Construction Engineering Commons^™

Wast3d Potential, Andrew Larsen

Masters Theses

Waste is obsolete. Standard building industry practices are harmful to the environment. Non-traditional construction methods were examined as alternatives. Circular design logic was the guiding principle in material choice. Additive manufacturing is a proven modern method for building construction. Research on 3D printing case studies revealed that recycled plastic is a proven material and readily available. Removing plastic waste from the environment and sequestering it in architectural components gives the material a new purpose. The component of focus was a building block for a wall assembly. Inspiration was taken from the hexagonal Basalt rock formations found near volcanic fault lines. …

Attainable And Sustainable Home Building Solutions, Katrina Matthews

Construction Management

Sustainability has fortunately been a recent concern in the construction industry as climate change continues to impose potentially insurmountable threats to the global environment. Although many new methods have been adopted in efforts to lessen the adverse environmental effects of construction-related activities, as a society, we still have much room for growth as the built environment accounts for almost 50% of global emissions. Many changes and standards must be adopted to make these solutions efficiently beneficial. To set industry standards, we must start with the most basic form of construction- residential building. This report covers two attainable framing solutions for …

Exploring The Potential Of Pavegen’S Kinetic Energy Generating Floor For Sustainable Energy Solutions: A Proposal For Cal Poly Slo, Brandon J. Cuneo

Construction Management

This paper proposes the installation of Pavegen's kinetic energy generating floors at Cal Poly’s campus as a sustainable energy solution. Pavegen has developed a pioneering technology that converts footsteps into clean and renewable energy. The versatility of these floors is demonstrated through successful implementations in various settings, such as transportation hubs and public spaces, generating power from foot traffic. Collaborations with Schneider Electric, installation at Dupont Circle, and integration at Heathrow Airport showcase the potential for sustainable urban infrastructure. This paper outlines research conducted on Pavegen and similar solutions, including communication with company representatives and examining proposed installation locations at …

Plastic Bottles In Architecture: A How To Guide On Life-Cycle Through Reuse, Crystallyne Landram

Architecture Undergraduate Honors Theses

This booklet is a collection of 6 case studies that utilize reused plastic bottles significantly within their design. Prior to working with the case studies, much time was dedicated to research that justified the need for such a project. In-depth research on the environmental crisis, waste management trends, stewardship, sustainability, and ethics was conducted and recorded in the introduction to contextualize the need for an accessible how-to guide such as this one. Time was also given to establishing background information on bottles, reprocessing, and architecture to elaborate further on each piece of the content matter. It is curated as a …

Electrochromic Windows: Return On Investment Analysis, Thomas Michael Caprio

Construction Management

In recent years, sustainability in construction has become a topic of undeniable interest. With sustainability certifications becoming more prominent and desirable, members of the construction industry have begun to seek alternatives for standard systems to keep up with market trends. One of the main issues that the construction industry faces is accessibility of technology. While there are new products and technologies being released frequently, members of the construction industry lack knowledge on the specific details and implications of working with newer systems. One piece of technology that was recently introduced is electrochromic glass, or smart glass. Electrochromic windows analyze sunlight …

Design, Development, And Characterization Of Highly Efficient Colored Photovoltaic Module For Sustainable Buildings Applications, Mohammad Khairul Basher, Mohammad Nur-E-Alam, Momtazur Rahman, Steven Hinckley, Kamal Alameh

Research outputs 2022 to 2026

The building integrated photovoltaic (BIPV) system is one of the contributors which has enormous potential to reach the goal of net-zero energy buildings (NZEB) that significantly reduce the use of fossil fuels that contribute to global warming. However, the limitations of the visual and aesthetic appearance of current BIPV systems make this aspiration unlikely. This study investigates the limitations of the single-color-based PV modules that are dull in appearance and have low photo-conversion efficiency (PCE). In order to solve this issue, we designed, developed, and characterized micro-patterned-based multicolored photovoltaic (MPCPV) modules which are applicable to net-zero building and development. Our …

Comparing The Environmental Impacts Of Using Mass Timber And Structural Steel, Khang Hoang Nguyen, Steelee Knight Morgan

Construction Management

Although mass timber has seen a gradual rise in demand in the past, there has been a lack of extensive research on the environmental impacts of using mass timber as a primary structural framing material. This paper compares structural steel, and mass timber’s total embodied carbon emissions. Accurate estimates were made using plans and specs for different projects retrieved from semi-structured interviews. The estimates were input through the EC3 Calculator to provide extensive total carbon emissions measurements between each construction material. Using structural steel framing increased the project’s overall environmental impact by roughly 84% compared to using mass timber. The …

Passive Cooling In Non-Residential Nearly Zero Energy Buildings: A Thermal Comfort Analysis Based On Measurement, Modelling And Simulation, Adam O'Donovan

Theses

Overheating in non-residential nearly zero energy buildings (nZEBs) presents a major risk to the well-being, productivity and thermal satisfaction of the people who occupy them. As global temperatures are expected to increase in the future, the overheating risk and cooling demand is also expected to increase. Therefore, low cost and low energy solutions that are able to maintain thermally comfortable conditions without the need for mechanical systems will be vital in decarbonising the building stock and ensuring that buildings are comfortable and remain low carbon now and in the future. Passive cooling has long been championed as a low cost …

Seeps And Springs At A Platteville “Observatory” On The River Bluffs, Bj Bonin, Greg Brick, Julia R. Steenberg

Sinkhole Conference 2015

Residential building construction along the Mississippi River bluffs in the 1970s created a unique enclosed outcrop of the Late Ordovician Platteville Formation at Lilydale, Minnesota. This outcrop was examined in early 2013 after a newly-formed spring flooded an elevator shaft the previous year, drawing attention to the foundation conditions. The Lexington Riverside property is a six story condominium complex constructed within the top of the bluff. A two-level underground parking garage was built into the bluff. Bedrock was mechanically excavated to accommodate the construction of the building, creating an unweathered rock surface. The space between the structure and the excavated …

Measuring Good Architecture: Long Life, Loose Fit, Low Energy, Craig Langston

Craig Langston

Good architecture is something that we all seek, but which is difficult to define. Sir Alexander John Gordon, in his role as President of the Royal Institute of British Architects, defined ‘good architecture’ in 1972 as buildings that exhibit ‘long life, loose fit and low energy’. These characteristics, nicknamed by Gordon as the 3L Principle, are measurable. Furthermore, life cycle cost (LCC) provides a method for accessing the economic contribution or burden created by buildings to the society they aim to serve. Yet there is no research available to investigate the connection, if any, between 3L and LCC. It might …

Syllabus: Solar Energy Systems And Building Design, Ho-Sung Kim

Sustainability Education Resources

This course introduces the fundamental concepts of solar building design and energy systems. Through project based study and possible field visits, students will explore the theory, technologies, applications, and benefits of solar design of buildings and discover how to utilize solar energy systems for residential and commercial buildings. Students will be required to research and document technology and complete a semester case study project in which they will examine various energy conservation aspects and economics underlying solar energy systems.

Speed And Resolution In The Age Of Technological Reproducibility, Shawn Taylor

Theses and Dissertations

The rate of acceleration of the biologic and synthetic world has for a while now, been in the process of exponentially speeding up, maxing out servers and landfills, merging with each other, destroying each other. The last prehistoric relics on Earth are absorbing the same oxygen, carbon dioxide and electronic waves in our biosphere as us. A degraded .jpeg enlarged to full screen on a Samsung 4K UHD HU8550 Series Smart TV - 85” Class (84.5” diag.). Within this composite ecology, the ancient limestone of the grand canyon competes with the iMax movie of itself, the production of Mac pros, …

Building Envelope For Energy-Efficient Residential Homes, A Case Study For The U.S. Department Of Energy Challenge Home Student Design Competition, Milica Tajsic

UNLV Theses, Dissertations, Professional Papers, and Capstones

With the continuous rise of population and expansion of urban areas, the need for additional housing and infrastructure is growing rapidly. Building sector is consuming a vast majority of the natural resources to meet the needs of urbanization and is in need of efficient, sustainable solutions that are viable for the customer, the economy and the environment. The building sector is both the problem and the solution to the issues of the carbon footprint of our society (Architecture 2030, 2011).

The envelope (roofs, walls, and foundations) and windows typically account for 36% of overall energy use, or about 14.3 quads …

Ogden College Of Science & Engineering Newsletter (Summer 2014), Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Evaluating The Benefits Of And Barriers To Building With Structural Insulated Panels, Alison E. Moynihan

Student Showcase

Changing climate and increasing costs of energy are putting pressure on the building industry to adapt to higher performance building systems. One technology that can improve building performance is structural insulated panel (SIP) construction. The purpose of my practicum is to evaluate the possible benefits of SIPs and to identify obstacles to SIPs gaining a larger portion of the building industry. Using the information from practicum I intend to evaluate current design tools and suggest my own tools. The benefits of SIPs are lower thermal bridging and air infiltration leading to lower operating costs and minimal material usage. Findings include …

Evaluation Of Phase Change Materials For Cooling In A Super-Insulated Passive House, Jeffrey Stephen Lauck

Dissertations and Theses

Due to factors such as rising energy costs, diminishing resources, and climate change, the demand for high performance buildings is on the rise. As a result, several new building standards have emerged including the Passive House Standard, a rigorous energy-use standard based on a super-insulated and very tightly sealed building envelope. The standard requires that that air infiltration is less than or equal to 0.6 air changes per hour at a 50 Pascal pressure difference, annual heating energy is less than or equal to 15kWh/m2, and total annual source energy is less than or equal to 120 kWh/m2. A common …

Benchmarking Public Private Partnership Environments: East Asian Comparisons, Michael Regan, Jim Smith, Peter Love

Michael Regan

The Public Private Partnerships (PPP) markets in Australia and the UK are considered to be the most sophisticated in the World and used as a model for benchmarking against other countries. In addition the global financial crisis also meant many PPP financiers became risk averse to certain projects and in particular countries. The environment for major infrastructure projects, particularly in ‘riskier’ countries, has become more difficult. Research conducted by the Economist Intelligence Unit for the Asian Development Bank evaluated PPP policy and programs in a number of countries in the Asia Pacific. The study benchmarks the UK and Australian PPP …

A Casual [Causal] Relationship Between Building Maintenance Market And Gdp: Hong Kong Study, Yong-Tao Tan, Liyin Shen, Craig Langston

Craig Langston

Purpose: The purpose of this paper is to examine the causal relationship between the building maintenance market and GDP in Hong Kong. Design/methodology/approach: The Granger causality test is used to investigate the lead-lag relationships between the maintenance and repair work and GDP in Hong Kong. With regression analysis, the future trend of the maintenance market is forecasted. Findings: The results show that the growth of the economy will lead to the growth of the maintenance market, not vice-versa. And the building maintenance market in Hong Kong will keep increasing with the economy growth. Originality/value: This paper shows that the growth …

Using Purchasing Power Parity To Assess Construction Productivity, Rick Best

Rick Best

For many reasons comparing construction productivity between countries is a difficult task. One key problem is that of converting construction costs to a common currency. This problem can be overcome relatively simply by using a basket of construction materials and labour, termed a BLOC (Basket of Locally Obtained Commodities), as a unit of construction cost. Average BLOC costs in each location are calculated from data obtained from a number of sources (quantity surveyors, estimators). Typical building costs obtained from published construction cost data are expressed in BLOC equivalents. Lower BLOC equivalents represent higher productivity as other inputs (largely materials) are …

Building Capability For Disaster Resilience, Lynn Crawford, Craig Langston, Bhishna Bajracharya

Lynn Crawford

All levels of government recognise the widespread devastation of communities by natural or other disasters. They have responded with emergency management arrangements and policies to enhance government and community capacity to anticipate, withstand and recover from disastrous events. Although the construction industry has a significant role to play, particularly in recovery and reconstruction, it has not generally been considered as a key stakeholder in building capability for disaster resilience. One barrier to more active involvement of the construction industry in disaster response and management is that traditional methods of construction project management have been criticised as too time consuming and …

Building Capability For Disaster Resilience, Lynn Crawford, Craig Langston, Bhishna Bajracharya

Craig Langston

All levels of government recognise the widespread devastation of communities by natural or other disasters. They have responded with emergency management arrangements and policies to enhance government and community capacity to anticipate, withstand and recover from disastrous events. Although the construction industry has a significant role to play, particularly in recovery and reconstruction, it has not generally been considered as a key stakeholder in building capability for disaster resilience. One barrier to more active involvement of the construction industry in disaster response and management is that traditional methods of construction project management have been criticised as too time consuming and …

Building Capability For Disaster Resilience, Lynn Crawford, Craig Langston, Bhishna Bajracharya

Bhishna Bajracharya

All levels of government recognise the widespread devastation of communities by natural or other disasters. They have responded with emergency management arrangements and policies to enhance government and community capacity to anticipate, withstand and recover from disastrous events. Although the construction industry has a significant role to play, particularly in recovery and reconstruction, it has not generally been considered as a key stakeholder in building capability for disaster resilience. One barrier to more active involvement of the construction industry in disaster response and management is that traditional methods of construction project management have been criticised as too time consuming and …

How Much Do U.S. University Students Know, And Want To Know, About Sustainability And Green Building? The Findings Of A Survey, And Possible Implications For General Elective Curricula., Jeremy R. Farner

Purdue Polytechnic Masters Theses

Using the survey approach, this investigation examined the attitudes and interest of college students at two universities in different geographic locations within the United States. Approximately 24,000 students from all disciplines and majors at Weber State University (WSU) in Utah, and 4,000 at Purdue University in Indiana, were invited to participate in a study to determine current knowledge, familiarity, and interest in topics within the sustainability and Green Building educational arena. The goal of this study was to determine what students already know, would like to know, and how much interest there would be in developing …

An Empirical Comparison Of Life Cycle Cost Of Green School Buildings And Non-Green School Buildings, Nitisha Pushpala

UNLV Theses, Dissertations, Professional Papers, and Capstones

One of the major economic concerns today of the world is reduction of energy consumption because of depleting energy sources in the world. The construction sector in the United States is also contributing in reducing the energy consumption and construction cost of the buildings by constructing cost and energy efficient buildings with energy efficient materials and techniques. The U.S Department of Energy introduced the Building Technologies Program that develops techniques, tools and technologies for making buildings more energy efficient. Other private bodies like the Leadership in Energy and Environmental Design (LEED), which is developed by the U.S. Green Building Council …

How Much Do U.S. University Students Know, And Want To Know, About Sustainability And Green Building? The Findings Of A Survey, And Possible Implications For General Elective Curriculum., Jeremy R. Farner

Purdue Polytechnic Masters Theses

Using the survey approach, this investigation examined the attitudes and interest of college students at two universities in different geographic locations within the United States. Approximately 24,000 students from all disciplines and majors at Weber State University (WSU) in Utah, and 4,000 at Purdue University in Indiana, were invited to participate in a study to determine current knowledge, familiarity, and interest in topics within the sustainability and Green Building educational arena. The goal of this study was to determine what students already know, would like to know, and how much interest there would be in developing …

Stochastic Hybrid Embodied Co2-Eq Analysis: An Application To The Irish Apartment Building Sector, Adolf Acquaye, Aidan Duffy, Biswajit Basu

Articles

Although embodiedCO2-eq analysis has seen recent developments as evident in the establishment of the ISO14040 and 14044 LCA standards, it is recognized that due to weaknesses in gathering data on product-related emissions,embodiedCO2-eq values are probabilistic. This paper presents a stochastic analysis of hybrid embodied CO2-eq in buildings to account for this weakness in traditional methods and, by way of example, applies it to an Irish construction-sector case study. Using seven apartment buildings, 70,000 results are simulated with Monte Carlo analysis and used to derive probabilistic and cumulative embodied CO2-eq intensity distributions for apartment buildings in Ireland. A Wakeby distribution with …

A Financial Impact Assessment Of Ld 1725: Stream Crossings, New England Environmental Finance Center, Muskie School Of Public Service

Water

This report looks at the potential financial impact of LD 1725 on the estimated 30,000 stream crossings in the State of Maine that would be affected by the law. Our research for this report included the analysis of nearly 2000 stream crossings and the data collection necessary for the development of extensive stream crossing replacement cost models. We found that the 1.2 bankfull requirements in LD 1725 would result in a 75% ‐ 250% increase in structure widths for stream crossing projects across the state. An upsize of this magnitude would increase the cost of replacing stream crossings statewide by …

Culvert Material Cost Comparison, New England Environmental Finance Center

Water

The following tables provide a detailed look at the role that culvert material and culvert diameter play in the overall cost of a culvert replacement project.

Culvert Material Cost Comparison, New England Environmental Finance Center

Economics and Finance

The following tables provide a detailed look at the role that culvert material and culvert diameter play in the overall cost of a culvert replacement project. Table 1 displays the cost per foot purchase price arranged by diameter size for the various culvert materials that are currently available. Table 2 displays the average additional culvert pipe material cost (increased cost to upsize minus original in-kind replacement cost) that would be incurred when upsizing a given diameter of culvert with a 50 foot length by factors of: 200%, 250% and 300%.

Construction Cost Models, Barry Dikeman

Economics and Finance

The following are a series of cost estimate models similar in format to a typical engineer’s estimate that were developed in support of our financial impact assessment report for LD 1725. The models us current material costs, labor costs, and equipment costs for the region to provide a comparative cost analysis of seven culvert replacement scenarios. The models provide information about what the cost impact of LD 1725 would be for typical culvert replacements in Maine. However, due to the inherent restrictions of the cost modeling framework we were not able to include the abundance of variables that would be …