Biomechanical Engineering Commons^™

Predicting Articular Cartilage Constituent Material Properties Following In Vitro Growth Using A Proteoglycan-Collagen Mixture Model, Michael Stender

Master's Theses

      A polyconvex continuum-level  proteoglycan Cauchy stress function was developed based on the continuum electromechanical Poisson-Boltzmann unit cell model for proteoglycan interactions. The resulting proteoglycan model was combined with a novel collagen fibril model and a ground substance matrix material to create a polyconvex constitutive finite element model of articular cartilage. The true collagen fibril modulus , and the ground substance matrix shear modulus , were varied to obtain the best fit to experimental tension, confined compression, and unconfined compression data for native explants and explants cultured in insulin-like growth factor-1 (IGF-1) and transforming growth factor-β1 (TGF-β1).  Results indicate …

Crop Updates 2011 - Weeds, Grant Thompson, Abul Hashem, Catherine Borger, Peter Newman, Mike Ashworth, Glen Riethmuller, David Minkey, Harmohinder Dhammu, David Nicholson, Michael Walsh, Ray Harrington, Nicholas Woods

Crop Updates

This session covers twelve papers from different authors:

1. Herbicides for selective spot spraying application on winter weeds in chemical fallow, Grant Thompson, Landmark/Crop Circle Consulting, Geraldton

2. Management of emerging weeds within the Western Australian wheatbelt, Abul Hashem and Catherine Borger Department of Agriculture and Food

3. Integrated Weed Management (IWM) – it’s all about early sowing of a big crop, Peter Newman, Department of Agriculture and Food

4. Increased water rates improve the performance of trifluralin in minimum tillage systems, Catherine Borger1, Mike Ashworth2, Glen Riethmuller1, David Minkey2, Abul …

Characterising 3d Soft Tissue Features On Joint Surfaces, Colm O'Kane

Conference Papers

A crucial aspect of orthopaedic implant design is the prediction of surgical outcomes when the shape of a bone is necessarily altered by the addition of the implant. Matching native kinematics as closely as possible is generally considered a core aim of joint replacement surgery. The overall hypothesis behind this research is that soft tissue geometry, including cartilage thickness distribution and ligament attachment sites, influences kinematics in the knee joint. In order to enable investigation of possible links between geometry and kinematics, the ability to characterise the shape variation of the soft tissue relative to the underlying bony geometry must …

Label-Free Biochemical Recognition Using Mems Resonators For Microarray Technology, Babak Tousifar

Electronic Theses and Dissertations

Highly sensitive biosensors capable of detecting and characterizing smallest quantities of cellular and molecular targets are needed in pharmaceutical and medical diagnostics industries. In this work, the importance of biological target recognition specifically proteins through microarray technologies has been discussed and the most successful tools and techniques have been studied. Moreover, a thermally actuated Micro Electro-Mechanical Systems (MEMS) resonator has been demonstrated and fabricated in this work as an accurate, reliable and low cost biotechnology tool. As a proof of concept, amine to epoxide coupling of octadecylamine to functionalized silicon dioxide surface have been shown through resonator frequency monitoring. The …

Low-Cost Prosthetic Leg For The Vida Nueva Prosthesis Clinic, Sarah M. Baker, Justin G. Lekos, Jen Van Donk, Kevin Yamauchi

Mechanical Engineering

The Piernas de Vida team partnered with the Vida Nueva Clinic of Prostheses and Orthoses in Choluteca, Honduras to design, plan, and implement a prosthetic foot that could be manufactured entirely by the technicians at the clinic in order to reduce their costs and ultimately allow them to serve more patients each year. Currently, the clinic uses a prefabricated prosthetic lower limb provided by the International Committee of the Red Cross (ICRC) which can be adapted to both transDfemoral and transDtibial patients. The team has successfully developed a foot, currently called the Layer Foot, which can be used by the …

Implicit Methods For Efficient Musculoskeletal Simulation And Optimal Control, Antonie J. Van Den Bogert, Dimitra Blana, Dieter Heinrich

Mechanical Engineering Faculty Publications

The ordinary differential equations for musculoskeletal dynamics are often numerically stiff and highly nonlinear. Consequently, simulations require small time steps, and optimal control problems are slow to solve and have poor convergence. In this paper, we present an implicit formulation of musculoskeletal dynamics, which leads to new numerical methods for simulation and optimal control, with the expectation that we can mitigate some of these problems. A first order Rosenbrock method was developed for solving forward dynamic problems using the implicit formulation. It was used to perform real-time dynamic simulation of a complex shoulder arm system with extreme dynamic stiffness. Simulations …

Estimation Of The Centre Of Mass From Motion Capture And Force Plate Recordings: A Study On The Elderly, Sebastien Cotton, Michele Vanoncini, Philippe Fraisse, Nacim Ramdani, Emel Demircan, Andrew P. Murray, Thierry Keller

Mechanical and Aerospace Engineering Faculty Publications

The estimation of the centre of mass position in humans is usually based on biomechanical models developed from anthropometric tables. This method can potentially introduce errors in studies involving elderly people, since the ageing process is typically associated with a modification of the distribution of the body mass. In this paper, an alternative technique is proposed, and evaluated with an experimental study on 9 elderly volunteers. The technique is based on a virtual chain, identified from experimental data and locating the subject's centre of mass. Its configuration defines the location of the centre of mass, and is a function of …

Using Thermally Coupled Reactive Distillation Columns In Biodiesel Production, Nghi Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Production of ethyl dodecanoate (biodiesel) using lauric acid and methanol with a solid acid catalyst of sulfated zirconia is studied by using two distillation sequences. In the first sequence, the methanol recovery column follows the reactive distillation column. In the second sequence, the reactive distillation and methanol recovery columns are thermally coupled. Thermally coupled distillation sequences may consume less energy by allowing interconnecting vapor and liquid streams between the two columns to elminate reboiler or condenser or both. Here we study the thermally coupled side-stripper reactive distillation and eliminate the condenser of the reactive distillation column. Both the sequences are …

Personal Navigation Via High-Resolution Gait-Corrected Inertial Measurement Units, Özkan Bebek, Michael A. Suster, Srihari Rajgopal, Michael J. Fu, Xuemei Huang, M. Cenk Çavu¸So˘Glu,, Darrin J. Young, Mehran Mehregany, Antonie J. Van Den Bogert, Carlos H. Mastrangelo

Mechanical Engineering Faculty Publications

In this paper, a personal micronavigation system that uses high-resolution gait-corrected inertial measurement units is presented. The goal of this paper is to develop a navigation system that uses secondary inertial variables, such as velocity, to enable long-term precise navigation in the absence of Global Positioning System (GPS) and beacon signals. In this scheme, measured zerovelocity duration from the ground reaction sensors is used to reset the accumulated integration errors from accelerometers and gyroscopes in position calculation. With the described system, an average position error of 4 m is achieved at the end of half-hour walks.

Concurrent Muscoskeletal Dynamics And Finite Element Analysis Predicts Altered Gait Patterns To Reduce Foot Tissue Loading, Jason P. Halloran, Marko Ackermann, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Current computational methods for simulating locomotion have primarily used muscle-driven multibody dynamics, in which neuromuscular control is optimized. Such simulations generally represent joints and soft tissue as simple kinematic or elastic elements for computational efficiency. These assumptions limit application in studies such as ligament injury or osteoarthritis, where local tissue loading must be predicted. Conversely, tissue can be simulated using the finite element method with assumed or measured boundary conditions, but this does not represent the effects of whole body dynamics and neuromuscular control. Coupling the two domains would overcome these limitations and allow prediction of movement strategies guided by …

Longitudinal Sex Differences During Landing In Knee Abduction In Young Athletes, Kevin R. Ford, Robert Shapiro, Gregory D. Meyer, Antonie J. Van Den Bogert, Timothy E. Hewett

Mechanical Engineering Faculty Publications

Purpose—

The objective of this study was to determine if biomechanical and neuromuscular risk factors related to abnormal movement patterns increased in females, but not males, during the adolescent growth spurt.

Methods—

315 subjects participated in two testing sessions approximately one year apart. Male and female subjects were classified based on their maturation status as pubertal or post-pubertal.Three trials of a drop vertical jump (DVJ) were collected. Maximum knee abduction angle and external moments were calculated during the DVJ deceleration phase using a 3D motion analysis system. Changes in knee abduction from the first to second year were compared among …

A Novel Piezoelectric Device With Dual Functions Of Studying Biological Soft Tissues, Avin A. Jamadagni

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis presents the design of a novel piezoelectric device with dual functions of studying soft biological tissues. The device consists of a central circular plate and a set of flexural beams. The flexural beams are partially covered with piezoelectric film for integrated transduction. It can function as a force sensor for measuring the mechanical behavior of a tissue sample and a load applier for mimicking physiological loads experienced by the tissue sample in vivo, while the mechanical behavior can be visually observed under a microscope simultaneously. By combining the classic theories in solid mechanics and piezoelectricity, the performance of …

Material Modeling And Analysis For The Development Of A Realistic Blast Headform, S. G. M. Hossain

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Blast traumatic brain injury (BTBI) has become an important topic of study because of the increase of such incidents, especially due to the recent growth of improvised explosive devices (IEDs). This thesis discusses a project in which laboratory testing of BTBI was made possible by performing blast loading on experimental models simulating the human head. Three versions of experimental models were prepared – one having a simple geometry and the other two having geometry similar to a human head. For developing the head models, three important parts of the head were considered for material modeling and analysis – the skin, …

Mechanical Testing Device For Viscoelastic Biomaterials, Jeff D. Berg

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Nearly all biologic tissues exhibit viscoelastic behavior. This behavior is characterized by hysteresis in the response of the material to load or strain. This information can be utilized in extrapolation of life expectancy of vascular implant materials including native tissues and synthetic materials. This behavior is exhibited in many engineering materials as well such as the polymers PTFE, polyamide, polyethylene, etc. While procedures have been developed for evaluating the engineering polymers the techniques for biologic tissues are not as mature. There are multiple reasons for this. A major one is a cultural divide between the medical and engineering communities. Biomedical …

Intelligibility Of Electrolarynx Speech Using A Novel Actuator, Brian Madden, Mark Nolan, Ted Burke, James Condron, Eugene Coyle

Conference Papers

During voiced speech, the larynx provides quasi-periodic acoustic excitation of the vocal tract. Following a laryngectomy, some people speak using an electrolarynx which replaces the excitatory function of the absent larynx. Drawbacks of conventional electrolarynx designs include the buzzing monotonic sound emitted, the need for a free hand to operate the device, and difficulty experienced by many laryngectomees in adapting to its use. Despite these shortcomings, it remains the preferred method of speech rehabilitation for a substantial minority of laryngectomees. In most electrolarynxes, mechanical vibrations are produced by a linear electromechanical actuator, the armature of which percusses against a metal …

Strider, Eric Johnson, Alex Trask, Ricardo Garcia

Mechanical Engineering

No abstract provided.

Medtronic Universal Crimping Machine, Justin Ginochio, Andrew Hanson, Zachary (Zach) Dieterle

Mechanical Engineering

This project is geared towards the redesign and implementation of a crimping tool for use in the manufacturing of catheters produced by Medtronic Inc. Catheters require two steering cables to maneuver the end of the catheter through the body. The steering cables have a sleeve that is crimped onto their end in order to hold the cable in place inside the catheter steering handle. The current crimping tool, designed by Astro Tool Corp, has a few problems associated with its design. Additionally we are trying to get rid of a step in the manufacturing process that involves the adhesive, cyanoacrylate, …

Edwards Lifesciences: Heart Valve Tension Validation, Lucas Fochler, Alex Mark, Shilpan Shah

Mechanical Engineering

No abstract provided.

Optimization And Evaluation Of A Proportional Derivative Controller For Planar Arm Movement, Kathleen M. Jagodnik, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

In most clinical applications of functional electrical stimulation (FES), the timing and amplitude of electrical stimuli have been controlled by open-loop pattern generators. The control of upper extremity reaching movements, however, will require feedback control to achieve the required precision. Here we present three controllers using proportional derivative (PD) feedback to stimulate six arm muscles, using two joint angle sensors. Controllers were first optimized and then evaluated on a computational arm model that includes musculoskeletal dynamics. Feedback gains were optimized by minimizing a weighted sum of position errors and muscle forces. Generalizability of the controllers was evaluated by performing movements …

Optimality Principles For Model-Based Prediction Of Human Gait, Marko Ackermann, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Although humans have a large repertoire of potential movements, gait patterns tend to be stereotypical and appear to be selected according to optimality principles such as minimal energy. When applied to dynamic musculoskeletal models such optimality principles might be used to predict how a patient's gait adapts to mechanical interventions such as prosthetic devices or surgery. In this paper we study the effects of different performance criteria on predicted gait patterns using a 2D musculoskeletal model. The associated optimal control problem for a family of different cost functions was solved utilizing the direct collocation method. It was found that fatigue-like …