Ocean Engineering Commons^™

Wave Goodbye To Salt, Andy Wu, Amanda Olla, Solie Grantham, Charlie Sinclair

Mechanical Engineering

Our team of Cal Poly Mechanical Engineers ideated, designed, built, and tested a system to help combat the growing problem of widespread drought in coastal and island communities. We developed a proof-of-concept model of a wave powered, mechanical system to desalinate ocean water using a reverse osmosis process. From topical research, it was found that there are many ways to harness a portion of the huge amount of energy that the ocean provides. While large scale ocean water desalination plants are already in operation, smaller scale desalination units powered by ocean waves are largely underdeveloped. Our relatively small and inexpensive …

Shallow-Water Wind Turbine Foundation, Andrew Walker, Nico Nani, James Cusanelli, Zachary Dunkelberger

Mechanical Engineering

Over the 2021-2022 academic year, we, the Shallow Water Wind Turbine Foundation senior project team, designed, manufactured, and tested a fixed bottom, sand mounted turbine foundation for the Cal Poly Wind Power Club’s Collegiate Wind Competition turbine. The foundation was restricted to certain material, installation, and geometric constraints outlined in this report, and needed to support the turbine under operating conditions including 22 m/s wind speeds. The design was analyzed using primarily a bearing capacity geotechnical analysis to determine final geometry and weight. The foundation was then manufactured using welded, custom carbon steel parts.

The foundation was inspected for geometric …

In Situ Observations Of Fish Attraction To Light-Emitting Diodes On An Undersea Observation Deck, Makoto Tomiyasu, Yoko Tanouchi, Yasuzumi Fujimori, Minato Kaji, Takuma Hayashi, Naoto Matsubara, Hiroki Yasuma, Susumu Shimizu, Seiji Katakura

Journal of Marine Science and Technology–Taiwan

Many fisheries employ fishing lights to manipulate the behaviors of target fish and to attract them toward the light; however, relatively few long-time observations of fish attraction have been performed in the field. Here, an underwater observation deck was used to examine the differences in the fish-attracting effect of light-emitting diode (LED) lights on the number of attracted fish and on their behavior in the field, using white-edged rockfish as the target species. A total of 604 ± 324, 307 ± 203 and 171 ± 106 white-edged rockfish individuals were attracted to the observation window when it was illuminated with …

Inter-Annual Variability In Growth And Maturation Of The Swordtip Squid Uroteuthis Edulis In Yilan Bay Off Northeastern Taiwan, Jing-Yu Chen, Tzu-Yun Ching, Chih-Shin Chen

Journal of Marine Science and Technology–Taiwan

The swordtip squid Uroteuthis edulis, distributed in the temperate and tropical neritic waters in the Indo-Pacific region, is a crucial component of marine ecosystems and is a target species of fisheries in the Northwest Pacific. Although studies have elucidated the growth and maturation of the squid in the southern East China Sea (ECS) shelf, few have assessed the population biology of the squid in waters in the vicinity of the southern ECS. We collected samples of swordtip squid from a trawler in Yilan Bay (YLB) between January 2011 and December 2012 to examine the growth and maturation of the squid …

Study On The Improved Radiation Boundary Conditions Based On The Quadratic B-Spline Rankine Panel Method, Ming-Chung Fang, Chun-Hsien Wu

Journal of Marine Science and Technology–Taiwan

This study presents a higher-order Rankine source method that is based on a biquadratic B-spline scheme with an improved radiation boundary condition. This method solves flow problems under all conditions, where , including the undercritical condition ( < 0.25); this condition is present when a ship undergoes slow translational motion. The proposed method is thus more flexible than the many Rankine-source models in the literature that are applicable only to the overcritical condition ( > 0.25). Specifically, the improved radiation boundary condition is derived from upstream Seto radiation boundary conditions and by incorporating the Rayleigh damping distribution over a free surface; the improved condition is explicit and efficient for solving flow problems. In evaluations, the proposed method yields accurate solutions for unsteady flows, which are produced by an oscillating, translationally moving submerged singularity. The method is also compared …

Sensitive Analysis Of The Static Response Of Compliant Vertical Access Risers, Fuheng Li, Haiyan Guo, Xiaomin Li, Honglu Gu

Journal of Marine Science and Technology–Taiwan

Compliant vertical access risers (CVARs) are considered as efficient and robust alternative options to achieve cost efficiency and safety. Design uncertainties emerge owing to the limited understanding of the effects of various parameters related to the structural properties and marine loads. In this paper, a reasonable three-dimensional (3D) numerical model of CVAR with internal flow is presented based on the slender rod theory. Accordingly, the finite element method combined with a Newton-Raphson scheme is employed to discretize and solve the equations. A sensitivity analysis is performed to investigate the influence of the structural and external load parameters on the static …

Influence Of Boundary Conditions And Internal Fluid Types On Dynamic Characteristics Of A Deepwater Riser, Lei Guo, Zong-Ming Zhu, Zhong-Jian Pan, Zhi-Ming Guo

Journal of Marine Science and Technology–Taiwan

Deepwater Steel Catenary Riser (DSCR) is the key structure of oil and gas production system in the ocean. To design an optimized DSCR system, the dynamic characteristics of the DSCR are analyzed by setting some different boundary condi-tions and internal fluid types. The main vibration mode of the DSCR is found orthogonal to both mass and stiffness according to the normalization condition of the main mode, and then the regular mode function and the jth order principal stiffness Kpj are obtained. Under different initial conditions, the transverse responses of DSCR represented by regular coordinates under arbitrary excitation are obtained. Then, …

Variance Of Td-Mosaic Dual-Vortex Interactions Between In-Fa And Cempaka (2021) In The North Pacific, Tsorng-Lin Chia, Guang-Yang Pan, Ji-Chyun Liu

Journal of Marine Science and Technology–Taiwan

A study of the different types of dual-vortex interactions or “Fujiwara effects” between two storms is crucial for considerably improving weather forecasts. This study combined remote sensing images, empirical formulas based on the possibility of storm interaction (Liou–Liu formula), and vector addition techniques to accurately analyze In-Fa and Cempaka typhoons and the surrounding weather patterns during the 2021 typhoon season in the North Pacific. Although the distance separating the typhoons In-Fa and Cempaka was 1,800–2,040 km, the influence of middle air flow and a tropical depression (TD) caused a "vector superposition TD-mosaic double-vortex" interaction between the two typhoons. Therefore, this …

Optimal Deployment Of Flood Emergency Response Materials Under Stochastic Demands, Shangyao Yan, Jenn-Rong Lin, Chia-Fu Ku

Journal of Marine Science and Technology–Taiwan

This study aims to develop a planning model for the deployment of flood emergency response materials under stochastic demands. For ease of modeling, a deterministic demand model is first proposed, from which the stochastic model is further extended. These models are used to determine the allocation of materials the transport truck routes and distribution of the stockpiled materials to emergency sites. The models are formulated as multiple integer network flow problems with special side constraints which are characterized as NP-hard in terms of optimization. To solve the complicated stochastic model efficiently, we also develop a solution algorithm based on a …

Ballasting System For An Autonomous Underwater Vehicle, Noura Rayes, Bahram Nassersharif, Zach Champney, Kyle Alessandro, Jason Mirandou

Senior Honors Projects

NOURA RAYES (Mechanical Engineering); Ballasting System for an Autonomous Underwater Vehicle Sponsor: Bahram Nassersharif (Mechanical Engineering)

Over the last year, our Mechanical Engineering Capstone team, Nautilus, has been working to design a ballasting system for various Autonomous Underwater Vehicles (AUVs) sponsored by Raytheon Technologies. Common AUV systems are used for a wide range of applications from environmental monitoring, oceanic exploration, to data collection. AUVs also have many technical advantages that make underwater tasks more efficient, cost-effective, and generally safer. Raytheon Technology, specifically, is looking to improve their existing ballasting mechanism for their AUVs to use for military defense. For this …

Investigating The Application Of Flettner Rotors On The Great Lakes, Garrett C. Bond

Senior Honors Theses

Climate change is quickly becoming one of the leading problems of the twenty-first century, and the maritime transportation sector is beginning to react. Wind propulsion technologies have been making a comeback led by the Flettner rotor. The deck-mounted, vertical, spinning cylinder generates a lift (or thrust) force perpendicular to the wind by utilizing the Magnus effect. Rotor performance has been studied extensively on many ocean shipping routes, but has not been on the Great Lakes, a region with a large maritime industry. This study aims to assess whether or not Flettner rotors are practical in the region by calculating propulsive …

Enhancement Of Biogas Production Through Solid-State Anaerobic Co-Digestion Of Food Waste And Corn Cobs, Lukhi Mulia Shitophyta, Anisa Salsabila, Firanita Angraini Putri, Siti Jamilatun

Makara Journal of Technology

Although biogas has been primarily produced through liquid anaerobic digestion, this method leads to the floating and stratification of fibers and non-homogeneous mixing, which can reduce the biogas yield. Alternatively, biogas can be produced by the solid-state anaerobic digestion (SS-AD) of organic material with a high solid content, such as corn cobs. We investigated the co-digestion of food waste and corn cobs as a biomass feedstock for SS-AD in biogas production. We measured the effects of the total solid (TS) content, percentage of food waste, and reduction in volatile solids (VS), from which we determined its appropriate kinetic model. We …

Control Strategy For Solar Energy-Saving Lamps For Optimized Energy Utilization And Sustainability Of Operation Durability: Indonesia Case, Burhanuddin Halimi, Agus Purwadi, Nana Heryana

Makara Journal of Technology

To solve the electrification ratio issue, the Indonesian government has promoted the use of solar energy-saving lamps. This study proposes a control strategy that adopts current reference time-based profiling for solar energy-saving lamps. For optimal energy consumption, the current reference profile is determined according to users’ daily energy requirements. From the aspect of user comfort, a gradual step reference profile is also introduced to provide a subtle change in lighting intensity level. The proposed control strategy can minimize energy consumption and optimize the operation durability of the system. The concept is verified by simulating four scenarios, the results of which …

A Non-Iteration Solution For Solving The Backward-In-Time Two-Dimensional Burgers’ Equation With A Large Reynolds Number, Yen-Shen Chang, Yung-Wei Chen, Chein-Shan Liu, Jiang-Ren Chang

Journal of Marine Science and Technology–Taiwan

This article proposes a noniteration solution based on the Lie-group shooting method (LGSM) to solve the backward-in-time two-dimensional Burgers’ equation with a large Reynolds number. The backward problem is famous for seriously ill-posed cases because the solution is generally unstable and highly dependent on the input data. Small perturbations in the input data, such as random errors inherent to the measurements in the analysis, can cause large oscillations in the solution. To handle a large Reynolds number under long time spans, it is very difficult to integrate towards the time direction. To avoid time integration and numerical iteration, the noniteration …

Polyketides And Terpenes In Marine Microalgae: Ecological Roles And Mechanisms Of Biosynthesis, Yunxuan Xie, Mohammad Elsheikh

Journal of Marine Science and Technology–Taiwan

Marine microalgae comprise a large number of polyketides and terpenes identified to date with highly diverse molecular scaffolds and the biological activities (Kalaitzis et al., 2010). These compounds play significant roles in marine food web and nutraceutical supplementation in marine animals. Compounds of this class are often synthesized by gene clusters with dedicated domains responsible for carbon chain extension and modification. The unique molecular structure of these compounds encourages people to investigate their biosynthetic mechanisms in-depth. In this review, we summarize relevant articles to unravel the shared mechanisms of these compounds to further understand the variety of domain organizations and …

Unbaited Light-Emitting Diode Traps Performance For Catching Orange Mud Crabs, Muhamad Naimullah, Kuo-Wei Lan, Mhd Ikhwanuddin, Adnan Amin-Safwan, Wei-Yu Lee

Journal of Marine Science and Technology–Taiwan

Mud crabs (Scylla spp.) are a vital fishery resource and targeted for a valuable source of income for coastal communities throughout the Indo-Pacific region. Baited traps are a considerable expense in crustacean fishing. Hence, the present study was performed to investigate the catchability of Scylla olivacea in response to light-emitting diodes (LEDs) in captivity and field conditions. We used a new experimental setup in the captivity condition that revealed most S. olivacea were attracted to green, blue, and white LED lights and no attractive effect by red LED lights similar to the controls. Field studies have shown that the catch …

Catch And Effort Standardization For Taiwanese Swordtip Squid Uroteuthis Edulis Fisheries In The Southern East China Sea, Ke-Yang Chang, Yu-Jie Hsu, Tzu-Yun Ching, Cheng-Hsin Liao, Chih-Shin Chen

Journal of Marine Science and Technology–Taiwan

The swordtip squid Uroteuthis edulis is a neritic squid species that is widely distributed within the coastal waters of subtropical and tropical Indo-western Pacific regions. This squid is a commercially important species throughout its distribution range and plays a critical role in marine ecosystems. Stock assessments of the squid in the East China Sea (ECS) are scarce, although it is crucial information for the sustainability of the squid and relevant fisheries. The squid was harvested by various fisheries in the southern ECS, which could restrict methods for catch-effort standardization. In this study, catch-effort data of Taiwanese swordtip squid fisheries in …

Uniform Torsion Analysis Of Composite Shafts Using Point Collocation Method Based On Pascal Polynomials, Chih-Wen Chang, Jyh-Hong Wu, Ying-Ru Lin, Yu-Feng Lin, Nan-Nong Huang

Journal of Marine Science and Technology–Taiwan

Torsion bars are important elements in the marine structure applications. The usage of the composite torsion bars has increased recently because it takes advantage of the different material property of each constituent. The current research focuses mainly on the uniform warping analysis of composite torsion shafts by using the point collocation method (PCM). The PCM is based on Pascal's triangle polynomial expansion and coupled with subdomain technique that is indispensable for the analysis of composite bars. In addition to satisfying the field equation (Laplace equation for warping function) and traction-free boundary condition for each component, the continuity conditions in both …

Local Reinforcement Design And Safety Factor Evaluation Of Elliptical Hatch Of Pressure Hull, Guang-Min Luo, Jun-Wei Chen

Journal of Marine Science and Technology–Taiwan

A pressure hull is the primary pressure-resistant structure of a submarine. To safeguard the compressive strength of such a hull, local structural reinforcement is required for various hatches on the hull. Hatches are commonly reinforced through increasing the thickness of the hull regions around them; alternatively, hatch nozzle walls are connected with stiffened frames to maintain the continuity of reinforced structures. This study focused on a pressure hull with an elliptical hatch. A PD-5500 cylindrical pressure hull was used to design a cylindrical pressure hull structure, and a model of hatch nozzle reinforcement was designed using the Boiler and Pressure …

Effects Of Dietary Lipid, L-Carnitine And L-Lysine Supplementation On The Growth Performance And Body Composition Of Epinephelus Lanceolatus Larvae, Jen-Hong Chu, Yu-Cong Hong, Angela Chien, Shyn-Shin Sheen

Journal of Marine Science and Technology–Taiwan

The effects of different combinations of dietary lipid, L-carnitine and L-lysine on the growth performance and fatty acid profiles of larval grouper Epinephalus lanceolatus were evaluated. Eight treatment diets were formulated based on a 2x2x2 factorial design, namely 5 and 14% dietary oil mixture (3:1 fish oil/soybean oil), 0 and 0.5% L-carnitine and 0 and 2.83% L-lysine. Each diet was randomly assigned to triplicate groups of ten 0.08g E. lanceolatus larvae for 42 days. The grouper larvae fed with diets containing 14% lipid had significantly higher weight gain percentages than those fed with diets containing 5% lipid. The weight gain …