Powers Hall Is Once Again Filled With Coed Laughter, Tom Wilemon

Documents

Press Release about renovations to Powers Hall to be used as a coed dormitory

Best Practices For Electrical Safety At Home, Joshua Henderson, Derek Centrone

Student Research Symposium (SRS)

The household, although it’s a comfortable and relaxing environment, can in fact be riddled with everyday hazards that homeowners and residents overlook or are too complacent in acknowledging or even recognizing their presence. One such common oversight is electrical hazards. This may be due to the high usage of electricity in people’s day-to-day lives, especially since the perceived risk of electrical hazards by the public can be very low. In a household, there are many hazards present each and every day. One such hidden deadly hazard is electricity. While on the surface it doesn’t seem that dangerous, in reality, it …

Building Services Engineering January/February 2026

Building Services Engineering

No abstract provided.

Slo Botanical Garden Lean-To Carport, Saul Gracian, Sergio Gonzalez

Construction Management

This paper documents the planning, design, funding, and construction of a lean-to carport for the San Luis Obispo Botanical Garden, completed as a student-led Construction Management senior project by Saul Gracian and Sergio Gonzalez. The purpose of the project was to provide a functional storage structure for garden equipment while applying construction management principles in a real-world, nonprofit setting. The project methodology included site evaluation, collaborative design development, cost estimating, funding acquisition, regulatory review, and hands-on construction. Design decisions were informed by site constraints, county code requirements, budget limitations, and stakeholder input, resulting in a final 10’ x 12’ structure …

Skip The Grid 25-26: A Safety-Driven Solar Installation Project In The Navajo And Hopi Nations, James R. Wall

Construction Management

Skip the Grid is an interdisciplinary service-learning project that provides sustainable energy solutions to families with school-aged children living in the Navajo and Hopi Nations. In March 2026, a team of 23 students from five academic disciplines at California Polytechnic State University (Cal Poly) partnered with Heart of America, SOLV Energy, and NextPower to complete the fifth year of the program. The project's purpose was to improve quality of life and support educational success by providing reliable access to electricity, lighting, and refrigeration in underserved communities. Participants were organized into five installation teams consisting of Cal Poly students, faculty, industry …

Life Cycle Assessment And Cost Analysis Of Exterior, Electrical, And Appliance Systems In A Prefabricated Mass Timber Residential Unit, Ella Rohrbough

Construction Management

This study presents a detailed process-based life cycle assessment and life cycle cost analysis of selected building systems within a prefabricated mass timber residential unit constructed through an interdisciplinary design build project at California Polytechnic State University. The research focuses specifically on exterior envelope systems electrical infrastructure and major appliances. Material quantities were derived from a comprehensive construction material takeoff and modeled in OpenLCA using the ecoinvent database. A cradle to site system boundary including modules A1 through A5 was applied to quantify embodied environmental impacts such as global warming potential acidification fossil fuel depletion and human toxicity. Results indicate …

Impact Of Femalized Kinesthetic Learning Model On African American Middle School Girls’ Career Interest, Mercy F. Fash, Andrea Ofori-Boadu

Journal of Global Education and Research

Engaging African American middle school girls in out-of-school-time (OST) Architecture, Engineering, and Construction (AEC) programs can boost interest in male-dominated AEC careers. This study adopts Lent’s Social Cognitive Career Theory to evaluate the impact of an OST feminized AEC kinesthetic learning model (fAEC-KLM) on the career interests of this demographic. Through a qualitative research approach, fourteen (14) African American middle school girls from Guilford County, NC, completed pre- and post-interviews on how fAEC-KLM interactions influenced their AEC career interests. Inductive thematic analysis was carried out on transcribed interviews. Results show that effective components, such as lectures on AEC, bridge construction …

Inspect: Intelligent Node-Based System For Ifc Processing And Evaluation, With Conversational Tool Support —Llmassisted Natural Language Ifc Querying, Basel Abdelshaheid

Theses and Dissertations

Industry Foundation Classes (IFC) enables the open exchange of Building Information Models, yet effective validation of real-world IFC deliveries remains challenging. Project models frequently contain incomplete, inconsistent, or incorrectly exported metadata, and explicit IFC relationships are often missing or degraded during conversion from proprietary formats. Many validation questions are inherently spatial, including connectivity, containment, proximity, and clashes, and therefore cannot be answered reliably from properties alone. As a result, federated model validation is often slow, fragmented across tools, and dependent on specialized IFC expertise.

This challenge is increasingly important for coordination, quality assurance, and information management across disciplines and lifecycle …

Utilization Of Plastic Waste In The Concrete Industry, Nancy Abdelmoneim Sakr

Theses and Dissertations

Plastic recycling has emerged as a crucial strategy that aligns with environmental, social and economic sustainability indicators. Currently, substantial volumes of plastic waste are either deposited in landfills or incinerated, neglecting the potential to harness its embodied energy and the energy consumed for producing virgin materials. A key advantage of plastic lies in its promising mechanical properties. Concrete mix design is fundamental to a wide range of construction applications, including brick walls, reinforced concrete slabs and concrete pavements. Despite the adoption of recycled plastic in construction materials in various countries, its widespread implementation remains limited. This is primarily due to …

Nahb Production Home Competition As A Learning Tool Towards Incorporating Business Skills In Construction Management Programs, George Berghorn, Chandler Jones, M.G. Matt Syal

The Professional Constructor

There is a growing realization in the construction industry that the traditional focus of Construction Management (CM) education on technical competencies (such as scheduling, estimating, and construction methods) is insufficient in preparing graduates to meet the strategic and leadership demands of the modern construction profession. A successful construction company requires more than project execution; it demands expertise in business development, financial management, marketing, risk management, and organizational leadership. The disparity between the technical and business aspects of CM education has produced graduates who may succeed in project management yet find it challenging to engage with comprehensive business operations.

This study …

Construction Industry Preparedness For Generation Z And Millennials: Aligning Industry Characteristics With Workforce Job Preferences, Ameenullah Amiri, Dhaval R. Gajjar, Jason D. Lucas

The Professional Constructor

The construction industry in the United States suffers from workforce shortages, partly due to younger generations being hired more slowly than baby boomers retire. Generation Z’s (Gen Z) lack of interest in joining the construction industry, coupled with the retirement of older workers, has amplified the problem. This paper investigates existing literature to identify the work and career preferences of Gen Z and Millennials and determine where the industry may focus efforts to attract these two generations. Through a systematic literature review, this study identified overlaps and gaps between the current construction industry workforce’s perceptions of the industry and the …

Heat-Related Injuries And Fatalities In Roofing: Osha Investigations From 2003-2024, Kenneth S. Sands Ii, Benjamin Marshall

The Professional Constructor

This study examines 52 heat-related roofing incidents recorded by the Occupational Safety and Health Administration (OSHA) between 2003-2024 to describe patterns in outcomes and identify trade-specific prevention opportunities. Researchers built a structured dataset from OSHA investigation summaries and analysed frequencies of the incidents and their associations with month, time of day, project type, end use, and age to complement a thematic review of narrative abstracts. Fifty-eight percent of cases were fatalities, with the remainder split between hospitalized and non-hospitalized injuries; these statistics underscore the consequences of heat events that trigger OSHA reporting. There was a clear relationship between number of …

0897: William A. “Red” Dawson Collection, 1915-2023, Marshall University Special Collections

Guides to Manuscript Collections

William Alfred “Red” Dawson, a native of Valdosta, Georgia, led his high school football team to a state championship and played for four years at Florida State University. Dawson briefly played professional football for the Boston Patriots in the AFL and the Orlando Panthers. He was serving as an assistant football coach at Marshall University when a fatal plane crash killed seventy-five players, coaches, staff, and prominent citizens of Huntington. Dawson was essential in restarting the Marshall University football program, serving as acting head coach and coached through the 1971 season. He then began working in the construction industry and …

Open House Celebration, The University Of North Alabama

Documents

Invitation for open house of Flowers Hall Annex, the renovated Collier Library Facility, and the new Computer Center at UNA

The Development Of A Convenient And Consistent Methodology For Flight Proficiency To Certify Multi-Rotor Uas Pilots For State Departments Of Transportation, Colin H. Dees, Joseph M. Burgett

The Professional Constructor

To fly an unmanned aircraft system (UAS), commonly referred to as a “drone,” the Federal Aviation Administration (FAA) requires pilots to pass a knowledge test. There is no requirement at the state or federal level for drone operators to demonstrate the ability to operate a UAS. The National Institute of Science and Technology (NIST) has created an exam for public and private entities to assess basic UAS flight proficiency. It is the only nationally recognized flight proficiency protocol. NIST does not provide a scoring recommendation and leaves it to the user to determine the minimum criteria to pass. There is …

Optimizing Energy Efficiency In Educational Buildings Through Facade Material Selection, Rania Rushdy Moussa, Malak Ayman, Khloud Khalid

Architectural Engineering

Facade material selection is crucial for improving building performance and reducing environmental effect, as evidenced by the growing demand for sustainable architectural solutions, especially in educational institutions. The use of typical, non-sustainable facade materials in Egyptian educational buildings is a major cause of the country's high energy consumption, poor indoor air quality, and rising carbon emissions. This research explores the possibility of using cuttingedge facade materials to promote sustainability in Egyptian university buildings in order to close this crucial gap. The study incorporates a mixed-methods approach and begins with a qualitative theoretical review that includes a thorough literature analysis. A …

The Professional Constructor, Full Issue

The Professional Constructor

Full Issue, Winter 2026

Volume 50, Number 01

From Inside The Recording Studio, Mckayla J. Adkison

Capstone Projects and Master's Theses

This project documents the historical, technical, and creative significance of recording studios through both industry examples and the design and construction of a personal backyard studio. By examining iconic studios such as Abbey Road and Capitol Records, the paper highlights how technological innovation, acoustic engineering, and architectural design have shaped the evolution of recorded music. These concepts are then applied to the planning and construction of a custom-built recording studio, emphasizing room dimensions, sound isolation techniques, acoustic treatment, lighting, and sustainable design choices. In addition, the project addresses the importance of aesthetics and emotional comfort in creating a space that …

Building Services Engineering November/December 2025

Building Services Engineering

No abstract provided.

The Iron Pyramid: Expanding The Iron Triangle To Integrate Safety As A Fundamental Dimension Of Construction Success, Laura Cooley

All Theses

For more than fifty years, construction project success has been judged by staying on schedule, remaining within budget, and completing the planned scope of work—an approach commonly known as the “Iron Triangle” (Barnes, Ph.D., 2006). While these measures are important, they do not capture the full range of factors that determine whether a project truly succeeds.

This study introduces the “Iron Pyramid” (Cooley, 2025), a model that expands the traditional framework by adding a fourth dimension: safety. Safety is understood not simply as regulatory compliance or the absence of injuries, but as a holistic construct encompassing project culture, leadership practices, …

Evaluating High School Students’ Perceptions About The Construction Industry: Views To Consider And Improve The Inclination Towards A Career In Construction, Radhika Soni

All Theses

The construction industry continues to face a critical workforce shortage, intensified by declining interest among high school students who often hold narrow or negative views of construction careers. This study examines students’ perceptions of the construction industry, the experiences that shape those perceptions, and the factors influencing their likelihood of pursuing construction-related careers. A mixed-methods design was used, consisting of a survey distributed to students in Grades 9–12 across the upstate region of South Carolina. Quantitative analyses included descriptive statistics, Kruskal–Wallis tests, Mann–Whitney U tests, and Spearman correlations, while qualitative responses were examined through thematic analysis.

Findings show that most …

Mass Timber Construction: Products, Performance And Design, Anthony Harvey

Civil Engineering Professional Development Seminar

Due to their high strength, dimensional stability and positive environmental performance, mass timber building products are quickly becoming materials of choice for sustainably‐minded designers. This presentation will provide a detailed look at the variety of mass timber products available, including glue‐laminated timber (glulam), cross laminated timber (CLT), nail laminated timber (NLT), heavy timber decking, and other engineered and composite systems. Applications for the use of these products under modern building codes will be discussed, and examples of their use in U.S. projects reviewed. Mass timber’s ability to act as both structure and exposed finish will also be highlighted, as will …

Building Services Engineering September/October 2025

Building Services Engineering

No abstract provided.

Building Services Engineering July/August 2025

Building Services Engineering

No abstract provided.

Evaluating The Role Of Building Information Modeling (Bim) In Minimizing Delays And Reducing Costs In Construction Projects, Hussein Elsayed Mohamed Ismail, Mohammad Ahmad Mohammad Abdulhadi

Journal of Engineering Research

The implementation of Building Information Modeling (BIM) as a construction industry technology delivers extensive effects on project duration and financial management. This investigation examines BIM as a technology specifically designed to cut down construction project delays and decrease expenditures. The scholarly review of existing research material through a secondary approach allows this study to identify BIM's major value contributions.

The implementation of BIM technology enables project schedules to reach improved accuracy which results in a reduction of project delays by 15-25% because of its automation features and effective clash detection and real-time coordination benefits. The application of building information modeling …

Outdoor Exercise Area Renovation, Hagan T. Jackson, Chet S. Crummett, Jesse E. Muth

Architectural Engineering

The Outdoor Exercise Area Renovation project revitalizes a well-used outdoor exercise area located near the baseball fields at Cal Poly. The existing exercise equipment, originally donated by Maino Construction, was weathered, but the area remained well-utilized and presented potential for revitalization. This project transforms the site into a functional and resilient space by replacing the pull-up and dip bar equipment, constructing a 300 square foot pavilion, and adding a concrete slab and integrated concrete benches. The new design enhances usability, providing a multifunctional area for the Cal Poly community to exercise, socialize, relax, and enjoy scenic views.

The renovated area …

Untold Stories – Precast Concrete Bench Construction And Installation, Lucas Llodra

Construction Management

This paper outlines the design-build process led by an interdisciplinary team of Construction Management students from California Polytechnic State University, San Luis Obispo, to construct four concrete benches. In collaboration with faculty, concrete specialists, and the non-profit organization R.A.C.E. Matters, the project launched in Winter 2025. R.A.C.E. Matters initiated the effort by requesting the design and installation of benches at scenic, high-visibility locations managed by the San Luis Obispo Land Conservancy: Pismo Preserve, the Octagon Barn, and Kathleen’s Overlook. The full project scope included design development, structural calculations, prefabrication, on-site construction, and final installation. Each bench will serve as a …

Renovations At The Ranch Slo, Gerardo Valenciano-Valdivia

Construction Management

The Ranch SLO is a non-profit organization that hopes to aid adults with developmental disabilities by providing outdoor employment opportunities. In the ten-and-a-half-acre property, the employees engage in a variety of different activities, ranging from planting and growing different plants, to caring for farm animals. Some of the structures in the ranch have a long time in service and need reinforcing/renovations, this project focused on two main areas where renovations took place. The first area was a garden table area equipped with a total of 10 garden tables and a shade structure covering exactly half of the tables. The main …

Designing Augmented Reality (Ar) Simulations For Construction Scheduling Education: A Process-Based Approach, Luke Sutherland

Construction Management

This paper presents the design and implementation of an augmented reality (AR) testing protocol developed to assess construction students' planning, sequencing, and real-time decision-making skills. Using Microsoft HoloLens, the simulation exposed students to realistic jobsite scenarios that required them to interpret plans, develop task sequences, and respond to evolving conditions in the field. The protocol was conducted with over 30 construction management students at California Polytechnic State University, San Luis Obispo, and included three progressively complex scenarios focused on underground utilities, concrete formwork delays, and overhead MEP coordination issues. Data was captured through AR interaction logs, time tracking, instructor observation, …

R.A.C.E. Matters Precast Concrete Bench Construction, Jack Alexander Ritchie

Construction Management

This senior project details the collaborative design, fabrication, and installation of three precast concrete benches for the nonprofit organization R.A.C.E. Matters in partnership with the San Luis Obispo Conservancy. The benches were designed to act as platforms for public art, amplifying diverse racial narratives through murals. A multidisciplinary team of students from Construction Management, Architecture, and Architectural Engineering worked together, with each discipline contributing to distinct phases of the project. Bench installations took place at the Pismo Preserve, the Octagon Barn, and Kathleen’s Overlook. This paper reflects on the hands-on construction process, the challenges of interdisciplinary coordination, and the real-world …