Construction Engineering Commons^™

A Systematic Literature Review Exploring The Barriers To Innovative Modular Construction Methods For The International Hyper-Scale Data Centre Sector, Peter E. Lonergan, A.Omar Portillo-Dominguez

Other

Data centres form the essential global infrastructure relied upon for multiple industries such as the internet, financial services, and telecommunications. Consequently, data centre construction has developed into a buoyant business sector, leveraging increasing global investment. However, traditional means of data centre procurement do not match stakeholder’s ambitions or current delivery demands. Thus, there is a need for the adoption of new and innovative construction methodologies in the sector to introduce improvements for the delivery of this essential infrastructure. As a step in that direction, this paper presents a Systematic Literature Review (SLR) that investigates the barriers preventing the implementation of …

Impact Of Covid-19 On The Diversity Of The Construction Workforce, Anil Baral, Yunping Liang, Mingshu Li, Marilyn Gonzalez, Mohsen Shahandashti, Baabak Ashuri

Durham School of Architectural Engineering and Construction: Faculty Publications

Construction industry employment has been severely impacted by the coronavirus (COVID-19) pandemic. This paper examines the impact of the COVID-19 pandemic in the US construction labor market. This study contributes to the state of knowledge by (1) revealing how the COVID-19 pandemic impacted construction employment across different demographic groups and geographic regions in the US, and (2) identifying vulnerable demographic groups (e.g., minorities, women, older workers) in the construction workforce that are disproportionally impacted by the pandemic. Employment data from the Current Population Survey and Current Employment Statistics (CES) programs, which are administered by the Bureau of Labor Statistics, are …

Tilt-Up Partially Composite Insulated Wall Panels, Marc Maguire, Salam Al-Rubaye

Durham School of Architectural Engineering and Construction: Faculty Publications

This research project was initiated to investigate the behavior of load-bearing concrete insulated wall panels for use in tilt-up construction. The primary objective was to understand the inelastic behavior of these panels so that engineers could perform a proper second-order analysis for combined axial and out-of-plane loading. Toward this aim, the Tilt-up Concrete Institute (TCA) and wythe connector suppliers Innstruct, Thermomass, HK Composites, Dayton Superior, and IconX, funded this study.

This report contains information related to testing of solid and partially composite insulated wall panels that integrated proprietary wythe connection systems. Using the information from these tests, a method to …

Challenges And Enabling Features Of Small And Medium Infrastructure Public-Private Partnerships (P3s): A Case Study Of The Us P3 Infrastructure Market, Yunping Liang, Baabak Ashuri

Durham School of Architectural Engineering and Construction: Faculty Publications

Purpose: In classical perspective, projects under a certain size are not feasible for P3. However, there is an emerging trend on using P3 to deliver projects that are frequently small to medium sized to meet ever-increasingly complex social needs, including enhancing lifecycle performance of existing facilities, designing and building for resilience and sustainability, ensuring cost effectiveness of public spending, and fostering innovation. In contrast with the increasing implementation, small and medium P3s, especially those in the United States, receive little attention in existing studies. This study aims at answering the question: in the context of the US, what features of …

Affordable And Sustainable Housing, Brandon Gibson

Williams Honors College, Honors Research Projects

Due to the current state of the world, families around the world have started to invest in their homes. This change in lifestyle has caused the average cost to build a new home to increase to nearly $300,000, with an additional $35,872 due to the pandemic-related uptick in material costs. Custom homes take an ample amount of planning, construction time, along with excessive amounts of materials. I am looking to put my spin on a recent trend that allows an efficient construction timeline, along with the reduction of materials and waste.

Shipping Containers. Though their history of utilization has solely …

Building Services Engineering January/February 2022

Building Services Engineering

No abstract provided.

Analysing Bim Implementation In The Egyptian Construction Industry, Ayman Ahmed Ezzat Othman, Mohamed Marzouk, Heba Elsaay

Architectural Engineering

Purpose – This research is built up upon exploring the concepts of building information modeling (BIM) adoption and strategy formulation with the aim to develop a strategy for implementing BIM in the Egyptian construction industry. Design/methodology/approach – The development of the BIM implementation strategy was based on two pillars, namely the literature review and results of the survey questionnaire and interviews. First, the review of literature helped investigating the BIM challenges and international strategies developed to implement BIM worldwide. Findings – The research presented recommendations to assist policymakers in Egypt to facilitate BIM implementation. Originality/value – Although multiple frameworks have …

Risks Of Innovation In The Architectural Design Process In Egypt: An Investigative Study, Rawan Medhat, Ayman Ahmed Ezzat Othman

Architectural Engineering

Achieving sustainability in construction projects is becoming an increasing priority worldwide. Being one of the crucial phases of the construction process, the design process plays a major role in achieving the goals of sustainability. Adopting innovative design solutions is a promising way of enhancing the sustainable performance of buildings. However, the implementation of innovative solutions is risky and needs to be managed carefully to avoid failure. Due to the increasing number of construction projects being developed in Egypt and because of the need to achieve the Sustainable Development Strategy (SDS) 2030, adopting innovative solutions became an essence. Accordingly, this research …

Exploring The Effects Of Chip Flexibility On The Behavior Of Standing Seam Diaphragms To Brace Cold Formed Steel Purlins, Michael W. Seek

Engineering Technology Faculty Publications

Cold-formed steel C- and Z-shaped purlins in standing seam roof systems rely on the diaphragm action provided by the panels to restrain lateral movements and thus increase the load carrying capacity the purlins. The clip connection between the purlin and the panel has inherent and sometimes intentional flexibility designed to accommodate thermal deformations. The lateral deformation behavior of standing seam systems supported by Zees is highly nonlinear and this behavior is not well understood. The flexibility has major implications on the transfer of diaphragm forces throughout these systems and simplified models often grossly overpredict the demands on the diaphragm and …

Transdisciplinarity In Experience Design: A Global Survey Of Higher Ed Programs In Exd/Xd, Yvonne Houy

Creative Collaborations

In our age of ubiquitous devices and digital media it is the perceived value of the end-to-end experience that brings people to a place. Designing inspiring and emotionally engaging end-to-end experiences requires experts in a wide range of disciplines committed to an interdisciplinary collaboration that can arrive at transdisciplinary design - the sum becomes greater than its parts.

Civil engineering, hospitality, business, psychology, digital User Experience (UX) design, and experience data analysis need to be seamless integrated with the fine and performing arts and design fields:

• Architecture, interior, landscape and sound design actively engage the senses.

• Graphic and fine arts …

  ---

  Go to article

A Time For Triage, Michael B. Gerrard

Faculty Scholarship

The world is desperately behind in the energy transformation needed to avoid the worst impacts of climate change. Catching up requires a massive buildout of wind and solar power and associated infrastructure, but in the United States many impediments stand in the way. Among them, ironically enough, are environmental laws. Here I argue that we must accept difficult tradeoffs, sacrificing some of what we consider precious in order to avoid far worse impacts.

Framework For Enhanced Applicability Of The Egyptian Public Procurement Law To International Administrative Construction Contracts, Amr Abu Helw

Theses and Dissertations

Local governments and public authorities conclude contracts for the purpose of acquisition of goods, delivery of services and construction of public facilities like bridges, infrastructures and public buildings. A public contract is an agreement to perform particular tasks financed by government funds to the benefit of the whole community. Private entities and corporations are subject to stricter standards in their dealings with the government than in private transactions. Conversely, the government must deal fairly and equitably with those who it contracted with to achieve successful implementation of the projects. On October 3, 2018, a new Egyptian public procurement law, namely, …

Teaching Tools For The School Of The Built Environment, Benjamin Laurance Kaufman

Honors Projects

The goal for this honors project was to better the architecture program at Bowling Green State University. Currently, one of the challenges the program faces is a lack of knowledge/understanding about how the built environment is constructed. This project helped to fill that knowledge gap by creating learning/teaching tools that will benefit future classes of architecture students. This project was the result of an interdisciplinary study among the architecture program and the construction management program at Bowling Green State University.

Investigating Project Success Factors In Post-Disaster Rebuilding Efforts In Nyc, Aalaa Mohammed, Jude R. Vallon, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including damage to 69,000 residential units. A precipitated amount of roughly $4.2 billion in Community Development Block Grant was allocated towards PDR construction. These funds addressed a range of needs, including rebuilding and rehabilitating housing, assisting displaced tenants, and providing aid to businesses. Post-Disaster Rebuilding (PDR) is similar to construction in the modification of an existing facility that involves either renovation, additions, or subtractions to scopes of work to assist the overall performance of the facility. However, PDR goes further in a highly coordinated …

Nasa, Boeing, And Defense Activities: For The Use Of Geopolymers For Space Construction, Terrance E. Bisnauth, Julio Martinez, Saim Wasim

Publications and Research

Good day readers. And with the rate at which our planet earth is being destroyed due to climate change and other catastrophe. That has created serious peril. Food shortages would soon be manifested. So it is wise for us being homosapiens occupy other places to live. And for this to be successful materials would play a significant role for housing us. One of which are Geopolymers.

Hurricanes And Housing: Highlighting The Ongoing Impact Of Hurricane Michael And The Post-Disaster Housing Problem, Mary Beth Barr

Architecture Undergraduate Honors Theses

Hurricanes impact individuals and communities on many levels - emotional, physical, mental, financial - to name a few. Every time a hurricane occurs, lives are drastically altered forever. One of the ways that hurricanes impact individuals and communities most powerfully is through the effect that they have on housing. Unleashing uncontrollable damage to infrastructure and the built environment, hurricanes exacerbate housing problems that exist and create new ones where they did not exist before. Hurricane Michael, which catastrophically impacted the Florida Panhandle in 2018, is a case study in which the impact that hurricanes have on housing is prevalent.

By …

Higher Sound Levels In K-12 Classrooms Correlate To Lower Math Achievement Scores, Laura Caroline Brill, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Sound levels from occupied classrooms have been gathered from 220 classrooms across four grade levels (3, 5, 8 and 11) over six school days each and processed with k-means clustering into speech and non-speech clusters. Three metrics describing the classroom acoustics, including the average daily A-weighted equivalent level for non-speech, the average daily difference between the A-weighted equivalent levels for speech and nonspeech (a signal to noise ratio), and the mid-frequency averaged reverberation time, were analyzed against classroom-aggregated standardized reading and math achievement test scores, while controlling for classroom demographics including socioeconomic status. Interactions between the metrics and demographics were …

Building Services Engineering November/December 2021

Building Services Engineering

No abstract provided.

The Effects Of The Visual Environment On K-12 Student Achievement, Michael Kuhlenengel, Iason Konstantzos, Clarence E. Waters

Durham School of Architectural Engineering and Construction: Faculty Publications

The varying indoor environments among educational buildings can have an impact on students’ ability to learn. This study looks at field data from 220 classrooms in the Midwest, United States, over a two-year period, to analyze the effects of the visual environment on student achievement. The visual environmental metrics considered within this scope include the three new view metrics introduced within the EN 17037 “Daylight of Buildings” standard (Horizontal Sight Angle, Outside Distance of View, and Number of View Layers), as well as standard daylight and electric lighting metrics, focusing on light availability and glare. To capture student achievement, math …

Construction Of An Apartment Building And Parking Garage, Kirsten Wilson, Kirsten R. Wilson

Honors College Theses

Construction projects are known far and wide to all people. Buildings we need for daily survival would not exist if it were not for the construction industry. Our homes, healthcare facilities, groceries, and other necessary amenities would be gone if it were not for the structures they are housed in. This project aims to simulate the lifespan of a construction job from the design phase to the preconstruction phase and stops at the final presentation before an agreement to start construction.

To create the simulation for the students, a fake RFP, or request for proposal, was created and given to …

The Professional Constructor, Full Issue, Volume 46, Number 02

The Professional Constructor

No abstract provided.

Twisted Buildings: Concepts And Approaches, Amani Marmar, Sally Zouia, Sahar Ismail, Ahmad Hallik

Architecture and Planning Journal (APJ)

With the emerging of new technologies, the look for more sustainable towers appears. Through designing twisted towers, an aerodynamic and energy efficient structure can be made to reduce materials and wind loads towards it. By definition, a twisted building is one that has gradually rotating floor plates along its height. The problem here rises due to the risk of structural failure and lack of load transfer and unorganized interior function. Thus, this research aims to detect the design solutions used to execute the twisted buildings achieving stability, safety, and withstanding climatic effects. In order to accomplish the mentioned aim, the …

Potentials Of Containers In Creating Modular Architectural Spaces, Karim Al-Khatib, Jinan Makkawi, Ali Kobeissi

Architecture and Planning Journal (APJ)

Containers are currently considered as one of the inventive trends of framing architectural objects. Container architecture is defined as the type of architecture that is characterised by the usage of steel containers as a structural elements and architectural envelope that can be presented as a part of architecture or a function that an activity can happen in it. Due to the specific dimensions that the container has, architects tend to use it to obtain modularity in their projects and the modular design strategies refer to using the containers as a standard unit to carry out the process, these containers are …

3d Printed Concrete & Polymer Concrete For Infrastructure Applications, Daniel Heras Murcia

Civil Engineering ETDs

Additive manufacturing technology has been established as one of the fastest-growing building technologies worldwide. Three-dimensional concrete printing (3DCP) has developed an increasing interest in the last decade due to its prospects as a transformative technology for industries such as the concrete precast. Besides the improvements in automation technologies in construction, traditional construction has faced considerable challenges: high accident rates, labor dependency, significant potential for automation, and high costs associated with the use of traditional formwork. In this context, three-dimensional concrete, also referred to as physical prototyping, is a novel construction technique in which the concrete is extruded layer-to-layer. 3DCP is …

Simulation For A Mems-Based Ctrnn Ultra-Low Power Implementation Of Human Activity Recognition, Muhammad Emad-Ud-Din, Mohammad H. Hasan, Roozbeh Jafari, Siavash Pourkamali, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper presents an energy-efficient classification framework that performs human activity recognition (HAR). Typically, HAR classification tasks require a computational platform that includes a processor and memory along with sensors and their interfaces, all of which consume significant power. The presented framework employs microelectromechanical systems (MEMS) based Continuous Time Recurrent Neural Network (CTRNN) to performHAR tasks very efficiently. In a real physical implementation, we show that the MEMS-CTRNN nodes can perform computing while consuming power on a nano-watts scale compared to the micro-watts state-of-the-art hardware. We also confirm that this huge power reduction doesn’t come at the expense of reduced …

A Proposal To Harmonize Bim And Iot Data Silos Using Blockchain Application, Zulkefly Abu Bakar, Malachy Mathews Dr

Conference papers

The integration of Building Information Modelling (BIM) and Internet of Things (IoT) provide significant end-to-end benefits for the architecture, engineering, construction, and operations (AECO) industry. Example applications include on-site assembly services, data localization for built environment, occupancy performance measures and many other analyses that can be used to improve the built environment. However, silos in the BIM and IoT data exchange have impacted the digital process adoption in AECO industry, which aims to change the dynamics and behaviors of the current working process. Penzes, (2018) in his report, acknowledges the AECO industry as one of the most fragmented sectors with …

Framework To Develop Time- And Voltage-Dependent Building Load Profiles Using Polynomial Load Models, Andrew Parker, Mhd Anas Alkrch, Kevin James, Ahmad Almaghrebi, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

The power consumption of buildings over the course of each minute, hour, day and season plays a major role in how this load influences the Electric Power System voltage and frequency, and vice versa. This consumption is based on the building's load component types, efficiencies, and how they consume power and react to changes in real time. Due to this complexity, standard full-building load models are typically voltage-invariant. This paper proposes a novel framework to transform these voltage-invariant building load models into fully time- and voltage-dependent load profiles using available data on the voltage sensitivity of individual load components. While …

A Case Study To Quantify Variability In Building Load Profiles, Andrew Parker, Sam Moayedi, Kevin James, Dongming Peng, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

Recent technology development and penetration of advanced metering infrastructure (AMI), advanced building control systems, and the internet-of-things (IoT) in the built environment are providing detailed information on building operation, performance, and user's comfort and behavior. Building owners can obtain a wide range of energy consumption details at various levels of time granularity to augment their decisions as they manage the building operation and interact with the grid. AMI data are providing a new level of detail and visibility that may enhance building services and assets in the smart grid domain and make buildings inch closer to becoming a grid-interactive energy …

Introduction To Prefabrication And Automation In Construction, Luciana Debs, Jiansong Zhang, Yunfeng Chen

Bowen School of Construction Open Educational Resources

New developments and recent advances in construction methods have the potential to change the future of the architecture, engineering and construction industry. Prefabrication, along with modular construction, provides a safe and controlled environment for the production of building construction elements and raises the need for improved collaboration and coordination from design to manufacturing and from transportation to final assembly. Prefabrication also provides relief from the skilled construction labor shortage while opening up new opportunities for mass customization within the building industry. Prefabrication and modular construction automation are emerging expansion routes for the construction industry. In addition, integral to developing the …

Building Services Engineering September/October 2021

Building Services Engineering

No abstract provided.