Acoustics, Dynamics, and Controls Commons^™

Design Of Versatile Feedback Control System Components For Selective Laser Sintering, Thomas Chessman

University Scholar Projects

Selective laser sintering (SLS) is an additive manufacturing technique that involves using a laser to fuse powdered material together, layer by layer, in order to create a 3-D product. Despite its numerous benefits over traditional methods of manufacturing, including higher efficiency, versatility, and the ability to process many materials, selective laser sintering suffers from its propensity to generate structural errors during operation.

Feedback control has been shown to improve fabrication quality in other laser-based additive manufacturing techniques when implemented properly. Widespread exploration of applying feedback control in SLS might lead to significant performance improvements in this form of manufacturing.

This …

Application Of Optimal Switching Using Adaptive Dynamic Programming In Power Electronics, Ataollah Gogani Khiabani

Mechanical Engineering Research Theses and Dissertations

In this dissertation, optimal switching in switched systems using adaptive dynamic programming (ADP) is presented. Two applications in power electronics, namely single-phase inverter control and permanent magnet synchronous motor (PMSM) control are studied using ADP. In both applications, the objective of the control problem is to design an optimal switching controller, which is also relatively robust to parameter uncertainties and disturbances in the system. An inverter is used to convert the direct current (DC) voltage to an alternating current (AC) voltage. The control scheme of the single-phase inverter uses a single function approximator, called critic, to evaluate the optimal cost …

Control And Locomotion Of Inertially And Magnetically Actuated Multi-Scale Robotic Systems, Ehab Al Khatib

Mechanical Engineering Research Theses and Dissertations

In this research, two actuation systems were introduced, inertial and magnetic actuation. In the inertial actuation, the robot used the transfer of momentum to navigate, and this momentum could be generated by spinning masses and wheels. Recent studies in our System Laboratory proved that a wide range of inertially actuated locomotion systems could be generated. This can be achieved by using a family tree approach, starting from a very simple system, and progressively evolving it to more complex ones. The motion diversity of these robots inspired us to extend their locomotion from a macro scale to millimeter and micro scales. …

A Perceptual Evaluation Of Short-Time Fourier Transform Window Duration And Divergence Cost Function On Audio Source Separation Using Non-Negative Matrix Factorization, Ryan J. Miller

Student Theses

Non-negative matrix factorization (NMF) is an established method of performing audio source separation. Previous studies used NMF with supplementary systems to improve performance, but little has been done to investigate perceptual effects of NMF parameters. The present study aimed to evaluate two NMF parameters for speech enhancement: the short-time Fourier transform (STFT) window duration and divergence cost function. Two experiments were conducted: the first investigated the effect of STFT window duration on target speech intelligibility in a sentence keyword identification task. The second experiment had participants rate residual noise levels present in target speech using three different cost functions: the …

Dynamic Characterization Of Duroprotect, A Fiber-Reinforced Ballistics Composite, Ivy A. Turner

Honors Theses

Dynamic characterization of materials has become increasingly common, as it is important to understand how materials behave under sudden loads. Understanding these properties can aid in material selection for novel designs. DuroProtect, a fiber-reinforced ballistics composite developed by Rӧchling, was tested for its dynamic properties at high strain-rates. The Split Hopkinson Pressure Bar (SHPB) test was used to obtain dynamic properties at high strain-rates under compressive loading conditions. Tests were initially conducted to validate force equilibriums for each sample. The data measured from the strain gages mounted on the incident and transmission bars and the elastic wave propagation theories yields …

Analog Versus Digital Guitar Pedals, Shaping Guitar Tones And Sparking Debates, Cameron Karren

Capstone Projects and Master's Theses

This paper goes into the history of guitar effects, what exactly they are, how they have evolved, and what they are like today. It also presents the results of an experiment that compares perceptions of differences between analog and digital guitar pedals.

Manipulation And Patterning Of Mammalian Cells Using Vibrations And Acoustic Forces, Joel Cooper

USF Tampa Graduate Theses and Dissertations

Recently, there has been a surge in researchers and scientists investigating different methods which move, manipulate, and pattern biological cells. Multiple different mechanisms can be used for cellular manipulation, microfluidics, biochemical queues, and even optics, just to name a few. However, all techniques have their downsides. A majority of these methods require expensive equipment or reagents and can only manipulate a small number of cells at a time.

Some of the most common cell manipulation devices utilize acoustic pressure waves to move the cells to desired locations. Currently, it is unknown what level of force from these types of devices …

Stability Analysis, Dynamic Modeling, And Kinematic Analysis Of Hydraulically Amplified Dielectric Elastomer Actuators And Robot Manipulators, Amir Hosein Zamanian

Mechanical Engineering Research Theses and Dissertations

In this dissertation, we have proposed a new dielectric elastomer actuator design and model that couples electrostatics, fluid mechanics, linear and nonlinear elastic deformations. The internal hydraulic pressure can amplify the structural deformation generated by induced electrostatic forces (Maxwell pressure), given the name of this class of actuators, hydraulically amplified dielectric elastomer actuators (HADEAs).

First, we developed novel lumped-parameter models (LPMs) using linear and hyper-elastic material models and second compared the LPM results with finite element analysis in quasi-static simulations. We analytically expressed the conditions for the snap-through instability in the HADEA, which appears after exceeding a certain voltage applied …

A Study Of The Aeroacoustics Of Swept Propellers For Small Unmanned Aerial Vehicles, Arthur David Wiedemann

Mechanical & Aerospace Engineering Theses & Dissertations

In recent years, small unmanned aerial vehicles (UAVs) have increased in availability and use in both public and commercial sectors. This increased use of small UAVs or “drones” has the unfortunate consequence of introducing excessive noise into communities where they operate. Implementation of noise reduction methods is necessary if we wish to see expanded use of drones in public areas. With electric propulsion, the primary source of noise is the rotor/propeller used in contemporary multi-rotor configurations. In this thesis, the aerodynamics and acoustic behavior of various swept propellers is examined with computational and experimental methods.

A family of propeller geometries …

Hybrid Non-Destructive Assessment For Flow Induced Vibration Piping Systems Using Coupled Fluid-Structure Interaction, Keen Kuan Kong

Student Works (2020-2029)

Pipelines and piping systems are of great importance in many industries such as water supply, petroleum and petrochemicals and nuclear power generation. They provide transport for high-velocity pressurized fluids operating under time-varying conditions. They are required to operate non-stop for a schedule of 24 hours a day, 7 days a week. Piping vibration failures have been one of the major causes of downtime, fires and explosions in industrial plant over the past 30 years. Failure of piping systems can have disastrous effects, leading to injuries and fatalities as well as to substantial cost to industry and the environment. Flow-induced vibration …

Investigating The Feasibility And Stability For Modeling Acoustic Wave Scattering Using A Time-Domain Boundary Integral Equation With Impedance Boundary Condition, Michelle E. Rodio

Mathematics & Statistics Theses & Dissertations

Reducing aircraft noise is a major objective in the field of computational aeroacoustics. When designing next generation quiet and environmentally friendly aircraft, it is important to be able to accurately and efficiently predict the acoustic scattering by an aircraft body from a given noise source. Acoustic liners are an effective tool for aircraft noise reduction and are characterized by a frequency-dependent impedance. Converted into the time-domain using Fourier transforms, an impedance boundary condition can be used to simulate the acoustic wave scattering by geometric bodies treated with acoustic liners

This work considers using either an impedance or an admittance (inverse …

Dispersion Tuning And Route Reconfiguration Of Acoustic Waves In Valley Topological Phononic Crystals, Zhenhua Tian, Chen Shen, Junfei Li, Eric Reit, Hunter Bachman, Joshua E. S. Socolar, Steven A. Crummer, Tony Jun Huang

Henry M. Rowan College of Engineering Departmental Research

The valley degree of freedom in crystals offers great potential for manipulating classical waves, however, few studies have investigated valley states with complex wavenumbers, valley states in graded systems, or dispersion tuning for valley states. Here, we present tunable valley phononic crystals (PCs) composed of hybrid channel-cavity cells with three tunable parameters. Our PCs support valley states and Dirac cones with complex wavenumbers. They can be configured to form chirped valley PCs in which edge modes are slowed to zero group velocity states, where the energy at different frequencies accumulates at different designated locations. They enable multiple functionalities, including tuning …

Kinematic Analysis Of Forehand Drop Shot And Long Shot Services In Table Tennis, Ibrahim Norzuria

Student Works (2020-2029)

Table tennis is one of the most widely played sports in the world. A frequent hand movement is compulsory to execute stroke than other limbs, especially the projection of racket and ball speeds,which can help to improve players’ performance. Until now, research on table tennis serving is limited. Service was assumed important in table tennis because the effective serve may allow the serving player to have advantage and control over the game. The 3D dynamic analysis is the appropriate method to analyze a sport activity such as table tennis. Therefore, the aim of research was to determine the kinematic involved …

Adaptable Clean Energy Laboratory, Joao Marcelo Rocha Belmonte, Marc D. Compere

Sustainability Conference

The Adaptable Clean Energy (ACE) Lab is a real-world, long term, test platform that will guide the courses of the Energy Systems track. The lab will provide realistic electrical and HVAC loads that mimic a solar powered office. The lab is a 20’ high cube shipping container modified with a door, windows, lights computers, air conditioner and appliances. The lab is Net-Zero and powered entirely from the sun. Two insulation test sections expose the exterior walls for research access to real external heat loads in a real building

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Multi-Objective Optimization Of Multi-Loop Control Systems, Yuekun Chen

Theses, Dissertations and Capstones

Cascade Control systems are composed of inner and outer control loops. Compared to the traditional single feedback controls, the structure of cascade controls is more complex. As a result, the implementation of these control methods is costly because extra sensors are needed to measure the inner process states. On the other side, cascade control algorithms can significantly improve the controlled system performance if they are designed properly. For instance, cascade control strategies can act faster than single feedback methods to prevent undesired disturbances, which can drive the controlled system’s output away from its target value, from spreading through the process. …

Active Noise Control Using Carbon Nanotube Thermophones: Case Study For An Automotive Hvac Application, Walker H. Nelson

Dissertations, Master's Theses and Master's Reports

The goal of this project was to reduce the overall noise levels emitted by the HVAC components in a vehicle’s cabin. More specifically, the feasibility of achieving this goal using two key technologies was investigated.

The first of these technologies, Active Noise Control (ANC), is a noise attenuation technique that relies on destructive interference that “cancels” unwanted noise. Typically used in situations where physical constraints prevent passive attenuation techniques from being used, ANC is known for its high size-to-effectiveness ratio. This benefit cannot be gained without a cost however; the complexity of ANC systems is significantly higher than their passive …

Development Of An Eco Approach And Departure Application To Improve Energy Consumption Of A Plug-In Hybrid Vehicle In Charge Depleting Mode, Brandon Narodzonek

Dissertations, Master's Theses and Master's Reports

A recent study at Michigan Technological University as part of the NEXTCAR DOE APRA-E Project was conducted to determine the potential energy savings of a plug-in hybrid electric vehicle (PHEV) equipped with various Connected and Automated Vehicle (CAV) Technologies. One aspect of this study focused on the development of an Eco Approach and Departure (Eco AnD) Application that would further reduce the energy consumed around a signalized intersection.

Many modern intersections are equipped with traffic signals that can broadcast Basic Safety (BSM), MAP, and Signal Phase and Timing (SPaT) message sets that contain intersection ID, location, current phase, and cyclic …

Numerical And Experimental Studies Of Blocked Force Determination On An Offset Interface For Plate And Shell Structures And Duct Acoustic Systems, Keyu Chen

Theses and Dissertations--Mechanical and Aerospace Engineering

Blocked force determination is an alternative to the more routine method of inverse force determination using classical transfer path analysis. One advantage of determining blocked forces is that there is no need for the source to be detached or isolated from the system. Another advantage is that calculated blocked forces are appropriate when modifications are made on the receiver side of the interface. This insures that the blocked forces are suitable for utilization in analysis models where receiver system modifications are considered. Difficulties in using the approach arise when interface locations are difficult to instrument. This thesis demonstrates that blocked …

Filtered-Dynamic-Inversion Control For Unknown Minimum-Phase Systems With Unknown Relative Degree, Sumit Suryakant Kamat

Theses and Dissertations--Mechanical and Aerospace Engineering

We present filtered-dynamic-inversion (FDI) control for unknown linear time-invariant systems that are multi-input multi-output and minimum phase with unknown-but-bounded relative degree. This FDI controller requires limited model information, specifically, knowledge of an upper bound on the relative degree and knowledge of the first nonzero Markov parameter. The FDI controller is a single-parameter high-parameter-stabilizing controller that is robust to uncertainty in the relative degree. We characterize the stability of the closed-loop system. We present numerical examples, where the FDI controller is implemented in feedback with mathematical and physical systems. The numerical examples demonstrate that the FDI controller for unknown relative degree …