Engineering Commons^™

Implementing An Integrated Signaling And Power Distribution Control System For Remotely Located Devices, Andrew Stephen Hintz

Graduate Theses - Electrical and Computer Engineering

A system was designed and implemented that combined the distribution of high-current power with a digital control signal over a common conductor. Two different versions of this system were implemented. Initially, a design based on of commercially available parts was created and tested to prove that the concept of combining communications and power is valid. The resulting design was then miniaturized to show that the system might be combined onto a single integrated circuit. In the miniaturization process, some circuit blocks were redesigned to take advantage of the flexibility provided by ASIC designs. Both the proof of concept and the …

Method And Apparatus For Modulating Digital Data, Jack Glas, Vladimir I. Prodanov, Maurice Tarsia

Electrical Engineering

The modulator includes an oscillator generating signals, each having a different phase, and a selector receiving digital data. When the digital data received by the selector changes logic state, the selector supplies a first and second plurality of signals generated by the oscillator to first and second non-linear amplifiers, respectively. An adder then adds the output of each amplifier to generate a radio frequency output.

Real-Time Image Analysis Of Living Cellular-Biology Measurements Of Intelligent Chemistry, J.C. Solinsky, Scott E. Budge, P.D. Majors, B. Rex

Electrical and Computer Engineering Faculty Publications

This paper reports on the Pacific Northwest National Laboratory (PNNL) DOE Initiative in Image Science and Technology (ISAT) research, which is developing algorithms and software tool sets for remote sensing and biological applications. In particular, the PNNL ISAT work is applying these research results to the automated analysis of real-time cellular biology imagery to assist the biologist in determining the correct data collection region for the current state of a conglomerate of living cells in three-dimensional motion. The real-time computation of the typical 120 MB/sec multi-spectral data sets is executed in a Field Programmable Gate Array (FPGA) technology, which has …

Function-Driven Linearly Independent Expansions Of Boolean Functions And Their Application To Synthesis Of Reversible Circuits, Pawel Kerntopf, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

The paper presents a family of new expansions of Boolean functions called Function-driven Linearly Independent (fLI) expansions. On the basis of this expansion a new kind of a canonical representation of Boolean functions is constructed: Function-driven Linearly Independent Binary Decision Diagrams (fLIBDDs). They generalize both Function-driven Shannon Binary Decision Diagrams (fShBDDs) and Linearly Independent Binary Decision Diagram (LIBDDs). The diagrams introduced in the paper, can provide significantly smaller representations of Boolean functions than standard Ordered Binary Decision Diagrams (OBDDs), Ordered Functional Decision Diagrams (OFDDs) and Ordered (Pseudo-) Kronecker Functional Decision Diagrams (OKFDDs) and can be applied to synthesis of reversible …

Optimal Beam Splitters For The Division-Of-Amplitude Photopolarimeter, R. M.A. Azzam, A. De

Electrical Engineering Faculty Publications

Optimal optical parameters of the beam splitter that is used in the division-of-amplitude photopolarimeter are determined. These are (1) 50%–50% split ratio of the all-dielectric beam splitter, (2) differential phase shifts in reflection and transmission Δ_r and Δ_t that differ by ±π/2, and (3) ellipsometric parameters (ψ_r, ψ_t)= (27.368°, 62.632°) or (62.632°, 27.368°). It is also shown that for any nonabsorbing beam splitter that splits incident unpolarized light equally, the relationship ψ_r+ψ_t=π/2 is always satisfied.

Rapid Prototyping Of Digital Controls For Power Electronics, Antonello Monti, Enrico Santi, Roger A. Dougal, Marco Riva

Faculty Publications

The process for designing digital controls for power electronics is typically quite convoluted and affords many opportunities for errors to occur. We present here a new and complete, method for rapid prototyping of digital controls that allows rapid realization of new designs. The approach uses a collection of tools that include both software (the virtual test bed (VTB) and Matlab/Simulink) and hardware (dSpace DSP). An example application of the methodology completes the discussion.

Coding, Decoding, And Recovery Of Clock Synchronization In Digital Multiplexing System, Hansheng Wang, Xiaoyi Qin, Lieguang Zeng, Fuqin Xiong

Electrical and Computer Engineering Faculty Publications

High-speed broadband digital communication networks rely on digital multiplexing technology where clock synchronization, including processing, transmission, and recovery of the clock, is the critical technique. This paper interprets the process of clock synchronization in multiplexing systems as quantizing and coding the information of clock synchronization, interprets clock justification as timing sigma-delta modulation (TΔ-ΣM), and interprets the jitter of justification as quantization error. As a result, decreasing the quantization error is equivalent to decreasing the jitter of justification. Using this theory, the paper studies the existing jitter-reducing techniques in transmitters and receivers, presents some techniques that can decrease the quantization error …

Isomorphic Strategy For Processor Allocation In K-Ary N-Cube Systems, Moonsoo Kang, Chansu Yu, Hee Yong Youn, Ben Lee, Myungchul Kim

Electrical and Computer Engineering Faculty Publications

Due to its topological generality and flexibility, the k-ary n-cube architecture has been actively researched for various applications. However, the processor allocation problem has not been adequately addressed for the k-ary n-cube architecture, even though it has been studied extensively for hypercubes and meshes. The earlier k-ary n-cube allocation schemes based on conventional slice partitioning suffer from internal fragmentation of processors. In contrast, algorithms based on job-based partitioning alleviate the fragmentation problem but require higher time complexity. This paper proposes a new allocation scheme based on isomorphic partitioning, where the processor space is partitioned into higher dimensional isomorphic subcubes. The …

Cellular Automata Realization Of Regular Logic, Andrzej Buller, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

This paper presents a cellular-automatic model of a reversible regular structure called Davio lattice. Regular circuits are investigated because of the requirement of future (nano-) technologies where long wires should be avoided. Reversibility is a valuable feature because it means much lower energy dissipation. A circuit is reversible if the number of its inputs equals the number of its outputs and there is a one-to-one mapping between spaces of input vectors and output vectors. It is believed that one day regular reversible structures will be implemented as nanoscale 3-dimensional chips. This paper introduces the notion of the Toffoli gate and …

Spatial And Temporal Considerations In Vehicle Path Tracking With An Emphasis On Spatial Robustness, Donald L. Cripps

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This dissertation researches the task and path management of an autonomous vehicle with Ackerman-type steering.

The task management problem was approached as a path training operation in which a human operator drives the desired path through an environment. A training trajectory is converted into a series of path segments that are driveable by the autonomous vehicle by first fitting a general path to the dataset. Next, transition segments are added to the general path to match the vehicle velocity and steering angle rate limit.

The path management problem has been approached by first deriving a kine- matic model of the …

Calculation Of The Impedance Of A Rectangular Waveguide Aperture In The Presence Of A Loaded Dipole Antenna Embedded In A Generally Lossy Material, Dana M. Hughes, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

The use of a combined embedded modulated scattering technique, utilizing a PIN diode-loaded dipole probe, and near-field microwave nondestructive testing technique, utilizing an open-ended rectangular waveguide, has been investigated as a means for determining the complex dielectric constant in which the MST probe is embedded. For this, the formulation of the forward problem of calculating the modulated reflection coefficient, measured at the aperture of the waveguide, is presented here, This formulation is based upon the reciprocity theorem for two antennae, and utilizes the near-field radiation pattern of a rectangular waveguide aperture and current distribution along the length of a dipole …

Foreword Advanced Emc Numerical Modeling, Christos Christopoulos, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

A Dual-Current Method For Characterizing Common-Mode Loop Impedance, Geping Liu, Yimin Ding, Chingchi Chen, Richard W. Kautz, James L. Drewniak, David Pommerenke, Marina Koledintseva

Electrical and Computer Engineering Faculty Research & Creative Works

The definition of common-mode loop impedance is proposed instead of the ambiguous definition of common-mode impedance. Moreover, a non-invasive measurement method to characterize the common-mode loop impedance using dual clamp-on current probe is presented herein. The frequency responses of the current probes are de-embedded through a calibration procedure. Independent direct measurements using a network analyzer corroborate the validity of the Dual-Current-Probe Method.

A Study On Influence Of Guard Band On Common-Mode Current Related To A Microstrip Line, Yoshiki Kayano, Motoshi Tanaka, James L. Drewniak, Hiroshi Inoue

Electrical and Computer Engineering Faculty Research & Creative Works

Influence of guard band on common-mode (CM) current related to a microstrip line (trace) has been studied experimental and FDTD simulation. As the guard band, copper tape is connected along the entire edge of the ground plane. It is cleared that a guard band parallel to and near a trace is most effective in suppressing the CM current. An empirical formula to quantify the relationship between the position of a trace and CM current of the case with a guard band is proposed. Calculated results using the empirical formula and FDTD modeling are in good agreement, which indicates this empirical …

Lumped-Circuit Model Extraction For Vias In Multilayer Substrates, Jun Fan, James L. Drewniak, James L. Knighten

Electrical and Computer Engineering Faculty Research & Creative Works

Via interconnects in multilayer substrates, such as chip scale packaging, ball grid arrays, multichip modules, and printed circuit boards (PCB) can critically impact system performance. Lumped-circuit models for vias are usually established from their geometries to better understand the physics. This paper presents a procedure to extract these element values from a partial element equivalent circuit type method, denoted by CEMPIE. With a known physics-based circuit prototype, this approach calculates the element values from an extensive circuit net extracted by the CEMPIE method. Via inductances in a PCB power bus, including mutual inductances if multiple vias are present, are extracted …

Microwave Reflection Properties Of Concrete Exposed Periodically To Chloride Solution Of 3% Salinity And Compression Force, Joseph Toby Case, Eric Gallaher, Shanup Peer, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

Microwave nondestructive evaluation (NDE) techniques applied to mortar have proven successful in the past for detecting mixture constitutes, salt ingress, loading and cure state monitoring. In this paper, a similar microwave NDE technique is used to evaluate reflection properties of concrete for cyclical exposure to salt ingress and loading at S-(2.6-3.95 GHz) and X-(8.2-12.4GHz) microwave frequency bands. Four identical cubic specimens were prepared: one soaked in distilled water, one soaked in a 3%-salt solution, one soaked in a 3%-salt solution and loaded and finally one that was neither soaked nor loaded. Using both magnitude and phase of microwave reflection coefficient, …

Electromagnetic Modeling Of Saltwater Ingress In Mortar At Microwave Frequencies, Shanup Peer, R. Zoughi, K. E. Kurtis

Electrical and Computer Engineering Faculty Research & Creative Works

Corrosion of reinforcing steel is a major cause of damage and deterioration in reinforced concrete structures. Therefore, as the presence of a sufficient concentration of chloride ions can lead to the onset of corrosion in embedded steel, it is of utmost importance to be able to determine the free salt content and its distribution in these materials. Moreover, it is important to obtain this information nondestructively. Previous investigations have shown the capability of near-field microwave nondestructive evaluation methods, using open-ended rectangular waveguide probes, to evaluate many important properties of cement-based materials. In this Investigation, the temporal microwave reflection properties of …

Metrics And Models For Cost And Quality Of Component-Based Software, Sahra Sedigh, Arif Ghafoor, Raymond A. Paul

Electrical and Computer Engineering Faculty Research & Creative Works

Quality and risk concerns currently limit the application of commercial off-the-shelf (COTS) software components to non-critical applications. Software metrics can quantify factors contributing to the overall quality of a component-based system, and models for tradeoffs between cost and various aspects of quality can guide quality and risk management by identifying and eliminating sources of risk. This paper discusses metrics and models that can be used to alleviate quality concerns for COTS-based systems, enabling the use of COTS components in a broader range of applications.

Comparison Of Water And Saltwater Movement In Mortar Based On A Semi-Empirical Electromagnetic Model, Shanup Peer, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

The presence of chloride ions in steel-reinforced structures leads to the corrosion of the reinforcement thus compromising the integrity and strength of the structure. Thus, it is of great importance to be able to non-destructively detect and evaluate the free chloride content in concrete. To that end, an investigation was initiated where two mortar cubes were soaked in distilled water and saltwater solutions, respectively. Their temporal microwave reflection properties were measured using open-ended rectangular waveguides on a daily basis for three cycles, each lasting 35 days. A semi-empirical electromagnetic model was then developed to simulate the reflection properties of the …

Dc Power-Bus Noise Isolation With Power-Plane Segmentation, Wei Cui, Jun Fan, Yong Ren, Hao Shi, James L. Drewniak, Richard E. Dubroff

Electrical and Computer Engineering Faculty Research & Creative Works

Power-plane segmentation is often used for DC power-bus noise isolation in multilayer printed circuit board (PCB) designs. To achieve a desirable noise isolation, different power-plane segmentations can be used. A suitable modeling approach, as well as measurements, were employed in this work to study the noise isolation with several power-plane segmentation designs. The geometries studied include power islands, and totally segmented power planes. The effects of the power-bus noise isolation with different types of power island connections, locations of segmentation, and shapes were analyzed, and compared. The modeled and measured results show that suitable power-plane segmentation can result in significant …

A Local Search Optimization Algorithm Based On Natural Principles Of Gravitation, Barry Webster, Philip J. Bernhard

Electrical Engineering and Computer Science Faculty Publications

This paper discusses the concept of an algorithm designed to locate the optimal solution to a problem in a (presumably) very large solution space. The algorithm attempts to locate the optimal solution to the problem by beginning a search at an arbitrary point in the solution space and then searching in the "local" area around the start point to find better solutions. The algorithm completes either when it locates what it thinks is the optimal solution or when predefined halt conditions have been met. The algorithm is repair-based, that is, it begins with a given solution and attempts to "repair" …

Classification Of Radar Targets Using Invariant Features, Gregory J. Meyer

Theses and Dissertations

Automatic target recognition ATR using radar commonly relies on modeling a target as a collection of point scattering centers, Features extracted from these scattering centers for input to a target classifier may be constructed that are invariant to translation and rotation, i.e., they are independent of the position and aspect angle of the target in the radar scene. Here an iterative approach for building effective scattering center models is developed, and the shape space of these models is investigated. Experimental results are obtained for three-dimensional scattering centers compressed to nineteen-dimensional feature sets, each consisting of the singular values of the …

Assessing Classification Confidence Using A Weighted Exponential Based Technique With The Learn++ Incremental Learning Algorithm, Jeffrey T. Byorick

Theses and Dissertations

Pattern recognition problems span a broad range of applications, where each application has its own tolerance on classification error. The varying levels of risk associated with many pattern recognition applications indicate the need for a versatile algorithm with the ability to measure its own reliability. In this work, the supervised incremental learning algorithm Learn++ [1, 2], which exploits the synergistic power of an ensemble of classifiers, is further developed to add the capability of assessing its own confidence. Estimation of the true generalization performance of the classifier as well as the confidences on classification of individual data instances is investigated …

Wide Angle Achromatic Prism Beam Steering For Infrared Countermeasures Applications, Bradley D. Duncan, Philip J. Bos, Vassili Sergan

Electro-Optics and Photonics Faculty Publications

The design and analysis of achromatic doublet prisms for use in laser beam steering is presented. The geometric relationships describing the maximum steering angle are given, as are discussions of first- and second-order dispersion reduction. Infrared (IR) material alternatives and optimum IR material characteristics for wide-angle achromatic prism beam steering are also investigated. Sixteen materials in 120 different combinations have been examined to date. For midwave IR applications it is shown that the minimum dispersion currently achievable across the full 2 to 5 μm spectrum is 1.7816 mrad at an average maximum steering angle of 45 deg. This is accomplished …

Complex Low-Pass Filters, Peter Kiss, Vladimir I. Prodanov, Jack Glas

Electrical Engineering

Zero-if transceivers suffer from the imbalance of the I and Q paths. By using a complex low-pass filter topology instead of a conventional pair of real low-pass filters, this imperfection can be reduced. Both analytical and numerical analysis show that the proposed technique is significantly more robust to circuit imperfections than the traditional architecture.

Denoising Using Higher-Order Statistics, Samuel Peter Kozaitis, Sunghee Kim

Electrical Engineering and Computer Science Faculty Publications

We used a higher-order correlation-based method for signal denoising. In our approach, we determined which wavelet coefficients contained mostly noise, or signal, based on higher-order statistics. Because the higher that second-order moments of the Gaussian probability function are zero, the third-order correlation coefficient will not have a statistical contribution from Gaussian noise. We obtained results for both 1-D signals and images. In all cases, our approach showed improved results when compared to a more popular denoising method.

Understanding Wavelet Analysis And Filters For Engineering Applications, Chethan Bangalore Parameswariah

Doctoral Dissertations

Wavelets are signal-processing tools that have been of interest due to their characteristics and properties. Clear understanding of wavelets and their properties are a key to successful applications. Many theoretical and application-oriented papers have been written. Yet the choice of a right wavelet for a given application is an ongoing quest that has not been satisfactorily answered. This research has successfully identified certain issues, and an effort has been made to provide an understanding of wavelets by studying the wavelet filters in terms of their pole-zero and magnitude-phase characteristics. The magnitude characteristics of these filters have flat responses in both …

A Representation Scheme For Finite Length Strings, Guarav Tandon, Debasis Mitra

Electrical Engineering and Computer Science Faculty Publications

This study is an attempt to create a canonical representation scheme for finite length strings to simplify the study of the theory behind different classes of patterns and to ease the understanding of the underlying separability issues. This could then be used to determine what kinds of techniques are suitable for what class of separability (linear, multi-linear, or non-linear). This representation can then be used in intrusion detection, biological sequences, pattern recognition/classification and numerous other applications.

Development And Analysis Of Geographic Information System For Electricity Network (Case Study: Surabaya Industrial Estate Rungkut In Surabaya)., Lilik Jamilatul Awalin, Bangun Muljo Sukojo

Makara Journal of Technology

Development and Analysis of Geographic Information System for Electricity Network (Case Study: Surabaya Industrial Estate Rungkut in Surabaya). Geographic Information System (GIS) is a system of data which has spatial base. This may be cause has ability to process and analysis data quickly. The ability of GIS will be able to process the alternative in decision making. The need of electric power grows until recent time along with the existence of industrial sector expansion and land use expansion claim better service, large and balance stock of electric power. GIS is a solution for planning and managing data base system, for …

Application Of Remote Sensing And Geographic Information System Methods For Land Using Difference, Bangun Muljo Sukojo, Diah Susilowati

Makara Journal of Technology

Application of Remote Sensing and Geographic Information System Methods for Land Using Difference. Land using difference analysis has been done using remote sensing and Geographic Information System (GIS) methods. Identification of land using difference was conducted using map overlaying process of 1990s (digitized scalling 1:50.000) and 1997s land using map (interpreted from Landsat TM (Thematic Mapper) Image 1997) with UTM (Universal Transverse Mercator) coordinate. Image enhancement was done through histogram equalization with supervised classification devided into 7 classes: rice field, settlement, dry field, industry, pond, sport field and bush. Land using difference and river pollution BOD (Biological Oxygen Demand), COD …