Acoustics, Dynamics, and Controls Commons^™

4. Metadata Files, Zhiqu Lu, Likun Zhang, Lei Cao

Gulf Research Program Data Sets

This data set contains all ReadMe files for test data, modeling data, and localization data, as well as the corresponding codes.

5. Programs And Algorithms, Zhiqu Lu, Likun Zhang, Lei Cao

Gulf Research Program Data Sets

This data set contains all codes for the study.

6. Supplemental Materials, Zhiqu Lu, Likun Zhang, Lei Cao

Gulf Research Program Data Sets

This data set contains all conference presentations, manuscripts, technical reports, posters.

Understanding Of Aerosol Transmission Of Covid 19 In Indoor Environments, Adama Barro, Cathal O'Toole, Jacob S. Lopez, Matthew Quinones, Sherene Moore

Publications and Research

Our reason for discussing severe acute respiratory syndrome corona virus 2 (SARS-CoV-2) or 2019 novel corona virus (Covid-19), is to understand its aerosol transmission characteristics in indoor spaces and to mitigate further spread of this disease by designing a new HVAC system. The problem that we are tackling is the spread of covid-19 droplets through aerosol transmission by looking at potential engineering solutions to the existing HVAC systems. The purpose is to eradicate the spread of the COVID-19 by testing indoor spaces in an effort to understand the effectiveness of ventilation controls. We believe that scientists and engineers have not …

Experimental Investigation Of Liquid Height Estimation And Simulation Verification Of Bolt Tension Quantification Using Surface Acoustic Waves, Hani Alhazmi

USF Tampa Graduate Theses and Dissertations

In this dissertation, two separate applications that are related to surface acoustic waves in a solid media are presented. The first study concerns simulating and validating an experimentally study for quantifying the bolt tension in the bolted joints using the surface acoustic wave. The second study experimentally investigates measuring the level of a liquid existing on a solid surface via surface acoustic waves and exploring the effect of liquid existence on the propagation of surface acoustic waves over the solid surface.

Quantifying bolt tension and ensuring that bolts are appropriately tightened for large-scale civil infrastructures are crucial. This study investigates …

A Comparison Of Localization Accuracy With Binaural Recordings Utilizing A Binaural-Head Microphone And Vr Visualization, Joseph Erichsen

Student Theses

The purpose of this study was to examine the perceived location of broadband signals created via binaural recording and then replicated in a virtual listening space. Listeners were asked to localize an auditory target positioned in one of four horizontal quadrants in three vertical planes. A binaural recording was created in both anechoic and echoic environments and subjective tests were conducted. Tests were repeated, with a virtual reality headset to virtually replicate the testing space. Results showed the effectiveness of binaural recording in recreating the perceived source locations in “3-D” space around a specified listening position in different conditions. Statistical …

Leveraging Abet Accreditation To Promote Inclusion Of Noise Control Engineering Concepts In Engineering Programs, Lily M. Wang, Bryan Beamer

Durham School of Architectural Engineering and Construction: Faculty Publications

Accreditation Board for Engineering and Technology, Inc. (ABET) accreditation is an internationally recognized system ensuring consistency and quality in engineering education programs. As a part of ABET accreditation, there is no set requirement for any general engineering program to include noise control engineering concepts in their curricula. However, one of the seven student outcomes that each ABET accredited engineering program must document is their students’ “ability to apply engineering design to produce solutions that meet specified needs with consideration of public health, safety, and welfare…” Controlling noise in the authors’ view is a fundamental strategy for protecting workers from occupational …

A Quantitative Approach For Tuning A Mountain Bike Suspension, Steven Robert Waal

Master's Theses

A method for tuning the spring rate and damping rate of a mountain bike suspension based on a data-driven procedure is presented. The design and development of a custom data acquisition system, known as the "MTB DAQ," capable of measuring acceleration data at the front and rear axles of a bike are discussed. These data are input into a model that is used to calculate the vertical acceleration and pitching angular acceleration response of the bike and rider. All geometric and dynamic properties of the bike and rider system are measured and built into the model. The model is tested …

Semi Open Partitions: A Defense Strategy For Airborne Disease, Kerrie Marshall, Arik Palileo, Eric A. Schiff

SyracuseCoE

This brief summarizes research on two measures that reduce the risk of transmitting COVID-19 from an infected person to a virus-free individual. Semi-partitioned spaces can reduce airborne disease transmission when combined with a proper ventilation flow pattern in a room. With advanced displacement ventilation risk can be reduced by at least 4 times.

Sound Vortex Diffraction Via Topological Charge In Phase Gradient Metagratings, Yangyang Fu, Chen Shen, Xiaohui Zhu, Junfei Li, Youwen Liu, Steven A. Crummer

Henry M. Rowan College of Engineering Departmental Research

Wave fields with orbital angular momentum (OAM) have been widely investigated in metasurfaces. By engineering acoustic metasurfaces with phase gradient elements, phase twisting is commonly used to obtain acoustic OAM. However, it has limited ability to manipulate sound vortices, and a more powerful mechanism for sound vortex manipulation is strongly desired. Here, we propose the diffraction mechanism to manipulate sound vortices in a cylindrical waveguide with phase gradient metagratings (PGMs). A sound vortex diffraction law is theoretically revealed based on the generalized conservation principle of topological charge. This diffraction law can explain and predict the complicated diffraction phenomena of sound …

Wireless Wearable System For The Assessment Of Gait, Abdallah Jabr

Mechanical Engineering Research Theses and Dissertations

This work investigates the development and use of a wireless wearable system for the assessment of gait. The system proposed consists of a sensor module that is attached to the foot. The sensor proposed is an inertial measurement unit, often abbreviated as IMU - a 9-axis System in Package (SiP) including a 3-axis accelerometer, a 3-axis gyroscope, and a 3-axis magnetometer, as well as a fusion engine for signal processing. While the focus of this work is on evaluating gait metrics, the performance of the proposed IMU in evaluating orientation is quantified. In doing this work, we try to address …

Dynamic Analysis And Fabrication Of A Bi-Stable Structure Designed For Mems Energy Harvesting Applications., Masoud Derakhshani

Electronic Theses and Dissertations

Thanks to the rapid growth in demand for power in remote locations, scientists’ attention has been drawn to vibration energy harvesting as an alternative to batteries. Over the past ten years, the energy harvesting community has focused on bistable structures as a means of broadening the working frequency range and, by extension, the effective efficiency of vibration-based power scavenging systems. In the current study, a new method is implemented to statically and dynamically analyze a bistable buckled, multi-component coupled structure designed specifically for low-frequency vibration energy harvesting systems in both macro and MEMS-scale sizes. Furthermore, several micro-fabrication steps using advanced …

Analysis Of Body And Tail Of A Flapping Drone, Yuan Chai

Student Works (2020-2029)

The Micro Aerial Vehicle (MAV) is a kind of unmanned aerial vehicle with a small size, which has a unique performance that larger aircrafts do not have. MAV can fly in confined spaces and perform hover, forward flight, etc. The flapping wing micro aerial vehicle is one type of flight imitates the insects (birds), which can fly based on the flapping wing. Compared with fixed-wing aircraft, the flapping wing micro aerial vehicle (FWMAV) has a smaller volume, lighter weight, and higher flight efficiency. FWMAV can be largely used in military and civil applications. In this project, the flapping drone is …

Analysis Of One Way Valve Mechanism For Wings Of A Flapping Drone, Xinchen Deng

Student Works (2020-2029)

The flapping drone is one type of MAVs which is defined as a miniature unmanned aerial vehicle that is inspired by flying birds and insects. Flapping wings can make a perfect combination of thrust and lift by flapping up and down with full usage of unsteady air. The flapping drone has the advantages of high maneuverability and a special lift generation mechanism. Compared with rotary-wing or fixed-wing MAV, it is smaller, lighter, and has higher flight performance. It can quickly change the flight direction and flight speed by control the flapping frequency and it is the only flight mode that …

A Computational Study Of Water Mobility On Smooth Surface, Cavities And Porous Structure With Hydrophilic And Hydrophobic Coatings, Kok Wee Yong

Student Works (2020-2029)

This research focus on water mobility and discovers a new phenomenon where droplet accelerates on a hydrophilic cavity surface when sliding down from a hydrophobic surface. The kinetic energy of droplet increases six (6) times higher than before sliding into the first cavity. This finding is useful for creating an effective way of filling liquids into cavities for passive microfluidics related devices. The work consists of validating cases using Computational Fluid Dynamics (CFD) software. The first part of the research reviews the literature regarding CFD modelling of a water droplet (i) sliding down on a surface, (ii) detachment in a …

Modeling Of Heavy Vehicle Braking Related To Accident Reconstruction For A Range Of Vehicle And Road Characteristics, Zamzamzadeh Mahdieh

Student Works (2020-2029)

In today's heavy-vehicle accidents, one of the major contributors is emergency braking, particularly for vehicles without an anti-lock braking system (ABS), which is dominant in developing countries like Malaysia. As the heavy vehicle driver applies emergency braking, there is a high chance of wheel lock-up, at which point the vehicle will skid along the road, creating braking marks from the tires. These braking marks are often used in crash reconstructions. Braking marks are mainly used by investigators to examine the vehicle's pre-impact velocity. There are many models and formulations based on kinetic energy that show the effect of some parameters. …

Data Acquisition, Analysis, And Modeling Of Rotordynamic Systems, Michael P. Mullen

Master's Theses

Data acquisition systems for rotordynamic analysis and machine vibration were explored for the purpose of replacing the obsolete Bently Nevada ADRE 208 and ADRE for Windows system. These included the development of Matlab based custom data acquisition systems and a user interface. A model of an anisotropic rotor response undergoing transient speed was developed for the rapid prototyping and testing of data acquisition systems. Several methods for the measurement of amplitudes and phase in both the time domain and frequency domain were developed and compared. An alternate data acquisition method which is more inline with industry practices was created for …

Vibration Isolation System, Bradley Y. Kwan, Bailey Groh, Max Wu, Nicole Yen

Mechanical Engineering

The Vibration Isolation System Senior Project is a collaborative group project between its sponsor, Maxar Technologies, and a team of students from Cal Poly - SLO to effectively design, manufacture, and test a structural assembly for satellites, isolating vibrations during launch and orbit conditions. After initial sponsor contact, requirements and needs were set which dictated deliverables for the senior project group. The group performed analyses to validate all design decisions, including a modified concept and design direction, selection of a prototype viscoelastic damping material, preliminary testing to validate design specifications, and detailed design and analysis toward a finalized design. Instead …

The Relationship Between Mental Workload And Driving Performance Of Ageing Drivers, Abd Rahman Nurul Izzah

Student Works (2020-2029)

The population of ageing drivers is increasing rapidly. As ageing happened, they are exposed to disabilities due to degenerative processes, thus affecting their driving performance. For changes in driving method or design to occur, ageing drivers’ driving tasks need to be monitored, designed and tested. Comprehensive research needs to be conducted to investigate how to integrate mental workload with driving performance of ageing people. Moreover, there has been no study yet that develop a model to predict overall driving performance in Malaysia. Hence, the main objective of this study is to develop and validate a model which quantifies the mental …

Design Of Structural Stand For High-Precision Optics Microscopy, Sara T. Novell

Master's Theses

Lawrence Livermore National Lab (LLNL) is home to the National Ignition Facility (NIF), the world’s largest and most energetic laser. Each of the 192 beamlines contains dozens of large optics, which require offline damage inspection using large, raster-scanning microscopes. The primary microscope used to measure and characterize the optical damage sites has a precision level of 1 µm. Mounted in a class 100 clean room with a raised tile floor, the microscope is supported by a steel stand that structurally connects the microscope to the concrete ground. Due to ambient vibrations experienced in the system, the microscope is only able …