Construction Engineering Commons^™

City Farm Slo - Market Stand Modernization, Juan Diaz

Construction Management

This paper analyzes the design, planning, and buildout of a custom multi-level stand, farm signage, and supporting equipment for the non-profit organization City Farm SLO. The overall goal of the project was to provide the farm with a modernized and functional market space. The project first addressed any owner design requirements, the approval of materials lists, and the assessment of existing conditions. The pre-construction consisted of developed drawings, materials lists, cost estimates, and a project schedule. Aside from setting up requirements, the owner provided specific milestones to be achieved during the construction phase of the project. A major risk found …

Caed Shop Entrance Wall Construction, Mason Neil Mitchell, Benjamin Joseph Rohrer

Architectural Engineering

This project involves the demolition and reconstruction of the CAED Support Shop Wall at Cal Poly, San Luis Obispo. The project was designed as a multidisciplinary project, combining architectural engineering and construction management students who collaborated on the rehabilitation of an existing structure. This project aimed to use “replication” as a means of historical preservation and restoration, specifically in the fabrication of custom CMU members.

Case Study: Cal Poly Housing Program (Cphp) - Student Housing Project At California Polytechnic University, San Luis Obispo, Aidan Michael Toole

Construction Management

Full volumetric modular construction is a building technique that involves the off-site prefabrication of three-dimensional modular units, which are later transported and assembled on-site. California Polytechnic State University in San Luis Obispo and general contractor, Whiting-Turner, are building new on-campus student housing by utilizing full volumetric modular construction techniques. The buildings will be produced in modules that, when put together, reflect the identical design and intent of a site-built building. This paper will analyze the effectiveness of modular construction on a large-scale project and look at the project cost, schedule, and waste impacts from choosing this approach. The main driver …

From Concept To Design: Managing The Development Of The Avi Ari Café At Quinta Mazatlán, Jose L. Tabarez Jr.

Honors Theses

The Avi Ari Café project represents a holistic approach to sustainable architecture and civil engineering, focusing on integrating environmental stewardship, energy efficiency, and community engagement. Located within Quinta Mazatlán, a wildlife preserves in McAllen, Texas, the café is designed to blend harmoniously with the surrounding ecosystem while offering visitors a modern, functional space. This thesis explores the design, construction, and operational strategies employed to minimize the environmental impact of the café, ensuring its sustainability both during construction and throughout its long-term operation.

The project is structured around several key objectives: reducing waste generation, conserving energy, utilizing sustainable materials, and promoting …

Rethinking Human-Autonomy Teamwork In The Context Of Design And Robotic Fabrication, Iremnur Tokac Celikyay, Caja Thimm, Sigrid Brell-Cokcan

Human-Machine Communication

The integration of autonomous agents in design is challenging due to its unstructured nature. The increasing focus on human-robot interaction (HRI) is driven by its potential to address this issue, enabling human-robot teams to effectively manage creative design tasks. This paper aims to identify interactive processes among the agencies of humans, robots, and materials. We explore how HRI can shift robotic fabrication from a linear deterministic process to an iterative co-creation one. Through reflective analysis of robotic fabrication studies, we illustrated how interaction interfaces can distribute agency among humans, robots, and materials while negotiating the design intent with material and …

Building Artificial Reefs From Recycled Construction Materials: A Feasibility Study, Nicholas H. Lew

Construction Management

Naturally occurring reefs are some of the world’s most biologically diverse ecosystems formed by jagged rocks tucked slightly below sea level. In recent years global warming began to pose a major threat to many reef habitats. Most relevant is the increase in surface seawater temperatures that cause coral to bleach, taking away major food sources for larger marine species. Researchers have combated this by deploying artificial reefs in substitution for naturally formed limestone rock formations in order to promote the expansion of coastal habitats. This project specifically aims to utilize construction waste towards the production of artificial reefs, effectively upcycling …

Shabang Music Festival Seating, Carter L. Norton

Construction Management

This outlines the process of the building and installation of four shaded seating areas at the SHABANG Music Festival located at Laguna Lake Park in San Luis Obispo. This paper places an emphasis on the pre-construction elements of the building stage. SHABANG Music Group rented out a section of Laguna Lake Park to host a music festival designed to bring the San Luis Obispo community together. The goal of the project discussed was to build a raised VIP seating area facing the main stage on which music lovers could relax while still being able to enjoy an unobstructed view of …

A Review Of Current Construction Guidelines To Inform The Design Of Rammed Earth Houses In Seismically Active Zones, David Thompson, Charles Augarde, Juan Pablo Osorio

Articles

Sustainability in the materials we use for construction is a prime concern, focusing on reducing the embodied energy and carbon footprints of the materials used. The cement used in concrete products is responsible for a significant proportion of Man's CO2 emissions and its production requires substantial energy input, as do fired clay products. For this reason, products formed from unfired earthen materials are of increasing interest and the current challenges include devising means of robust design for strength and to address durability concerns. One form of earthen construction that employs an in-situ method is rammed earth, and it is a …

Law School News: National Housing Advocate Named To Lead Rwu's New Real Estate Initiatives 02/08/2022, Roger Williams University School Of Law

Life of the Law School (1993- )

No abstract provided.

Construction Of An Apartment Building And Parking Garage, Kirsten Wilson, Kirsten R. Wilson

Honors College Theses

Construction projects are known far and wide to all people. Buildings we need for daily survival would not exist if it were not for the construction industry. Our homes, healthcare facilities, groceries, and other necessary amenities would be gone if it were not for the structures they are housed in. This project aims to simulate the lifespan of a construction job from the design phase to the preconstruction phase and stops at the final presentation before an agreement to start construction.

To create the simulation for the students, a fake RFP, or request for proposal, was created and given to …

Residential Bathroom And Tile Shower Addition During Covid-19 Quarantine, Joseph Szillinsky

Construction Management

This paper outlines the design and construction of a new code compliant bathroom including: a low profile shower pan, ceramic-tile shower enclosure, and new plumbing piping and fixtures. One of the main objectives was to complete the new shower which would be easily accessible and maintenance free in order to support a local elderly couple. The selection of this project took place during the COVID-19 pandemic approximately nine months after California issued the first mandatory statewide Stay-at-Home Order. During the early design and development stages an opportunity to collaborate with a local trades-person was identified as well as the need …

The Advantages Of Integrated Project Delivery (Ipd) Utilization In The Construction Industry Compared To Traditional Project Delivery Methods, Mert Oytun

International Programs

Today, primarily due to the development of information technologies, the Architecture Engineering and Construction (AEC) industry has the opportunity to realize its shortcomings more effortlessly. Typically, the most considerable difficulties are encountered in the performance measurements of projects in the AEC industry. The reason is that the AEC industry is highly fragmented, even though it involves various stakeholders that should be in uninterrupted communication throughout all phases of a project. This fragmented structure mainly causes (1)endless debates among the stakeholders, (2) schedule delays, and (3) profit losses. Hence, addressing projects’ productivity change regarding the utilization of different project delivery methods …

Buildings As An Assembly Of 3d Printed Components, Stephen S. Lauer

ASA Multidisciplinary Research Symposium

This project aimed to design a series of components that would be assembled to become a house. The design is a house that is printed in a series of modules and assembled using a series of printed connectors for not only attaching the modules but also used in other various details.

Green Building Rating Systems And The Role Of The Project Manager, Davis Ciprikis

Other Resources

Sustainable development has increased significantly over the last 10 years. Construction firms are adopting sustainable practices that come from both, internal and external drivers of the construction industry. In order to assess how sustainable a building is, a green building rating systems have been developed to provide a documented and systematic approach to sustainable construction practices. Amongst these rating systems are the Building Research Establishment Environmental Assessment Methods (BREEAM) introduced in the UK and the Leadership in Energy and Environmental Design (LEED) created in the USA. It has been noted that the project manager will have an important role to …

Building Fabric Design : Thermal Performance Standards, Joseph Little

Articles

This is the first of a series of articles using content from the new RIAI Building Fabric Design CPD which explores a range of themes of central importance to designing buildings that are highly energy efficient, genuinely compliant and perform to their design intent and specification. As the articles are short and the themes are often complex, they can be at best a short introduction to the issues raised. In this article we will look at the new minimum building fabric standards: these are far more onerous than much of the Industry understands.

Thermal Bridging - Understanding Its Critical Role In Energy Efficiency, Joseph Little, Beñat Arregi

Articles

Plane element heat loss[1] and thermal bridging[2] together constitute all the conduction heat loss (measured in W/K, watts per kelvin) through the thermal envelope[3] of a building. Perversely insulating the plane elements more and more without carefully dealing with junctions can lead to a significant increase in thermal bridging heat loss. This is often more significant in poorly thought-out energy-focused retrofits than in existing or new buildings.

Top Tips For Domestic Refurbishment, Joseph Little

Articles

1) It stands to reason that insulating a wall should not affect its strength or longevity, nor should it result in a buildup of moisture (inter-stitial condensation) or mould. However the Industry is currently gripped with a desire to insulate to the highest standard (U-value) at the lowest financial cost, as quickly as possible, with little thought of these issues. An appropriate, robust solution must take the original wall, the occupant’s health, the room’s function and even the building’s location into account.

Breaking The Mould 5 : Comparative Simulation Of Internal Insulation Systems, Joseph Little

Articles

In the last edition of Construct Ireland ‘Breaking the Mould IV’ established the standard that should be used to evaluate thermal upgrades of single leaf walls, described steps to physically prepare the wall, explained some of the mechanisms that affect the likelihood of mould and gave criteria for judging the simulations outputs. The next step is to simulate a number of permutations of typical internal insulation systems using WUFI Pro under IS EN 15026.

Leadership, Libraries, Leed For The Future, Kathryn S. Ames, Greg Heid

Georgia Library Quarterly

The article discusses the use of Leadership in Energy and Environmental Design (LEED) principles in the design of the modern public library. It is stated that an LEED-certified library will have lower costs in energy, systems replacement and maintenance through the use of light-emitting diode (LED) lighting and efficient heating and air conditioning, but that due to special materials, the up-front expense is higher. The inspection of the facility throughout its construction is also noted.

Breaking The Mould 3, Joseph Little

Articles

This article is the third in a series looking at thermal upgrades to single-leaf walls of existing houses. The theme for this article was intended to be an analysis of various drylining options for brick and rubble-built walls of older properties. That will follow. The following events forced a change in focus.

Breaking The Mould 2 : An Analysis Of Single-Leaf Insulation Upgrades, Joseph Little

Articles

This article is the second in a series looking at thermal upgrades to single-leaf walls of existing houses. It compares a range of ways of upgrading masonry single-leaf walls, particularly the ubiquitous hollow block wall, and the impact of those decisions on moisture content, wind- and airtightness, cost and heating. Future articles will look at various drylining approaches for a range of walls including brick walls of various widths.

Breaking The Mould 1 : A Study Of Condensation In Single-Leaf Concrete Wall Upgrades, Joseph Little

Articles

This article is the first of a series looking at upgrade options and issues associated with single-leaf walls of existing houses. This article will focus on insulated drylined concrete block walls of the ubiquitous housing estate house. This will include the findings of software that dynamically models moisture movement through the wall over several years. The article following this will look at a range of options for replacing existing drylining or installing drylining where it never was before, be that for a solid block wall of a 1950s house or a solid brick wall of an 1850s house.

In Transit - Transition Movement Inspires Dramatic Carbon Cuts In House Refurb, Joseph Little

Articles

Drawing on the ‘Energy Descent Action Plan’ he developed at Kinsale, Rob Hopkins and his team launched Transition Town Totnes (in the UK) one and a half years ago. 64 recognised transition communities and 600 other groups (and counting) are now in communication with Rob’s team to launch their versions of this initiative in their communities worldwide.¹ The Transition Ireland Network is coordinated by Davie Philip of Cultivate and several transition initiatives are underway here.

Frame It - Thoughts On Education, Reducing Carbon And Vapour, Joseph Little, Robbie Cousins

Articles

Joseph Little believes timber frame can be the backbone of a new generation of low-carbon, energy-efficient housing, and be used as an intelligent response to Climate Change and fuel prices. But he tells Robbie Cousins that timber frame manufacturers, suppliers and architects need to gear-up and work more closely together if the true potential of this vision is to be realised.

Joseph Little’s chief bugbear is poor construction standards & details on site and the core of this issue is how the knowledge set of architects and builders and how standards are controlled. The seeds of this idea may have …

Baugruppe - Lessons From Freiburg On Cooperative Housing : Lessons From Freiburg On Cooperative Housing, Joseph Little

Articles

Creating Sustainable Communities in the UK and Ireland

The Genesis of Quartier Vauban