Materials Science and Engineering Commons^™

Effects Of Surface Treatment On Adhesive Performance Of Composite-To-Composite And Composite-To-Metal Joints, Nikhil Paranjpe, Md. Nizam Uddin, Akm S. Rahman, Ramazan Asmatulu

Publications and Research

This study deals with the long-running challenge of joining similar and dissimilar materials using composite-to-composite and composite-to-metal joints. This research was conducted to evaluate the effects of surface morphology andsurfacetreatments onthemechanicalperformanceofadhesively bonded joints used for the aircraft industry. A two-segment, commercially available, toughened epoxy was chosen as the adhesive. Unidirectional carbon fiber prepreg and aluminum 2021-T3 alloys were chosen for the composite and metal panels, respectively. Surface treatment of the metal included corrosion elimination followed by a passive surface coating of Alodine®. A combination of surface treatment methods was used for the composite and metal specimens, including detergent cleaning, plasma …

Development Of Machine Learning-Based Tool For Prediction Of Long-Term Field Performance Of Asphalt Concrete Overlays In A Hot And Humid Climate, Elise Mansour

LSU Doctoral Dissertations

The performance of pavement plays a critical role in Maintenance, Rehabilitation and Reconstruction (MR&R) for highway agencies. Reliable and accurate estimation of pavement performance can be instrumental in prioritization of the limited resources and funding for highway agencies. The latter requires robust prediction models that can handle large-scale, real-world data and can forecast pavement performance in the long run. Unfortunately, the traditional performance prediction models have raised concerns regarding their efficiency and accuracy. It is because these models were based on a limited number of explanatory variables, were not up-to-date and were designed for forecasting short-term (up to five years) …

Understanding The Plastic Issue (Poster Presentation), Regan Bossie, Peter Nguyen, John Mcswiggin, Adam Meadows

Sustainability Conference

The Plastic-Free Campus Initiative is an Embry-Riddle initiative advocating for the reduction and elimination of single-use plastics on the Daytona Beach campus.

Our poster presentation aims to highlight current issues and concerns by presenting plastic production trends, quantifying how plastic pollution has affected global ecosystems, and discussing the material characteristics of plastics and their consequences. The poster will provide an overview of the current state of global recycling and will outline key concerns that microplastics, and plastics in general, pose to public health. By presenting the current facts and concerns related to plastic and recycling, we hope to encourage individuals …

Computational Design Of Complex Concentrated Alloys, Hamid Sharifi

Doctoral Dissertations

A high-throughput parameterization of modified embedded atom model (MEAM) interatomic potentials for combinations of Cu, Ti, Ni, Cr, Co, Al, Fe, and Mn was carried out using a genetic algorithm. Unary systems were parameterized based on DFT calculations and experimental results. MEAM potentials for 28 binary and 56 ternary combinations of the elements were parameterized to DFT results that were carried out with semi-automated frameworks. Specific attention was made to reproduce properties that impact compositional segregation, material strength, and mechanics. Utilizing the MEAM interatomic potentials and a Monte Carlo scheme, phase segregation in the CrNiCo, CuNiCr and CuNiCo fcc alloys …

Machine Learning-Driven Process Analysis And Optimization In Solid-State Welding And Fusion-Based Additive Manufacturing, Radif Uddin Ahmed

Master's Theses

In the modern era of advanced manufacturing, optimizing process parameters is pivotal in ensuring the quality and reliability of sophisticated component fabrication. This study presents a novel, data-driven approach to parameter optimization in two cutting-edge manufacturing techniques: Friction Stir Welding (FSW) and Laser Powder Bed Fusion (LPBF). By leveraging machine learning methodologies, this research addresses the critical challenge of efficiently determining optimal process parameters, a task traditionally relying on time-consuming and resource-intensive trial-and-error methods. This study will lead to a robust data-driven framework for process analysis of more advanced manufacturing techniques like the Additive Friction Stir Deposition (AFSD) process. Friction …

Biocorrosion Analysis Via Multiscale Time Series Analysis, Victor Hugo Mendoza Vejar, Eliseo Hernandez Martinez, Hector Puebla

Annual Symposium on Biomathematics and Ecology Education and Research

No abstract provided.

Biofabrication Of Tissue Constructs Using Protein-In-Polysaccharide Bioinks For Muscle Regeneration, Harshavardhan B

Theses and Dissertations

Myocardial infarction (MI) and volumetric muscle loss (VML) are debilitating conditions that severely affect patient quality of life and challenge healthcare systems, particularly in diagnosis and treatment. Conventional therapies often result in long recovery periods with limited functional restoration. Advances in regenerative medicine, especially extrusion-based 3D bioprinting, offer promising potential to improve the regeneration of complex tissues by precisely depositing cells and biomaterials layer-by-layer to create tailored tissue constructs.

A critical challenge in muscle tissue regeneration is developing protein-polysaccharide bioinks that closely mimic the native muscle tissue microenvironment. In this study, two protein-inpolysaccharide bioinks (alginate-fibrinogen and methylcellulose-gelatin-alginate) were developed to …

Quantifying Chemomechanical Weakening In Muscovite Mica With A Simple Micromechanical Model, Jordan J. Sickle, William M. Mook, Frank W. Delrio, Anastasia G. Ilgen, Wendelin Wright, Karin A. Dahmen

Faculty Journal Articles

In response to gradual nanoindentation, the surface of muscovite mica deforms by sudden stochastic nanometer-scale displacement bursts. Here, the statistics of these displacement events are interpreted using a statistical model previously used to model earthquakes to understand how chemically reactive environments alter the surface properties of this material. We show that the statistics of nanoindentation displacement bursts in muscovite mica are tuned by chemomechanical weakening in a manner similar to how the statistics of model events are tuned by a mechanical weakening parameter that describes how easily system-spanning cracks can be nucleated. Because the predictions of this model are independent …

Metal Additive Manufacturing Of Damage-Controlled Elements For Structural Protection Of Steel Members, Hamdy Farhoud, Islam Mantawy

Henry M. Rowan College of Engineering Departmental Research

This paper develops hybrid steel members by integrating additively manufactured, ultra-lightweight, damage-controlled elements (DCEs) into hot-rolled structural steel members. This approach relies on segmenting a structural member into distinct sections; one or two segments are enlarged to be capacity protected; however, another end or middle DCE segment is optimized to emulate the conventional member’s strength and stiffness. A small-scale DCE was topologically optimized and then additively manufactured using a powder bed fusion technique through a direct metal laser sintering process of 17-4PH stainless steel and then was experimentally tested to study the buckling behavior under compression. The experimental testing of …

Refining Chlorosulfonation Methods For The Synthesis Of A Perfluoroalkyl Arylsulfonimide (Pfsi) Monomer, Ainsley P. Foster, Benjamin Varney, Hua Mei

Science University Research Symposium (SURS)

Proton-exchange membrane (PEM) fuel cells are sources of energy that are clean, quiet, and highly responsive to changes in power needs, making them promising for use in automobiles and other portable power devices. The electrolyte of a PEM cell–the layer responsible for conductivity–is a polymer membrane, commonly consisting of perfluoroalkyl sulfonic acid (PFSA) polymers. Perfluoroalkyl arylsulfonimide (PFSI) polymers are expected to improve the efficiency of PEM fuel cells through optimal stability and proton conductivity. The trifluovinylether (TFVE) aryl perfluorosulfonamide monomer is a new PFSI monomer proposed to fulfill these benefits once polymerized. A six-step synthesis route was initially designed to …

The Effect Of Organic Semiconductor Electron Affinity On Preventing Parasitic Oxidation Reactions Limiting Performance Of N-Type Organic Electrochemical Transistors, Maryam Alsufyani, Benjamin Moss, Claudia E. Tait, William K. Myers, Maryam Shahi, Katherine Stewart, Xiaolei Zhao, Reem B. Rashid, Dilara Meli, Ruiheng Wu, Bryan D. Paulsen, Karl J. Thorley, Yuanbao Lin, Craig Combe, Charlie Kniebe-Evans, Sahika Inal, Sang Young Jeong, Han Young Woo, Grant Ritchie, Ji-Seon Kim, Jonathan Rivnay, Alexandra F. Paterson, James R. Durrant, Iain Mcculloch

Chemical and Materials Engineering Faculty Publications

A key challenge in the development of organic mixed ionic-electronic conducting materials (OMIEC) for high performance electrochemical transistors is their stable performance in ambient. When operating in aqueous electrolyte, potential reactions of the electrochemically injected electrons with air and water could hinder their persistence, leading to a reduction in charge transport. Here, the impact of deepening the LUMO energy level of a series of electron-transporting semiconducting polymers is evaluated, and subsequently rendering the most common oxidation processes of electron polarons thermodynamically unfavorable, on organic electrochemical transistors (OECTs) performance. Employing time resolved spectroelectrochemistry with three analogous polymers having varying electron affinities …

Liquid Crystalline Collagen Assemblies As Substrates For Directed Alignment Of Human Schwann Cells, Homa Ghaiedi, Luis Carlos Pinzon-Herrera, Saja Alshafeay, Leonard Harris, Jorge Almodovar, Karthik Nayani

Chemical Engineering Faculty Publications and Presentations

Collagen is a key component of the extracellular matrix (ECM) and well-oriented domains of collagen are important for mimicking the local cell environment in vitro. While there has been significant attention directed towards the alignment of collagen, formation of large-scale oriented domains remains a key challenge. Type I collagen self-assembles to form liquid crystalline (LC) mesophases in acidic conditions at concentrations above 100 mg mL−1. The LC mesophase provides an efficient platform for large-scale alignment and patterning of collagen coated substrates. However, there still exist challenges related to solubilizing and processing of collagen at such high concentrations in order …

Implementation Of Mash Surrogate Test Vehicles For Sign Supports, Breakaway Poles, And Work Zone Traffic Control Devices, Mahfuza Rahman Doreen

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This describes the development of two surrogate test vehicles, or "bogie vehicles," for performing compliance testing of breakaway devices found on the roadside according to the American Association of State Highway and Transportation Officials (AASHTO) Manual for Assessing Safety Hardware (MASH). Historically, surrogate vehicle testing and approval of roadside structures was not permitted, because critical vehicle behaviors could not be emulated using the existing or modified rigid frame structures. Therefore, Project NCHRP 22-55 was funded to develop two reusable bogie vehicles to emulate the MASH 1100C small car and 2270P pickup truck. This thesis describes the background data collection, initial …

Size And Shape Dependence Of Hydrogen-Induced Phase Transformation And Sorption Hysteresis In Palladium Nanoparticles, Xingsheng Sun, Rong Jin

Chemical and Materials Engineering Faculty Publications

Phase transitions of metals in hydrogen (H) environments are critically import- ant for applications in energy storage, catalysis, and sensing. Nanostructured metallic particles can lead to faster charging and discharging kinetics, increased lifespan, and enhanced catalytic activities. However, establishing a direct causal link between nanoparticle structure and function remains challenging. In this work, we establish a computational framework to explore the atomic config- uration of a metal-hydrogen system when in equilibrium with a H environ- ment. This approach combines Diffusive Molecular Dynamics with an itera- tion strategy, aiming to minimize the system’s free energy and ensure uniform chemical potential across …

Engineering The Coherent Phonon Transport In Polar Ferromagnetic Oxide Superlattices, In Hyeok Choi, Seung Gyo Jeong, Do-Gyeom Jeong, Ambrose Seo, Woo Seok Choi, Jong Seok Lee

Chemical and Materials Engineering Faculty Publications

Artificial superlattices composed of perovskite oxides serves as an essential platform for engineering coherent phonon transport by redefining the lattice periodicity, which strongly influences the lattice-coupled phase transitions in charge and spin degrees of freedom. However, previous methods of manipulating phonons have been limited to controlling the periodicity of superlattice, rather than utilizing complex mutual interactions that are prominent in transition metal oxides. In this study on oxide superlattices composed of ferromagnetic metallic SrRuO3 and quantum paraelectric SrTiO3 , phonon modulation by controlling the geometry of superlattice in atomic-scale precision is realized, demonstrating the coherent phonon engineering using structural and …

Investigating The Effect Of Microwave Pretreatment On Bastnasite Grinding For Comminution Energy Reduction And Rare Earth Recovery, Kaveh Asgari, Qingqing Huang, Rick Q. Honaker, Edward Sabolsky

Chemical and Materials Engineering Faculty Publications

This study explored the impact of microwave pretreatment on the grinding efficiency of bastnaesite ore using a stirred mill. Bastnaesite ore was prepared using a staged crushing and sieving process, followed by microwave pretreatment in a specially designed microwave furnace system. Representative samples of the crushed ore underwent stirred mill grinding, with power draw measurements recorded and adjusted to reflect only the specific energy input required for grinding. Particle size distribution was analyzed periodically using laser particle size analysis. In addition, a Box–Behnken design was used to statistically assess the effects of various parameters on the results, ensuring a robust …

Synthesis And Properties Of (Hf,Mo,Ti,W,Zr)B2–(Hf,Mo,Ti,W,Zr)C Dual Phase Ceramics, S. Filipović, S. M. Smith, G. Hilmas, W. Fahrenholtz, N. Obradović, S. Curtarolo

Materials Science and Engineering Faculty Research & Creative Works

Dense, dual phase (Hf,Mo,Ti,W,Zr)B₂–(Hf,Mo,Ti,W,Zr)C ceramics were synthesized with varying contents of Mo and W. The final (Hf_0.317Mo_0.025Ti_0.317W_0.025Zr_0.317)C–(Hf_0.317Mo_0.025Ti_0.317W_0.025Zr_0.317)B₂ was a nominally pure, dual phase ceramic, while compositions with higher amounts of Mo and W contained multiple phases. The final microstructures had submicron grains due to pinning effects. Vickers hardness values were up to 48.6 ± 2.2 GPa for an applied load of 0.49 N for the ceramic with optimized composition and densification. The solubility limits for Mo and …

Atmosphere Effects In Laser Powder Bed Fusion: A Review, Ben Brown, Cody Lough, Davis Wilson, Joseph Newkirk, Frank Liou

Materials Science and Engineering Faculty Research & Creative Works

The use of components fabricated by laser powder bed fusion (LPBF) requires the development of processing parameters that can produce high-quality material. Manipulating the most commonly identified critical build parameters (e.g., laser power, laser scan speed, and layer thickness) on LPBF equipment can generate acceptable parts for established materials and moderately intricate part geometries. The need to fabricate increasingly complex parts from unique materials drives the limited research into LPBF process control using underutilized parameters, such as atmosphere composition and pressure. As presented in this review, manipulating atmosphere composition and pressure in laser beam welding has been shown to expand …

Anti-Corrosion Performance Of Magnesium Potassium Phosphate Cement Coating On Steel Reinforcement: The Effect Of Boric Acid, Fan Zhang, Jihui Qin, Kangyi Cai, John J. Myers, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

It has recently been found that magnesium potassium phosphate cement (MKPC) paste coating applied on the surface of steel reinforcement can effectively retard the onset of corrosion and suppress corrosion reactions. However, the fast-setting nature of MKPC—which is a merit in repair—can be problematic in a practical engineering process of coating the steel reinforcement with MKPC paste. To address this problem, boric acid (H₃BO₃) was added as a retarder in an MKPC formulation to prolong the setting time. This work investigated the impact of boric acid (at 5% by weight of MgO) on the anti-corrosion performance …

Development Of Multifunctional Wood Composites With Integrated Phase Change Materials For Enhanced Thermal Management, Self-Healing, And Sustainability., Emmanuel Igbokwe

LSU Master's Theses

Abstract

This study focused on incorporating self-healing, flame retardancy, and energy harvesting capabilities into the wood composite to contribute to more sustainable and energy-efficient building practices. Oriented strand board has been widely used as sheath for roofing or dry walls in residential buildings. Residential buildings account for a large portion of energy consumption. Therefore, an oriented strand board with energy harvesting capability is highly desired. Additionally, flame retardancy and damage self-healing and end-of-life recycling are also critical features for buildings.

In this study, we prepared a novel oriented strand board by constructing sandwich structures. The face sheets of the sandwich …