Construction Engineering Commons^™

Building Services Engineering September/October 2023

Building Services Engineering

No abstract provided.

Ua12/2/1 College Heights Herald: Our Changing Hill, Wku Student Affairs

WKU Administration Documents

Magazine edition of the College Heights Herald for the period September 5 - October 4, 2023.

• Anderson, Alexandria. Letter from the Editor – Change
• Dobberstein, Molly: The Hill Going Forward: Campus Changes & Improvements
• Anderson, Alexandria. WKU Innovation Campus Rethinks Business Development
• Reed, Bailey. New Courses on the Hill – Child Welfare, Mock Trail, Disability in US
• Murray, Debra. I Feel Really Lucky – Katherine Lennard
• Stone, Damon. Photojournalism Program to Change Curriculum

Construction Aspects And Seismic Analysis Of Typical Buildings In Dolpo, Lhakpa Tsering

Independent Study Project (ISP) Collection

This study delves into the construction aspects and seismic analysis of typical buildings in the challenging terrain of Dolpo, situated within the Himalayan mountain range. Dolpo's unique geological and geographical characteristics, combined with its susceptibility to seismic activity, make it crucial to investigate and understand the dynamics of construction in this remote region. The research explores traditional and contemporary building practices, aiming to elucidate the interplay between construction methodologies and seismic resilience. Through a comprehensive examination of the geological context, structural design, and seismic vulnerability, this study contributes valuable insights to inform the development of robust and earthquake-resistant building strategies …

The Professional Constructor, Full Issue, Volume 48, Number 01

The Professional Constructor

No abstract provided.

Lean Thinking As An Approach For Improving Client Communication During The Design Process, Ayman Ahmed Ezzat Othman, Ghada N. Mossad, Nishani Harinarain

Architectural Engineering

Lean thinking is perceived as a successful strategy for saving time and cost, while improving at the same time the position in the market. Lean thinking is about eliminating waste and increasing the quality. When applied correctly, lean thinking is a well understood and well examined platform upon which to build firm practices. In the architectural profession miscommunication has a lot of consequences including time and cost overruns, conflict and ultimately project failure. The aim of this research was to investigate the role of lean thinking in improving the communication between the client and the architect during the design process. …

Integrated Project Delivery (Ipd): An Innovative Approach For Achieving Sustainability In Construction Projects, Ayman Ahmed Ezzat Othman, Ghada Adel, Nishani Harinarain

Architectural Engineering

In spite of the positive impact construction can have on the economy and society in general, the industry is being blamed for the negative impact it has on the environment. This problem can be attributed to traditional procurement approaches adopted in construction industry and the inability to handle the different challenges regarding waste generation and pollution of the environment. This paper focused on the role of construction procurement as a method to achieving sustainability. This paper aims to investigate the role of integrated project delivery (IPD) in achieving sustainability in construction projects. In order to achieve this, aim the research …

An Investigation Into Ireland’S Bim Skills Gap, Guadalupe Centanni, Barry Mcauley

Conference Papers

The adoption of digital skills within the Irish AEC Sector has the potential to enhance efficiency and competitiveness among its stakeholders. Despite this opportunity, there is still a high demand for skilled BIM professionals, which cannot be currently met. To meet this skills demand and directly target future skills gaps within Ireland, several challenges must be addressed to facilitate broader BIM adoption. This paper focuses on addressing this gap by identifying steps to be followed to develop skilled professionals within BIM. This has been achieved by investigating the extent to which construction stakeholders in Ireland comprehend BIM and, examiningthe training …

Accelerating Bim Adoption In Ireland: A Ten-Year Review Of Cita Bim Gathering Proceedings, Alan Hore, Roger West, Barry Mcauley

Conference Papers

Digital construction interfaces have been studied extensively over the last few decades, with an ever-grow- ing catalogue of publications. The CitA BIM Gathering conferences have played a key role in bringing together the research and industry communities ina collaborative setting over the past decade in Ireland. In this paper the authors systematically review 10 years of papers published in the BIM Gathering pro- ceedings since the inaugural conference in 2013. A total of 175 papers involving over 200 authors have been reviewed and classified under the 2018 World Economic Forum (WEF) recommendations in respect to ac- celerating BIM adoption. The …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Analysis Of Factors Affecting Construction And Demolition Waste Reduction In Egypt, Ayman Ahmed Ezzat Othman, Ahmed Osama Daoud, Obas John Ebohon, Ali Bayyati

Architectural Engineering

Construction projects are associated with construction and demolition waste (CDW) generated at different stages. In Egypt’s case, the CDW problem has become a significant challenge, and the need to find sustainable solutions is overwhelming. Based on recent investigations in the literature, it was found that six main factors are affecting CDW reduction (CDWR) as follows: (1) waste-efficient materials procurement measures; (2) waste-efficient materials procurement models; (3) green materials procurement approach; (4) legislation; (5) culture & behaviour; and (6) awareness. In this study, a representative sample of Egyptian construction firms was screened to (1) investigate the applicability and effectiveness of CDWR …

Skills Matter – Up-Skilling Across Construction Stakeholders For Emerging Roles, Avril Behan, Paul Mccormack, Barry Mcauley

Conference Papers

The EU’s Climate Target Plan To 2030 (European Union 2020b) of achieving at least 55% reduction in Green House Gas emissions from 1990 levels, delivering towards a climate-neutral economy by 2050, requires systems-level change in the way we design, construct, and operate our built assets. Funding initiatives, such as co-ordinated by BUILD UP Skills, aim to deliver upskilling to the market but targets set by the European Skills Agenda may not be reached at current achievement levels. This paper presents the results of one completed and the progress of one ongoing Horizon 2020 funded project, BIMcert and ARISE, respectively. Learning …

Ten Questions Concerning Smart And Healthy Built Environments For Older Adults, Sanjay Kumar, Samuel H. Underwood, Julie L. Masters, Natalie A. Manley, Iason Konstantzos, Josephine Lau, Ryan Haller, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

In the past decade, the term ‘global aging’ has gained much attention among researchers, policymakers, civil societies, and governments worldwide. The continuous decline in fertility rates and increased life expectancy have resulted in an ongoing demographic transition where the share of adults aged 65 or older is increasing and outnumbering children younger than five years. In the United States and other developed countries, this rapid demographic transition is expected to continue to strain the existing health infrastructure as it becomes increasingly challenging to ensure healthy living environments for older adults. The ten questions and answers in this paper have been …

Exploring The Necessity Of Technology In Architectural Design: Moving Beyond Showcasing, Ertunc Hunkar

All Theses

Advancements in technology, particularly computational design tools, have transformed the field of architectural design. However, it is crucial to evaluate the impact of technology on the core principles of problem-solving and the design process within architecture. This study aims to examine the consequences and opportunities associated with the integration of technology in architectural design, focusing on the necessity of maintaining a strong problem-solving foundation. Architectural problem-solving involves spatial organization, functional requirements, contextual integration, and user experience. These principles guide architects in addressing design challenges and achieving successful outcomes. The design process comprises stages such as research, analysis, concept development, and …

The Extent Of Drone Education Being Taught In Asc Schools To 4-Year Construction Students, Cheran Teja Dumpati

All Theses

The technology of Unmanned Aircraft Systems (UAS) is growing rapidly in many fields and has become one of the skills in demand in the industry. Universities are one of the primary sources of teaching drone technology with a career-oriented approach. The goal of this study is to investigate the content of the drone curriculum being taught in Associated Schools of Construction (ASC) schools. This includes the topics covered, practical training offered, and the key deliverables taught. This information serves as a foundation for the schools that are looking forward to start drone courses in their department. The research found that …

Healthcare Built Environment And The Covid-19 Pandemic, A Mixed-Method Study, Mohammad Saleh Nikooopayan Tak

All Theses

The outbreak of COVID-19 presented an unparalleled risk to public health, leading to urgent scientific efforts in understanding transmission mechanisms and mitigating risks, especially in healthcare settings. This mixed-methods study examines knowledge advancement regarding indoor air quality in healthcare facilities during the pandemic. A systematic literature review of 163 post-COVID studies identifies key research thrusts and 31 recommendations related to building ventilation, air filtration, surface disinfection, and monitoring. Comparison with over 200 pre-pandemic publications reveals both reliance on established infection control principles and unique contributions, such as detecting viral RNA in air and surface samples indicating potential airborne and fomite …

Building Services Engineering July/August 2023

Building Services Engineering

No abstract provided.

Building Envelope Retrofits For Achieving Thermal Comfort In Naturally Ventilated Buildings In Future Climates: A Case Study Of Social Housing In Egypt, Donna Nader Kamel Ebeid

Theses and Dissertations

Envelope thermal insulation has a significant impact on a scale from global to individual interest. It contributes to indoor thermal comfort, provides economic benefit through reduced electricity bills, increases energy efficiency of buildings through reduced energy consumption, and protects against the change in Earth’s climate through reduced greenhouse gas emissions. In 2021, building operations accounted for 30% of global energy consumption, 27% of annual global CO₂ emissions and 35% of building energy use accounted for electricity consumption which is used to create comfortable indoor living conditions. In Egypt, electricity consumption in residential sector has been steadily increasing, among other …

Toward Low Carbon Footprint And Lightweight Masonry Alkali-Activated Material, Zina Ebrahim, Mohammad Mastali, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

The portland cement concrete industry and the masonry industry are undergoing changes in response to skilled labor shortages and concerns over climate and pollution. There may be interest from parts of the industry in lower carbon footprint and lightweight masonry products. Toward this aim, the use of hemp shiv--the woody core of the hemp plant--in alkali-activated concrete was investigated herein and shown to have a wide range of impacts on the hardened state characteristics of a material suitable for structural concrete masonry units (CMUs) in accordance with ASTM C90 requirements. Hemp shiv is well known for its use in hempcrete, …

Sustainable Seismic Architecture: Exploring The Synergy Of Mortise-And-Tenon Joinery And Modern Timber Construction For Reducing Embodied Carbon, Cong Li

Masters Theses

Abstract

This design thesis explores the potential of combining ancient Mortise-and-Tenon joinery techniques with modern timber construction to create sustainable seismic architecture that simultaneously reduces embodied carbon. By studying the enduring qualities of Mortise-and-Tenon structures and their ability to withstand earthquakes, this research uncovers a synergistic relationship between traditional joinery methods and contemporary building materials, unlocking significant opportunities for embodied carbon reduction ranging from 7 to 40% compared to other modern architecture construction.

The research reveals that Mortise-and-Tenon structures commonly incorporate large roof systems, acting as mass dampers that provide flexibility and distribute weight evenly to columns. By transferring the …

Wast3d Potential, Andrew Larsen

Masters Theses

Waste is obsolete. Standard building industry practices are harmful to the environment. Non-traditional construction methods were examined as alternatives. Circular design logic was the guiding principle in material choice. Additive manufacturing is a proven modern method for building construction. Research on 3D printing case studies revealed that recycled plastic is a proven material and readily available. Removing plastic waste from the environment and sequestering it in architectural components gives the material a new purpose. The component of focus was a building block for a wall assembly. Inspiration was taken from the hexagonal Basalt rock formations found near volcanic fault lines. …

Incentivizing Electric Vehicle Adoption Through State And Federal Policies: Reviewing Influential Policies, Joshua Sabata, Subhaditya Shom, Ahmad Almaghrebi, Anne Mccollister, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

All-electric vehicles (EVs), battery-powered EVs (BEVs), and plug-in hybrid EVs (PHEVS) are gaining market share and increasing in popularity with the buying public because the battery range (longer) and cost (lower) have reached sweet spots, the charging infrastructure is more robust, and concern with global cli­mate change is high. In 2013, only 100,000 EVs were sold in the United States, but by 2022, approximately 800,000 have been purchased. A similar growth is seen in EV sup­ply equipment (EVSE), i.e., EV charging stations, with 19,742 documented EV charging station locations in the United States in 2013 to 50,054 documented EV charging …

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Exploring The Potential Of Pavegen’S Kinetic Energy Generating Floor For Sustainable Energy Solutions: A Proposal For Cal Poly Slo, Brandon J. Cuneo

Construction Management

This paper proposes the installation of Pavegen's kinetic energy generating floors at Cal Poly’s campus as a sustainable energy solution. Pavegen has developed a pioneering technology that converts footsteps into clean and renewable energy. The versatility of these floors is demonstrated through successful implementations in various settings, such as transportation hubs and public spaces, generating power from foot traffic. Collaborations with Schneider Electric, installation at Dupont Circle, and integration at Heathrow Airport showcase the potential for sustainable urban infrastructure. This paper outlines research conducted on Pavegen and similar solutions, including communication with company representatives and examining proposed installation locations at …

Attainable And Sustainable Home Building Solutions, Katrina Matthews

Construction Management

Sustainability has fortunately been a recent concern in the construction industry as climate change continues to impose potentially insurmountable threats to the global environment. Although many new methods have been adopted in efforts to lessen the adverse environmental effects of construction-related activities, as a society, we still have much room for growth as the built environment accounts for almost 50% of global emissions. Many changes and standards must be adopted to make these solutions efficiently beneficial. To set industry standards, we must start with the most basic form of construction- residential building. This report covers two attainable framing solutions for …

City Farm Slo Educational Pizza Oven, Koby J. Ramage

Construction Management

City Farm SLO is a nonprofit that educates the public about growing food, and they donate the produce to food banks and communities in need. Their mission is to promote healthy living through sustainable agriculture and farm-based education. This senior project is to build them an educational pizza oven for them to use in their classes. With it they will give lessons where they cook pizzas using ingredients that they grow on site. To do this, the builder had to make it lightweight and able to move around the property to different meeting places and outdoor classrooms. It is also …

The Viability Of Electrification For Industrial Off-Road Vehicles In Construction, Caden Patrick Stoker

Construction Management

Federal and State legislation has been passed limiting the prospective propulsion options for heavy industrial off-road vehicles that general contractors can operate on the jobsite. The interest behind this research project is the viability of introducing fully electric off-road construction vehicles into the heavy civil construction industry and if the timeline for implementation is realistic or optimistic. As new rules and regulations pertaining to the future emissions requirements of civilian and commercial vehicles effect the country, the construction industry is spending billions in order to develop (and are currently developing) fully electric off-road industrial vehicles (dozers, front loaders, scrappers, dump …

City Farm Slo Garden For All Accessible Planter Beds, Allison C. Wild

Construction Management

This paper outlines the design, coordination, and construction efforts to build the Accessible Planter Boxes for the City Farm SLO’s Garden for All. The Garden for All was a concept created by the City Farm SLO staff to meet the need for an accessible learning space for students. The full design for the Garden for All also included mobile benches and tables, a shade structure, and decomposed granite pathways that were completed by other students. This project included the construction of 6 raised planter beds of differing heights and designs. Each planter bed was approximately 10 feet long and varied …

Out-Of-Plane Flexural Behavior Of Insulatedwall Panels Constructed With Large Insulation Thicknesses, Jacob Luebke, Fray F. Pozo-Lora, Salam Al-Rubaye, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Insulated concrete sandwich wall panels (ICSWPs) are gaining popularity as energy regulations become stricter worldwide. ICSWPs are now being constructed with thinner wythes and thicker insulation to keep up with the changing market, which is reducing material costs and increasing thermal and structural efficiency. However, there is a need for adequate experimental testing to validate the current design methods for these new panels. This research aims to provide that validation by comparing the predictions of four different methods with experimental data obtained from six large-scale panels. The study found that while current design methods adequately predict the behavior of thin …

Optimization Of Plastic Waste Integration In Cement Bricks, Yara Salah El-Din El-Metwally

Architectural Engineering

Implementing plastic waste in construction materials is a sustainable disposal method to overcome plastic pollution. The current study aims to optimize the integration of plastic waste in cement bricks regarding their thermomechanical properties in order to develop an eco‑friendly building material. Polyethylene terephthalate (PET) and high‑density polyethylene (HDPE) partially substituted cement with different ratios (0, 2.5, 5, 7.5, 10, 20%). The type that achieved better thermomechanical performance further replaced the other brick components; sand and coarse aggregates to determine the optimum replacement scenario and best design mix. Laboratory experiments have been carried out to measure the compressive strength, indirect tensile …

A Knowledge Management Based Framework For Enhancing The Learning Culture In Architectural Design Firms In Developing Countries, Ayman Ahmed Ezzat Othman, Mirna Mohamed Elkady

Architectural Engineering

Purpose – In spite of the active role of continuous learning on improving organisational performance, the construction industry generally and architectural design firms (ADFs) in particular are criticised for their inability to use organisational knowledge to foster learning culture towards enhancing their performance. This paper aims to develop a framework based on knowledge management (KM) to enhance the learning culture in ADFs in developing countries.

Design/methodology/approach – To achieve the abovementioned aim, a research methodology consisted of data collection, data analysis and action required is designed to achieve four objectives. First, to examine the nature of the construction industry in …