Engineering Commons^™

Rekabentuk Perkakasan Khas Ecc (Reed-Solomon), Muhamad Mursid Noorizan

Student Works (2000-2009)

Dokumen ini disiapknn bagi menyediakan laporan tentang perjalanan projek perkakasan khas ECC yang dijalankan. Bahagian pertama dokumen ini terdapat pengenalan tentang projek. Bahagian kedua pula menyatakan tentang kajian yang telah dilakukan bagi memilih kod-kod pembetulan yang ingin dibangunkan. Seterusnya pada bahagian tiga, dinyatakan serba sedikit tentang bahasa yang digunakan dalam pembangunan projek iaitu VHDL. Sahagian keempat pula menceritakan tentang senibina-senibina dan rekabentuk-rekabentuk perkakasan khas. Dalam bahagian lima, dokumen menceritakan tentang fasa pembangunan yang telah dijalankan. Bahagian enam dan tujuh pula menceritakan tentang perbincangan dan kesimpulan daripada projek yang telah dijalankan.

Adaptive Notch Filter For Single And Multiple Narrow-Band Interference, Choy Chun Sin

Theses : Honours

In this project, the adaptive notch filter for single and Multiple narrow-band interference is implemented using simplified LMS algorithm. Performances of the LMS adaptive algorithms is evaluated and analysed through simulation on the computer using Matlab. The algorithm are then written in C programme and implemented using Texas Instrument Tool which consist of TMS320C54x EMV board and Code Composer Studio.

Pi And Pid Controller Tuning Rule Design For Processes With Delay, To Achieve Constant Gain And Phase Margins For All Values Of Delay, Aidan O'Dwyer

Conference papers

This paper will discuss the design of PI and PID controller tuning rules to compensate processes with delay, that are modelled in a number of ways. The rules allow the achievement of constant gain and phase margins as the delay varies.

Simulating Quasi-Ballistic Transport In Si Nanotransistors, Kausar Banoo, Jung-Hoon Rhew, Mark S. Lundstrom, Chi-Wang Shu, Joseph W. Jerome

Department of Electrical and Computer Engineering Faculty Publications

Electron transport in model Si nanotransistors is examined by numerical simulation using a hierarchy of simulation methods, from full Boltzmann, to hydrodynamic, energy transport, and drift-diffusion. The on-current of a MOSFET is shown to be limited by transport across a low-field region about one mean-free-path long and located at the beginning of the channel. Commonly used transport models based on simplified solutions of the Boltzmann equation are shown to fail under such conditions. The cause for this failure is related to the neglect of the carriers' drift energy and to the collision-dominated assumptions typically used in the development of simplified …

Uniform Random Number Generation Using Pseudorandom Binary Sequences, Susan Rea

Theses

Random numbers have conventionally been used in a range of applications such as numerical analysis, lotteries and computer simulation and as cryptographic keys. The algorithms used for the production of random numbers are termed pseudorandom, as the numbers produced are not truly random as they emanate from a deterministic periodic source that is they are predictable if a subset of the sequence is known. However, for most applications these pseudorandom number sources are entirely suitable.

For cryptographic key sources, however, the random number sequences must be statistically good and difficult to predict. Linear feedback shift registers are presented in this …

Simulation Study And Instability Of Adaptive Control, Zhongshan Wu

LSU Master's Theses

The Minimum-degree Pole Placement algorithm for Self-tuning Regulator design and the Recursive Least-square method and the projection algorithm for plant estimation are studied first in this thesis. Simulation studies for the estimator and controller algorithms are mainly undertaken after describing how to use MATLAB S-function in detail. Not only do Simulation experiments illustrates how and how well the MDPP and RLS algorithms work, but also show how to write and debug MATLAB codes for S-function programs. The robustness of the adaptive control system is intensively discussed subsequently. By using an estimator resistant to the noise contamination, the adaptive control system …

Keyboard - Smart Card Reader Controller Using Vhdl, Lani Mohd Zuwairi

Student Works (2000-2009)

As the time fly by the technology of computers has improves and much security is needed in every transaction of data that being done. In this project, designing a microcontroller for keyboard and smart card reader terminal integration is being done. At first stage, the architecture of the controller will analyze and studied. This will need some practice of knowledge in computer organization and architecture, as well as microprocessors architecture designs. Then the architecture is design using hardware prototyping. This is by using the VHSIC Hardware Description Language (VHDL). The codes done using the language then being simulate to get …

Development Of Object-Oriented Components For Atm Network Simulation With Emphasis On Congestion Control, Wai Kit Sin

Student Works (2000-2009)

Asynchronous Transfer Mode (ATM) is a very high-speed transmission technology. The barrage of technological advancements has continuously enhanced the network performance. There is an increasing dependence on the network. Thus, there is a need to accurately predict the impact of network and applications changes in the dynamic network environment. The network simulator is a tool to analyze the behavior of ATM networks without the expense of building a real network. The simulation of this simulator will give the results that imitate the real network environment. The aim of this project is to develop object-oriented components for an ATM Network Simulator …

Polarimetric Processing Of Coherent Random Noise Radar Data For Buried Object Detection, Yi Xu, Ram M. Narayanan, Xiojian Xu, John O. Curtis

Department of Electrical and Computer Engineering: Faculty Publications

Random noise polarimetry is a new radar technique for high-resolution probing of subsurface objects and interfaces. The University of Nebraska has developed a polarimetric random noise radar system based on the heterodyne correlation technique. Simulation studies and performance tests on the system confirm its ability to respond to phase differences in the received signals. In addition to polarimetric processing capability and the simplified system design, random noise radar also possesses other desirable features, such as immunity from radio frequency interference (RFI). The paper discusses the theoretical foundations of random noise polarimetry, and presents examples out of the entire data set …

Multimode Quantitative Scanning Microwave Microscopy Of In Situ Grown Epitaxial Ba1-XSrXTio3 Composition Spreads, K. S. Chang, M. Aronova, O. Famodu, I. Takeuchi, S. E. Lofland, Jason R. Hattrick-Simpers, H. Chang

Faculty Publications

We have performed variable-temperature multimode quantitative microwavemicroscopy of in situepitaxial Ba_1−xSr_xTiO₃ thin-film composition spreads fabricated on (100) LaA₁O₃ substrates. Dielectric properties were mapped as a function of continuously varying composition from BaTiO₃ to SrTiO₃. We have demonstrated nondestructive temperature-dependent dielectric characterization of local thin-film regions. Measurements are simultaneously taken at multiple resonant frequencies of the microscope cavity. The multimode measurements allow frequency dispersion studies. We observe strong composition-dependent dielectric relaxation in Ba_1−xSr_xTiO₃ at microwave frequencies.

Isolated Ramp Metering Feedback Control Utilizing Mixed Sensitivity For Desired Mainline Density And The Ramp Queues, Pushkin Kachroo, Kaan Ozbay, Donald E. Grove

Electrical & Computer Engineering Faculty Research

This paper presents a feedback control design for isolated ramp metering control. This feedback control design, unlike the existing isolated feedback ramp controllers, also takes into account the ramp queue length. Using a nonlinear H∞ control design methodology, we formulate the problem in the desired setting to be able to utilize the results of the methodology.

Modeling, Fabrication, And Optimization Of Niobium Cavities: Phase I, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells and buffered chemical polishing produce good performance. The objective of the proposed research is to maximize the performance of the niobium cavities through studying multipacting, studying the effect of chemical etching on the surface roughness, and redesigning the cavities.

The US Congress has recently authorized exploring an alternative way to deal with spent nuclear fuel: Accelerator Transmuting of Waste (ATW). In this approach, a particle accelerator produces protons that react with …

Accurate Parameter Estimation For An Articulatory Speech Synthesizer With An Improved Neural Network Mapping, Hali̇s Altun, Tankut Yalçinöz, K. Mervyn Curtis

Turkish Journal of Electrical Engineering and Computer Sciences

Neural network (NN) applications have recently been employed to extract the parameters of an articulatory speech synthesizer from a given speech signal. Results from these attempts showed that a single NN is insufficient to cover all of the possible configurations uniquely. Moreover, apart from their computational advantages, NN mapping is so far not superior to the other mapping techniques [1]. Thus there is a clear need to improve NN solution to the inverse problem. Results from our earlier experiments with an articulatory speech synthesizer have shown that the statistical characteristic of the articulatory target pattern vectors can be exploited for …

Scalar Wave Diffraction By A Perfectly Soft Infinitely Thin Circular Ring, Fati̇h Di̇kmen, Ertuğrul Karaçuha, Yury Alexanderovich Tuchkin

Turkish Journal of Electrical Engineering and Computer Sciences

A new strong mathematically rigorous and numerically effective method for solving the boundary value problem of scalar (for example acoustic) wave diffraction by a perfectly soft (Dirichlet boundary condition) infinitely thin circular ring is proposed. The method is based on the combination of the Orthogonal Polynomials Approach, and on the ideas of the methods of analytical regularization. As a result of the suggested regularization procedure, the initial boundary value problem is equivalently reduced to the infinite system of the linear algebraic equations of the second kind, i.e., to an equation of the type ( (I + H) x = b …

Regularity And Symmetry As A Base For Efficient Realization Of Reversible Logic Circuits, Marek Perkowski, Pawel Kerntopf, Andrzej Buller, Malgorzata Chrzanowska-Jeske, Alan Mishchenko, Xiaoyu Song, Anas Al-Rabadi, Lech Jozwiak, Alan Coppola

Electrical and Computer Engineering Faculty Publications and Presentations

We introduce a Reversible Programmable Gate Array (RPGA) based on regular structure to realize binary functions in reversible logic. This structure, called a 2 * 2 Net Structure, allows for more efficient realization of symmetric functions than the methods shown by previous authors. In addition, it realizes many non-symmetric functions even without variable repetition. Our synthesis method to RPGAs allows to realize arbitrary symmetric function in a completely regular structure of reversible gates with smaller “garbage” than the previously presented papers. Because every Boolean function is symmetrizable by repeating input variables, our method is applicable to arbitrary multi-input, multi-output Boolean …

Dynamic Bandwidth Allocation Using Neural-Fuzzy In Atm Network, Yan Sing Chua

Student Works (2000-2009)

Dynamic bandwidth allocation is becoming one of the crucial issues in the design and research in the computer network. This is due to the continuous increasing demand of intensive applications that require more bandwidth while retaining higher quality. Dynamic bandwidth allocation utilises the current network state information to optimise the bandwidth distribution. The state information can be gathered through prediction using past data and measurement on current state. Agility and flexibility of dynamic bandwidth allocation using Neural-Fuzzy has the advantage that it can adapt to the state changes of the network. ATM network carries heterogeneous traffic and this causes the …

Diamondlike Carbon Thin Film Deposition Using A Rf Planar Coil Inductively Coupled Plasma System, Wai Soon Liew

Student Works (2000-2009)

A RF planar coil inductively coupled plasma system (ICPs) is setup for this project. The system is powered by a 13.56MHz, 550W, 500 RF generator. The RF power is transferred to the plasma via a planar induction coil. The impedance matching circuit consists of an air-core step-down transformer and a tunable vacuum capacitor. The typical E-H mode transition which is distinctive to the ICP has been observed in argon plasma, hydrogen plasma and hydrogen-methane admixture plasma. The studies carried out include the observation of intensity of light emission from the plasma, the power transferred at different pressures, the concentration of …

Effects Of Argon Dilution Of Silane On The Optical Properties And Surface Morphology Of Hydrogenated Amorphous Silicon, Choon Kheam Lim

Student Works (2000-2009)

Hydrogenated amorphous silicon (a.Si:H) was prepared using the d.c plasma grow discharge system. Two sets of samples were prepared and studied. The first set of samples referred to as the high argon dilution films were prepared from the discharge of pure silane at flow-rate of 5sccm and silane at the same flow-rate diluted in argon at flow-rates of 5, 10 and 15sccm. Similarly, the second set of sample referred to as the low argon dilution films were prepared from the discharge of pure silane at flow-rate of20sccm and silane at the same flow-rate diluted in argon at the flow-rates mentioned …

Fabrication And Application Of Fiber Bragg Grating, Wadi Harun Sulaiman

Student Works (2000-2009)

This dissertation presents the fabrication, characterization and application of short period fiber Bragg grating (FBG). The FBG is inscribed on high germania boron co-doped optical fiber by phase mask method with a 244nm continuous wave frequency doubled Argon ion laser as a laser source. The FBGs with reflectivity ranging from 98 -99.9%, bandwidth of 0.3 ~ 0.9nm and center wavelength of 1552.5 - 1553.5nm have been fabricated successfully with this method. The time taken for these inscriptions are within 10 to 30 minutes depending on alignment. The fabricated FBGs are characterized using both fiber amplifier (broadband source) and tunable laser …

Dynamic Performance Of Isolated Power Converters, David Badia

Theses

Isolated power converters are primarily used in applications where electrical galvanic isolation is required for safety purposes. They are also used in applications, which require various output voltages level. They have been studied from many different aspects, but in this thesis the fundamental circuits of the flyback, the forward and the half-bridge converters are studied and compared extensively, with regard to their dynamic performance.

This analysis will lead us to a better understanding of their behaviour, that is a crucial point in the selection of each topology for a particular application. Moreover, the dynamic response of each converter is different; …

An Efficient Instruction Cache Scheme For Object-Oriented Languages, Yul Chu, M. R. Ito

Electrical and Computer Engineering Faculty Publications

We present an efficient cache scheme, which can considerably reduce instruction cache misses caused by procedure call/returns. This scheme employs N-way banks and XOR mapping functions. The main function of this scheme is to place a group of instructions separated by a call instruction into a bank according to the initial and final bank selection mechanisms. After the initial bank selection mechanism selects a bank on an instruction cache miss, the final bank selection mechanism will determine the final bank for updating a cache line as a correction mechanism. These two mechanisms can guarantee that recent groups of instructions exist …

Power Quality, Badrul H. Chowdhury

Electrical and Computer Engineering Faculty Research & Creative Works

One big reason for the poor power quality incidents experienced today is the proliferation of electronic devices. A voracious appetite for higher efficiency and productivity in the manufacturing sector, comfort and automation in homes, and efficient lighting systems in commercial installations are driving the market for power electronic devices. At the forefront of this explosion is the switched power supply. Compared to its predecessor-the linear power supply-it can convert higher power much more efficiently and with a significantly smaller footprint. The switched power supply is found in most of today''s computers, fax machines, laser printers, office copiers, etc.

Analysis Of A Four-Level Dc/Dc Buck Converter, Keith Corzine, J. Yuen, J. R. Baker

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a four-level DC/DC buck converter is introduced. The primary application for this converter is to regulate the center capacitor voltage in a four-level inverter system. The steady-state and average-value models for the proposed converter are developed and compared in simulation. The converter was constructed in the laboratory and verified on a four-level motor drive system. It was shown that the four-level DC/DC converter provides capacitor voltage balancing and allows higher output voltage utilization from the inverter.

Ensemble Monte Carlo Based Simulation Analysis Of Gan Hemts For High-Power Microwave Device Applications, Tao Li

Electrical & Computer Engineering Theses & Dissertations

The high electron mobility transistors (HEMTs) fabricated using wide-bandgap semiconductors show promise as high-gain, low-noise devices with superior frequency response. The structure and operation principle of HEMT are first briefly discussed. The distinguishing and unique properties of GaN are reviewed and compared with those of GaAs. Calculations of the electronic mobility and drift velocity have been carried out for bulk GaN based on a Monte Carlo approach, which serves as a validity check for the simulation model.

By taking account of polarization effects, degeneracy and interface roughness scattering, important microwave performance measures such as the dynamic range, harmonic distortion and …

Characterization Of The Biological Activities Of Recombinant Fusion Protein Green Fluorescent Protein/Human Zona Pellucida Protein 3 (Gfp/Hzp3), Zhiyong Lin

Theses and Dissertations in Biomedical Sciences

Despite numerous reports indicating the successful production of bioactive recombinant ZP3, no report has shown the rhZP3 having direct binding activity with human sperm. Recombinant ZP3 generated from our previous study displayed binding activity with human sperm through indirect evidence from hemizona assay (HZA).

This present study focused on the production of recombinant ZP3 with direct binding activity with human sperm. Through the application of a pEGFP expression vector, fusion protein GFP/ZP3 was successfully generated and expressed. The expression of GFP/ZP3 was evidenced by RT-PCR and western blot. The fusion protein was partially purified by Ni-NTA affinity column from cell …

Impact-Ionization And Noise Characteristics Of Thin Iii-V Avalanche Photodiodes, Mohammad A. Saleh, Majeed M. Hayat, Paul P. Sotirelis, Archie L. Holmes, Joe C. Campbell, Bahaa E.A. Saleh, Malvin Carl Teich

Electrical and Computer Engineering Faculty Research and Publications

It is, by now, well known that McIntyre's localized carrier-multiplication theory cannot explain the suppression of excess noise factor observed in avalanche photodiodes (APDs) that make use of thin multiplication regions. We demonstrate that a carrier multiplication model that incorporates the effects of dead space, as developed earlier by Hayat et al. provides excellent agreement with the impact-ionization and noise characteristics of thin InP, In/sub 0.52/Al/sub 0.48/As, GaAs, and Al/sub 0.2/Ga/sub 0.8/As APDs, with multiplication regions of different widths. We outline a general technique that facilitates the calculation of ionization coefficients for carriers that have traveled a distance exceeding the …

Breakdown Voltage In Thin Iii-V Avalanche Photodiodes, Mohammad A. Saleh

Electrical and Computer Engineering Faculty Research and Publications

1. The dead-space multiplication theory of Hayat et al. [Journal of Lightwave Technology 10, 1415 (1992)], in conjunction with the multiplication-width-independent ionization-coefficient model developed by Saleh et al. [IEEE Trans. Electron Devices 47, 625 (2000)], are shown to accurately predict breakdown voltages for thin avalanche photodiodes of GaAs, InP, In_0:52Al_0:48As, and Al_0:2Ga_0:8As, over a broad range of device widths. The breakdown voltage is determined from the analytical expression for the impulse-response-function decay rate.

A Wideband Monopole For Reconfigurable Multiband Radio Terminals, Max Ammann

Conference papers

A wideband planar monopole employing two broadbanding techniques is investigated, and is shown to yield an impedance bandwidth ratio of 10:1 or greater for a return loss of 8 dB. The radiation pattern bandwidth is also investigated

Sharing Health-Care Records Over The Internet, Jane Grimson, Gaye Stephens, Benjamin Jung, William Grimson, Damon Berry, Sebastien Pardon

Articles

Presents a novel approach to sharing electronic health-care records that leverages the Internet and the World Wide Web, developed as part of two European Commission-funded projects, Synapses and SynEx. The approach provides an integrated view of patient data from heterogeneous, distributed information systems and presents it to users electronically. Synapses and SynEx illustrate a generic approach in applying Internet technologies for viewing shared records, integrated with existing health computing environments. Prototypes have been validated in a variety of clinical domains and health-care settings

The Design And Analysis Of An Analog Ratio Spectrum Circuit, Liping Deng, John G. Harris

Electrical and Computer Engineering Faculty Research & Creative Works

The ratio spectrum (RS) is a novel method for signal analysis that has been successfully demonstrated for speech recognition and coding applications. In this paper, an improved RS circuit with an adaptive tenth-order Butterworth low-pass filter has been designed. We also present the first convergence analysis of the ratio spectrum. We derive linearized convergence expressions for the RS and compare the theoretical predictions to circuit simulations. © 2001 IEEE.