Thermal Hydraulic Turbine Dynamometer,
2015
California Polytechnic State University - San Luis Obispo
Thermal Hydraulic Turbine Dynamometer, Ryan Baskett, Alexander Campbell, Andrew Puntorno-Carlberg
Mechanical Engineering
No abstract provided.
High Temperature Hepa Filter Test Unit Upgrades,
2015
California Polytechnic State University - San Luis Obispo
High Temperature Hepa Filter Test Unit Upgrades, Alexander Krippner, Ian Corcorran, Michael Burlando
Mechanical Engineering
No abstract provided.
Industrial Energy Consumption, Benchmarking, And Analysis In The United States,
2015
University of Arkansas, Fayetteville
Industrial Energy Consumption, Benchmarking, And Analysis In The United States, Daniel Maldonado
Mechanical Engineering Undergraduate Honors Theses
The purpose of this paper is to analyze the energy consumption of the industrial sector in the United States, and to identify the tools that can be used to minimize the consumption and improve the energy efficiency of all facilities in the country. The first part of the paper is a historical analysis of the industrial sector energy consumption, where the different energy sources are identified. The second part details different electronic tools that will provide facilities the ability of performing benchmarking, in order to understand their energy performance. Finally, the third part of this paper provides information about the …
A Look At Commercial Building Energy Use And Energy Efficiency Technologies From 1980 To Present,
2015
University of Arkansas, Fayetteville
A Look At Commercial Building Energy Use And Energy Efficiency Technologies From 1980 To Present, Marvin M. Arroyo
Mechanical Engineering Undergraduate Honors Theses
Energy consumption has increased considerably in the last fifty years as population rises. At the same time, design and efficiency of all equipment used in commercial buildings have changed as well. The purpose of this thesis is to explain how HVAC systems have changed and how they have affected energy consumption. Entities like the US Department of Energy (DOE) and the US Energy Information Administration (EIA) facilitate the data-gathering process by offering databases of energy information from actual monthly energy bills to promote public understanding of energy and its interaction with the economy and the environment. Moreover, in order to …
Evaluation Of Two-Phase Evaporation Pressure Drop Correlations For Low Refrigerant Mass Flux.,
2015
Univeristy of Louisville
Evaluation Of Two-Phase Evaporation Pressure Drop Correlations For Low Refrigerant Mass Flux., Anna Fenko
Electronic Theses and Dissertations
This study was conducted to evaluate three currently popular two-phase pressure drop models for extremely low velocity refrigerant flow through smooth circular evaporators in household refrigeration systems. Experimental data was taken at mass fluxes under 70 kg/m2s for two refrigerants, R134A and R600A, internal diameters of aluminum evaporators ranging from 0.186 to 0.317 inches, U-bend internal radii ranging from 0.342 to 0.750 inches in horizontal and vertical orientations of evaporators. The geometry of the samples closely resembled a commonly used serpentine shape with multiple U-bends experiencing both, up- and down-flow of the refrigerant. Two empirical models, Müller-Steinhagen & …
Simulation Of An Air Cooled Single-Effect Solar Absorption Cooling System With Evacuated Tube Collectors,
2015
University of Nevada, Las Vegas
Simulation Of An Air Cooled Single-Effect Solar Absorption Cooling System With Evacuated Tube Collectors, Mohsen Jahandardoost
UNLV Theses, Dissertations, Professional Papers, and Capstones
Consistently increasing CO2 emission and ozone depletion from synthetic refrigerants are serious environmental issues challenging the scientific community. Absorption cooling systems give scope of utilizing low grade energy source for generating cooling effect. Solar energy is one of these low grade energy sources and with considering the fact that cooling demand increases with the intensity of solar radiation, solar refrigeration has been considered as a logical solution.
This thesis consists of two different simulation stages, in the first stage, a single effect lithium bromide absorption cooling system with constant cooling capacity is modeled and the effect of ambient and generator …
Cultural Change Through Bim: Driving Lean Transformation In Education,
2015
Technological University Dublin
Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods
Conference papers
This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …
Semi-Annual Program Progress Performance Report For University Transportation Systems, Pppr#4, October 2015,
2015
Florida Solar Energy Center
Semi-Annual Program Progress Performance Report For University Transportation Systems, Pppr#4, October 2015, Florida Solar Energy Center, David L. Block
FSEC Energy Research Center®
A summary of the major activities reported in the following pages is as follows. In the research area, the collection and analysis of data from the Nissan funded DC fast charger at FSEC (Project #3), the development of a student and faculty battery laboratory at Tuskegee University (Project #8), the opening of a new University of Hawaii battery test lab (Project #9), a computer model to optimize electrical costs for Tallahassee StarMetro buses (Project #14), and the installation and beginning of data collection from the FSEC wireless charging laboratory (Project #15). Detailed industry interactions for the period included Nissan, NovaCharge, …
Why Doesn't 25 Years Of An Evolving Energy Code Make More Of A Difference?,
2015
Florida Solar Energy Center
Why Doesn't 25 Years Of An Evolving Energy Code Make More Of A Difference?, Florida Solar Energy Center, Charles Withers, Jr.
FSEC Energy Research Center®
This paper was presented at the 2015 Behavior, Energy and Climate Change Conference (BECC). New and more stringent building energy codes are implemented with the assumption and expectation that significant energy conservation will occur. While simulation and various analysis methodologies may be reasonably sound at estimating the energy impact, the actual impact is largely dependent upon new code enforcement and occupant behavior. This work is based upon the research question: Do homes built to a newer energy code deliver measurable energy savings compared to homes built to a much earlier energy code? This residential research study was focused on comparing …
Simulating The Energy Performance Of A Foam Roof System,
2015
Florida Solar Energy Center
Simulating The Energy Performance Of A Foam Roof System, Florida Solar Energy Center, Jeffrey Sonne
FSEC Energy Research Center®
Annual residential simulations were run in 13 US cities to determine the energy savings of using an insulated foam tile roof in retrofit applications where ceiling insulation was only R-11 or R-19. Variations included leaving the attic vented and sealing the attic space.
Thermodynamic Analysis Of Closed Steady Or Cyclic Systems,
2015
Technological University Dublin
Thermodynamic Analysis Of Closed Steady Or Cyclic Systems, Jim A. Mcgovern
Articles
Closed, steady or cyclic thermodynamic systems, which have temperature variations over their boundaries, can represent an extremely large range of plants, devices or natural objects, such as combined heating, cooling and power plants, computers and data centres, and planets. Energy transfer rates can occur across the boundary, which are characterized as heat or work. We focus on the finite time thermodynamics aspects, on energy-based performance parameters, on rational efficiency and on the environmental reference temperature. To do this, we examine the net work rate of a closed, steady or cyclic system bounded by thermal resistances linked to isothermal reservoirs in …
An Energy Cube Project For Teaching Engineering Design Process,
2015
Technological University Dublin
An Energy Cube Project For Teaching Engineering Design Process, Fionnuala Farrell, Shannon Chance, Micheal O'Flaherty
Conference papers
This year, the College of Engineering and the Built Environment at our institute inaugurated a new Common First Year design project module that helps inform students in the selection of a specific engineering discipline. Each student, prior to selecting their bachelor’s specialism, completes three group-based design projects: a bridge design project (to familiarise students with civil and structural engineering), a RoboSumo project (involving robotics, programming, electrical and electronics engineering), and an Energy Cube project (introducing fundamentals of mechanical, manufacturing and design, and building services engineering). This paper focuses on how the engineering design process was taught via the Energy Cube. …
Assessment Of Critical Technologies For Gas Turbine Engines Using Numerical Tools,
2015
Purdue University
Assessment Of Critical Technologies For Gas Turbine Engines Using Numerical Tools, Vinicius Pessoa Mapelli, Guillermo Paniagua, Jorge Sousa
The Summer Undergraduate Research Fellowship (SURF) Symposium
In 2014 gas turbine engine has reached a market value of 82.5 billion dollars, of which 59.5% are related to aircraft propulsion. The continuous market expansion attracts more and more the interest of researchers and industries towards the development of accurate numerical techniques to model thermodynamically the entire engine. This practice allows a performance and optimization analysis before the actual experimental testing, reducing the time and required investment in the design of a new engine. In this paper, a recently developed open source numerical tool named “Toolbox for the Modeling and Analysis of Thermodynamic Systems” (T-MATS) is used to assess …
Hot Surface Ignition,
2015
Purdue University
Hot Surface Ignition, Yerbatyr Tursyn, Vikrant Goyal, Alicia Benhidjeb-Carayon, Richard Simmons, Scott Meyer, Jay P. Gore
The Summer Undergraduate Research Fellowship (SURF) Symposium
Undesirable hot surface ignition of flammable liquids is one of the hazards in ground and air transportation vehicles, which primarily occurs in the engine compartment. In order to evaluate the safety and sustainability of candidate replacement fuels with respect to hot surface ignition, a baseline low lead fuel (Avgas 100 LL) and four experimental unleaded aviation fuels recommended for reciprocating aviation engines were considered. In addition, hot surface ignition properties of the gas turbine fuels Jet-A, JP-8, and JP-5 were measured. A test apparatus capable of providing reproducible data was designed and fabricated to experimentally investigate the hot surface ignition …
Fracture Mechanics-Based Simulation Of Pv Module Delamination,
2015
Texas A & M University - College Station
Fracture Mechanics-Based Simulation Of Pv Module Delamination, Dominic I. Jarecki, Johanna B. Palsdottir, Peter Bermel, Marisol Koslowski
The Summer Undergraduate Research Fellowship (SURF) Symposium
Photovoltaic (PV) cells are rapidly growing as a renewable alternative to fossil fuels like coal, oil, and natural gas. However, greater adoption has also reduced government subsidies, placing the onus of making solar panels economically competitive on innovative research. While multiple methods have been considered for reducing costs, with each reduction in cost comes the associated peril of reduction in quality and useful lifetime. Several problems considered solved have now resurfaced as potential failure mechanisms with the introduction of cheaper PV cell technologies. However, to remain economically viable, PV modules will not only have to become cheaper, they will have …
Three-Dimensional Scaffolds Of Graphene, Carbon Nanotubes And Transition-Metal Oxides For Applications In Electronics, Sensors And Energy Storage,
2015
University of Nebraska-Lincoln
Three-Dimensional Scaffolds Of Graphene, Carbon Nanotubes And Transition-Metal Oxides For Applications In Electronics, Sensors And Energy Storage, Gilbert N. Mbah
Department of Chemistry: Dissertations, Theses, and Student Research
Electronics, sensors and energy storage devices are the new waves behind economic development, security and communication1. Engineering small sizes of electronic, sensors and energy storage devices is the hurdle limiting efficient, portable and vast applications of Nano-devices for economic, security and communication advancement2. Silicon the major material used in transistors has approached its limit to fabricated Nano-devices3. The discovery of free standing, one atomic layer thick and two-dimensional graphene sheets with high conductivity, inert, high specific surface area, stable and high tensile strength material in 2004 has shown capabilities to replaced silicon in electronics, …
Triboelectric Solar Generator Concept And Experimental Research,
2015
Old Dominion University
Triboelectric Solar Generator Concept And Experimental Research, Elias Yazdanshenas
Mechanical & Aerospace Engineering Theses & Dissertations
In this thesis, a novel concept, a triboelectric solar generator (TSG ), is proposed for generation of high voltage direct current (HVDC) electricity from solar radiation. An experimental investigation was conducted to prove the concepts of charge generation through the triboelectric effect and charge transmission using semiconductors. The triboelectric effect, also known as the contact electrification, is a well-known physical phenomenon that electrostatic charges are generated by rubbing dissimilar materials. However, traditional triboelectric generators had never been commercialized due to their poor power output. Physically, it is due to the difficulty of charge transmission from insulators, which generate charges. The …
Sunsense/Sunsmart Plus-Up Schools Program Final Inspection Report,
2015
Florida Solar Energy Center
Sunsense/Sunsmart Plus-Up Schools Program Final Inspection Report, Florida Solar Energy Center, Susan Schleith
FSEC Energy Research Center®
This report provides information regarding the photovoltaic systems that are associated with the 2014 Sunsense/Sunsmart School Plus-UP program. Dave Click led the project as Principal Investigator and technical expert. Susan Schleith, participated as Co-Principal Investigator and education/school liaison. Four schools participated in the program. Each of the photovoltaic systems installed at the schools was inspected by the University of Central Florida's Florida Solar Energy Center (FSEC), as well as the local authority having jurisdiction (AHJ). This report details the results of the final inspections associated with National Electric Code (NEC) and performance testing as required by the Sunsense/Sunsmart Schools Plus-UP …
The Epa P3 Program: An Opportunity For Growing Student Entrepreneurs,
2015
Embry-Riddle Aeronautical University
The Epa P3 Program: An Opportunity For Growing Student Entrepreneurs, Marc Compere, Yan Tang, Yung Wong
Publications
In this paper we will share our experiences of fostering entrepreneurial spirit through projects funded by EPA (Environmental Protection Agency) P3 (People, Prosperity, and the Planet) Program which hosts the P3 collegiate competition for designing solutions for a sustainable future. Since 2012, we have integrated the P3 competition with the capstone design course of Clean Energy Systems track in mechanical engineering as an effective educational vehicle for introducing the concept of sustainable design. Since the competition focuses on designs which have values of real world application, it is also a great opportunity to create entrepreneurial spirit. We have successfully turned …
Investigation Of The Effectiveness And Failure Rates Of Whole-House Mechanical Ventilation Systems In Florida,
2015
Florida Solar Energy Center
Investigation Of The Effectiveness And Failure Rates Of Whole-House Mechanical Ventilation Systems In Florida, Florida Solar Energy Center, Jeffrey Sonne
FSEC Energy Research Center®
This report presents the results of a field investigation of the effectiveness and failure rates of whole-house mechanical ventilation systems installed in Florida homes over the last 15 years. The report includes homeowner survey and ventilation system testing results and code modification recommendations based on study findings.
