Engineering Commons^™

Clinic Vs. Daily Life Gait Characteristics In Patients With Spinocerebellar Ataxia, Vrutangkumar V. Shah, Daniel Muzyka, Adam Jagodinsky, Hannah Casey, James Mcnames, Mahmoud El-Gohary, Kristen Sowalsky, Delaram Safarpour, Patricia Carlson-Kuhta, Fay B. Horak, Christopher M. Gomez

Electrical and Computer Engineering Faculty Publications and Presentations

Background:

Recent findings suggest that a single gait assessment in a clinic may not reflect everyday mobility.ObjectiveWe compared gait measures that best differentiated individuals with spinocerebellar ataxia (SCA) from age-matched healthy controls (HC) during a supervised gait test in the clinic vs. a week of unsupervised gait during daily life.

Methods: Twenty-six individuals with SCA types 1, 2, 3, and 6, and 13 (HC) wore three Opal inertial sensors (on both feet and lower back) during a 2-minute walk in the clinic and for seven days in daily life. Seventeen gait measures were analyzed to investigate the group differences using …

Analyzing Lf/Vlf Lightning Waveforms To Estimate D-Region Electron Density Profiles, William R. Smith, Erin H. Lay, Kyle E. Fitch, Daniel J. Emmons

Faculty Publications

Lightning waveforms in the low frequency (LF; 30–300 kHz) and the very low frequency (VLF; 3–30 kHz) bands can be exploited to produce data-driven ionospheric D-region electron density profile (EDP) estimates with significantly higher spatial and temporal coverage than previously available. The lightning waveforms used in this paper are signals detected in the LF/VLF of negative cloud-to-ground lightning by the Earth Networks Total Lightning Detection Network. Each waveform contains a ground wave and a time-delayed ionospheric reflection. The time delay between the ground wave and ionospheric reflection has previously been used to estimate a single specular reflection altitude, where LF/VLF …

A Tailored Analog-To-Digital Converter Architecture For Optimal Performance In Troponin Cardiac Protein Detection, Karem Abdelgawad, Sameh O. Abdellatif

Electrical Engineering

In recent years, the detection of troponin cardiac proteins has emerged as a crucial component in the diagnosis and management of acute coronary syndromes. This paper presents a tailored analog-to digital converter(ADC) architecture specifically designed to enhance the performance of diagnostic systems for troponin detection. Utilizing a 180 nm CMOS process technology, the developed 8-bit Successive Approximation Register(SAR) ADC integrates key components, including a preamplifier, comparator, and a digital-to-analog converter(DAC), to optimize signal processing and ensure accurate data conversion from analog to digital formats. The ADC architecture is evaluated for its ability to achieve a substantial sampling rate of 10 …

Large Lithium-Ion Battery Model For Secure Shared E-Bike Battery In Smart Cities, Donghui Ding, Zhao Li, Linhao Luo, Ming Jin, Bin Zhu, Yichen Zhong, Junhao Hu, Peng Cai, Huiqi Hu

Research Collection School Of Computing and Information Systems

Electric bikes powered by lithium-ion batteries are increasingly used in smart cities to promote sustainable mobility and efficient delivery services. However, limited battery range and slow plug-in charging remain key challenges. Shared electric bike battery systems, facilitated by battery swapping stations, offer a promising solution by enabling quick and efficient battery replacements. However, their success hinges on accurate anomaly detection, battery health estimation and remain range prediction. These tasks remain challenging due to data scarcity, battery diversity and environmental variability. Here we show that a large-scale lithium-ion battery model trained on over ten million battery time series data enables robust …

In Situ High-Temperature Raman Spectroscopy For Online Eaf Slag Analysis, Bohong Zhang, Hanok Tekle, Ronald J. O'Malley, Jeffrey D. Smith, Farhan Mumtaz, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Real-time monitoring of slag chemistry is critical for optimizing Electric Arc Furnace (EAF) steelmaking operations, where dynamic variations in slag composition directly influence slag foaming, refractory degradation, and thermal efficiency. Conventional techniques such as X-ray fluorescence (XRF), Fourier-transform infrared (FTIR), and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS) are commonly used to analyze slag composition, but their offline nature and equipment constraints limit their applicability for online monitoring in harsh industrial environments. To address this challenge, we present an in situ, high-temperature analytical approach that integrates Raman spectroscopy with a custom-designed fiber-optic probe for real-time slag characterization at …

Electrical Characterization Of Germanium Tin Alloys And Devices For Space Reliability, Kevin K. Choe

Theses and Dissertations

GeSn (germanium tin) alloys are potentially well suited for near-mid infrared space optoelectronic applications. Alloys of GeSn have similar properties to group III-V and mercury-cadmium-telluride semiconductors and are compatible with cost-effective complementary metal oxide semiconductor (CMOS) manufacturing technology. Recent progress in non-equilibrium remote plasma-enhanced chemical vapor deposition (RPECVD) has enabled the crystalline growth of GeSn with Sn concentrations of up to 10% without Sn surface segregation. Several experimental studies in previous literature report CVD- or molecular beam epitaxy (MBE)-grown GeSn alloys achieving a direct bandgap with 6%-9% Sn content. This novel growth technique opens opportunities for a cost-effective, next-generation optical …

Nanostructured Zinc Stannate Perovskite Films Synthesized Via Molten Salt Modified-Solvothermal Method For Enhanced Piezoelectric Properties, Christopher Munoz, Alyssah Fuentes, Christian Alaniz, Tarik Dickens, Mohammed Jasim Uddin

School of Integrative Biological & Chemical Sciences Faculty Publications

Three dimensional (3D) piezoelectric zinc stannate (ZnSnO3) nanoweb arrays are synthesized using a molten salt modified solvothermal method and deposited in PDMS films for electrochemical analysis of its piezoelectric response. This work is a preliminary assessment of comparative piezoelectric efficacy influenced by changes in synthesis, effecting dimension and particle size. Advantages of hydrothermal, molten salt, and solvothermal synthesis methods were leveraged to facilitate several chemical and surface engineering techniques to enhance piezoelectric properties by increasing the surface area of zinc stannate nanoparticles. The combination of these treatments reduce the size of zinc stannate to approximately ∼40nm-80nm weblike networks. Scanning …

Single-Molecule Orientation And Localization Microscopy, Sophie Brasselet, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Single-molecule localization microscopy (SMLM) offers enhanced spatial resolution in optical microscopy, providing detailed insights into the spatial organization of proteins in cells at the nanoscale. Over the past decade, SMLM has progressively incorporated the capability to retrieve the orientations of single molecules using their polarized dipolar emission pattern. Here we explore recent advancements in single-molecule orientation and localization microscopy (SMOLM), which yields super-resolved images of molecular three-dimensional (3D) orientations, wobble and 3D positions. This advancement opens possibilities to explore the nanoscale organization and conformation of biological molecules as well as to monitor and design local 3D optical fields in nanophotonics. …

Exopg Maturation And Owl Interface, Duncan Michael Louden

Electrical Engineering

The maturation of the ExOPG buoy generator consists of an interface to facilitate remote data acquisition of an existing battery charge controller. This module telemeters battery controller data including voltage, temperature, and state of battery charge. The data is transmitted to a communication system and is able to be viewed by humans on a 24/7 basis for continuous operation and human usage. The module works seamlessly as an addition to the existing ExOPG generator, and it does not interfere with any existing and planned components of the generator. The module is highly efficient and draws minimal power from the existing …

Improved Triboelectric Nanogenerator By As-Prepared Lithium Niobate For Energy Harvesting And Sensing Applications, Jahid Inam Chowdhury, Md. Wasikur Rahman, Md Arafat Hossain, Nicholas Dimakis, Mohammed Jasim Uddin

School of Integrative Biological & Chemical Sciences Faculty Publications

Triboelectric nanogenerators (TENGs) have garnered significant research interest due to their ability to harvest mechanical energy efficiently. In this study, we report a TENG composed of polydimethylsiloxane (PDMS) and polyvinyl alcohol (PVA) as triboelectric layers. To enhance charge generation in the PDMS composite polymer, we incorporated lithium niobate (LiNbO3) nanoparticles, leveraging their piezoelectric and ferroelectric properties. The LiNbO3 nanoparticles were synthesized using a solid-state reaction method, resulting in two distinct phases: triclinic LiNbO3 and monoclinic LiNb3O8. Various weight percentages of LiNbO3 and LiNb3O8 nanoparticles were added to the PDMS matrix to optimize power generation. The maximum open-circuit voltage (VOC) and …

Multi-Modal Depth Estimation Using Camera And Mmwave Sensors, Alston D. Devero-Belfon

Student Theses

For accurately estimating the depth of environments with varying lighting conditions, reliable methods are limited. By utilizing wireless sensor technology in conjunction with cameras, a wide range of environments can be visualized, and objects within these environments can be tracked and monitored. Such methods offer cost-effective alternatives and provide a more secure, data-at-rest option for individuals with low vision, while also enhancing machine perception. In this work, we develop such a prototype that utilizes wireless sensors and cameras, which act in sync, enabling us to estimate the depth of objects within varying lighting environments to a level that is recognizable …

Toward A Generalizable Perceptual Hashing Framework For Image Manipulation Detection, Priyanka Samanta

Dissertations, Theses, and Capstone Projects

This thesis contributes to research in adversarial image manipulation detection. The primary motivation is the increasing need to verify digital images, especially for legal evidence, journalistic proof, or social media content—where manipulated or fabricated images can mislead, defame, or distort reality. A key application and contribution of this work is the development of eWitness, a blockchain application that generates and registers image provenance at capture time to enable independent verification of authenticity. The secret sauce behind the system is SmartHash, a novel and efficient perceptual hashing algorithm designed for real-world deployment in systems like eWitness. Unlike existing algorithms, SmartHash targets …

Optimizing Object Detection For Remote Monitoring With Owl Ducklink Radios, Colin Ren-Jin Babian

Electrical Engineering

This project develops an AI powered object detection system integrated with OWL DuckLink radios to enable real time remote monitoring. The system benchmarks multiple AI accelerators using a Raspberry Pi 5 to determine their efficiency in low power, long range communication environments. By evaluating the Raspberry Pi 5 CPU (7.62W, 14.5 camera FPS, 3.8 inference FPS), Raspberry Pi AI Camera with Sony IMX500 (6.45W, 30 camera FPS, 9.2 inference FPS), and Raspberry Pi AI Hat with Hailo-8L chipset (7.80W, 30 camera FPS, >30 inference FPS), this project identifies the most effective combination of hardware and software for edge AI applications. …

Restoration Of 6-Axis Industrial-Grade Robotic Arms, Bryce Andrew Paulson, Warren Douglas Howard

Electrical Engineering

The Staubli TX60 and TX60CR are industrial-grade, six-axis robotic arms originally designed to perform complex automation tasks in manufacturing environments. Following their retirement from active industrial use, both units were restored to full operational status. As part of this project, they were reprogrammed to execute a pick-and-place routine using kids shape-sorting toys that mirrors typical workflows found in factory settings. The six degrees of freedom afforded by each robot enable a wide range of motion, making them well-suited for tasks such as material handling, product sorting, and repetitive operations typically carried out by human workers. Each model is equipped with …

Validation And Proposed Expansion Of The Data-Driven D Region Model, Kevin M. Watson

Theses and Dissertations

Predicting ionosphere effects on radio wave propagation is critical for communications and over-the-horizon radar systems. The D region is challenging to model for several reasons, one of which is chemical complexity. Ion density changes during sunrise/sunset introduce substantial uncertainty in electron density profiles (EDPs). The Data Driven D Region (D3R) model solves electron densities through an ion chemistry model and assimilates relevant space weather inputs. This study evaluates D3R against the Faraday International Reference Ionosphere (FIRI) and measurements using Very Low Frequency (VLF) propagation paths. Space weather event impacts on D3R EDPs are evaluated during the disturbed period from 8-12 …

Switching Performance Optimization Of Sic Mosfets With Digital Active Gate Drivers, Liyang Du

Graduate Theses and Dissertations

Silicon carbide (SiC) metal-oxide-semiconductor field-effect transistors (MOSFETs) have extensive applications in high-power density devices, but they exhibit quick switching transients that are problematic, including electromagnetic interference (EMI), voltage overshoot, and current imbalance between paralleled devices. The purpose of this dissertation is to maximize the switching performance of SiC MOSFETs using digital active gate drivers (AGDs). A three-level gate driving approach is presented to improve current sharing in paralleled SiC MOSFETs through turn-on voltage and gate signal delay adjustment. Closed-loop control with real-time feedback ensures high-reliability operation. For better practicability, a compact AGD structure of a single-path Class-B amplifier-based topology is …

Comparative Analysis Of Different Magnetic Anomaly Datasets Using Navigation Performance With Flight Test Data, Aaron P. Nielsen, Brandon M. Blakely, Patrick Duff

Faculty Publications

Magnetic Anomaly Navigation (MagNav) is a map-based method of navigation which relies on accurately obtaining the anomaly field to a high level of precision to achieve good navigation results. This requires utilizing high quality sensors, accurately modeling disturbance fields from the aircraft & other sources, and creating high-fidelity maps. Aeromagnetic survey data or marine track survey data must be processed into a product that can be used as a reference for a magnetic navigator and a variety of techniques can be utilized for this processing. The data collection for different survey types reflects choices typically made to study the underlying …

Shared Power, Shared Future: Navigating Technology, Ownership, And Equity In Community Battery Storage, Bassam Al-Hanahi, Nishadi Mudiyanselage, Asma Aziz

Research outputs 2022 to 2026

Community Battery Storage Systems (CBS) are gaining traction as a shared energy solution to support the growing integration of rooftop solar and electric vehicles. Operating at the neighborhood scale, CBS offers benefits such as grid flexibility, enhanced self-consumption, and cost optimization. This review provides a multidimensional synthesis of CBS developments, examining technical design, ownership structures, regulatory conditions, and community engagement. By analyzing pilot projects and demonstration trials, the paper identifies recurring challenges – including inconsistent tariff structures, limited financial viability, and unclear market roles – that constrain scalability. It also highlights emerging strategies such as Local Use of Service (LUoS) …

Design Of Robust Adaptive Nonlinear Backstepping Controller Enhanced By Deep Deterministic Policy Gradient Algorithm For Efficient Power Converter Regulation, Seyyed Morteza Ghamari, Asma Aziz, Mehrdad Ghahramani

Research outputs 2022 to 2026

Power converters play an important role in incorporating renewable energy sources into power systems. Among different converter designs, Buck and Boost converters are popular, as they use fewer components and deliver cost savings and high efficiency. However, Boost converters are known as non–minimum phase systems, imposing harder constraints for designing a robust converter. Developing an efficient controller for these topologies can be difficult since they exhibit nonlinearity and distortion in high frequency modes. The Lyapunov-based Adaptive Backstepping Control (ABSC) technology is used to regulate suitable outputs for these structures. This approach is an updated version of the technique that uses …

Renewable-Based Isolated Power Systems: A Review Of Scalability, Reliability, And Uncertainty Modeling, Mehrdad Ghahramani, Daryoush Habibi, Seyyedmorteza Ghamari, Hamid Soleimani, Asma Aziz

Research outputs 2022 to 2026

Electric power systems are increasingly becoming more decentralized. Many communities depend on isolated power systems that operate independently of the main grid. Remote, islanded, and isolated systems face challenges due to the intermittency and unpredictability of renewable energy sources. This paper reviews the current status of renewable integration and control in stand-alone power systems. It examines techniques to enhance system reliability through energy storage, hybrid systems, and advanced predictive models. Additionally, the issues related to connecting stand-alone systems, focusing on reliability and renewable penetration, are discussed. The scalability of stand-alone power systems is analyzed based on classifications of small-, medium-, …

Optimizing Hip And Knee Assistance For Walking And Sit-To-Stand Transitions: An Intrinsic Muscle Mechanics Based Predictive Approach, Neethan Ratnakumar

Dissertations

As the global population ages, the demand for wearable assistive technologies continues to rise, driven by their potential to enhance mobility and independence in older adults. Effectively designed controllers for lower-limb exoskeletons to assist sit-to-stand (STS) and walking are crucial for delivering efficient, safe, and comfortable assistance during daily activities. Traditionally, controller optimization involves biomechanical modeling and user-specific customization. Musculoskeletal simulations play a central role in this process by providing insights into human-exoskeleton interaction dynamics, thereby informing and refining control strategies.

This work presents a simulation-driven approach for developing exoskeleton controllers for walking and STS using two distinct methods: optimal …

An Audio Data-Driven Roadway Digital Twin And Its Underlying Framework For A Digitized Transportation Construction Environment, Anisha Deria, Pedro J. Chacon Dominguez, Yong-Cheol Lee, Jin W. Choi

Michigan Tech Publications

The increasing need to build and maintain transportation systems has led project managers to manage multiple projects simultaneously. Roadway projects often entail several miles of job site, making it difficult to keep track of progress and maintenance activities. To improve the situation, this study proposes an audio data-driven roadway digital twin framework for real-time and remote monitoring of construction projects. The latent characteristics of a digital twin required for establishing a digitized work environment were investigated. As a primary method of seamlessly linking virtual and physical environments, audio data classified and analyzed by deep neural network (DNN) has been employed …

Design And Optimization Of Anode Catalysts For Direct Ethanol Fuel Cells: Advances And Challenges In C-C Bond Activation And Selective Modulation Of The C1 Pathway, Kai-Chi Qin, Meng-Tian Huo, Yu Liang, Si-Yuan Zhu, Zi-Hao Xing, Jin-Fa Chang

Journal of Electrochemistry

Direct ethanol fuel cells (DEFCs) are a promising alternative to conventional energy sources, offering high energy density, environmental sustainability, and operational safety. Compared to methanol fuel cells, DEFCs exhibit lower toxicity and a more mature preparation process. Unlike hydrogen fuel cells, DEFCs provide superior storage and transport feasibility, as well as cost-effectiveness, significantly enhancing their commercial viability. However, the stable C–C bond in ethanol creates a high activation energy barrier, often resulting in incomplete electrooxidation. Current commercial platinum (Pt)- and palladium (Pd)-based catalysts demonstrate low C–C bond cleavage efficiency (

Superhydrophilic Porous Coooh Nano-Architecture With Abundant Oxygen Vacancies For Enhanced Urea Electrooxidation At Ampere-Level Current Densities, Wen-Jing Lv, Xiao-Man Tang, Xue-Tong Wang, Wen-Cai Liu, Jian-Wen Zhu, Guo-Jing Wang, Yuan-Zhi Zhu

Journal of Electrochemistry

The conversion of urea-containing wastewater into clean hydrogen energy has gained increasing attention. However, challenges remain, particularly with sluggish catalytic kinetics and limited long-term stability of urea oxidation reaction (UOR). Herein, we report the loosely porous CoOOH nano-architecture (CoOOH LPNAs) with hydrophilic surface and abundant oxygen vacancies (O_v) on carbon fiber paper (CFP) by electrochemical reconstruction of the CoP nanoneedles precursor. The resulting three-dimensional electrode exhibited an impressively low potential of 1.38 V at 1000 mA·cm⁻² and excellent durability for UOR. Furthermore, when tested in an anion exchange membrane (AEM) electrolyzer, it required only 1.53 V at …

Predicting The Response Of Tendon-Driven Prosthetic Finger With Hyperelastic Joints, Lucas Gallup, Mohamed Trabia, Brendan O'Toole

Mechanical Engineering Faculty Research

Properly designed prosthetics hands can enhance the quality of life for those suffering from limb loss. Recently, 3D-printed prosthetic hands are becoming common. In these prostheses, fingers flex through the tendons that are activated by motion of the wrist. To provide spring action, thermoplastic polyurethane (TPU) hyperelastic joints are used to connect digits to each other as well as to the wrist. While these designs are common, no model for the relationship between tendon tension and joint flexion is available. This work has developed a quasi-static virtual work-based model to predict the relationship between tendon forces and the flexion of …

Structure Regulation Engineering For Biomass-Derived Carbon Anodes Enabling High-Rate Dual-Ion Batteries, Rui Zhou, Rui Liu, Yun-Nuo Li, Si-Jie Jiang, Tian-Tian Jing, Yan-Song Xu, Fei-Fei Cao

Journal of Electrochemistry

Dual-ion batteries (DIBs) usually use carbon-based materials as electrodes, showing advantages in high operating voltage, potential low cost, and environmental friendliness. Different from conventional “rocking chair” type secondary batteries, DIBs perform a unique working mechanism, which employ both cation and anion taking part in capacity contribution at an anode and a cathode, respectively, during electrochemical reactions. Graphite has been identified as a suitable cathode material for anion intercalation at high voltages (> 4.8 V) with fast reaction kinetics. However, the development of DIBs is being hindered by dynamic mismatch between a cathode and an anode due to sluggish Li^{+ …}

Assessing Solar Radiation Patterns In Sarawak Using Measured Data And The Hargreaves-Samani Model For Photovoltaic Systems Application, Chun Yong Soo, Xian Hwa Chan, Wan Mohamad Husni Wan Mokhtar, Ahmad Rujhan Mohd Rais

Makara Journal of Technology

This study evaluates the Hargreaves-Samani model for estimating solar radiation in five locations in Sarawak: Bintulu, Kapit, Sri Aman, Kuching, and Miri (Subis), using minimum and maximum temperatures as key inputs. Analysis reveals stable minimum temperatures (19.7 °C to 28.8 °C), supporting consistent solar radiation patterns favorable for Photovoltaic (PV) performance. Miri (Subis) recorded the highest daily maximum temperature of 44.8 °C, while Kuching had the lowest at 24.7 °C, highlighting significant regional climatic variability. Analysis also indicates strong solar potential in Bintulu, Kapit, Sri Aman, Kuching, and Miri, with radiation peaking at 7.5 kWh/m², though seasonal variations impact PV …

Direct Control Strategy Using Polynomial Fuzzy-Based Adaptive Fractional Order Pid Controller, Ali Rospawan, Clara Lavita Angelina, Faisal Samsuri, Muhammad Yeza Baihaqi, Edmun Halawa, Muhammad Munajat, Vincent Vincent, Surawan Setiyadi, Irwan Purnama, Joni Welman Simatupang

Makara Journal of Technology

This paper presents a novel direct control strategy using a polynomial fuzzy neural network-based adaptive fractional order proportional integral derivative (PFNN-AFOPID) controller for nonlinear and time-varying systems. The proposed approach integrates the enhanced flexibility of fractional order calculus PID with the superior nonlinear approximation capabilities of polynomial fuzzy models, enabling dynamic adjustment of all control parameters without requiring precise mathematical modeling of system dynamics. By extending traditional PID control with fractional-order operations, the controller achieves improved frequency response and robustness against disturbances. Experimental validation on a DC motor position control system demonstrates significant performance improvements. Compared to traditional PID, the …

Analog To Digital Converters Topologies For Radar System Application: A Comparison, Kulsoom Mateen, Wafa Alharbi, Aziza I. Hussein

Effat Undergraduate Research Journal

Analog-to-digital converters (ADCs) that convert analog signals into digital ones play a significant role in radar systems. The accuracy and resolution of radar readings are significantly influenced by the quality and performance of ADCs. This paper discusses and compares the application of five different types of ADCs in radar systems. It also elaborates on each ADC's working principle, advantages, and limitations. The parameters compared are resolution and dynamic range, signal-to-noise ratio (SNR), latency and sampling rate, power consumption, size, and cost. After thorough research, we concluded that each ADC differs depending on the designer’s desired application. For example, flash ADCs …

Satellite Internet Technology: Connect The Unconnected, Nora Turki Alamoudi Ms., Aziza I.Hussien Proffessor

Effat Undergraduate Research Journal

Satellite Internet is the internet provided through a network of communication satellite constellations in space. This type of internet can cover an area of a wider range than the commonly used cable internet. The development of small-sized satellite technology in the commercial space sector has entered a vigorous phase of development. However, approximately four billion individuals worldwide lack internet access. Most of these citizens live in developing countries. It is in this context that the industry of satellite internet is expanding its social and economic development through connectivity. The implementation of the idea requires examining the advantages provided by satellite …