Energy Systems Commons^™

Cooling And Heating Season Impacts Of Right-Sizing Of Fixed- And Variable-Capacity Heat Pumps With Attic And Indoor Ductwork, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

The U.S. Department of Energy's research team Building America Partnership for Advanced Residential Construction implemented two phases of experiments to examine the cooling and heating seasonal and peak demand performance of a variable-capacity 2-ton SEER 22 heat pump versus a 3-ton variable-capacity SEER 21 heat pump with attic ducts and indoor ducts. The experiments also compared the cooling and heating seasonal and peak demand performance of 2-ton versus 3-ton fixed-capacity SEER 13 heat pumps with attic ducts and indoor ducts.

Solar Decathlon 2015, Solar Cal Poly; Solar Cal Poly Project Engineers, Cristina Paquin, Julien Blarel, Sanchit Joshi

Mechanical Engineering

No abstract provided.

Solar Cal Poly Active Hvac Project, James Cornish, Jake Cosmo, Patrick Weston

Mechanical Engineering

For this project, the goal was to conceptualize, design, test, and implement an active HVAC system to be used in the Solar Cal Poly house competing in the Department of Energy’s 2015 Solar Decathlon. With many house iterations, it was decided to use a split system with an outdoor heat pump and indoor air handler, paired with a HRV for ventilation. Through system modeling using Design Builder and Energy Pro 6.5, the cooling load of the house was determined along with the cooling schedule. The foreseen safety precautions and limited construction time guided the entire project, along with the active …

Increasing Isentropic Efficiency With Hydrostatic Head And Venturi Ejection In A Rankine Power Cycle, Nathan Daniel Ruiz

Master's Theses

This thesis describes the modifications made to the Cal Poly Thermal Science Laboratory’s steam turbine experiment. While the use of superheating or reheating is commonly used to increase efficiency in a Rankine cycle the methods prove unfeasible in a small scale project. For this reason, a mathematical model and proof of concept design using hydrostatic head generated by elevation and venturi ejection for use by the condenser is developed along with the equations needed to predict the changes to the system. These equations were used to create software to predict efficiency as well as lay down the foundation for future …

Conversion Of A Gas Combustion Engine To An Electric Motor In A Porsche 924, Ashley Weed

BioResource and Agricultural Engineering

This paper is a walk-through of converting a gasoline Porsche 924 to and electric engine. The paper begins with steps on how to remove the gasoline engine. It then goes into setting up the electrical system for the new electric vehicle and then follows up with the motor installation. The end of the report discusses the testing and results of the electric vehicle and finishes up with recommendations to anyone who attempts a similar project.

Shark Alert: Early Warning System, Cory Peterson, Marc Rauschnot, Taylor Mcclain

Electrical Engineering

The Shark Alert Early Warning System is a device geared toward avid beach goers such as surfers, divers, and swimmers. The system is composed of an ultrasonic transmitter mounted on a shark’s dorsal fin and a receiver worn by the user around the ankle. The receiver alerts the user to the presence of a shark upon ultrasonic signal detection.

The receiver warns the user through both visual and tactile (vibration) alerts to ensure user notification. This circuit was built and tested in the EE labs and Recreation Center pools to determine transmission range. The receiver detects the transmitted signal up …

Power Maximization Of A Three-Phase Hydrokinetic Turbine, Matthew Carleson

Senior Theses

As Earth`s expendable resources dwindle, the need for alternative, renewable energy sources grows. Out of this need, an old favorite source is rising in popularity: small water turbines. Water-driven turbines first began as a means for turning mills and eventually evolved into massive dams that can power whole regions. This project focused on the construction of, and testing the properties of, a small pico-hydro power turbine. By using compressed air to drive the turbine, a representation of the peak power output was measured, serving as a basis for determining the value of pico-power systems in regards to the world`s current …

Developing Exhaust Air Energy Recovery Credits For The Florida Energy Code, Florida Solar Energy Center, Bereket Nigusse

FSEC Energy Research Center®

Energy Recovery Ventilator (ERV) or Heat Recovery Ventilator (HRV) devices recover energy from building's exhaust air to precondition outdoor air. Energy savings of ERV/HRV devices were determined for various commercial buildings in Florida climate using whole building energy simulation tool. The annual HVAC energy percent savings due to ERV/HRV device were calculated from HVAC energy use of a standard reference building without and with ERV/HRV device using EnergyPlus. The annual HVAC energy savings potential (ERV Credits) will be used for code compliance calculation when a compliance software does not have ERV modeling capability. The ERV/HRV credits were reported by building …

Maximum Energy Efficiency Cost Effectiveness In New Home Construction, Florida Solar Energy Center, Philip W. Fairey

FSEC Energy Research Center®

EnergyGauge® USA (v.4.0.00) is used to examine the cost effectiveness of high performance homes that are improved to significantly exceed the minimum requirements of the 2015 IECC. The objective of the study is to determine the maximum level of energy efficiency that can be considered cost effective to the consumer. For these purposes, it is the cost effectiveness of the entire package of measures that is considered by the analysis rather than the cost effectiveness of individual measures. Optimization and rank ordering of the individual improvement measures in the package is not considered by the analysis.

One-story 2,000 ft^{2 …}

Maximum Power Point Tracking And Solar Power For Developing Countries Around The World, Christopher M. Plate

Electrical Engineering Undergraduate Honors Theses

Renewable energy is becoming increasingly important as more and more countries become industrialized. Using solar power as opposed to fossil fuels and coal is becoming cheaper and easier to access throughout the world, yet there are still efficiency hurdles to be overcome. Designing a cheap, easily modifiable and reparable Maximum Power Point Tracker would be a stepping stone to bringing solar power to remote parts of the globe. Once designed and made portable, these devices could be distributed throughout developing countries to enhance renewable energy output. An Arduino-based tracker was chosen for ease of use and access. This base also …

Improved Methods For Identifying, Applying, And Verifying Industrial Energy Efficiency Measures, Andrew Chase Harding

Graduate Theses and Dissertations

Energy efficiency is the least expensive source of additional energy capacity for today's global energy expansion. Energy efficiency offers additional benefits of cost savings for consumers, reduced environmental impacts, and enhanced energy security. The challenges of energy efficiency include identifying potential efficiency measures, quantifying savings, determining cost effectiveness, and verifying savings of installed measures. This thesis presents three separate chapters which address these challenges. The first is a paper presented at the 2014 industrial energy technology conference (IETC) that details a compressed air system project using the systems approach to identify cost effective measures, energy intensity to project savings, and …

Available Work Rate Of A Reversible System Bounded By Constant Thermal Resistances Linked To Isothermal Reservoirs, Jim Mcgovern

Conference Papers

Exergy analysis is based on the concept of an idealized, all-enclosing reference environment that has infinite heat capacity and thermal conductivity, and is in equilibrium. The actual surroundings of a real plant such as a heat engine, a heat pump or a refrigerator may differ significantly from the ideal. First law performance parameters and second law rational efficiency are examined. The concepts of finite time thermodynamics are applied in an attempt to refine the concept of T0, the environmental reference temperature, thereby making exergy analysis more reflective of reality.

The Integration Of Heat Resources In A Solar Thermal-Heat Pump Hydronic System, John Degrove

Purdue Polytechnic Masters Theses

According to the U.S. Department of Energy, roughly 41% of the energy consumed in the U.S. is used the power buildings. Within that number, almost half is used to heat or cool the building. Current technologies allow for consistent thermal management, but most utilize energy harvested from fossil fuels or convert electricity back into thermal energy. Background literature shows that the utilization of alternative heat resources such as heat pumps and solar thermal collectors can greatly reduce the energy used for heat delivery while producing adequate heating performance. A combined hydronic system using a bank of solar thermal collectors in …

Experimental Verification And Integration Of A Next Generation Smart Power Management System, Tavis Clemmer

Graduate Theses and Dissertations

With the increase in energy demand by the residential community in this country and the diminishing fossil fuel resources being used for electric energy production there is a need for a system to efficiently manage power within a residence. The Smart Green Power Node (SGPN) is a next generation energy management system that automates on-site energy production, storage, consumption, and grid usage to yield the most savings for both the utility and the consumer. Such a system automatically manages on-site distributed generation sources such as a PhotoVoltaic (PV) input and battery storage to curtail grid energy usage when the price …

Semi-Annual Program Progress Performance Report For The Electric Vehicle Transportation Center Pppr#3, Florida Solar Energy Center, David L. Block

FSEC Energy Research Center®

This document covers the program activities of the University of Central Florida's Electric Vehicle Transportation Center (EVTC) for the 6 month period of October 1, 2014 to March 31, 2015. The Electric Vehicle Transportation Center supports the U.S. Department of Transportation's strategic goal of planning for near-term integration of alternative fuel vehicles as a means to build a sustainable transportation system. The project objectives are to evaluate technologies, standards and policies to ensure seamless integration of electric vehicles (EVs) into a complex transportation network and electricity grid. The EVTC will bridge the gap between deployment of electric vehicles and the …

Electric Vehicle Sales For 2014 And Future Projections, Florida Solar Energy Center, David L. Block

FSEC Energy Research Center®

The object of this research is to assess the current status and to predict the future penetration of electric vehicles (EVs) within the U.S. market. The prediction method is based on EV yearly sales giving the cumulative vehicles on the road for 2010 through 2014 and the growth rates for these five years. Using these growth values, the future ten year values are calculated. The EV sales results for 2014 in the U.S. show that 118,773 vehicles were sold as compared to 96,700 vehicles in 2013. This gives a one year sales growth rate of 23%. The total cumulative number …

Investigating Solutions To Wind Washing Issues In Two-Story Florida Homes, Phase 2, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

With U.S. Department of Energy goals of reducing existing home energy use by 30% and new home energy use by 50%, it is imperative to focus on several energy efficiency measures, including the quality of air and thermal barriers. This report provides results from a second-phase research study of a phenomenon generally referred to as wind washing. Wind washing is the movement of unconditioned air around or through building thermal barriers in such a way as to diminish or nullify the intended thermal performance. This study focused on the impact of poorly sealed and insulated floor cavities adjacent to attic …

Characterization Of Wake Effects And Loading Status Of Wind Turbine Arrays Under Different Inflow Conditions, Xiangyu Gao

Open Access Theses

The objective of the present work is to improve the accuracy of Actuator Line Modeling (ALM) in predicting the unsteady aerodynamic loadings on turbine blades and turbine wake by assessing different methods used to determine the relative velocity between the rotating blades and wind. ALM is incorporated into a Large Eddy Simulation (LES) solver in OpenFOAM (Open Field Operations and Manipulations). The aerodynamic loadings are validated by experiment results from National Renewable Energy Laboratory (NREL). Turbine wakes are validated by predictions of large eddy simulation using exact 3D blade geometries from a two-blade NREL Phase VI turbine. Three different relative …

A Mechanical Regenerative Brake And Launch Assist Using An Open Differential And Elastic Energy Storage, David H. Myszka, Andrew P. Murray, Kevin Giaier, Vijay Krishna Jayaprakash, Christoph Gillum

Mechanical and Aerospace Engineering Faculty Publications

Regenerative brake and launch assist (RBLA) systems are used to capture kinetic energy while a vehicle decelerates and subsequently use that stored energy to assist propulsion. Commercially available hybrid vehicles use generators, batteries and motors to electrically implement RBLA systems. Substantial increases in vehicle efficiency have been widely cited.

This paper presents the development of a mechanical RBLA that stores energy in an elastic medium. An open differential is coupled with a variable transmission to store and release energy to an axle that principally rotates in a single direction. The concept applies regenerative braking technology to conventional automobiles equipped with …

Vortex Identification In The Wake Of A Wind Turbine Array, Aleksandr Sergeyevich Aseyev

Dissertations and Theses

Vortex identification techniques are used to analyze the flow structure in a 4 x 3 array of scale model wind turbines. Q-criterion, Δ-criterion, and λ₂-criterion are applied to Particle Image Velocimetry data gathered fore and aft of the last row centerline turbine. Q-criterion and λ₂-criterion provide a clear indication of regions where vortical activity exists while the Δ-criterion does not. Galilean decomposition, Reynolds decomposition, vorticity, and swirling strength are used to further understand the location and behavior of the vortices. The techniques identify and display the high magnitude vortices in high shear zones resulting from the …