Study On Spinnability Of Pp/Pu Blends And Preparation Of Pp/Pu Bi-Component Melt Blown Nonwovens,
2019
Qingdao University
Study On Spinnability Of Pp/Pu Blends And Preparation Of Pp/Pu Bi-Component Melt Blown Nonwovens, Yanfen Zhou, Liang Jiang, Huiying Jia, Xiaolu Xing, Zhenhua Sun, Shaojuan Chen, Jianwei Ma, Stephen Jerrams
Articles
Melt blown polymer blends offers a good way to combine two polymers in the same fiber generating nonwovens with new and novel properties. In this study, polypropylene (PP) and polyurethane (PU) were blended to prepare PP/PU bicomponent melt blown nonwovens. The spinnability of PP/PU composites was investigated and PP/PU bi-component nonwovens with compositions of 95/5, 90/10, 80/20 and 70/30 were prepared by using the melt blowing technique. The melt blown fibers exhibited a ‘sea-island’ structure with PP as the continuous phase and PU as the dispersed phase. When the content of PU in the blend was above 40 %, PP/PU …
Stress State Analysis And Tensile-Shear Fracture Criterion In Combined Puncture And Cutting Of Soft Materials,
2019
Department of Mechanical Engineering, McGill University
Stress State Analysis And Tensile-Shear Fracture Criterion In Combined Puncture And Cutting Of Soft Materials, Ennouri Triki, Chantal Gauvin
Études primaires
The mechanics of the combined puncture and cutting of protective materials by a pointed blade are studied theoretically and experimentally, by means of stress state analysis. Through analysis of the stresses occurring during the puncture cutting of a variety of neoprene and nitrile rubber membranes by pointed blades with different cutting-edge angles, a force state of pushing/shear-dependent loading is formulated and discussed. By considering this combined loading as an asymmetric fracture, two equations—for pushing force component and shear force component—are then derived from the stress intensity factors. From this stress analysis, a model based on fracture mechanics theory is developed …
Towards Sustainable Production Of Chemicals And Fuels From The Fast Pyrolysis Of Waste Polyolefin Plastics,
2019
Michigan Technological University
Towards Sustainable Production Of Chemicals And Fuels From The Fast Pyrolysis Of Waste Polyolefin Plastics, Ulises Gracida Alvarez
Dissertations, Master's Theses and Master's Reports
The increasing amount of plastic waste (PW) generation has become an important concern due to the leveled-off recycling rates. Therefore, governmental agencies around the world, including state governments in the United States, have proposed initiatives to minimize the amount of PW that is landfilled and encourage recycling or energy recovery. Circular economy is a strategy that attempts on reusing PW to produce new polymers while avoiding its disposal and the use of virgin material. Chemical recycling raises an interesting technology prospect due to the potential reduction of pollutant emissions and the establishment of a circular economy through the production of …
A Study Of The Effect Of Heat Treatment On 3d Printed Pla Impact Strength,
2019
South Dakota State University
A Study Of The Effect Of Heat Treatment On 3d Printed Pla Impact Strength, Suresh Thota
Electronic Theses and Dissertations
Environmental conditions have a significant effect on the mechanical properties of various materials. Environmental parameters such as temperature and humidity have a major impact on mechanical properties of materials such as compressive strength, tensile strength, bending strength and impact strength. The purpose of this research is to study how temperature and humidity affect the impact strength of 3D printed PLA plastic. Impact strength is the ability of a material to absorb energy subjected to an impact load by a pendulum. In this research, 3D printing was employed to produce PLA specimens which were later used for different experimental testings. For …
A Simple And Robust Approach To Reducing Contact Resistance In Organic Transistors,
2018
Wake Forest University
A Simple And Robust Approach To Reducing Contact Resistance In Organic Transistors, Zachary A. Lamport, Katrina J. Barth, Hyunsu Lee, Eliot Gann, Sebastian Engmann, Hu Chen, Martin Guthold, Iain Mcculloch, John E. Anthony, Lee J. Richter, Dean M. Delongchamp, Oana D. Jurchescu
Chemistry Faculty Publications
Efficient injection of charge carriers from the contacts into the semiconductor layer is crucial for achieving high-performance organic devices. The potential drop necessary to accomplish this process yields a resistance associated with the contacts, namely the contact resistance. A large contact resistance can limit the operation of devices and even lead to inaccuracies in the extraction of the device parameters. Here, we demonstrate a simple and efficient strategy for reducing the contact resistance in organic thin-film transistors by more than an order of magnitude by creating high work function domains at the surface of the injecting electrodes to promote channels …
Polyhedral Oligomeric Silsesquioxane-Phosphate Glass Matrix Nanocomposites With Additional Chapter On Phosphate Glass-Poly(Ethylene Terephthalate) Matrix Composites,
2018
University of Southern Mississippi
Polyhedral Oligomeric Silsesquioxane-Phosphate Glass Matrix Nanocomposites With Additional Chapter On Phosphate Glass-Poly(Ethylene Terephthalate) Matrix Composites, Kyoungtae Kim
Dissertations
Preparation and characterization of tin fluorophosphate glass (Pglass) matrix nanocomposites incorporating polyhedral oligomeric silsesquioxane (POSS) were investigated on the structural, thermal, morphological, mechanical, and rheological properties. Various processes including synthesis, extrusion and sintering processes were applied to prepare the nanocomposite samples. Another application of POSS with hydrophobic functional groups on the well-structured nanoscale silicate cage with three silanol groups was investigated to present the feasibility to use POSS molecule as a coating material on the surface of the hydrophilic inorganic glass. In addition, Poly(ethylene terephthalate) polymer matrix composites incorporating Pglass was studied to present the benefits of the Pglass with …
Hydrogen Bond Mediated Water Structuring, Diffusion, And Elastic Properties In Acrylamide Copolymer Glycohydrogels,
2018
University of Southern Mississippi
Hydrogen Bond Mediated Water Structuring, Diffusion, And Elastic Properties In Acrylamide Copolymer Glycohydrogels, April Levu Fogel
Dissertations
Glycohydrogels have recently gained considerable interest as biocompatible and high water content hydrogels that have similar physicochemical nature to the cell membrane, making them ideal materials for targeted biomedical and personal care applications (e.g., drug delivery systems, biosensors, and contact lenses). Regardless of the specific application, water-polymer and water-water hydrogen bonding interactions have been shown to dictate hydration stability and diffusional properties in traditional hydrogel architectures (e.g., crosslinked HEMA). However, due to the development of glycohydrogel materials within the past two decades, most literature focuses on synthetic techniques and general hydration characteristics. Furthermore, scant literature examines the effect of hydrophobically …
Improving Ductility Of Slender Reinforced Concrete Shear Walls With Frp Sheets And Splay Anchors,
2018
California Polytechnic State University, San Luis Obispo
Improving Ductility Of Slender Reinforced Concrete Shear Walls With Frp Sheets And Splay Anchors, Luke M. Ostrom
Architectural Engineering
The Sylmar earthquake of 1971 caused significant damage to slender, non-ductile reinforced concrete (RC) shear wall buildings in California. A later survey by the Concrete Coalition in 2011, under the guidance of EERI members, indicated that there are over 3000 vulnerable concrete buildings in California [8]. This led to City of Los Angeles (LA) Ordinance 193893 enacted in 2015, which requires mandatory upgrades to these concrete buildings by 2035. Current practice to meet the requirements of this ordinance, with respect to RC wall buildings, involves adding new shear walls to the building plan or increasing the cross-sectional area of existing …
Water Processable N-Type Organic Semiconductor,
2018
University of Kentucky
Water Processable N-Type Organic Semiconductor, Ruben S. Riquelme, Matthew Collins Weisenberger, Camila F. Gomez
Center for Applied Energy Research Faculty Patents
The present invention concerns a water-processable n-type semiconductor comprised of polyvinylpyrrolidone (PVP), carbon nanotubes (CNTs) and poly(ethyleneimine) (PEI). The semiconductors are prepared by providing PVP and CNTs in a hydrophilic slurry and dispersing therein small amounts of PEI.
Mechanical Characterization Of Expanded Polystyrene Spheres Embed Sandwich Composites For Packaging Applications,
2018
Mepco Schlenk Engineering College
Mechanical Characterization Of Expanded Polystyrene Spheres Embed Sandwich Composites For Packaging Applications, Maheswaran R, Arockia Reemas S
Journal of Applied Packaging Research
This paper addresses on study of development of new packaging material comprising Expanded Polystyrene Spheres (EPS) embedded epoxy polymer based sandwich composites with aluminium skin. The density of the packing material is controlled by varying the volume of embedded spheres. In this study, the Flexural and Compression performance of Expanded Polystyrene Spheres (EPS) embedded polymer based sandwich composites with aluminium skin are investigated. The EPS volume percent in the core is 25% with epoxy matrix which makes the the density less than 1 g/cm3 for the composite. The fabricated Sandwich Composite are very light weight, the density is less than …
Controlled Nanomorphology Of Hybrid Organic/Inorganic Multi-Component Composites Through Cooperative Non-Covalent Interactions,
2018
University of New Mexico
Controlled Nanomorphology Of Hybrid Organic/Inorganic Multi-Component Composites Through Cooperative Non-Covalent Interactions, Lingyao Meng
Shared Knowledge Conference
Hybrid organic–inorganic nanocomposite polymers, with inorganic nanoparticles embedded in organic matrix have emerged as a special category of multifunctional materials. With rational materials design, these hybrids can show the synergistic effect of the properties from both phases. Homogenous dispersion and orderly arrangement of the organic and inorganic components are key in their functionalities. By controlling the interface and corresponding interfacial interactions between the organic and inorganic entities, we have developed a logical approach to form stable and controlled hybrid nanofiber structures. We demonstrate the formation of hybrid polymer/quantum dots (or iron oxide nanoparticles) nanocomposites through non-covalent interactions (hydrogen bonding, ionic …
Cementitious Sensors Exhibiting Stopbands In Acoustic Transmission Spectra,
2018
University of New Mexico, Albuquerque
Cementitious Sensors Exhibiting Stopbands In Acoustic Transmission Spectra, Shreya Vemuganti
Shared Knowledge Conference
Ultrasonic monitoring in cementitious materials is challenging due to the high degree of attenuation. In wellbore environments, monitoring becomes more challenging due to inaccessibility. Meta materials, also known as acoustic bandgap materials, exhibit an interesting feature of forbidding the propagation of elastic/sound waves and isolate vibration in a certain frequency band. Traditionally, acoustic bandgap materials are developed with inclusions such as tin, aluminum, gold, steel in a polymer matrix. In this study, we present the development of three-dimensional cementitious sensors capable of exhibiting stopbands in the acoustic transmission spectra using carbon nanotubes. Relatively wide stopbands were engineered using Floquet-Bloch periodic …
A Systematic Investigation Of Condensation Heat Transfer Using Asymmetric Micro-Scale Surfaces,
2018
Louisiana State University and Agricultural and Mechanical College
A Systematic Investigation Of Condensation Heat Transfer Using Asymmetric Micro-Scale Surfaces, Emily Brown
LSU Master's Theses
Asymmetric surfaces been shown to inducing unidirectional motion in the Leidenfrost regime; however, very minimal research has been conducted to investigate whether these surface can enhance condensation through the same means. The investigation of heat transfer of ratchets in condensation is a relatively untapped area of study, specifically ratchets with superhydrophobic properties. Anticipated difficulty lies in creating surfaces features or coatings that retain the ratchets and can adequately sustain optimal wetting state of Cassie-Baxter required to improve heat transfer performance during condensation. This study serves to investigate whether ratchets are a feasible surface feature to enhance condensation heat transfer. First, …
Magnetic Ordering In A Vanadium-Organic Coordination Polymer Using A Pyrrolo[2,3-D:5,4-D']Bis(Thiazole)-Based Ligand,
2018
The Scripps Research Institute
Magnetic Ordering In A Vanadium-Organic Coordination Polymer Using A Pyrrolo[2,3-D:5,4-D']Bis(Thiazole)-Based Ligand, Yulia A. Getmanenko, Christopher S. Mullins, Vladimir N. Nesterov, Stephanie Lake, Chad Risko, Ezekiel Johnston-Halperin
Chemistry Faculty Publications
Here we present the synthesis and characterization of a hybrid vanadium-organic coordination polymer with robust magnetic order, a Curie temperature TC of ∼110 K, a coercive field of ∼5 Oe at 5 K, and a maximum mass magnetization of about half that of the benchmark ferrimagnetic vanadium(tetracyanoethylene)~2 (V·(TCNE)~2). This material was prepared using a new tetracyano-substituted quinoidal organic small molecule 7 based on a tricyclic heterocycle 4-hexyl-4H-pyrrolo[2,3-d:5,4-d′]bis(thiazole) (C6-PBTz). Single crystal X-ray diffraction of the 2,6-diiodo derivative of the parent C6-PBTz, showed a disordered hexyl chain and …
Three-Dimensional Forming Of Multi-Layered Materials: Material Heat Response And Quality Aspects,
2018
Lappeenranta University of Technology, Group of Packaging Technology
Three-Dimensional Forming Of Multi-Layered Materials: Material Heat Response And Quality Aspects, Sami-Seppo Ovaska, Pavel Geydt, Ville Leminen, Johanna Lyytikäinen, Sami Matthews, Panu Tanninen, Malte Wallmeier, Marek Hauptmann, Kaj Backfolk
Journal of Applied Packaging Research
The micro- and macrostructural changes occurring in multi-layered substrates during three-dimensional forming were studied by atomic force microscopy (AFM), scanning electron microscopy (SEM) and optical analyses. Particular attention was paid to heat-induced deformations at the interface between of polymeric coating layer and the paperboard. With excessive heat transfer, occasional delamination of polyethylene terephthalate (PET) coating from the paperboard was observed. The mechanism behind delamination was studied in detail in-situ with an AFM at temperatures relevant to the converting process. Based on the analysis, the delamination could partially be linked to the widening of the initially-existing nano-scale cracks at the coating-paperboard …
Chemically Modified Cellulosic Materials As Multi-Functional Agents In Polymer Composites,
2018
Louisiana State University and Agricultural and Mechanical College
Chemically Modified Cellulosic Materials As Multi-Functional Agents In Polymer Composites, Jinlong Zhang
LSU Doctoral Dissertations
Comparative flame retardancy of micro wood fiber plastic composites (WPCs) with fire retardants (1,2-bis(pentabromophenyl) ethane, metal hydroxides and nanoclay) was studied. The fire additives (1,2-bis(pentabromophenyl) ethane as well as magnesium hydroxide) obviously enhanced the fire retarding properties of WPCs. Especially, 1,2-bis(pentabromophenyl) ethane significantly reduced the total heat release as well as heat release rate. In addition, a synergistic effect of 1,2-bis(pentabromophenyl) and nanoclay was achieved for the enhanced fire retarding performance of WPCs.
A copolymer of cellulose nanocrystals (CNCs) and poly(N-vinylcaprolactam) (PVCL) (PVCL-g-CNCs) for use as thermally-responsive polymers with low critical solution temperatures (LCSTs) was synthesized via atom transfer radical …
Light Intensity-Induced Phase Transitions In Graphene Oxide Doped Polyvinylidene Fluoride,
2018
Tennessee State University
Light Intensity-Induced Phase Transitions In Graphene Oxide Doped Polyvinylidene Fluoride, Yuri A. Barnakov, Omari Paul, Akinwunmi Joaquim, April Falconer, Richard Mu, Vadim Y. Barnakov, Dmitriy Dikin, Vitalii P. Petranovskii, Andre Zavalin, Akira Ueda, Frances Williams
Electrical and Computer Engineering Faculty Research
The coupling of light with low-frequency functionalities of dielectrics and liquid crystals and an ability to turn “on” and “off” the pyro-, piezo-, or ferro- electric properties of materials on demand by optical means leads to fascinating science and device applications. Moreover, to achieve all-optical control in nano-circuits, the coupling of the light with mechanical degrees of freedom is highly desirable and has been elusive until recently. In this work, we report on the light intensity-induced structural phase transitions in graphene oxide doped piezoelectric polyvinylidene fluoride (PVDF) film observed by micro-Raman spectroscopy. Increasing the laser power results in a steady …
Validation Of Wrinkling-To-Delamination Adhesion Measurement Technique,
2018
Purdue University
Validation Of Wrinkling-To-Delamination Adhesion Measurement Technique, Allison Chau, Hyeyoung Son, Chelsea S. Davis
The Summer Undergraduate Research Fellowship (SURF) Symposium
Polymer thin films have a wide range of applications that span several different industries. Their optical clarity as well as their mechanical rigidness result in their versatile use in applications such as contact lenses, wearable sensors, and flexible electronics. These applications require precise adhesion, so the need for a simple, quantitative adhesion measurement technique is critical. Several methods have already been developed that quantify the adhesion of flexible thin films attached to rigid substrates. However, when the thin films are rigid and the substrates compliant, these methods are insufficient. In the authors’ previous work, an adhesion measurement technique was developed …
Developing Strategies To Toughen Bio-Inspired Adhesives,
2018
Indiana University of Pennsylvania
Developing Strategies To Toughen Bio-Inspired Adhesives, Narelli P. Narciso, Samuel Lee Huntington, Jonathan J. Wilker
The Summer Undergraduate Research Fellowship (SURF) Symposium
Mussels and other marine creatures adhere very well in underwater environments, having the ability to withstand the force of the sea. These animals have inspired synthetic biomimetic adhesives for wet systems, presenting potential for biomedical applications. However, most current commercial adhesives tend to be brittle, not resisting repetitive movements. This study assesses toughening strategies to improve the mussel-inspired adhesives’ ductility while maintaining its strength. The strategies included altering the polymer’s chemical structure by changing the percentage of polyethylene glycol (PEG) in the molecule and by adding fillers, such as calcium carbonate, silica and nacre - a calcium carbonate compound found …
Thienoisatin Oligomers As N-Type Molecular Semiconductors,
2018
Purdue University
Thienoisatin Oligomers As N-Type Molecular Semiconductors, Natalie M. Kadlubowski, Xuyi Luo, Jianguo Mei
The Summer Undergraduate Research Fellowship (SURF) Symposium
Organic field effect transistors (OFETs) offer many advantages compared to traditional inorganic transistors, such as flexibility and solution processability. In this study we design and synthesize two thienoisatin-based organic semiconducting small molecules, then investigate their electronic properties in n-type OFETs. To introduce n-type charge transport, electron-withdrawing dicarbonitrile moieties were installed on thienoisoindigo and bis-thienoisatin molecules, which led to a quinoidal conjugation on thienoisoindigo, while maintaining an aromatic conjugation on the bis-thienoisatin. Following the syntheses, the molecules were characterized to determine highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels via cyclic voltammetry, as well as any potential …
