Engineering Commons^™

Behavior Analysis Of Simple And Complex Workloads, Davi D. Dantas

Honors Undergraduate Theses

Complex tasks have evolved rapidly in recent times due to tremendous advancements in computational power and data availability. With the ever-increasing presence of complex applications, this paper attempts to distinguish between complex and simple applications. This paper explored side-channel analysis as a method to differentiate complex workloads from simple workloads by monitoring system-level metrics such as power consumption, cache behavior, and memory accesses. By leveraging side-channel effects such as power analysis and memory access, this study seeks to establish unique hardware signatures for complex workloads. Using tools such as Intel Pin, the data will be collected from complex and simple …

Review: Dielectric Barrier Discharge Plasma Actuators For In-Flight Applications, Sabeel Saleem Mohammed

Anthós

Dielectric barrier discharge (DBD) is a phenomenon observed when high voltage is passed through a dielectric barrier at high frequencies. Current DBD plasma actuators (PAs) excel at laminar fluid boundary layer control but suffer from limited momentum flux and fluid mechanic inefficiencies. In this article, Mohammed analyzes previous discourse on DBD PAs and offers directions for future research and potential DBD PA applications. Previous work on DBD PAs documented thrust generation at high voltages and frequencies, thrust in varying fluid compositions, and vortex generation. However, certain arrangements hinder flow magnitudes, limiting the use of multiple DBD PAs in close proximity. …

Fault Identification And Localization In Distribution Grids Based On An Attention-Hybrid Graph Neural Network, Xingjian Shan

Theses and Dissertations--Electrical and Computer Engineering

This thesis proposes a multi-task fault diagnosis framework for distribution systems based on Graph Convolutional Networks (GCN) and an enhanced Graph Attention Network (GATv2). By representing the power grid as a graph with electrical features and topological connections, the model simultaneously performs fault type classification and fault location prediction. The architecture incorporates residual connections, multi-head attention, and a Jumping Knowledge module to capture multi-scale structural patterns, while dynamic loss weighting ensures balanced task optimization under noise and sparsity. Experimental results on the IEEE 123-node test feeder demonstrate a fault classification accuracy of 96.43%, and fault localization accuracies of 84.64% (strict), …

Surface Morphology And Moisture Adsorption/Desorption Characteristics Of Hybrid-Dielectric Moisture Sensors, Ronak Ali

Theses and Dissertations--Electrical and Computer Engineering

Relative humidity sensors are used for high-humidity measurement. Moisture sensors, or dew point sensors are used for low-humidity measurement (< 1 ppm_v). The dissertation contains two parts of studies. In the first part, the effect of surface morphology on the response speed of moisture sensors is studied. Moisture sensors using α-Al₂O₃ films as porous dielectric materials deposited by anodic spark deposition are studied. In this part of the study, a variety of small pores have been studied to investigate the response speed of moisture sensors. Three different surface morphologies have been studied using scanning electron microscopy. One …

Measurement Of Moisture Levels In Oils And Lubricants Using A Novel Moisture Sensor, Aaron Swartz

Theses and Dissertations--Electrical and Computer Engineering

It is very challenging to measure moisture levels in oils. There is not a good method to measure it. Using the novel moisture sensor, we tried various methods to measure the moisture levels in oils. The initial trials are to immerse the sensor chip into the oils to see any sensor reading changes with the change of moisture levels in oils. It was observed that the sensor reading was unstable. The idea for immersion of the sensor chip into the oils failed. The last idea is to heat the oil to let all moisture evaporate fully. Before heating, the dew …

Mathematical-Programming Modeling Of Power-Electronics-Based Microgrid Systems, Jack A. Robey

Theses and Dissertations--Electrical and Computer Engineering

The emergence of power-electronics-based microgrid systems is driven by the shift to cleaner energy, transportation electrification, renewable integration, grid modernization through smart grid advancements, and growing demand for energy-efficient solutions. For utilities, these systems present unique opportunities for enhancing grid resilience, improving load management, and enabling distributed energy resource integration. This work presents a modeling and simulation approach for microgrid systems that uses mathematical programming to represent power flow and capture the system dynamics. By solving an optimization problem at each time step, the method enables evaluation of power distribution and system performance under a range of operating conditions, without …

Computing With Photonic Phase Change Memory, David B. Pippen

Theses and Dissertations--Electrical and Computer Engineering

A recent breakthrough in silicon photonics includes the discovery and use of phase changing materials (PCMs). These materials can be programmed to store nonvolatile values, and when a stored value in a PCM cell is read, it changes the amplitude of the read signal, imprinting the value held into the PCM cell on the amplitude of the read signal. This thesis proposes a new approach to using PCM cells not only for photonic memory but also as a substrate to perform multiplications in the photonic domain. The proposed multiplier uses PCM cells to encode amplitude-analog weight values and differing lengths …

Scalable Hypergraph Structure Learning With Diverse Smoothness Priors, Benjamin T. Brown

Theses and Dissertations--Electrical and Computer Engineering

In graph signal processing, learning weighted connections between nodes from signals is a fundamental task when the underlying relationships are unknown. With the extension of graphs to hypergraphs, where edges can connect more than two nodes, graph learning methods have similarly been generalized to hypergraphs. However, the absence of a unified framework for calculating total variation has led to divergent definitions of smoothness and, consequently, differing approaches to hyperedge recovery. This challenge is confronted in this work through generalization of several previously proposed hypergraph total variations, allowing ease of substitution into a vector-based optimization. To this end, a novel hypergraph …

Electromagnetic Integral Equation Methods For High-Order Field Predictions, Jordon N. Blackburn

Theses and Dissertations--Electrical and Computer Engineering

Methods like the Method of Moments (MoM) or the locally-corrected Nyström (LCN) method are employed to discretize and solve electromagnetic integral equations. This process results in large, dense systems of linear equations that must be solved. In many cases, the elements of the system matrix can be computed analytically or approximated with high-order numerical methods. In this thesis, various approaches are presented to improve the accuracy and efficiency of integral equation solutions.

The second chapter derives a modified form of the low-rank matrix approximation algorithm known as the adaptive cross approximation (ACA). The original ACA has been observed to lose …

Lifecycle Carbon Footprint And Sustainability Evaluation Of Dram-Based Processing In Memory Computing Architectures, Samrat Pravin Patel

Theses and Dissertations--Electrical and Computer Engineering

The use of computing technologies has significantly enhanced several aspects of our day-to-day lives. But it has still revealed significant environmental concerns, primarily related to greenhouse gas emissions and energy consumption. Initially, the primary environmental problems associated with computing were energy consumption during device operation. However, with the rapid advancement of technology and increasing computational demands, attention has shifted towards the embodied carbon footprint. This term refers to the total greenhouse gas emissions throughout a product’s lifecycle from the extraction of raw materials to end-of-life processing. It has become increasingly significant in the context of manufacturing integrated circuits (ICs), such …

Scalable Systems And Devices For Wireless Charging Of Electric Vehicles, Donovin D. Lewis

Theses and Dissertations--Electrical and Computer Engineering

The rising adoption of electric vehicles creates new opportunities that are not possible with conventional gas-powered vehicles such as wireless charging of electric vehicles (EV). Wide-scale implementation of wireless charging could result in benefits unique to EVs such as operation without human intervention, improved charging accessibility, and even in-route wireless charging for charge-sustaining or extended driving range operation. As the technology is in the early stages of development, there are many open-ended challenges to tackle including but not limited to coil and systems cost, weight and size, stray field emissions in high-power, high-frequency operation, and dynamic wireless charging system design …

Analysis And Design Optimization Of Electric Machines With Field Intensifying Configuration, Ali Mohammadi

Theses and Dissertations--Electrical and Computer Engineering

The design and optimization of electric machines face increasing demands for efficiency, improved torque density, manufacturability, and effective utilization of materials. Meeting these demands is particularly vital in for example, electric vehicles (EVs) and renewable energy systems, where performance, reliability, and cost are critical. In this dissertation innovative field-intensifying electric machine configurations have been explored, emphasizing advanced topologies, computational modeling, and optimization techniques to advance the state of the art in electric machine design and analysis.

Electric machines with high torque density are essential for many low-speed direct-drive systems, such as wind turbines, in-wheel traction, and industrial automation. This dissertation …

Multi-Objective Design Optimization Of Power Converters For Electric Aircraft Propulsion, Ben Luckett

Theses and Dissertations--Electrical and Computer Engineering

As global focus shifts to the electrification of the aviation sector, the need for high efficiency, lightweight, and reliable electric aircraft propulsion power converter systems has become apparent. These goals can be somewhat conflicting with each other, and a single multi-domain-optimized solution is not guaranteed. The search for a design which presents satisfactory merits becomes a drudge through various trade-off studies which can expend vast quantities of manpower and time. As a remedy to this, design automation allows the process to be computer-assisted. This dissertation presents the core fundamentals for a general multi-objective design optimization framework intended for the design …

Investigations Of Conjugate Heat Transfer And Fluid Flow In Partitioned Porous Cavity Using Darcy-Forchheimer Model: Finite Element-Based Computations, Nasir Yasin, Shafee Ahmad, Muhammad Umair, Zahir Shah, Narcisa Vrinceanu, Ghadah Alhawael

Mathematics & Statistics Faculty Publications

The conjugate heat transfer and fluid flow has vast applications in thermal engineering, particularly for cooling in thermal devices, and automobile engines. This study investigates conjugate heat transfer in 2D enclosures, featuring thin solid fins attached to a porous bottom wall. The porous medium is considered isotropic and homogeneous by the Darcy-Forchheimer model, with fluid phases in local thermal equilibrium. The boundary conditions at the porous fluid interface ensure continuity of the velocities, stresses, temperature, and heat flux. The phenomenon is mathematically modelled by obtaining a set of partial differential equations. The finite element method (FEM) is used to perform …

Enhance The Design Of Low-Cost Fast Charging Battery Systems For Electric Mobility Systems, Omar Matar, Abdalrahman S. Alneklawy, Yara M. El-Hawary, Ahmed M. Elbeshbeshy, Ali Shoman, Ahmed R. Alagmy, Ahmed Mashaly, Arwa G. Saheen, Sahar S. Kaddah, Basem M. Badr

Mansoura Engineering Journal

The need of electric mobility (E-Mobility) systems increases daily, where the E-Mobility systems contribute in decreasing gas emissions from transportation Electric motorcycles (E-Motorcycles) are one of the E-Mobility systems, which reduce the problems resulting from traditional fossil fuel exhausts. This paper discusses the design and development of low-cost battery systems for E-Motorcycles, where a fast charging system is simulated, analyzed, and deployed to charge a battery package that outputs 72V & 8A at rated performance. Research and analysis of different power converter topologies are performed with respect the cost and system performance. A battery tester circuit is designed and built …

Advancing Electrical Stimulation: Full-Head Mri Segmentation For Abnormal Brain Anatomy With Tdcs, Andrew Birnbaum

Dissertations and Theses

Evaluating the effectiveness of transcranial direct current stimulation (tDCS) is essential for guiding its integration into therapeutic and performance-enhancement applications. In our laboratory, we investigate the efficacy of tDCS across multiple experimental models, including both animal and human studies. I have contributed significantly to the execution and analysis of these experiments, which include studies in rats and healthy human participants aimed at evaluating whether electrical stimulation of the motor cortex can enhance motor learning. These studies assess improvements in fine motor performance resulting from tDCS. In stroke patients, I contribute to our investigation of tDCS as a rehabilitative intervention, particularly …

From Tpu To Qpu: Bridging Fidelity Gaps Across Next-Generation Computing Systems, Mohammad Walid M. Charrwi

Dissertations and Theses

Modern computing systems continue to advance rapidly, enabling unprecedented computational capabilities across diverse domains. Among these powerful architectures are AI accelerators such as Tensor Processing Units (TPUs) and quantum computing systems utilizing Quantum Processing Units (QPUs) stand out as trans-formative technologies. Despite their potential, these systems share significant challenges related to hardware infidelity, manifested as error-induced degradation in computational accuracy and reliability. This thesis explicitly addresses cost-effective methods to screen-out defective AI accelerators across next-generation computing architectures and boost quantum circuit output fidelity through hierarchical circuit optimization using advanced machine learning methodologies.

This thesis first proposes a cost-effective testing methodology …

Renewable Energy Integration In Nyc Subway: Solar Panels (Under Railroads And At The Subway's Edge) & Vertical Axis Wind Turbines (Vawts) Near Tracks, Pengdwinde Olivier Saba

Dissertations and Theses

As urban populations continue to expand, the demands on public transit systems in densely populated regions like New York City are escalating. Multiple cities face the dual challenge of increasing ridership and the imperative to minimize their environmental footprints.According to Law 97 in NYC, the goal is to reduce emissions by 40% and to reach net zero by 2050. An innovative solution will need to be integrated into the NYC environment, such as the subway system, where there are a potential unuse space, building rooftop, since we know that spaces in New York City are very critical, such as these …

Metasurfaces And Their Applications In Photonic Devices, Shuwei Guo

Dissertations and Theses

Metasurfaces are flat artificial optical elements composed of dielectric and/or metallic nanostructures. They can manipulate light in unprecedented ways by altering amplitude, phase, and polarization at subwavelength scales. The ability of these two-dimensional elements to perform multiple optical functions within compact optical systems—while offering high functionality, small form factors, and easy integration into optoelectronic devices—has sparked significant interest across various fields and industries. These applications span imaging, sensing, nonlinear and quantum optics, optical computing, automotive technology, augmented and virtual reality, and more.

In this dissertation, we explore and design new multifunctional metasurfaces with a focus on manipulating spectral responses. First, …

A Comprehensive Academic And Industrial Survey Of Blockchain Technology For The Energy Sector Using Fuzzy Einstein Decision-Making, Umit Cali, Annabelle Lee, Barry Hayes, Claudio Lima, D. Jonathan Sebastian-Cardenas, David Flynn, Emre Kantar, Farrokh Rahimi, Kaung Si Thu, Marco Pasetti, Marthe Fogstad Dynge, Merlinda Andoni, Muhammet Deveci, Murat Kuzlu, Raquel Alanso, Kim-Kwang Raymond Choo, Sambeet Mishra, Shammya Shananda Saha, Sonam Norbu, Srinikhil Gourisetti, Ugur Halden, Vahid Hosseinezhad, Valentin Robu

Engineering Technology Faculty Publications

The global energy sector is undergoing a significant transformation driven by decarbonization and digitalization, leading to the emergence of Distributed Ledger Technology (DLT) — particularly blockchain — as a promising tool for enhancing transparency, security, and efficiency in modern power systems. This study aims to provide a comprehensive academic and industrial survey of blockchain applications in the energy sector and develop a robust decision-making framework to identify and prioritize the most promising real-world use cases based on multidisciplinary criteria. A three-stage methodology was adopted: (i) a literature and market review encompassing over 300 academic publications and commercial blockchain initiatives in …

Differential Equations' Coverage In Circuits And Heat Transfer Courses In An Engineering Technology Curricula, Otilia Popescu, Orlando Ayala

Engineering Technology Faculty Publications

Differential equations are at the core of any undergraduate engineering as well as of science programs. While a course in differential equations is required by any engineering degree, it is not a requirement for engineering technology programs, which usually require mathematics up to calculus I. This paper discusses the undergraduate engineering technology curricula, focusing on how differential equations are taught to engineering technology students and how they are covered in the programs. In particular, the paper will discuss the treatment of differential equations in electrical circuits and heat transfer courses.

Design, Fabrication, & Laboratory Testing Of A Strain Gage Instrumentation System For Marine Applications, Salem C. Homrighausen

UNF Graduate Theses and Dissertations

A strain gage-based instrumentation system was designed and fabricated to measure the moment present at the base of a mock, diesel-engine snorkel for a submerged vehicle designed to operate in the surf zone. Afterwards, a lab experiment was designed and executed to determine the accuracy of the instrument and a 2-dimensional, matrix-vector equation was formulated to relate pairs of voltages, Vx and Vy, to moments, Mx and My for the experiment. Three versions of this model were built. The first model was created using traditional statics equations governing strain, stress, moment, force. The second and third models were built directly …

Waveforms For Next Generation Non-Stationary Channels, Zhibin Zou

Electronic Theses & Dissertations (2024 - present)

Waveform design aims to achieve orthogonality among data signals/symbols across all available Degrees of Freedom (DoF) to avoid interference while transmitted over the channel. Precoding involves the decomposition of the channel matrix into orthogonal components for the purpose of constructing a precoding matrix that is then combined with the data signal to achieve orthogonality in the spatial dimension. On the other hand, modulation uses orthogonal carriers in a certain signal space to carry data symbols with minimal interference from other symbols. However, it is widely evident that next Generation (xG) wireless systems will experience very high mobility, density and time-varying …

Secured Communication And Coexistence For Efficient Spectrum Utilization, Xue Wei

Electronic Theses & Dissertations (2024 - present)

Over the years, the demand for wireless communications has grown exponentially, resulting in a scarcity of available spectrum. This scarcity leads to the need for efficient spectrum utilization, a key factor in ensuring reliable and uninterrupted communications. One of the key challenges in achieving reliable communication is ensuring secure transmissions to protect the privacy and integrity of data for active users. Wireless communications are vulnerable to eavesdropping, interception, and unauthorized access, which can compromise the confidentiality and integrity of transmitted data. The coexistence of multiple wireless communication systems is another challenge to be addressed for passiver users. In many cases, …

Solar Energy Prediction Using Advanced Hybrid Machine Learning Models, Jelawi A. Alqhtani

UNF Graduate Theses and Dissertations

Accurate short-term forecasting of solar power generation is critical for the reliable and cost-effective operation of renewable-based microgrids, where sudden weather-induced variability can compromise grid stability, battery scheduling, and energy trading decisions. Traditional physical and statistical models struggle to capture the complex non-linear relationships and localized weather effects, while individual deep learning architectures often exhibit systematic biases such as chronic under-prediction of peak generation. This thesis proposes a novel Cross-Feedback Ensemble framework that combines the complementary strengths of Long Short-Term Memory (LSTM), Gated Recurrent Unit (GRU), and one-dimensional Convolutional Neural Network (1D-CNN) models through an iterative cross-feedback mechanism and a …

Advancing 4h-Silicon Carbide Power Mosfets Through Three-Dimensional Technology Computer Aided Design Optimization, Skylar A. Deboer

Electronic Theses & Dissertations (2024 - present)

This research contributes to the advancement of 1.2 kV 4H-Silicon Carbide (SiC) Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) through the development and implementation of sophisticated three-dimensional Technology Computer-Aided Design (3D TCAD) methodologies. These advanced simulation techniques enable comprehensive evaluation of innovative unit cell architectures that remain inaccessible to conventional two-dimensional (2D) TCAD approaches. By leveraging these 3D simulation capabilities, this work facilitates significant improvements in both the performance and reliability of next-generation wide-bandgap power devices.

Power devices convert electrical energy between different forms throughout the power grid making them essential in applications ranging from personal electronics, electric vehicles, renewable energy systems, industrial …

Beyond Assessment Security: A Critical Policy Analysis Of Four Alternative Strategies To Uphold Academic Integrity And Adopt The Genai Transformation Of Teaching And Learning For An Accredited Engineering Degree, Sasha Nikolic, Montserrat Ros, Yasir M. Al-Abdeli, Helen Fairweather

Research outputs 2022 to 2026

Generative Artificial Intelligence (GenAI), exemplified by tools such as ChatGPT, has posed significant challenges and opportunities in the realm of academic integrity, particularly in engineering education. This commentary critically examines alternative strategies that go beyond traditional assessment security, aiming to uphold academic integrity while embracing the transformative potential of GenAI in teaching and learning. In the context of programs that rely on unit level outcomes to determine the overall student progression (not the programmatic approach to progression), this study identifies and explores four strategies that may offer potential improvements to assessment security: I-risk-level analysis, which aligns the mix of supervised …

Modulation Techniques For Underwater Acoustic Communication: A Comprehensive Survey, Muhammad Haziq, Quoc Viet Phung, Stefan Lachowicz, Daryoush Habibi, Iftekhar Ahmad

Research outputs 2022 to 2026

The underwater acoustic channel poses a significant challenge among communication mediums due to its time-varying dynamics, long multipath propagation, and severe Doppler shifts. Ensuring reliable data transmission under these conditions demands advanced modulation techniques, sophisticated signal processing algorithms, and high energy consumption. Moreover, underwater communication nodes typically have limited battery reserves, making them difficult and costly to replace or recharge. Additionally, as underwater communication networks expand, the risk of security threats that could compromise the system has increased, necessitating robust security measures that add further computational overhead. This comprehensive survey reviews the state-of-the-art modulation techniques for underwater acoustic communication, concentrating …

Energy-Efficient Resource Allocation For Mission-Critical Applications In Underwater Acoustic Networks, Walid K. Hasan, Iftekhar Ahmad, Quoc Viet Phung, Yue Rong, Haitham Khaled, Daryoush Habibi

Research outputs 2022 to 2026

The Internet of Underwater Things (IoUT) has emerged as a vital technological domain, significantly advancing underwater exploration and communication capabilities. At the core of this paradigm is Underwater Acoustic Communication (UAC), which acts as the primary medium for data transmission in underwater environments, including environmental monitoring, security and surveillance, and underwater exploration. Despite its significance, UAC systems face inherent challenges such as limited bandwidth, high signal attenuation, and long propagation delays. These limitations become particularly significant in mission-critical maritime operations, such as warning systems, underwater navigation and control, and diver safety or emergency communications, where timely and reliable data transmission …

Forecasting Data-Driven System Strength Level For Inverter-Based Resources-Integrated Weak Grid Systems Using Multi-Objective Machine Learning Algorithms, Md Ohirul Qays, Iftekhar Ahmad, Daryoush Habibi, Mohammad A.S. Masoum

Research outputs 2022 to 2026

Shortage of grid-fault level, known as system strength inadequacy, impacts on grid instability and can lead to blackouts. System strength is generally measured by short circuit ratio index at point of coupling (POC) of inverter-based resources (IBRs) and the grid system. Nowadays, accurate knowledge of system strength forecasting for ‘next day’ to ‘next week’ duration is essential to power system operators, owing to the higher-growth of IBRs. However, releavant publications about this subject remain limited when compared with load demand, active and reactive power prediction. Therefore, a data-driven system strength forecasting scheme is presented in this paper to surmount these …