Valve Efficiency Testing Device,
2023
California Polytechnic State University, San Luis Obispo
Valve Efficiency Testing Device, Jake Robert Rydberg, Andrew Keith Willardson, Jake Ben Jezier, Emily Marie Wannenmacher
Mechanical Engineering
This document serves as the official Final Design Review (FDR) for the mechanical engineering team on the Valve Efficiency Testing Device project for the Phillips 66 Rodeo Refinery. The team attends California Polytechnic State University, San Luis Obispo. The project involved designing and building a valve efficiency testing device. The goal was to create a finished test device that can be used in the Phillips 66 Rodeo Refinery machine shop to test reciprocating compressor valves before they are installed. The purpose of this document is to describe the manufacturing and design verification activities that have been completed since Critical Design …
Exploring The Intersection Of Biology And Design For Product Innovations,
2023
Purdue University
Exploring The Intersection Of Biology And Design For Product Innovations, Ajay P. Malshe, Salil Bapat, Kamlakar Rajurkar, Ang Ang, Jean-Marc Linares
Department of Mechanical and Materials Engineering: Faculty Publications
Design, development, productization, and applications of advanced product concepts are pressing for higher multifunctionality, resilience, and maximization of available resources equitably to meet the growing and continuing demands of global customers. These demands have further accelerated during the recent COVID- 19 pandemic and are continuing to be a challenge. Engineering designs are one of the most effective ways to endow products with functions, resilience, and sustainability. Biology, through millions of years of evolution, has met these acute requirements under severe resource and environmental constraints. As the manufacturing of products is reaching the fundamental limits of raw materials, labor, and resource …
Analysis Of Ternary Chloride Salt Corrosion In High Nickel Alloys,
2023
University of New Mexico
Analysis Of Ternary Chloride Salt Corrosion In High Nickel Alloys, Dimitri Madden, Gowtham Mohan
Mechanical Engineering ETDs
The United States Department of Energy seeks to improve the efficiency of concentrating solar power technologies by employing thermal energy storage with operating temperatures above 700°C. To meet these goals, the National Solar Thermal Test Facility at Sandia National Laboratories has considered the use of a ternary molten chloride salt for sensible heat storage systems. While favored for low cost, good heat transfer properties, and stability at high temperature, ternary chloride salt also exhibits high corrosive attack. Components of a chloride salt storage system would include piping, valves, tanks, pumps, receivers, and heat exchangers, which would be exposed to high …
Leadership And Project Management In Engineering: Baja Tube Bender,
2023
University of Nebraska - Lincoln
Leadership And Project Management In Engineering: Baja Tube Bender, Maysyn Tm Sorensen
Honors Program: Senior Projects (Public)
Typical coursework for Undergraduate Mechanical Engineering students does not deeply focus on project management and leadership. Detailed in the following documentation is review of my Mechanical Engineering Senior Design capstone project as well as analysis of final presentations of other capstone projects. The Senior Design capstone projects spanned both semesters of the ‘22-’23 academic school year. After the first semester of my project I produced a post-mortem report to analyze the project’s progress and suggest improvements for the project, design, and team interaction. These improvements were compiled into an action plan and implemented in the spring semester. When the project …
Effects Of Alternative Jet Fuels On Aerospace-Grade Composites: Experimental And Modeling Studies,
2023
Mississippi State University
Effects Of Alternative Jet Fuels On Aerospace-Grade Composites: Experimental And Modeling Studies, Naoufal Harich
Theses and Dissertations
The aviation industry aims to reduce its environmental impact through innovation and research. The usage of composite materials for multiple primary structures represents one such measure. Several alternative fuels were approved and used along with the Federal Aviation Administration (FAA). These alternative fuels are produced from wastes and biomasses. Some alternative fuels were initially only approved as drop-in fuels, meaning they must be blended with conventional fuels to operate. Fuel tanks are usually embedded into the wing structure, which is mainly made of composite materials. These composites tend to absorb fluids it encounters through their matrix phase. The absorption behavior …
An Electric Commerce Platform For Material Testing Laboratories,
2023
Mississippi State University
An Electric Commerce Platform For Material Testing Laboratories, John Ferris Mitchener
Theses and Dissertations
The emergence of the Internet has allowed businesses to create new sales and marketing channels to provide value for their customers in the marketplace. Engineering manufacturers and suppliers have taken advantage of the internet to automate the customer service aspects of their businesses as well as to market their services in a cost-effective but widespread manner. This work aims to apply the practices and benefits of electronic commerce (e-commerce) to a material testing laboratory through the creation of a functioning website with e-commerce features. The effects of Search Engine Optimization, website accessibility issues, marketing considerations, security concerns, and common business …
Deep Learning Of Semantic Image Labels On Hdr Imagery In A Maritime Environment,
2023
Embry-Riddle Aeronautical University
Deep Learning Of Semantic Image Labels On Hdr Imagery In A Maritime Environment, Charles Montagnoli
Doctoral Dissertations and Master's Theses
Situational awareness in the maritime environment can be extremely challenging. The maritime environment is highly dynamic and largely undefined, requiring the perception of many potential hazards in the shared maritime environment. One particular challenge is the effect of direct-sunlight exposure and specular reflection causing degradation of camera reliability. It is for this reason then, in this work, the use of High-Dynamic Range imagery for deep learning of semantic image labels is studied in a littoral environment. This study theorizes that the use HDR imagery may be extremely beneficial for the purpose of situational awareness in maritime environments due to the …
Self-Assembly Of Exfoliated Graphene Flakes As Anticorrosive Coatings For
Additive Manufactured Steels,
2023
Portland State University
Self-Assembly Of Exfoliated Graphene Flakes As Anticorrosive Coatings For Additive Manufactured Steels, Kaleb Hood, Wen Qian, Yi Xia, Savannah Krupa, Annie Dao, Sarah Ahmed, Samuel Olson, Nam Nguyen, Joseph A. Turner, Jun Jiao
Department of Mechanical and Materials Engineering: Faculty Publications
This study demonstrates the feasibility of using liquid exfoliation of expandable graphite into multilayer exfoliated graphene flakes (EGFs) to form a self-assembled thin film on an air–water interface. The film can coat the surface of additive manufactured (AM) steel substrates to enhance surface properties, specifically AM 316 stainless-steel (AM316), AM 8620 steel (AM8620), and samples of the same alloys made by conventional manufacturing (CM) processes. Liquid exfoliation offers a high yield route for an EGF coating that can cover up to 95% of the sample surface with a single application. The thin, flexible EGFs can coat a rough AM metal …
Estimating Remaining Life And Fitness-For-Services Evaluation Of Fuel Piping Systems,
2023
Universitas Indonesia
Estimating Remaining Life And Fitness-For-Services Evaluation Of Fuel Piping Systems, Sekar Putri Purwidyasari, Ahmad Isni Kurniawan, Deni Ferdian
Journal of Materials Exploration and Findings
Assets life extension are required to predict the design life expiry based on condition and effects of deterioration. The remaining life assessment will answer the questions about timing of the component or equipment will lead to failure and shall be evaluated by inspection and maintenance monitoring. This study elaborates process calculation and analysis by using remaining life assessment and fitness for services method according to API 579-1/ASME FFS-1 for process piping area. The result of remaining useful life estimation and estimated life has been proposed. There are 11 piping systems based on the condition monitoring with thickness measurements. The result …
Comparative Design Space For Bistable Composites: An Integrated Framework Of Optimization, Finite Element Analysis, And Experimental Testing,
2023
Clemson University
Comparative Design Space For Bistable Composites: An Integrated Framework Of Optimization, Finite Element Analysis, And Experimental Testing, Jonathan Bolanos
All Theses
Bistable composites are a class of advanced materials that can actuate between two stable shapes, making them attractive for a wide range of engineering applications. However, designing these composites to achieve optimal performance remains a challenging task. To address the challenge, this research develops an integrated framework that combines a genetic algorithm optimization technique, finite element analysis in Abaqus, and experimental testing to explore the design comparative space for square bistable composites composed of DA 409 carbon fibers. This leads to the study of generating an optimization algorithm to account for the relationship between the chances of a successful maximum …
Reynolds-Averaged Navier-Stokes Cfd Simulation Of High-Speed Boundary Layers,
2023
University of Arkansas, Fayetteville
Reynolds-Averaged Navier-Stokes Cfd Simulation Of High-Speed Boundary Layers, Michael Tullis
Mechanical Engineering Undergraduate Honors Theses
This paper presents an investigation of Reynolds-averaged Navier-Stokes (RANS) turbulence models used in computational fluid dynamics (CFD) simulations of boundary layer flow and heat transfer in high Mach number flows. This study evaluates an industry standard RANS turbulence model (k-omega SST) and a recently proposed modification to that model (Danis and Durbin [1]), and quantifies the accuracy for predicting high Mach number boundary layer flow. The test cases were previously documented by Duan et al. (2018), who used direct numerical simulation (DNS) to calculate boundary layer flow of an ideal gas over a flat plate at freestream Mach numbers ranging …
The Characterization Of Atmospheric Turbulence And Its Effect On Laser Beam Propagation,
2023
Clemson University
The Characterization Of Atmospheric Turbulence And Its Effect On Laser Beam Propagation, Michael Cox
All Theses
Having a controlled environment to measure atmospheric turbulence is essential to understanding its effects on different laser beam characteristics. The Clemson Variable Turbulence Generator (VTG) has the capability to propagate a laser beam up to 100 m and be able to dial many turbulence settings up to a heat flux of 357 W/m2. A high-speed camera, power detector, and high-resolution temperature probes characterize the VTG with theoretical turbulence spectrums. The exponent associated with the Rayleigh-Bénard (RB) temperature structure constant equation is studied. Two different laser beam profiles are used throughout this work: Gaussian and Asymmetric Perfect Vortex (APV). …
Cycle Time Reduction In Additive Manufacturing Using Peltier Thermoelectric Cooling Devices,
2023
Georgia Southern University
Cycle Time Reduction In Additive Manufacturing Using Peltier Thermoelectric Cooling Devices, Trevor Carlton
Honors College Theses
Thermoelectric cooling and the Peltier effect were discovered in 1834, over 188 years ago. Additionally, the first iterations of additive manufacturing (i.e., 3D printing) began in the early 1980s, more than 40 years ago. Despite these technologies’ age and years of advancements, the application of Peltier cooling-based devices in additive manufacturing has not yet been realized. These devices can be used for the active thermal management of print beds in 3D printers. Developing a mechanism to heat and cool a print bed can reduce the cycle time to manufacture a part. In 3D printing, waiting for the heated bed to …
Structural Design And Fabrication Of A Test Chamber To Test Ppes For Effective Particle Filtration,
2023
Georgia Southern University
Structural Design And Fabrication Of A Test Chamber To Test Ppes For Effective Particle Filtration, Matthew G. Adharsingh
Honors College Theses
This research project aims to design and fabricate a test chamber for testing Personal Protective Equipment (PPE) to ensure effective particle filtration. The chamber has a special purpose, which is to measure ultrafine and submicron particles concentration in the air and test the ergonomic design of PPE based on its effective filtration. The project also considers the environmental aspects of the chamber such as the level of noise and vibration. The chamber will be designed to measure upstream and downstream particle count. Initially, the chamber was going to be made from wood, but the research team encountered difficulties in the …
The Aerocap Aerodynamic Attachment For Pickup Trucks,
2023
Arkansas Tech University
The Aerocap Aerodynamic Attachment For Pickup Trucks, Andrew J. Tucker, David Silk
ATU Scholars Symposium
As the pickup truck continuously becomes more popular in both commercial and family applications, the fuel efficiency of modern pickup design should be brought into question. According to CBS News, pickup trucks accounted for around 20% of all new vehicles sold in America in 2022, with the three most popular vehicles sold during the year all being pickups. However, these vehicles consistently have higher drag coefficients than other types of vehicles, namely sedans or crossovers. This leads to decreased fuel economy and more overall greenhouse gas emissions. Even in the case of an electric pickup truck, the high drag coefficient …
Editorial: Disease Biomarker
Analysis Based On Optical
Biosensing,
2023
Tongji University, Shanghai Jiao Tong University
Editorial: Disease Biomarker Analysis Based On Optical Biosensing, Tianshu Chen, Fanben Meng, Binwu Ying, Xiaoli Zhu
Department of Mechanical and Materials Engineering: Faculty Publications
Disease biomarker analysis has become a crucial tool for diagnosing and evaluating disease prognosis, especially with the increasing understanding of diseases at the molecular level. Abnormalities in various biomarkers can indicate diseased states, and can be used to rapidly and specifically detect and quantify diseases using optical biosensing techniques (Gao et al., 2023). Optical biosensing techniques have several advantages over traditional methods including higher sensitivity, specificity, and faster analysis times (Plikusiene and Ramanaviciene, 2023). It also allows for non-invasive sample collection. With advancements in optical biosensing technology, many medical conditions including cancers, infectious diseases, and autoimmune disorders can be accurately …
Editorial: Disease Biomarker
Analysis Based On Optical
Biosensing,
2023
Tongji University, Shanghai Jiao Tong University
Editorial: Disease Biomarker Analysis Based On Optical Biosensing, Tianshu Chen, Fanben Meng, Binwu Ying, Xiaoli Zhu
Department of Mechanical and Materials Engineering: Faculty Publications
Disease biomarker analysis has become a crucial tool for diagnosing and evaluating disease prognosis, especially with the increasing understanding of diseases at the molecular level. Abnormalities in various biomarkers can indicate diseased states, and can be used to rapidly and specifically detect and quantify diseases using optical biosensing techniques (Gao et al., 2023). Optical biosensing techniques have several advantages over traditional methods including higher sensitivity, specificity, and faster analysis times (Plikusiene and Ramanaviciene, 2023). It also allows for non-invasive sample collection. With advancements in optical biosensing technology, many medical conditions including cancers, infectious diseases, and autoimmune disorders can be accurately …
Considering The Influence Of Coronary Motion On Artery‑Specific
Biomechanics Using Fluid–Structure Interaction Simulation,
2023
Imperial College London
Considering The Influence Of Coronary Motion On Artery‑Specific Biomechanics Using Fluid–Structure Interaction Simulation, Nicholas A. T. Fogell, Miten Patel, Pan Yang, Roosje M. Ruis, David B. Garcia, Jarka Naser, Fotios Savvopoulos, Clint Davies Taylor, Anouk L. Post, Ryan M. Pedrigi, Ranil De Silva, Rob Krams
Department of Mechanical and Materials Engineering: Faculty Publications
The endothelium in the coronary arteries is subject to wall shear stress and vessel wall strain, which influences the biology of the arterial wall. This study presents vessel-specific fluid–structure interaction (FSI) models of three coronary arteries, using directly measured experimental geometries and boundary conditions. FSI models are used to provide a more physiologically complete representation of vessel biomechanics, and have been extended to include coronary bending to investigate its effect on shear and strain. FSI both without- and with-bending resulted in significant changes in all computed shear stress metrics compared to CFD (p = 0.0001). Inclusion of bending within …
A Threshold Helium Leakage Detection Switch With Ultra Low
Power Operation,
2023
University of Nebraska-Lincoln
A Threshold Helium Leakage Detection Switch With Ultra Low Power Operation, Sulaiman Mohaidat, Fadi M. Alsaleem
Department of Mechanical and Materials Engineering: Faculty Publications
Detecting helium leakage is important in many applications, such as in dry cask nuclear waste storage systems. This work develops a helium detection system based on the relative permittivity (dielectric constant) difference between air and helium. This difference changes the status of an electrostatic microelectromechanical system (MEMS) switch. The switch is a capacitive-based device and requires a very negligible amount of power. Exciting the switch’s electrical resonance enhances the MEMS switch sensitivity to detect low helium concentration. This work simulates two different MEMS switch configurations: a cantilever-based MEMS modeled as a single-degreefreedom model and a clamped-clamped beam MEMS molded using …
Crystalline–Amorphous Nanostructures: Microstructure,
Property And Modelling,
2023
University of Nebraska-Lincoln
Crystalline–Amorphous Nanostructures: Microstructure, Property And Modelling, Binqiang Wei, Lin Li, Lin Shao, Jian Wang
Department of Mechanical and Materials Engineering: Faculty Publications
Crystalline metals generally exhibit good deformability but low strength and poor irradiation tolerance. Amorphous materials in general display poor deformability but high strength and good irradiation tolerance. Interestingly, refining characteristic size can enhance the flow strength of crystalline metals and the deformability of amorphous materials. Thus, crystalline–amorphous nanostructures can exhibit an enhanced strength and an improved plastic flow stability. In addition, high-density interfaces can trap radiation-induced defects and accommodate free volume fluctuation. In this article, we review crystalline–amorphous nanocomposites with characteristic microstructures including nanolaminates, core–shell microstructures, and crystalline/amorphous-based dual-phase nanocomposites. The focus is put on synthesis of characteristic microstructures, deformation …
