Mechanical Engineering Commons^™

A Virtual-Reality-Based Dental Simulator For Endodontics With Automated Formative Feedback, Yousef Salah Abo El Ela

Theses and Dissertations

Advancements in virtual reality (VR) and haptic technology are transforming the landscape of medical and dental education, offering new avenues for safe, immersive, and repeatable training experiences. Within dentistry, endodontics presents unique challenges for preclinical education due to anatomical complexity, limited access to extracted teeth, ethical concerns, and the shortcomings of conventional plastic models. Despite endodontics specific plastic teeth being available, they fall short of replicating the hardness of real extracted teeth, are relatively costly compared to generic plastic teeth, and are ultimately a disposable item which makes them inadequate as a sustainable long-term solution. Extracted teeth do a much …

Harnessing Ml And Iiot For Traceability In Continuous Production Systems: A Conceptual Framework, Kholoud M. Abdelaal

Theses and Dissertations

In the era of rapid technological advancement, the manufacturing sector faces increasing pressure to leverage emerging technologies to enhance operational efficiency and minimize waste. In this context, traceability plays a pivotal role, as it provides complete visibility of processes and products throughout manufacturing systems, enabling them to identify areas for improvement and take corrective actions accordingly. Additionally, traceability ensures compliance, supports product recalls, provides a clear understanding of the system’s performance, and enables fact-driven decision-making in multiple aspects of the manufacturing system. Although the broad spectrum of traceability applications in batch production-based plants, traceability remains challenging to achieve in continuous …

Mechanical Characterization And Modeling Of Rat Myocardia Under The Influence Of Epirubicin, Abdallah Mahmoud Alkhaiyat

Theses and Dissertations

Cancer remains a predominant health challenge that is responsible for a significant portion of global morbidity and mortality. Epirubicin (EPI), a chemotherapeutic anti-cancer drug, has shown remarkable efficacy in combating various malignancies. However, it is known to have undesirable side effects on the heart, collectively referred to as cardiotoxicity. This research investigates the adverse effects of chemotherapy on cardiac contractility through an in vitro examination of the mechanics of healthy and infarcted animal heart tissues. Electrically stimulated slices of rat ventricular tissue were tested using an isometric force measurement tissue bath. The tissue slices were subjected to uniaxial stretching, allowing …

An Improved United-Atom Potential For Molecular Dynamics Simulation Of Saturated Properties Of N-Alkanes, Wazih Tausif, Jordan Hartfield, Alex George, Zhi Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multiple united-atom (UA) potential models have been developed in the literature to reproduce experimental saturated properties of n-alkanes using Monte Carlo simulations. When these UA potentials are employed in molecular dynamics (MD) simulations, MD simulations often give relatively poor predictions of saturated properties of n-alkanes, particularly the saturated vapor densities, due to the challenges in accurate calculation of long-range intermolecular forces beyond the cutoff distance in an inhomogeneous system. In this work, a new set of UA Lennard-Jones (LJ) interaction parameters for n-alkanes is proposed to reproduce the saturated properties, including saturated liquid and vapor densities (ρ_f and ρ …

Performance, Economic And Environmental Evaluation Of A Solar-Assisted Vacuum Deaeration Heating System., Liew Shan Kun

Student Works (2020-2029)

This research evaluates the performance of a solar-assisted heating (SAH) system for makeup water in a vacuum deaeration process. The system integrates solar energy into the heating process, with parametric analysis conducted across varying configuration of total solar radiation and water flow rates. The total solar radiation at the experimental site in Kuala Kangsar, Perak, Malaysia, characterized by tropical weather, fell within the range between 414W/m2 to 568W/m2. Performance analysis showed that a flow rate of 0.4 LPM achieved the target temperature of 61°C required for the deaeration process. Thermal efficiency peaked at 62.60% under a solar radiation of 900 …

Aerodynamic Forces In Water And Air With Changing Wing Geometry, Michael Anthony, Carson Running

Mechanical Engineering Student Publications

This paper is an exploration of how the effects of wing geometry on the lift and drag in both air and water. The purpose of these findings is to understand if there exists a foil geometry that would offer the best lift-drag ratio in both fluids. To find the answer, chamber, chord, span, and aspect ratio were adjusted in an attempt to maximize lift and drag. The calculations were done through Matlab and the results are shown through Matlab figures. The Matlab code created shows that symmetric airfoils have the greatest lift to drag ratios due to their lower drag …

V-22 Osprey Proprotor, Derek Krieger, Carson Running

Mechanical Engineering Student Publications

This paper covers an aerodynamic analysis of the Boeing Bell V-22 Osprey proprotor blade by utilizing thin-airfoil theory (TAT) and lifting-line theory (LLT). The primary focus is how the coefficient of lift and induced drag respond to changes in the angle of attack of the proprotor blades. The proprotor blade is modeled as a finite wing based on the NACA 63-212 airfoil. The wing has a geometric twist of -35 degrees from root to tip. The theories used to evaluate the blade design are limited by the assumption of incompressible, inviscid flow. The results of the analysis indicate that lift …

Aerodynamic Analysis Of The Constrained Naca 8412 Airfoil For Formula Sae Application Using Thin-Airfoil And Lifting-Line Theories, Trevor Fried, Carson Running

Mechanical Engineering Student Publications

This project applies Thin-Airfoil Theory (TAT) and Lifting-Line Theory (LLT) to evaluate the aerodynamic characteristics of the inverted NACA 8412 airfoil as a single-element rear wing for Formula SAE. The 2D analysis was validated against XFOIL (Re = 480,000), confirming a zero- lift angle of αL=0 = -8.326° and establishing a viscous limit of cl,max ≈ 1.90 at αstall ≈ 13.0°. The 3D LLT model quantified the induced drag (CD,i), demonstrating that the wing's low aspect ratio and rectangular planform reduce efficiency compared to elliptic loading, with the induced drag being the dominant total drag component at high angles of …

Reinforced Scan: A Reinforcement Learning Enabled Optimal Laser Scan Path Planning In Laser Powder Bed Fusion Additive Manufacturing, Chaoran Dou, Jihoon Chung, Raghav Gnanasambandam, Yuhao Wu, Jianzhi Li, Zhenyu James Kong

Manufacturing & Industrial Engineering Faculty Publications

Additive Manufacturing is an innovative technology that fabricates parts layer by layer. However, in Laser Powder Bed Fusion (LPBF), printed metal parts often exhibit residual stresses, deformations, and other defects due to non-uniform temperature distribution during the printing process. To mitigate these issues, an optimized scan sequence within each layer can improve thermal uniformity. Traditional optimization methods, which rely on domain knowledge and employ trial-and-error or heuristic approaches, often fail to achieve optimal solutions due to the complex nature of the problem. One major challenge in improving scan strategies lies in the vast search space required to optimize the scan …

In Situ And Operando Microscopy Studies On Lithium Metal Anodes: A Review, Ian Lindsey, Cameron Mondl, Xiangbo Meng

Mechanical Engineering Faculty Publications and Presentations

Lithium metal is regarded as an ultimate anode for rechargeable batteries, ascribed to its extremely high capacity. Its implementation can remarkably boost the energy density of the resultant lithium metal batteries. However, it is very challenging to commercialize lithium metal anodes, primarily due to the intertwined nature of the formation of a solid electrolyte interphase (SEI) and the growth of lithium dendrites. To understand these issues and therefore develop technical solutions, various instrumental techniques have been employed. This review highlights the most recent advancements of in situ and operando microscopy studies that are critical for investigating and addressing the issues …

Crystal Structures, Optical Behavior, And Magnetic Properties In Hydrated Lanthanide Iron Sulfates, Chole Jones, Silu Huang, Tyler L. Spano, Eric A. Gabilondo, Mohammed Al-Fahdi, Kara Trim, Mary Douglas, Rongying Jin, Andrew Miskowiec, P. Shiv Halasyamani, Ming Hu, Jie Ling

Faculty Publications

Single crystals of LnFe(SO₄)₃(H₂O)₂ (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm; compounds 1–11) and LnFe(SO₄)₃(H₂O) (Ln = Tm, Yb, Lu; compounds 12–14) were synthesized under hydrothermal conditions. Single-crystal X-ray diffraction (SCXRD) analysis revealed that the dihydrated compounds (1–11) crystallize in centrosymmetric (CS) structures, with the lanthanide ions adopting eight-coordinate geometries. In contrast, the monohydrated compounds (12–14) exhibit noncentrosymmetric (NCS) structures, where the lanthanide ions are seven-coordinated. Vibrating sample magnetometry (VSM) confirmed that compounds 2, …

Fatigue Crack Length Estimation Using Acoustic Emissions Technique-Based Convolutional Neural Networks, Asaad Migot, Ahmed Saaudi, Roshan Joseph, Victor Giurgiutiu

Faculty Publications

Fatigue crack propagation is a critical failure mechanism in engineering structures, requiring meticulous monitoring for timely maintenance. This research introduces a deep learning framework for estimating fatigue fracture length in metallic plates through acoustic emission (AE) signals. AE waveforms recorded during crack growth are transformed into time-frequency images using the Choi–Williams distribution. First, a clustering system is developed to analyze the distribution of the AE image-based dataset. This system employs a CNN-based model to extract features from the input images. The AE dataset is then divided into three categories according to fatigue lengths using the K-means algorithm. Principal Component Analysis …

Improved Performance Of Wave Energy Converters And Arrays For Wave-To-Onshore Power Grid Integration, Madelyn Veurink, David Wilson, Rush Robinett, Wayne Weaver

Michigan Tech Publications

This paper focuses on power grid integration of wave energy converter (WEC) arrays that minimize added energy storage for maximizing power capture as well as smoothing the oscillatory power inputs into the grid. In particular, a linear right circular cylinder WEC array that implements complex conjugate control is compared and contrasted to a nonlinear WEC array that implements an hourglass buoy shape while both are integrated into the grid utilizing phase control (i.e., relative spacing of the WEC array) on the input powers to the grid. The Hamiltonians of the two WEC systems are derived, enabling a direct comparison of …

Spectroscopic Investigations On Polyvinylidene Fluoride Nanofibers, Parinaz Amaniabdolmalaki, Jui Vitthal Kharade, Alexandro Trevino, Lydia Morales, Karen Lozano, Victoria Padilla, Karen S. Martirosyan, Horacio Vasquez, Mircea Chipara

Physics & Astronomy Faculty Publications

The production of polyvinylidene fluoride nanofibers by force-spinning from polymer solutions was confirmed by electron microscopy. The structural and phase characteristics of the resulting nanofiber mats were examined using Fourier Transform Infrared Spectroscopy in Attenuated Total Reflectance mode, Raman spectroscopy, and X-ray Diffraction. Results from all these techniques consistently indicated that both the powder and the mats of polyvinylidene fluoride predominantly contain the α phase, with a small admixture of the β phase. Within experimental errors, no other phases were noticed both in the powder and in the as-obtained mats. The ratios of the areas of the Raman lines at …

Simulation Study On Nh3 Combustion And NoX Emissions Under Gas Turbine-Relevant Conditions, Kumeesha Arumawadu, Braxton Wiggins, Ziyu Wang

Mechanical and Aerospace Engineering Student Publications and Presentations

Ammonia (NH₃) is a zero-carbon fuel and an attractive hydrogen (H₂) carrier for gas turbine power generation due to its high energy density, ease of storage, and transportation. This study numerically investigates NH₃/air combustion using a hybrid Well-Stirred Reactor (WSR) and Plug Flow Reactor (PFR) model in Cantera at pressures of 1–20 atm, temperatures of 1850–2150 K, and equivalence ratios (ϕ) of 0.7–1.2. The effects of pressure, equivalence ratio, and temperature on NH₃ conversion and NO formation are examined. Results show that NH₃ exhibits a non-monotonic conversion curve with pressure after the …

Tuning Oxygen Reduction Kinetics In Lasrcoo4 With Strained Epitaxial Thin Films And Wrinkled Freestanding Membranes, Habib Rostaghi Chalaki, Ebenezer Sessi, Mohammad El Loubani, Dongkyu Lee

Faculty Publications

Sluggish oxygen reduction reaction (ORR) remains a critical barrier to advancing intermediate-temperature electrochemical energy devices. Here, we demonstrate that strain engineering in two platforms, epitaxial thin films and freestanding membranes, systematically tunes ORR kinetics in Ruddlesden-Popper LaSrCoO4. In epitaxial films, film thickness is varied to control in-plane tensile strain, whereas in freestanding membranes strain relaxation during the release step using water-soluble sacrificial layers produces flat or wrinkled architectures. Electrochemical impedance spectroscopy analysis reveals more than an order of magnitude increase in the oxygen surface exchange coefficient for tensile-strained films relative to relaxed films, together with a larger oxygen vacancy concentration. …

Reformulation Of The Protein Databank For Real-Time Search Of Geometrical Attributes Of Protein Structures, Musa Azeem, Christopher Lee, Aaron Hein, Christopher Ott, Homayoun Valafar

Faculty Publications

Introduction:

In this study, we introduce the design and implementation of PDBMine, a large-scale, queryable platform for mining sequence-structure statistics from the Protein Data Bank (PDB). PDBMine enables rapid analysis of local conformational trends across proteins by extracting dihedral angles and sequence patterns at scale. In addition to the design and implementation of PDBMine, we also present results validating its ability to return structurally meaningful information.

Methods:

We first assess the accuracy of its dihedral angle distributions by comparing them to established Ramachandran space and verifying expected behaviors of residues such as glycine and proline. We then use PDBMine to …

Capturing Sclera Anisotropy Using Direct Collagen Fiber Models: Linking Microstructure To Macroscopic Mechanical Properties, Fengting Ji, Xuehuan He, Frederick Sebastian, Mohammad R. Islam, Hannah Schilpp, Bingrui Wang, Yi Hua, Rouzbeh Amini, Ian A. Sigal

Mechanical Engineering Faculty Publications

Collagen fibers are essential to the mechanical behavior of soft tissues, including sclera. Conventional models often represent these fibers statistically, potentially missing crucial aspects of their role in tissue behavior. In this study, we expand on a direct fiber modeling approach that we recently presented based on explicitly representing the sclera long, interwoven fiber bundles. Specifically, our goal was to capture specimen-specific 3D fiber architecture and anisotropic mechanics of four ovine sclera samples (superior from Eye-1, temporal and superior from Eye-2, and temporal from Eye-3), each tested under five conditions: equi-biaxial (1:1) and four non-equi-biaxial (1:0.75, 0.75:1, 1:0.5, and 0.5:1). …

Rheology-Guided Spinnability In Emulsion Forcespinning Of Water-In-Oil Nanofibers: Influence Of Surfactants And Internal Phase Concentration, Saptasree Bose, Alexandra Salinas, Evelyn Torres, Jose Ramirez, Elizabeth Gamez, Michelle A. Calabrese, Karen Lozano, Victoria Padilla

Mechanical Engineering Faculty Publications

This study explores the emulsion Forcespinning (FS) approach for fabricating nanofibers with a hydrophilic phase encapsulated within a hydrophobic polymer matrix. Key factors influencing fiber production and morphology, including the concentration of the internal water phase and the presence of ionic and nonionic surfactants, were systematically investigated. Additionally, the centrifugal spinnability of the emulsions was assessed using environmentally controlled dripping-onto-substrate (DoS) rheometry, correlating the observed extensional flow behavior and emulsion extensibility with fiber spinnability. The nanofibers were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) spectroscopy. These findings offer critical …

Model-Based Investigation Of The Influence Of Environmental Conditions On The Energy Supply Of Multirotor Uavs, Morten Roßberg, Hanna Dibbern, Claudia Werner

Journal of Aviation Technology and Engineering

Flight time of unmanned aerial vehicles (UAVs) is limited by available energy, which is affected by the mission profile and external factors, such as environmental conditions. Two main environmental conditions that need to be considered are the impact of wind and ambient temperature on the UAV and its energy supply. The purpose of this study is to examine the effects of wind and ambient temperature to conduct a preliminary evaluation of flight performance and flight limitations. For this reason, three locations in the United States—New York City, Miami, and Fairbanks—are selected and the impact of the considered environmental conditions of …