condensers Determined By Hybrid Gru-Classical Optimization Method, Md Ohirul Qays, Iftekhar Ahmad, Daryoush Habibi, Mohammad A.S. Masoum, Thair Mahmoud

Research outputs 2022 to 2026

Owing to the higher-integration of renewable energy generators (REGs), conventional coal-based synchronous generators are being decommissioned from generation fleets, resulting in system strength and reliability concerns. Along with the increasing load demand, deficiency of system strength can be a huge risk to system stability and can eventually lead to blackouts by disconnecting REGs from grid systems. In the literature, researchers and power engineers have proposed to deploy synchronous condensers (SynCons) as a mitigation strategy to address the system strength and reliability challenges. SynCons are, however, expensive and require investigation for higher reliability results before installation. To address the concerns, SynCons’ …

Demystifying Hardware Formal Verification For Undergraduate Education: A Risc-V Processor Case Study With Coursework Implementation, Riley A. Peters

Master's Theses

Hardware verification engineers apply formal methods to prove that a digital device always behaves according to its specification. This differs from traditional functional verification, in which engineers establish correctness by repeatedly sending test inputs to the device and comparing the outputs against a reference model. With the growing complexity of integrated circuits, the demand for digital verification engineers with formal methods experience has continued to increase. However, California Polytechnic State University: San Luis Obispo's current curriculum lacks dedicated material to prepare students for these roles.

This thesis seeks to address the lack of formal methods material through two efforts. First, …