Energy Systems Commons^™

Slurry-Trench Cutoff Walls For The Containment Of The Coal Combustion Residuals (Ccr) Impacted Groundwater: Evaluation Of Hydraulic Conductivity And Consolidation Properties Of Soil-Bentonite Backfills, Y.L. Yang, Krishna Reddy, Y.J. Du, R.D. Fan

World of Coal Ash Proceedings

No abstract provided.

Ccp Beneficial Use Risk Assessment: Case Studies For Three Different Applications, Andrew Bittner, Ari Lewis

World of Coal Ash Proceedings

No abstract provided.

Corrective Measures/Corrective Action (Cm/Ca) Strategies That Effectively Integrate Engineered Pond Closures And Short/Long-Term Groundwater Management With Case Study Examples, Steve Putrich

World of Coal Ash Proceedings

No abstract provided.

Managing Landfill Leachate In A World Without Ash Basins: Lessons Learned And Practical Considerations, Evan Andrews, Michael Lazar

World of Coal Ash Proceedings

No abstract provided.

Developing Enhanced Monitored Natural Attenuation Strategies Using Reactive Transport Models, Pj Nolan, Hugh Davies, Greg Hebeler, Rens Verburg

World of Coal Ash Proceedings

No abstract provided.

Enhancing Coal Ash Impoundment Closure Using Value Engineering, Holt Wheeler, Trey Mangers, Paul Lear

World of Coal Ash Proceedings

No abstract provided.

Experimental Test Method To Determine The Reactivity Of Fly Ash For Use In Concrete Mixture Proportioning, Antara Choudry, Deborah Glosser, O. Burkan Isgor, W. Jason Weiss

World of Coal Ash Proceedings

No abstract provided.

Overview Of Epri Research On Environmental Issues And Beneficial Use Of Coal Combustion Products, Bruce Hensel, Ken Ladwig

World of Coal Ash Proceedings

No abstract provided.

Is My Site A Candidate For A Groundwater Natural Attenuation Remedy? A Geochemist’S Perspective, Bob Glazier

World of Coal Ash Proceedings

No abstract provided.

Impoundment Closure Enhancement Measures To Support Groundwater Compliance, John Hesemann, Wayne Weber, Eric Dulle

World of Coal Ash Proceedings

No abstract provided.

Panel On Liquefaction Of Ponded Fly Ash: From Laboratory To Practice, Tarunjit S. Butalia

World of Coal Ash Proceedings

No abstract provided.

Geospatial Energy Potential And Life Cycle Assessment Of Nearshore Oscillating Water Column Systems, Aleks Siemenn, Marie-Odile Fortier

CURCE Annual Undergraduate Conference

Oscillating Water Column (OWC) systems are an iteration of terminator ocean energy technology which generate electrical energy from turbine torque induced by the compression of air in a chamber from changing water level height. OWCs are a well-established technology, however, there have been no studies to date which quantify the life cycle environmental impacts of these systems in a geographic context. The goal of this study is to optimally size an OWC system for selected New England coastline sites and then assess the environmental impacts of the varying system sizes.

An OWC system is optimally sized when the volume of …

Exploring The Electrical Properties Of Twisted Bilayer Graphene, William Shannon

Senior Theses

Two-dimensional materials exhibit properties unlike anything else seen in conventional substances. Electrons in these materials are confined to move only in the plane. In order to explore the effects of these materials, we have built apparatus and refined procedures with which to create two-dimensional structures. Two-dimensional devices have been made using exfoliated graphene and placed on gold contacts. Their topography has been observed using Atomic Force Microscopy (AFM) confirming samples with monolayer, bilayer, and twisted bilayer structure. Relative work functions of each have been measured using Kelvin Probe Force Microscopy (KPFM) showing that twisted bilayer graphene has a surface potential …

Insulated Solar Electric Cooker With Phase Change Thermal Storage Medium, Justin Brett Unger, Nathan Robert Christler, Matthew Weeman, Marcus Edward Strutz

Mechanical Engineering

This final design review document outlines the senior design project carried out by a team of four mechanical engineering students at the California Polytechnic State University – San Luis Obispo under the sponsorship of Dr. Peter Schwartz of the Cal Poly Physics department. The aim of this project was to improve upon the design of previously developed Insulated Solar Electric Cookers (ISECs) by adding a thermal storage system to allow for quicker cook times and the ability to cook food at non-peak solar hours. The team’s goal was to develop a working prototype utilizing a phase change medium as the …

Dynamic Behavior And Performance Of Different Types Of Multi-Effect Desalination Plants, Mohamed Abdelkareem

Electronic Theses and Dissertations

Water and energy are two of the most vital resources for the socio-economic development and sustenance of humanity on earth. Desalination of seawater has been practiced for some decades and is a well-established means of water supply. However, this process consumes large amounts of energy and the global energy supply is also faced with some challenges. In this research, multi-effect desalination (MED) has been selected due to lower cost, lower operating temperature and efficient in terms of primary energy and electricity consumption compared to other thermal desalination systems. The motivation for this research is to address thermo-economics and dynamic behavior …

Bgaas Alloy Semiconductors For Lasers On Silicon, Joshua Mcarthur

Mechanical Engineering Undergraduate Honors Theses

In the world of semiconductors today, there is a large dissonance between optical devices and electrical application. Due to the limitations of electron transport, photonic integrated circuits are soon-to-be vital in fields like telecommunications and sensing. Right now, these PIC’s are mostly made from indium phosphide. Due to its ubiquitous nature, however, there is a huge push to integrate efficient optics with silicon. It’s cheap, abundant, dope-able, and our electronic infrastructure is based on it. The reason why silicon photonics aren’t already commercialized is because of silicon’s indirect bandgap—it is inefficient with optical applications. The problem with combining direct gap …

Challenges And Opportunities Of Layered Cathodes Of Linixmnyco(1-X-Y)O2 For High-Performance Lithium-Ion Batteries, Jason Frank

Mechanical Engineering Undergraduate Honors Theses

High energy density lithium-ion batteries (LIBs) are widely demanded for portable electronic devices and electrical vehicles. Layered-structure LiCoO₂ oxide (LCO) has been the most commonly used cathode material in commercial LIBs. Compared to LCO, LiNi_1-x-yMn_xCo_yO₂ (NMC) cathodes are particularly attractive due to their reduced cost and higher capacity. Among the NMC cathodes, nickel-containing LiNi_0.5Co_0.3Mn_0.2O₂ (NMC532) is one of the most promising cathode materials undergoing intensive investigation, but suffers from a series of technical issues, such as structural instability, performance fading, and safety issues. In this …

Lithium Molybdate-Sulfur Battery., Ruchira Ravinath Dharmasena

Electronic Theses and Dissertations

Rechargeable energy storage systems play a vital role in today’s automobile industry with the emergence of electric vehicles (EVs). In order to meet the targets set by the department of energy (DOE), there is an immediate need of new battery chemistries with higher energy density than the current Li- ion technology. Lithium–sulfur (Li–S) batteries have attracted enormous attention in the energy-storage, due to their high specific energy density of 2600 Wh kg^-1 and operational voltage of 2.0 V. Despite the promising electrochemical characteristics, Li-S batteries suffer from serious technical challenges such as dissolution of polysulfides Li₂S_{x …}

The Design Of An Innovative Automotive Suspension For Formula Sae Racing Applications, Jared Darius

Senior Honors Theses

This thesis details an analytical approach to an innovative suspension system design for implementation to the Formula SAE collegiate competition. It focuses specifically on design relating to geometry, mathematical modeling, energy element relationships, and computer analysis and simulation to visualize system behavior. The bond graph approach is utilized for a quarter car model to facilitate understanding of the analytical process, then applied to a comparative analysis between two transverse half car models. The second half car model contains an additional transverse linkage with a third damper, and is compared against the baseline of the first half car model without the …

Construction Of High-Performance 3d Nanostructured Flower-Like Iron-Nickel Sulfide For Supercapacitor, Chen Zhao, Sanket Bhoyate, Chunyang Zhang, Ram K. Gupta, Pawan K. Kahol

Posters

The global energy crisis and environmental pollution have stimulated increasing attention to developing clean and renewable alternative energy sources. One of the most efficient and greenest energy storage devices is supercapacitor which could store energy via electrical double layer and redox reactions. Supercapacitors are widely employed for many portable electronics and hybrid electric vehicles due to their high-power density, fast charge-discharge rate, and good cycle stability. In this work, 3D nanostructured flower-like iron-nickel sulfide was synthesized on the nickel foam using a facile hydrothermal method. The iron-nickel sulfide electrode showed out­standing performance for supercapacitor with a high areal capacitance of …